Deafult client value while logging into SAP

Hi,
A general question --
How can i change the default client value say '111' to '100' in SAP initial screen while logging in.
Regards,
pankaj

HI,
Check this Link Changing SAP login client default to "200" from "000"
Thanks
Mahesh

Similar Messages

UPC fonts in crystal runtime reset after fresh logging into SAP B1 desktop client?

Dear Experts,
I have a client who has SAP version: Business One 8.82 (8.82.069) PL: 06 Hotfix2 and Crystal Reports version: 12.1.0.892 Product Type: Full.
They have a shipping report that is printed from production module. They needed UPC barcodes on the report. The achieved that through IDAutomation Fonts. The crystal report uses the IDAutomation Function that takes the field and converts and the font is IDAutomation Font that shows the fields are barcodes.
This repeated works when logged into SAP server using specific id.
IDAutionation is installed on SAP Server.
Here is the problem?
The shipping users have a desktop which has SAP B1 client. That desktop also has IDAutomation fonts installed.
Shipping personnel logs into SAP B1 with the same id that worked on SAP Server, the report prints okay just the first time after it was saved in SAP Server through crystal report edit and save. Next time they log out of SAP client and log back in with same shipper ID, the report does not pick up the UPC IDAutionation fonts. It comes out as some stange text.
The fonts are present in control panel fonts on both server and desktop.
I called IDAutiomation support, they could not help besides saying, put the fonts on both server and client, which I have already done. He also said, there were crystal report runtime issues with fonts?
Could someone help me out here. What am I missing? I even tried installing full crystal report on the desktop and it did not get resolved. Customer is quite desperate to get this resolved.
Thank you,
Syed

After removing every xf86-video-* package except xf86-video-nouveau, xf86-video-vesa and xf86-video-nv plus installing nouveau-dri and rebooting, it works. Thanks karol!

Error while logging into server

Hi all,
 We are getting the following error while logging into portal server.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/htmlb/AbstractCompositeComponent.
Exception id: 05:24_21/03/06_0306_7632250
See the details for the exception ID in the log file
 The log file says:
The error occurred while trying to load "com.sapportals.wcm.app.controller.ControllerComposite".
 at com.sap.engine.frame.core.load.ReferencedLoader.loadClass(ReferencedLoader.java:389)
 at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
 at com.sapportals.wcm.portal.component.base.ControllerComponent.getPage(ControllerComponent.java:90)
 at com.sapportals.portal.htmlb.page.PageProcessorComponent.getPage(PageProcessorComponent.java:193)
 at com.sapportals.wcm.portal.component.base.ControllerComponent.getPage(ControllerComponent.java:101)
 at com.sapportals.portal.htmlb.page.PageProcessorComponent.doOnNodeReady(PageProcessorComponent.java:62)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
 at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
 at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
 at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
 at com.sapportals.portal.pb.PageBuilder.createAndAddEmbeddediView(PageBuilder.java:178)
 at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391)
 at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.java:234)
 at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:576)
 at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
 at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:725)
 at com.sapportals.portal.prt.component.CachablePortalComponent.handleEvent(CachablePortalComponent.java:685)
 at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
 at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:369)
 at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
 at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
 ... 21 more
#1.5#00096BDA49250056000000230000194C00040F7F0C37AE90#1142938246828#com.sap.portal.portal#sap.com/irj#com.sap.portal.portal#Administrator#36976##PCIIB03901.cts.com_J2E_7632250#Administrator#85981ec0b8c811daa57e00096bda4925#SAPEngine_Application_Thread[impl:3]_22##0#0#Error#1#/System/Server#Java###Exception ID:04:20_21/03/06_0302_7632250
[EXCEPTION]
#1#com.sapportals.portal.prt.runtime.PortalRuntimeException: PortalRuntimeException
 at com.sapportals.portal.prt.core.PortalRequestManager.handleRequestException(PortalRequestManager.java:921)
 at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:803)
 at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
 at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:390)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:264)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:347)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:325)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:887)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:241)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
 at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:95)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:160)
Caused by: java.lang.NoClassDefFoundError: com/sapportals/htmlb/AbstractCompositeComponent
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@13cf82b]
Parent loader name: [com.sapportals.portal.prt.util.AutoClassLoader@1052dc3]
References:
 not registered!
Resources:
 D:
usr
sap
J2E
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.km.cm.main
lib
km.appl.controller.controller_api.jar
 D:
usr
sap
J2E
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.km.cm.main
lib
km.appl.docapplet.docapplet_api.jar
 D:
usr
sap
J2E
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.km.cm.main
lib
km.appl.servlet.base_api.jar
 D:
usr
sap
J2E
JC00
j2ee
cluster
server0
apps
sap.com
irj
servlet_jsp
irj
root
WEB-INF
portal
portalapps
com.sap.km.cm.main
lib
km.appl.servlet.webdav_api.jar
The error occurred while trying to load "com.sapportals.wdf.WdfCompositeController".
Loader Info -
ClassLoader name: [com.sapportals.portal.prt.util.ApplicationClassLoader@13cf82b]
Parent loader name: [com.sapportals.portal.prt.util.AutoClassLoader@1052dc3]
References:
 not registered!
I checked the following thread:
/thread/25951 [original link is broken]
The htmlb jar file is available in the location where it has to be.
We have been getting this error 2 or 3 times; each time we had to install the server again!!Couldn't find any other alternative.
Can someone help me in resolving this issue?
Thanks in advance.
Any help towards solving the problem will be definitely rewarded.
Regards,
M.Subathra

