Deadline monitoring is not working

HI,
i had requirement to change the text displayed in the decision step type. I copied that task using pftc and changed the description and i replaced the new task number with old one. the deadline monitoring is not working for the new task .
Please anybody have idea about why deadline is not working for the new task ?
advance thanks
regards
paveee

Hi Praveen,
Deadline is failing only for this workflow? Or is it failing completely in the whole system. Just create a small dummy WF with a standard decision step (or some acitvity) with deadline monitoring activated and see if it fails there also.
<b>If deadline monitoring is failing in all workflows</b>
Can you just check whether the scheduled report RSWWDHEX are executing properly. You can check it in SM37 for user WF-BATCH. Also check in ST22 if there are any dumps for report RSWWDHEX (for user WF-BATCH).
<b>If deadline monitoring is not failing in other workflows</b>
In your activity where you have put your cutom task goto the "Outcomes" tab an check if the outcome for your deadline monitoring is "Active" (This may not change but just have a check)
Also can you let us know what are the steps that you are using in your modelled outcome? Just suspecting if the first step in your modelled outcome is going to error (which is not displayed in log).
Thanks,
Prasath N

Similar Messages

  • Modeled Deadline monitoring is not working

    In workflow i have used modeled Deadline monitoring  for the task, in modeled branch i put a send mail step
    in that branch that is working fine.  once the deadline is reached that workitem is not disappearing from users inbox and modeled branch is working fine , what could be the problem  please suggest me.

    Hi,
    Refer below link  and fix it
    [Link1|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/303617cf-73dd-2a10-c993-cc6303585176] [Link2|https://wiki.sdn.sap.com/wiki/x/EwEqB] [Link3|https://wiki.sdn.sap.com/wiki/x/fQDDAw].
    Regards,
    Surjith

  • Dead Line monitoring is not working

    Dear Friends ,
    I have the belwo issue in my workflow .  Deadline monitoring is not working in my workfloow.
    Details of the Issue : --
    I have a Dialogue step in my workflow , which sends workitems to the user .
    Once workitem has cometo the user's SAP inbox it is in ready status . The user has not taken any action on that .The time perido mentioned in the " LATEST END"  is 2 minutes , so the workitem should show  " The follwoning deadline was missed latest end " for that workitem in theuser's sap inbox .
    But this is not happening .
    I have used this deadline monitoring concept many times , but i do not know wht is happening here .
    Can any body please help me on this to sort it out .
    Reagards
    Prabhudutta

    Hi Prabhudutta,
    I think you have done all the necessary steps!
    In such case what I feel the problem could be because of some minor thing that we might be missing...
    Can you please check the below link and confirm if you have followed all the steps that it states:
    http://****************/Tutorials/Workflow/DeadlineMonitoring/DM1.htm
    Hope this helps!
    Regards,
    Saumya

  • UCCX: Silent monitoring is not working and recorded file is also not playing

    Hi,
    Running UCM 8.5 cluster with UCCX 8.5.
    In CSD, silent monitoring is not working.
    Windows XP OS is running on supervisor desktop. when i select the agent
    then the silent monitoring icon will highlighted once i click on the icon,
    after 5-7 seconds i am getting an error "Silent monitoring session has
    failed".
    Not able to playback the recorded files:
    I can able to record and the file size is 2.6mb for approximate 3min
    recording.When i tried to play from supervisor record viewer it is playing
    but no voice is coming. And i downloaded using play & save option and
    tried to play the .wav file but i can't hear any voice.
    Problem is while playing back the recorded file. I can able to see the
    recorded files in the UCCX.
    Please help me out!!!
    Thanks & Regards,
    Krishna

    It's likely the same problem: CAD is not forwarding packets to CSD or the CCX recording service. Two common causes for this are:
    The phone is not spanning to the PC port or does not allow PC Port VLAN Access. Change these options to true on the phone's configuration in CUCM.
    The NIC of the agent's PC running CAD is not processing 802.1q-tagged Ethernet frames. It must not drop these and pass them into the Windows NDIS stack for CAD to get them. Google is your friend here; this commonly requires registry changes to make the NIC process the packets.

