Dear sir Thank you very much. I am not a computer davy. still I ail try to explain. I am in Chennai India. My service provider is BSNL. I have a broadband connection wit 4 mb speed - though I get only 3 to 3.3 mb. The TC is connected to the modem *** rou
Dear sir
Thank you very much. I am not a computer davy. still I ail try to explain. I am in Chennai India. My service provider is BSNL. I have a broadband connection wit 4 mb speed - though I get only 3 to 3.3 mb. The TC is connected to the modem *** router through ethernet in wired LAN1 socket. My iMac is connected to the modem in LAN2 socket through either net. Though the TC is permanently connected to the modem-router, it gets connected to the internet only if it is shown in the dock. If it is exited from the doc, it loses internet connection. I tried factory reset. Still the same problem. Therefore, unless the iMac is open and the Tc is shown in the dock, TC is not connected to the internet. Therefore all the time iMac need to be open and running. I hope, eih little knowledge I have explained. Thank you
S KANNAN
IRS(RETD)
The TC is perhaps in the wrong mode..
If you have a modem router the TC should be connected by ethernet and the computer plugged into the TC not the modem.
TC will be in bridge mode.. but it can lose connection on a daily basis.. if you have that issue downgrade the firmware as later firmware is not reliable.
I recommend 7.6.1 but the earlier ones are better on 7.5.2 .. anything more than 18mths old should go back to 7.5 firmware.
Similar Messages
-
How can I connect my Mac Book Pro (year 2008) to the TV set through HDMI? I've seen a DVI to HDMI iwire but I'm no sure that it is correct. Could anyone help me? Thank you very much.
I do not know the iWire adapter, but I use an inexpensive ($3) DVI to HDMI adapter from Monoprice, along with a regular HDMI cable:
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10419&cs_id=1041902 &p_id=2029&seq=1&format=2
Be aware that this will only transfer video. You Macbook Pro cannot combine audio through DVI to HDMI. You will need to listen to the audio through the Mac speakers, or attach speakers or a sound system to the Mac earphone jack, or determine if your TV has the ability to accept external sound from the Mac while showing video through HDMI (few can). -
Dear Sirs,
I have used an Iphone 5 for some months ago. But I cannot find the way to hang up automatically. So I suggest to the Apple that in IOS7, you should ad that function. For example, after talking 8 or 10 ... Minutes, the phone can hang up automatically. Because, there are many services provider promost 10 minutes free.
Thank you very much.
Tuan ThinhWe are not Apple, we are users just like you. To communicate with Apple go to http://www.apple.com/feedback/iphone.html
-
I have an iPhone 4s just eight months, it is normal that the battery lasts only 3 hours? please help me thank you very much.
Three hours if definitely NOT normal. I get at least 48 hours out my 2 year old iPhone 4S' battery with light usage. Did you do the iOS 7 update on the phone it self (OTA) or through iTunes? In my experience most problems are caused by the OTA updates. For this reason I ALWAYS update using iTunes on my computer.
I would suggest restoring your phone using iTunes on your computer and setting it us as a new phone. This downloads a fresh copy of iOS 7.1 from Apple and installs it on your phone. Just make sure that you transfer all purchased items (apps, music, etc.) as well as photos to your computer before restoring as the restore will completely wipe your phone. Do not restore from a back-up. Yes, you will loose all your data on the phone but restoring a back-up can restore the problem you are currently having back to your phone. Once your phone has been restored you can manually sync back your apps and music.
Before restoring you can also check to see that battery-killers like Location Services, Background App Refresh, etc are only turned on for the apps that really need it. I recently read and article that said that the Facebook app can be a real battery killer. If you have this app installed turn of location services and background app refresh for this app and see if that helps. Also go to Settings / General / Restrictions / Location Services / System Services and turn off all the options in that menu. Your phone does not need any of those to function. Constantly using your phone's GPS is a huge battery killer. I only have Location Services enabled for Find my iPhone and Background App Refresh is turned off completely.
I hope this helps. -
I have Iphone 4s, and the phone will activate itself again. This I have verified, but when I shall put this onto my phone, so the phone will not approve the newusername and password. How do I get changed Apple ID on my phone so that I get using the new username and password that is verified? Silly to buy a new phone just for this .... The phone is almost three years old. How long can weexpect this to last? I would like an answer as soon as possible ... Thank you very much.