Hi James,
 Am not able to get u.
The jar file is already there in the path.
Now,should I rename com.sap.portal.htmlb.par.bak to com.sap.portal.htmlb.par? Please clarify.
Thanks & Regards,
M.Subathra

Error while logging into BI Publisher

Hello All,
I get the below error while logging into BI Publisher with the Default credentials
"oracle.apps.xdo.servlet.resourc eNotFoundException: %s_Reports_Path%/Admin/Security/principals.xml "
Any inputs on this is highly appreciated.
Thanks,
Vasavi

Hi ,
Check the following thread
BI Publisher login fails
May be the same issue is sloved...
Thanks,
Ananth

Safari Version 6.0.2 (7536.26.17) Yahoo security - Using Yahoo search engine: while logged into Yahoo my entire screen gets taken over by a full page popup add/i've cleared histories

Safari Version 6.0.2 (7536.26.17)
I believe my problems stem from the public side of Yahoo where I go to open my Yahoo Email account, and/or from the file I get in
email.
Yahoo security - Using Yahoo search engine: while logged into Yahoo my entire screen gets taken over by a full page popup add/i've cleared histories & cookies & flash cookies but the problem returns, sometimes right away, sometime on the next log on … what to do … . I’ve heard of this problem being called a form of ‘yahoo mail hijacking’.
Yahoo is better than Google right now. While using Google as a search engine and logged into Yahoo-mail the page elevator (up& down) bar actually freezes, a dead giveaway that something is up. So far nothing I do will stop the page elevator from freezing when I'm using the Google search engine. I either have to use the Yahoo or Bing search engines.
MacPro w/OS X ver 10.7.5 & Norton Internet Security 5 for Mac ver 12.4 (73) / I update Norton security at least 3-times a day. I thing I get the bug when I log onto my Yahoo Email and go through my emails. When problems get constant I Reset Safari then run flush to burn flash cookies. What else can I do?
Yahoo wanted $58-bucks for a consult, that’s ********. You would think Yahoo would want to be advised of ongoing Yahoo Searchengine / Yahoo Email problems, and want to help there users with ongoing problems. Sure they will help me with their problem for $58, and probably even suggest even less than what I am already doing on my own.

It's hard to tell from your description what is going on, but try this first.
Quit Safari. If it won't quit in the usual way, select
 ▹ Force Quit...
from the menu bar, then select Safari from the list and press return.
Relaunch Safari by holding down the shift key and clicking its icon in the Dock. That will stop the bad page from reloading automatically. From the menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove all website data
to get rid of any cookies or other data left by the server. Open your Downloads folder and delete anything you don't recognize.
Also get rid of the useless Norton crapware, after backing up all data.
Uninstalling your Norton product for Mac

Error while logging into applications in R12(21.1.3)

Hi,
We are getting below error while logging into applications in R12 (12.1.3).
**"You have encountered an unexpected error. Please contact the system administrator for assistance"**
Everytime we face this issue, we will bounce OACORE services then the issue will not occur again.
Can you please help me in finding permanent fix for this issue?
FYI,
I have performed the following debugging steps to check the issue further
1.     Enabled FND diagnostics at the site level .
2.     Added following lines in ocj4.properties file
AFLOG_ENABLED=true
AFLOG_LEVEL=statement
AFLOG_MODULE=% (% captures all - preferable to use products such as fnd, ies, por)
AFLOG_FILENAME=/tmp/test.log
3.     Examined the output from aoltest.jsp. Please find the attached AOL-J diagnostics test file.
Then I have reproduced the issue, and examined all the log files but couldn’t find any error information.
Thanks,
Srinivasulu.