  • HT6065 I have a problem with my Mac book pro, my external monitor is not working and i need it to do my business. Please can someone help me with this.  I am running windows 8 on parallels.

    Since I have up dated my Macbook pro, my external monitor does not work. Who can help me

    It was working untill i did the update

  • My w2207h HP Monitor is not working on my macbook pro with hdmi minidisplayport adapter. On Windows 7 via bootcamp it works. What can i do ?

    As is said my HP w2207h monitor is not working with a minidisplayport to hdmi adapter and a hdmi cable which is working fine for my PS3. So the cable is not the problem. And on my TV i also have no problems at all activating a second monitor. Therefore the adapter isnt the problem either. When i plug it in the typical bluescreen appears. Then after a few seconds it appears again and there is no second monitor recognized. I also used the "recognize Monitor" button without success. Please help me, are there any special drivers or something like that ?
    PS: bought a high end expensive adapter now because the old one was very cheap. But didnt help. Still stuck on the macbook not recognizing anything !

    If you have an external drive you can hook up to the MacBook Pro I believe there *may* be a solution by getting an image to the MacBook Air.
    On the MacBook Pro with the Windows install disk in the DVD drive fire up disk utility.  Select the DVD and then hit the "New Image" button.  Disk Utility should offer to create a disk image from the DVD.  I would put that disk image on a USB drive connected to the Pro.  You should be able to mount that image when you connect up to the Air.  Hopefully BootCamp will be able to access that all through the process.
    If that doesn't work (the drivers don't recognize the disk image once Windows gets underway for its install), you might try copying the installation files from the DVD to FAT32 formatted USB stick or drive and then using that to install Windows.  I would expect Windows would be able to see the USB FAT32 drive and I don't believe any file on the drive is going to go beyond 4GB. 
    I haven't actually tried BootCamp on the Air, since I just use VMWare which has no issue installing from anything OSX can see.  But BootCamp is going to eventually hand off operations to Windows and that's going to complicate matters--Windows has to be able to see the drive.  While I believe there are drivers that let Windows connect to that drive, there's no way to authenticate (or even load the drivers I expect) before Windows itself is loaded--so it's a "chicken/egg" problem.

  • Sql Monitor is not working for forms10g

    Hi All,
    Sql Monitor is not working for forms10g.How can i solve this problems.
    Regards
    Gopinath M

    using sqlmonitor i have traced the forms 6i (.fmx),in this case toad additional
    software sql monitor is automatically added the frmbld.exe in application.
    whatever i am doing in forms runtime the sqlmonitor provide the sql query.
    for examble i am opening the lov with the help of F9.Now the sqlmonitor trace
    the sql query for that lov item.so its very helpful to see the query without
    the source(.fmb).
    Now the problem is the sqlmonitor is not added the iexplore.exe in application.
    because it added frmbld.exe only not for iexplore.exe.but the 10g forms are
    running from the explorer.is there any other forms trace method is available
    pls kindly guide to me.

  • Component monitoring is not working sap pi 7.31

    hi friends,
    we are using PI 7.31. after restarting the system suddenly component monitoring in (NWA--PImon) stopped working and even RWB -->component monitor is not working. No users are locked(RWBUSER,AFUSER)...and remaining all webpages are opening except this.Inside Exchange Profile we have user FQDN as well. SLDCHECK working fine and SM59 Destinations also working fine,
    i am getting HTTP 500 connection timed out error.
    please suggest me.
    thank you
    regards,
    loordh.

    hi Iñaki Vila and Jannus Botha,
    thanks for your replies.
    i am getting  below error when i checked NWA logs and OS level logs
    Exception caught by adapter framework: java.io.IOException: invalid content type for SOAP: TEXT/HTML; HTTP 500 Internal Server Error
    and regarding notes, i verified all and settings were OK and after PI restart as well no issues.
    please tell me some more places where i can see.
    regards,
    Loordh.

