Dead spot or dust?

all of a sudden, I now have a very annoying "blob" on the bottom of my screen. No matter how i try to clean it, it will not come off. Its a small black dot, thats still there even when i turn the phone.
Any ideas?
thanks

How large a spot is this? a single pixel is quite small. I have one on my phone, but it appears to be grey, and I can only see it when the phone is locked, and then just barely. If the mark stays in the same place even when the phone is turned, it could be a bad pixel. There is a web app that you can use to check it. It is called Pixel Fix. You go to it from Safari on the iPhone, the address is
http://www.ebaspace.com/iphone-app/#_home
Try that and just follow the instructions.

Similar Messages

  • How do i fix a dead spot at the bottom of an ipod touch?

    I have a dead spot at the bottom of my screen. I can swipe, put my password in, and slide through the home pages. However, I am unable to select either of the original four menu options (Messages, Safari, Settings, or Music). I dont know what to do, it was literally just working until i recorded a video and it gave me a hard time stopping the recording. Ever since then (about 30 minutes ago) The bottom of my screen has been disfunctional.
    Please help.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings (if you can)
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Dead Spot-Top of the Screen (With: Maps - Stocks - Clock - Safari - iPod)

    Dead Spot-Top of the Screen
    I see some problems with the bottom of the screen but here the problem is with the top of the screen.
    I can't use some part of this Applications, I don't know why, I already reset and restore the iPhone some times, and there is no change.
    Maps - I can't type any direction on the search field.
    Stocks - I can't select the first stock on the list.
    Clock - World Clock - Edit - I can't select the Done button.
    Safari - When the Phone is horizontal I can't select the Add Bookmark or the Back button.
    iPod - When the Phone is horizontal I can't select the play button.
    Please let me know how can I fixed or how can I change my iPhone, I'm working in McAllen Texas and the only Apple Store near to here is the one that is in San Antonio, so its like 3 hours driving, what can I do?

    If they try and make u pay for a loaner phone, be insistant that they give u one free of charge! I had to send mine in for repairs, but talked them out of the $30 loaner phone fee..only makes sense that we shouldn't have to pay! cheers

  • Idvd final project has dead spots in sound

    I recently created a slideshow in idvd where I imported photos and music. The music was downloaded from itunes. When the project was complete and burned to a Memorex write/re-write DVD, there were dead spots in the sound when I played it back on my TV/DVD player. The songs would just cut out for 3-5 seconds, then keep playing. Does anyone have any advice? Could there be an issue with the DVD I chose to use? Could fingerprints on the DVD account for this problem? Should I be looking at the idvd program as the problem?

    Hello, rkotlow,
    Welcome to the discussions.
    First, Memorex disks are notorious for poor performance. You should be using good DVD-R disks such as Verbatim or Maxell. You should also burn at a slower speed, not faster than 4x.
    Make a disk image first, using Disk Utility, that way you can check it to see if there are any audio problems:
    http://docs.info.apple.com/article.html?path=iDVD/7.0/en/6733.html
    You can then burn your disks from within Disk Utility, selecting the burn speed:
    http://docs.info.apple.com/article.html?artnum=93006
    Lastly, many of the audio drop-outs are problems with TV/DVD players, especially with newer ones. I have had problems with a Toshiba, but not with a Sony. You could try your disk in another player, and if it works, then you know your iDVD works fine. I would still burn to a better brand of DVD, though.

  • Digitizer/Dead spots

    i have an iphone it works great in some places but i have a couple of dead spots. the phone,email,safari, and ipod icons dont work at all. since i have these dead spots on the bottom row of the phone and also in the middle of the phone. Would buying a new digitizer make the whole touch screen brand new? or is there any other way to fix this major problem? PLEASE HELP

    Hi,
    Try the general tips in this article: http://support.apple.com/kb/HT1650#faq5
    You can also try restoring the iPhone to rule out software issues. This article: http://docs.info.apple.com/article.html?artnum=305744 will walk you through restoring the iPhone.
    If the issue persists the iPhone will need hardware repair. You can get the iPhone repaired or replaced by making a reservation to have a Genius at a local Apple retail store take a look at it or calling AppleCare.
    http://www.apple.com/retail/geniusbar/
    U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
    If the iPhone warranty or AppleCare Protection plan has expired, the iPhone can be repaired for a Out-of-Warranty Repair Service fee listed here: http://www.apple.com/support/iphone/service/faq/#warranty7
    -Jason

  • Friend suggested I use Airport Express to extend my network to fix dead spots, should I just plan on replacing existing Netgear and buy two AXn's?

    I have a few dead spots around the house and I am seeking a good solution without pulling ethernet cable.  Reading this community it would seem best if going with Airport Express solution to replace my Netgear and pick up a couple of AXn's. Or perhaps Airport Extreme for base at cable model and AXn for extension?
    I had assumed I could just configure one AXn and put it in the dead zone, but reading configuring roaming network indicates you need two. I was planning on adding Apple TV in extended zone does this change anything?