Everytime we face this issue, we will bounce OACORE services then the issue will not occur again.
Can you please help me in finding permanent fix for this issue?
Then I have reproduced the issue, and examined all the log files but couldn’t find any error information. If bouncing the services fixes the issue, then there must be some details about the error in the logs.
R12, 12.1 - How To Enable and Collect Debug for HTTP, OC4J and OPMN [ID 422419.1]
How to enable Apache, OC4J and OPMN logging in Oracle Applications R12 [ID 419839.1]
Thanks,
Hussein

Is there a Report detailing who has logged into SAP ECC 6.0 over 24hours

I am looking for a report that would detail who has logged into SAP over a 24hour period?
Even logs would be good. This is very important as we are trying to trace the events leading up to a problem
Regards,
Maria

You need to activate Auditing for this purpose. This will, however, not track the transaction called in the past.
I wonder what you want to do with that information because you won't be able to tell, what the user has actually done.
If I start VA01, enter "TA" and press enter - I have started that transaction but I haven't done anything. Do you count that in your wanted-statistic as "has done VA01" or "has not done VA01"?
You can use STAD to see what is exactly happening on your system but not for 24h because the amount of data would be so big, your system would literally explode (depending on the number of users and activity on your system of course).
Markus

If I buy an in app purchase with iTunes account "B" on my ipad, while logged into a different gamecenter, will it show up on Apple ID "A" email?

If I buy an in app purchase with iTunes account "B" on my ipad, while logged into a different gamecenter, will it show up on Apple ID "A" email? I am trying to buy an in app purchase for Clash Of The Clans. My gamecenter is associated with Apple Account "A", but if I purchase the in app purchase under Apple Account "B", will it show up in Apple Account "A" email, due to it being associated via gamecenter? Please reply!

No. An in-app purchase can only be made through the same iTunes Store account that the game was originally purchased through and will be linked only to that account. Receipts will be mailed only to the email address associated with that Apple ID. What Game Center account the game is linked to will be, to the best of my knowledge, irrelevant.
Regards.

After log into SAP Portal, Terms&Conditions Window should open

Hi Team,
As per one of the requirement in my project, i have to develop below applicaiton.
Requirement: Once user logged into portal & trying to access his role first time in a year, Terms & condtions window should open, once user accepted the terms& condtions, user can access his role. if user entered into portal second time in a year, direclty can access his roles.
For this: i have created webdynpro-java application with empty view & portal abstract portal component with terms & conditions text, then i have created portal Iviews for both webdynpro-java application and abstract portal comonent, then i am calling abstract portal component Iview into webdynpro-java component controller wdDoinit() method via WDPortalNavigation.navigateAbsolute() method.
Finally, i have assingned webdypro-java ivew to Test Role: once click on role it is calling Terms&Conditions pop window.
Questions:
1. how can i use same Iview in user actual role, i mean, once user click on his role first time terms & codition window should open? after accepting terms & condtions only his role can access...
2. how can i navigate from terms & condtions to his role?
3. if user didn't accept terms&conditions, he can't access his roles, how can i handle this?
4. how can i check, if it is user first login into portal or not in a year ? where i have to store this user data? what are the parameters i have to use?
can you please help me on this?
Thanks
Sandeep.

sandeep kumar wrote:
> 1. how can i use same Iview in user actual role, i mean, once user click on his role first time terms & codition window should open? after accepting terms & condtions only his role can access...
> 2. how can i navigate from terms & condtions to his role?
> 3. if user didn't accept terms&conditions, he can't access his roles, how can i handle this?
> 4. how can i check, if it is user first login into portal or not in a year ? where i have to store this user data? what are the parameters i have to use?
I would redefine com.sap.portal.navigation.portallauncher.default component for your purpose
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/44/42c08f81ce2152e10000000a114a6b/content.htm
so WDJ is not really an option here.
To store whether display T&C screen you can use custom attribute on user profile
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/44/0316d50bbe025ce10000000a1553f7/content.htm
public class MyPortalLauncher extends PortalLauncher
    public void doContent(IPortalComponentRequest request, IPortalComponentResponse response)
          INodeList nodeList = request.getNode().getChildNodes();
          if(nodeList != null && nodeList.item(0) != null)
//Check value in user profile whether he accepted T&C this year
//if no - navigate to T&C page
               IResource jspResource = request.getResource("jsp", "jsp/termsAndConditions.jsp");
               response.include(request, jspResource);
//else - process as usuall
               response.include(request, nodeList.item(0));
          else
               IResource jspResource = request.getResource("jsp", "jsp/noRoles.jsp");
               response.include(request, jspResource);
//implement
public void onAcceptClick() throws PageException
//set user attribute value if accepted, logoff is rejected

