Dead stock report - tables regarding
hi ,
i need the name of the table and the key field which used to take the dead stock report.
i.e. 6 months non moving materials list i want with stock values.
kindly forward your suggestions.
Giri
Hi ,
The tcode which you have provided is useful.....but i require the table and the field which required to generate the report....
My purpose is : basiscally i am generating the list off materials which is not consumed for more than six months..... )
do we have any table which stores data in the following format required by me ...
Materialno,plant,stock,last_consumed_date...
For your information -we can get this information from Goods received table and calculate it.... but this is a time consuming process.... that is why i am looking for a materialwise last consumption date.
looking forward to your suggestions further
Similar Messages
-
Dead Stock Report Analysis in MC50
Hi expert
i am trying to work om Dead Stock Report. i had Run a Tcode MC50, in the report i have fine following
MAterial No----
10000
Current Stock----
6,215.327 KG
Average Stock----
6,215.327 KG
Dead Stock----
6,215.327 KG
Dead Stock Value----- 17,533,120.07 INR
Percentage----
1.95 %
*** Percentage.-------18.80 %
i want to verify all that above , data ic showing correct or not
i have check in material master, i am getting
Moving price -
254.93
Total stock -
1115.463
Total Value----
284364.78
in MMBE total Stock is showing is 6597
regard
nabilhi,
MB51 or mmbe
sans. -
Hi,
We want to convert some LIS-reports, like "dead stock" and "Inventory turnover" to a BW report. I have activated InfoCube 0IC_C03.
Does anybody have experience to create a "Dead stock" report in BW(Dead stock is the part of your warehouse stock that has not been used for a certain period of time.)? Which info cube is used?
Regards,
WimHi,
I Hope, Slow moving materials (0IC_MC01) Multi provider will help you.
http://help.sap.com/saphelp_bw32/helpdata/en/40/cb051118bd3549a9e39958561fdf8e/frameset.htm
Re: How to display Fat/Medium/Slow moving materials in Query
With rgds,
Anil Kumar Sharma .P
Kindly Assign the points,If it give you some light
Message was edited by: Anil Kumar Sharma -
Good day to all.
We use the MC50 report to identify obsolete stock. We use a one plant system with various storage locations dispersed throughout the geographical area of our company. The problem we have is that the MC50 report as input parameters requires the plant and cannot be run per storage location, thus identifying obsolete stock per such location.
We are considering a customization but have been advised that the development will require extensive development as result of the main program having several includes which contain SAP standard function modules.
We are attempting to establish if there are other SAP users who encountered the same scenario and if so if there is not perhaps a simplified solution to extract the obsolete stock report per storage location as opposed to plant level.
Best Regards
Mike Olwagen
Manager SAP Solution Support
City Power Johannesburg (Pty) LtdHi,
In this regard to my understanding, we may use BI reports to extract the Dead Stock per storage location.
The Plant having the SLoc data can be pooled in the BI Interface, wherein selection criteria will be there to select respective SLoc having the Dead Stocks. The tables can be customized according to the requirement of the user in BI reports.
Regards,
Dhrubajit -
Slow Moving/Dead Stock Report
Hi Guys
BEsides T.COdes MC46 and MC50 what other reports that are available on SAP to give the same information and also their Current Stock Balances
VishnuHi,
Why do you need other reports?
What is it that these reports cannot provide?
If we can know what you want from the report we can perhaps suggest options. But these two reports are designed to provide the information relating to slow / dead stock and so they should be very useful?
Steve B -
Dead stock or slow moving items reports
tell me any standard report t.code for dead stock or slow moving item..?
actually in our system mc50 is not working...in selection field it pick only one material ..not by material group so how i can get the dead stock report?
Regards
Rekha sharmapls tell me the input selection field for mc46...
scope of ranking list
no. of days up to last consumption from--to--
actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
regards
Rekha sharma -
what is the logic of dead stock report that is MC50,
what is the logic of slow moving stock report that is MC46,
and do we have any standard report for fast moving stock as well ?Hi Rahul
Materials that have been consumed little or not at all over a long period of time are referred to as slow-moving items
Dead stock is the part of your warehouse stock that has not been used for a certain period of time
for further details pls refer
link:[http://help.sap.com/saphelp_45b/helpdata/en/c1/376130449a11d188fe0000e8322f96/frameset.htm]
T code :MC44 for fast moving stocks
Thnx and Regards
Vikrant -
Dear Frndz,
What is the T-code to view the system in-stock report.
Regards,
SriniHi,
In MMBE, enter material name, plant & storage location and click execute.
Double click on the storage location, you will get a complete list with the different categories in which the stock is available (unrestricted stock/ blocked stock/ sales order stock, etc...)
Regards,
Ashok -
Hi Expert
Please Help Me ......
I think dead stock is non-moving for time of period but I don't understand MC50
when I run MC50 in period of time 02/01/2008 - 09/04/2008.
I find stock movements for material :
Posting Date GR GI Stock level
26.12.2007 2 1 1
04.01.2008 2 1 2
07.01.2008 3 1 4
29.02.2008 0 2 2
03.04.2008 10 0 12
09.04.2008 0 0 12
I don't know why 's dead stock for time of period have transaction movement ????
Thank.Hi,
Dead stock is the minimum stock maintained for the period you analyse.
If you keep change the period range the Dead Stock value may also keep change, because the min. stock qty. for each period range might have changes.
If a material was not used for 1 year ( ex: qty. 100), if you run the dead stock report for any of the last 12 months , system will show the same value...