    There are a number of possibilities of using multiple AirPorts to extend the wireless range of your network without using wires. Please check out this Apple Support article for more details.
    Since your goal is to use wireless connections between routers, you will need two or more AirPort to accomplish this. Unfortunately, extending the Netgear by wireless will not work due to WDS compatibility issues between router manufacturers.

  • I have a Dead Spot in the Tone Curve

    I have noticed when using a tablet while working in LR5 I have a dead spot in the upper part of the curve near the highlights portion. I thought it was just a result of my tablet being old and a cheaper model. I tested it with a new Intuos 5 Touch and had the same problem. I go to drag down or up on the upper part of the curve and it doesn't move or hangs up. It happens in all RGB channels also. Has anyone else had this problem or know why this happens? Thanks!

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.

  • IPhone 5 Dead pixel or Dust? Need HELP!!!

    Hi guys,
         I'm getting paranoid with the one tiny black dot on the screen of my one month old iPhone 5, I don't know if it is a dust/speck or dead pixel inside the screen. I can notice it with white backround or any light colored background. I am very familiar with the stuck pixel, but this is the first time I encounter suspected dead pixel. Can anyone tell me how to determined/differentiate a dead pixel or dust inside the screen? I also check the screen on sleep mode, as far as I can see there was no dust on that area.
         Additionally my iPhone has a rattle near the rear camera like clinging sound, how true that is it really normal? They say it's the camera autofocus mechanism??
    Thank you,

    Alright. Whenever I tilt the phone on any side the dark dot sometimes change color like green, black, red. I wonder why i can't even see it right in front display (like normal holding the phone when reading texts or emails). I can barely see it when tilting to different angles. What do you think it is? Sad to say there was no apple store in our country to dropped by and to check my phone by an expert ot technician.
    Appreciate your help dude..

  • Dead pixel or dust under screen

    I purchased ipad mini at staples.ca recently and just realized the screen has small factory defect, either a dead pixel or dust under screen. Seems just passed staples.ca's refund exchange period. what can apple do?

    athleticswallow wrote:
    what can apple do?
    I would bring it to your nearest apple store or AASP and have them look at it.  We can not predict what Apple may or may not do.  good luck.

  • Help-Dead spots on my Screen

    My iphone is experiencing dead spots on the top portion of my screen. My dilema is that I bought this iphone and move to Canada this year, now i am worried that my phone will not be covered by warranty. Can anyone please give me some suggestion or help?

    Those are dead pixels. Take the phone to an apple store and set up an appointment with a genius bar member. They will most likely give you a replacement phone. The dead pixel is hardware issue and cannot be cured by software

  • My iPhone 3GS has dead spots on the left side of the screen, does anyone know how this problem has started or how I can fix this?

    Over the past couple of months, my iPhone 3GS has had dead spots on the left side of the screen, preventing me from using the r, d and x keys, the number 4 and the semi colon and comma keys. Does anybody have any ideas on why this has happened or any ideas that I'll be able to fix this problem?
    Just a note; I can't put my phone to sleep or turn off as my lock button isn't working, so I'm using the AssistiveTouch settings.
    Thanks.

    hannahhfoskett wrote:
     I would gladly upgrade to the next model if my contract was due!
    This has no impact on the ability to purchase a new iPhone... it simply means that the newer one will not be at a fully subsidized price.
    You could always take it to Apple and do an Out of Warranty exchange (I'm assuming the device is out of warranty) for $149 US.

  • Dead spots and pops.

    Hello everyone
    Well I'v been using Logic Pro 7.2 for a couple months and loving it. I don't have a high-end studio just my G4 Powermac 2x 1.6, 1.5 gig of ram. but Im starting to notice when play some EXS24 sampler or my plug-in's Im getting pop's or cut out in sound while playing. Now I was told that my internal sound card build in my G4 should be ok(digital Audio). But is this being caused by not having a better sound card. Since Im learning and don't need high end system, could this be stopped by getting a AudioPhile 192 sound card. For the price it seem pretty good, or maybe not I could be wrong. All i have is my midi keyboard and padkontrol and I just want to be able to play all sample with out hearing dead spot while playing or click and sometime pops. It seems like when i get to 8 voices ,but most of the time it never goes past 11 voices, that when I start to hear it. But not all the time. OK well I would love anyone feed back,
    thank you for your time.
    G4(DA)/2x1.6 Logic Pro 7.2.3   Mac OS X (10.4.8)   Logic Pro