Couldn't log into SAP System (message 00264) after SAP_BASIS update

Hello,
we performed SAP_BASIS update to SAPKB70023 and get a problem with logon into a SAP system with message 00264 (Status &2 of the user interface &1 missing).
We have a 64-bit non-Unicode system on Solaris/SPARC/Oracle and Kernel level 333.
We tried to import MENUSYST program from note 1285869, but nothing happened at all. The parameter abap/unicode_check we set to "on" but this didn't help us.
So after selecting system record in SAP Logon now we get the initial logon screen with no "new password" button and error 00264 (Status 0020 of the user interface SAPMSYST missing.) and couldn't log into the system.
We have no idea why correct and existing statuses are not working.
Please suggest us what to do to fix this problem.
Thanks in advance!

Check this,
http://forums.sdn.sap.com/thread.jspa?threadID=835278
it may be useful.
Regards,
Ravi

Txn LM50 starts with a message when logging into SAP

Hello Developers,
I have a user who always gets txn LM50 to immediately display after every login to SAP instead of getting the SESSION_MANAGER page to display.
After entering the user id and password, transaction screen LM50 displays with message "User xxxx not assigned to any active inventory document". I don't believe this is necessarily a problem with the tcode or as a result of the error causing the message.
Are there any known reasons why a user would be placed directly into a transaction rather than into the initial SESSION_MANAGER page as a result of logging into the system?
Thank you
Terry

I'm not sure if you are looking at the right place.
Ok. Do this. Go to easy access menu and set that as the start transaction.(Browse the menu bar to find the "set start transaction" option)
- guru
Reward points for helpful answers

While logged into Firefox my alpha key stroke shows as a number instead of a letter; Any suggestions?

When I try to enter a website address into the search bar my letters are appearing as numbers….in other words I cannot type letters only numbers! Please help! This has never happened to me before. This same thing happens when I use Internet Explorer. It only does this when I am logged into the internet. In order to enter this text I had to cut and paste from a word document.

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in [[Safe mode]]:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Changing CPU shares while logged into zone

Hi, I am new to Solaris and I'm trying to create a script that will change the amount of CPU shares in the local zone while being logged into it. I am getting this error message:
bash-3.2# prctl -n zone.cpu-cap -v 20 -r -i zone myzone
24971: /usr/lib/utmpd
prctl: failed to delete resource control zone.cpu-cap for pid 24971: Permission denied
Is this because I cannot change the CPU shares while being in the zone? Is there anyway to get around this?

implicate_order wrote:
Ever tried to remove a CPU or shrink RAM off a running server?
:)It isn't that difficult on the right hardware. It takes time to drain off the utilized resources; but I've done this quite a few times on the big iron machines.

I am using Firefox 4.01 on a Mac, I have entered usernames while logging into Yahoo and sometimes, because networks are slow, I have put the password in too - How can I get rid of usernames offered at the login stage?

When I go to log into Yahoo now it offers me a list of possible log on ids. Because of mistakes in typing some of them have the passwords on them too. How can I remove this list?

That worked and was really convenient - and I wouldn't have guessed it in a year. (Well I didn't guess it all last year anyway!)
Thanks

GETTING ERROR MESSAGE"You cannot login because the phone is JAL-enabled' while logging into CAD

Hello All,
One of my customer is facing problem while loging into CAD. They were getting an error message"
You cannot login because the phone is JAL-enabled.
JAL-enabled phones are not compatible with CAD".
I gone through some cisco document saying that Join across line/Direct transfer across policy option status should be set to OFF. But i dont find option in 9971 series phone.
Any Reply for this query. Highly Appreciated.

That's because the JAL function is inherent to the 8961/9951/9971 phone and cannot be disabled. You'll need to upgrade to a release that supports this phone model or use a different phone.
Please remember to rate helpful responses and identify helpful or correct answers.

Deafult client value while logging into SAP

Similar Messages

Maybe you are looking for