  • Silent monitoring is not working

    Silent monitoring is not working, sometimes it work for some and others time it does not.
    CCM ver 7.1.x
    IPCC Express 7.0.x

    - What kind of monitoring the ystem is configured for (server based or desktop ? )
    - what it fails do you see any errors on the CSD  ?
    - are agents in the same location as supervisor ?
    Regards
    Anuj

  • Secondary monitor does not work after OS X install

    My secondary monitor does not work well after OS X install. The image on my secondary monitor is different even the screen svaer image is different and the mouse can not be seen.

    Try the easy thing first - NVRAM reset:
    Shut down your Mac.
    Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    If that does not work, post back with more info, including the version of Mac OS you are running. How is the external monitor connected, did it ever work, and from what OS X to what was the "OS X install" in your title?

  • Sudden monitor seems not working after change HD

    Hi Folks,
    after I change my original HD which is made by Hitachi to Seagate Momentus XT, my sudden monitor seems not working again, in perviusly if I take my MBP up from table with a strong accelerate, a sound like "ka-da" would be heard from HD because of the arm in HD reset to its initial position, but now with the new HD, this issue has never happened again.
    anybody know why? please do me a favor, thank you.

    http://www.seagate.com/ww/v/index.jsp?name=st95005620as-momentus-xt-sata-3gbs-4g b-500gb-drv&vgnextoid=8ba8576b12b38210VgnVCM1000001a48090aRCRD&locale=en-US
    1-800-SEAGATE (1-800-732-4283)

  • Disable port monitoring task not working

    Hi,
    On SCOM 2012 SP1 the task "disable port monitoring" is not working. When I run it shows a success message but the port\interface keeps to be monitored on scom, the ports that I'm trying to disable the monitoring are members of the Relay Network
    Adapters Group. Is there any way to fix this task or manually stop the monitoring of the port\interface ?

    Hi Carlos,
    By coincidence I ran into the same problem today.
    It can be disabled by creating an override where you target the specific port object and set the parameter enabled=false.
    I am not 100% sure this is the correct way but it works. I am assuming the disable port does something similar but I have to open up the task to confirm this.
    For now I hope this helps.
    Regards Marthijn van Rheenen
    Blog: Heading To The Clouds

  • My new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    my new macbook air and new thunderbolt monitor will not work together. the keyboard will not engage and the monitor screen keeps going black. is it a problem with the monitor, connection, laptop?

    A new Mac comes with 90 days of free tech support from AppleCare.
    AppleCare: 1-800-275-2273
    Call AppleCare. They will help you.
    Best.

  • PI 1.3 Interface Monitor is not working

    Dear all,
    Today, I found one more very basic monitoring of Cisco PI 1.3 is not working.
    I enabled interface health monitoring on Cisco PI 1.3 for some critical ports.
    However, even I shutdown these ports the PI still show them as UP.
    I am really disappointed with PI.
    Best Regards

    1. Yeah I Have checked Changes done on the RPd.
    2. I have run a sample report on the answers and also a dashboard created
    3. The sample report run has not Dynamic variables or any other system variables.
    Thanks for the reply.

  • HP 2311C USB Monitor will not work with Windows 8.1

    Just done a clean install of Windows 8.1 on my HP Spectre XT Pro.
    The HP2311C monitor is working fine as a USB hub and the built-in Network card but will not detect the monitor as a USB monitor.
    This was working when it was a Windows 8 build and previous Windows 7 build.
    I have downloaded and installed all the HP drivers and run the HP Support Assistant to make sure everything is up to date.
    My two other collegues who have done the same upgrade with the same kit and are also having the problem.
    If we plug the HP2311C into a Windows 8 or Windows 7 machine the USB monitor works fine.
    Tried several reboots, connections and uninstalls, which have not worked. Also there are no event logs to suggest an anwser.

    I am having the same problem with my SPECTRE PRO 13 and Windows 8.1 - most unhappy about it. There is no 8.1 driver for the L2311c and I get no help out of HP as to when there might be one . These items are not cheap in NZ and I feel I have wasted my $$. It works fine on XP!

Maybe you are looking for