    Hi Carl,
    On my tower ( similar to yours ) I could do about 500 voices ( quick test ) using internal audio system 256 and 48000 - this system is well optimized for audio and Software development... but you should not get 2% the polyphony I do. In fact, that setting performed better using internal ( vs, internal ) for the test... whatever. The real problem lies somewhere in the setup, settings...
    How many drives are you using?
    What does Activity Monitor tell you is happening? - anything suspicious?
    If you may say your lso originated from a session that could be old, run setup asst and create a new one - usually, performance will be better with a fresh template. I have recieved windows sessions and worked with corrupt sessions that behaved this well...
    any 3rd party AUs at the time this happens?
    Are you reading your samples of the System Volume or a volume on the same drive?
    Tried this with Virtual memory ( for EXS24 ) on? off? - if on, configure it to allocate the most memory.
    Any other audio apps?
    How do you fare in GB? ( GB's sampler is essentially an EXS24 engine in a box with a white label and plain black letters - just a generic UI over the sampler engine )
    J

  • Dead spots on touch screen, but only when using text or safari

    For some reason my phone has dead spots, which CHANGE although one thing is consistent. I cannot press "send" on a message unless I am replying to a text straight away. I cannot initiate and then send.
    What is stranger, is that if i pull up the SAME keyboard on the facebook app, it works perfectly.
    So far i have tried recalibrating, resetting and restoring the phone to no effect. If has not been in water (unless splashed unbeknowns to me)
    Has anyone had a similar issue and how did they fix it? My iphone is 3rd gen so no warranty but was in perfect working order until yesterday.

    I can certainly understand your frustration. I have not heard of any other cellphone or PDA manufacturer that gives out free loaners while their equipment is being replaced. Although I have certainly heard about this practice in BMW and Mercedes dealerships, the cellphone/PDA industry is a little different.
    I am surprised they had never heard of the problem, which probably means they have never visited this forum. I have read many posts regarding this problem, and if a reset/restore doesnt do the trick, it has always required repair or replacement.
    Its the same with a Treo or a Motorola Q or a Blackberry. It is not reasonable to expect the manufacturer (Palm, Motorola, etc) to provide free loaners. The cost for this "free" service would inevitably have to be passed on to all buyers. I have a cheapy GSM phone in a drawer I use to stick my SIM card in when I don't want to use my iPhone, or in the event I have to send it in for repair. Having that alternative is my responsibility, not Apple's.
    Now that I think of it, Palm doesnt even rent loaners. I would have been stuck with NOTHING had my Treo required service. At least Apple gives me a better choice.
    That's another spin on it.

  • Dead spot on nano 7 the play/pause button on LCD non responsive

    non responsive/dead spot on nano 7 the play/pause button on LCD

    I was also experiencing this. I'm using a MacBook Pro, and iTunes 7.6(29) in Leopard. Clicking the pause button didn't work, but the spacebar does, as does the remote control.
    One thing that seemed to work was pressing forward / backward instead. After I did that, pause button in the mini player functioned as expected, even after expanding to full-size and back, and after starting and restarting iTunes. I have not seen what happens after starting / restarting my machine yet.
    Worth a shot, anyway.

  • Ipod touch Screen Dead Spots? (*Video Included)

    I have a 16 Gig 1G ipod touch .. my problem is that my touch screen has glitchy/ dead spots my whole top row of the keyboard will not work to my touch anymore unless i stit there and tap the letter P or any top letter for 1 min. i can not reorganize my bottom row or feature row on the wiggle feature . everything else works fine but also some times when i scroll the scroll is a little glitchy and might select something i did not choose. NOTE: i have restored my ipod and upgraded to 3.0.. still the problem exist. i noticed after i pluged my ipod into a sound dock stero the day after. VIDEO
    http://www.youtube.com/watch?v=aAsfg6x_4Rg
    Message was edited by: Symonds2309

    trust me i reste it multiple time.. and finally restored it a couple weeks ago but nothing my whole top line of my keyboard is dead and wont type..

Maybe you are looking for

  • Issue in Clustered environment DB adapter Polling

    hi all , i have a table and one BPEL process is polling records depending on status value . Polled records are updated from N to P after polling . but , In cluster environment for One Row Multiple Instances are creating . Is there any way to ensure t

  • CO_ITEM has not been archived some data.

    Hi, expert I've archived via CO_ITEM  object for 2006.6. Of course I've already completed archiving ~2006.5. But still some of records are not archived. So, I've checked value type of CO line items(COEP) at SE12 Those value types were parked document

  • Iphone disabled connect to iTunes- not possible

    updated iphone and forgot passcode, it now says iphone is disabled connect to iTunes but when i connect to iTunes it tells me to enter the passcode which i can no longer do. I have tried to restore the iPhone but when it gets down to the final 20 min

  • Total on First Line in ALV...........

    Hi Experts, I was written a ALV report and it works fine but the user want the total should be appear on first line. How to bring All Totals on First Line in ALV default...? Thanks, Yusuf

  • Adding dynamic columns to region

    I have four tables named projects,Sharedservices,Characteristics,Quantitystructures. The Sharedservices and Characteristisc tables are linked together using Sharedservice Id field. The Quantitystructures table is linked with Projects and Characterist