Hope it is clear.
Thanks,
Kumar Arcot -
HI..
i m an abaper...
i hv to show dead stock and dead stock value in a report for a given period of time here i m using table mbew but in this table only the current stock is given so how will i show it for a period of time suppose from july to dec..should i add some logic for it or can i use another table....how do u calculate dead stock and dead stock value for a given period of time....plz help me
nullHi
please check this:
http://help.sap.com/saphelp_46c/helpdata/en/bd/a140eb44d511d188fe0000e8322f96/frameset.htm
click on Document Evaluation: Overview
regards
Srinivas -
Stock report for Stationery or Table to use
Hi SAP Gurus
I would like to run a report for all stationery by plant and storage location.
Use a table that can give me a detailed report of Stationery stock on hand
Regards
SusanHi,
you can get all the Stocks available at Storage by MMBE Tcode or you can use MARC or MARD tables to view material in Storage.
regards.
Ninad Kshirsagar -
Project Stock report using QBEW and QBEWH tables
Dear All,
First of all Happy New Year to all of you.
Here is my question: I want to build a ABAP report for stock situation for project stock. The report demands the stock by closing month. Suppose I run the report for month 11/2010, it should show the closing stock at the end of the month 11/2010.
Now I am using the values from table QBEW for this purpose.But QBEW table shows only current entries. If a material stock is changed or value is changed, it goes into history table QBEWH.
Now problem is that if I try to make sum of QBEW and QBEWH, the stock value is excessive. Now I am not sure which entries I should consider from QBEWH table for this purpose.
Has anybody worked on similar requirement?
Thanks in advance!
Regards,
Mahendra DigheHi,
Please try the report S_P00_07000140 - Inventory and Raw material for special stock report.
Thanks.
abdul -
Report on Dead stock and Slow moving stock
Hi ,
On of my cleints requirement is to see the list of Dead stock and slow moving stock
I tried T.COde Mc50 and MC46 but I could not understand the report fully
In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
How does system identify an item as dead stock.
Is there any setting to define an item as dead stock before running report MC50?
In case of slow moving stock ,i want to see all the material for which no posting
happened for 60 days.In this case what value I need to select in T.Code MC46
Thx in advance
DevaHi,
While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
And execute with the other selection parameters.
Regards,
DilliB -
Stock Analysis : Dead Stock : More than 60 Days.- Report
Dear SAPians
Good Evening
I need a SAP report i want to know if there is a SAP standard report i dontr want to have a Z-Report. My requirement is
<b>Stock Analysis : Dead Stock : More than 60 Days.</b>Required Fields are
<b>Item code Description S.Loc Qty Value.</b>
Pls ssuggest me .
Thank You
with regards
Moosa Anis
+91 9922 577 477 / +91 99608 47444MC50 or MB5M use for dead stock
-
Tables req to get date wise stock report
Hi
Pls advise, what are the tables req to get date wise stock report??? i don't want any t codes... i have to do with age analysis ,??
Anyone has answer? pls provide it.
Edited by: UJ on Mar 3, 2010 8:54 AMYou can take below details which help you to get the exact things..
*-- Tables delcaraion
TABLES : mkpf, " Header: Material Document
mseg, " Document Segment: Material
mara, " General Material Data
makt. " Material Descriptions
*-- Types declaration
TYPES: BEGIN OF ty_mkpf,
mblnr TYPE mblnr, " Number of Material Document
mjahr TYPE mjahr, " Material Document Year
blart TYPE blart, " Document type
budat TYPE budat, " posting date
END OF ty_mkpf.
TYPES: BEGIN OF ty_mseg,
mblnr TYPE mseg-mblnr, " Number of Material Document
mjahr TYPE mseg-mjahr, " Material Document Year
zeile TYPE mseg-zeile, " Item in Material Document
matnr TYPE mseg-matnr, " Material Number
bwart TYPE mseg-bwart, " Movement Type (Inventory Management)
dmbtr TYPE mseg-dmbtr, " Amount in Local Currency
menge TYPE mseg-menge, " Quantity
lgort TYPE mseg-lgort, " Storage Location
pbamg TYPE mseg-pbamg, " Quantity
werks TYPE mseg-werks, " Plant
ummat TYPE mseg-ummat, " Receiving/Issuing Material
umwrk TYPE mseg-umwrk, " Receiving/Issuing Plant
umlgo TYPE mseg-umlgo, " Receiving/Issuing Storage Location
END OF ty_mseg.
Further if you want you can play with Movement types.
Maybe you are looking for
-
Hard drive crash trying to update iTunes with my iPod
So my hard drive crashed all data on it erased, have most of it backed up except for more recent songs in iTunes, which are on my iPod. How do I transfer my iPod data to my newly installed iTunes?
-
I am currently using windows 8.1 and also have a norton antiviurs software installed.
-
Exporting sound track from DVD to Itunes.
I recently purchased a DVD and wanted to put the sound track on my iPod Nano (4th Gen0. Is there is way of doing this ?
-
Physical query not accessing Fact Table/Column
Hi, I'm facing a weired issue. I have a report with 32 columns. 22 columns are from 8 dimensions and 10 columns from 3 Facts. But while observing the Physical query. Its not touching 1 particular Column coming from 1 Fact Table. So, in the query only
-
Hi, I am an sap newbie I am creating a web repository in KM. This is the scenario I want: I want all html pages contain within a website (ie. http://www.xyz.com) to be stored in the repository. So I created an HTTP system to http://www.xyz.com and t