It sounds like your device might be in Activation Lock. Is it asking your to enter in an Apple ID & password, but only showing you the first letter of the email address and then some dots? Example: j•••••@icloud.com?
If so, do you recognize that email? Do you have an Apple ID that fits the same format? If so, then go to www.cloud.com, log in with that Apple ID & password, and see if under Find My iPhone it shows this device. If so, turn off the device, then remove the device from the list. -
Hello, my sister her macbook pro cannot connect to our wireless internet. My imac however can, so the problem has to do with her laptop. We were wondering how we could solve this problem? Thank you very much in advance!
We did that, but it just doesn't seem to be able to connect. So basically we tried to connect to our network and insert the password, but afterwards it does nothing. Weird thing is also that the network symbol (top right of the screen) says that it has been connected, but when I go look at the system preferences --> network, it states that it has not been connected
-
Hi.I need help.my iphone was Stolen .how can I get back my iphone. Serial No.DX******PMW.could you help me find my iphone.thank you very much.could you send me the ICCID number to help me find the iphone.if you can help me.
<Personal Information Edited by Host>
Sincerely a Chinese girl really need your helpSorry we are all users on this User Community No Apple Staff
Read this .
http://support.apple.com/kb/HT2526
Apple do not and cannot assist in finding stolen property ,that is the responsility of your Police -
Dear Apple, unfortunately, I think I have found a bug in ios 7. During an incoming call is no call rejection or selection of the ability to send a text message. I hope it is a bug and there is a solution. Thank you very much.
Please report via Apple Feedback. These are user forums. You aren't speaking to Apple here.
-
I want to know where I can get additional iDvd Menu templates for weddings. I do wedding dvd's would like to buy additional templates to use in iDvd. Thank you very much.
Magda
SOUTH AFRICAHi...
Better to post in the iDVD forum here.
That way you can get feedback from iDVD users. This forum is for troubleshooting Mac App Store issues. -
Hello and good day,
can someone share me here in the Forum may, if they found a Adobe can put together package? Basically, I need only Photoshop and Adobe Premiere Pro! About a response I'd like Very much. Thank you very much and greetings
Ralf
PS. According to Adobe, this should determine a Adobe ID be possible!You may buy two individual subscriptions
Cloud Plans https://creative.adobe.com/plans
-and subscription terms http://www.adobe.com/misc/subscription_terms.html -
i'm downloading my apps from my desktop, but when i'm downloading apps from my laptop, the apps can't be transfered. what setting could i adjust so that i could transfer my apps from my laptop to my ipod touch4. Thank you very much-ariston
You can only sync to one iTunes Library/one computerbut you can manage music among different computers. See:
Using iPhone, iPad, or iPod with multiple computers
The only way to sync app from the desktop computer is to make that the syncing computer. You can't sync app from more than one iTunes Library/one computer.
To make the desktop computer the syncing computer you have to:
- get all apps and other item on the desktop computer
- Authorize the computer for the iTunes accounts inquestion
- Connect the iPod to the desktop computer and make a backup by right clicking on the iPod under Devices in iTunes and selecting Backup
- Restore the iPod from that backup -
After the latest updat to Mavericks 10.9.3, my imac continues to loop back to the login screen...Suggestions??? THANK YOU VERY MUCH!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports 'com.autodesk.AutoCad com.evenflow.dropbox com.google.GoogleDrive' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[45]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n\t(%s)\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}')printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ s/ *:$//;x;s/\n//;/Apple|Capacity:|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;};/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;} ' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/:/;END { if(NR<100)print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}')print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR==2'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' ' s/^.{52}//;s/ .+//p ' ' /Launch[AD].+\.plist$/;END{if(NR<100)print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/;END{if(NR<100)print "/System/"};' '/^\/usr\/lib\/.+dylib$/p' '/\/etc\/(auto_m|hosts[^.]|peri)/s/^\.\/[^/]+//p' ' /\/(Contents\/.+\/Contents|Frameworks)\//d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| ","||kMDItem'${p[35]}'=");sub("^.."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' /lR/ { if($2<='${p[25]}')print $2;} ' ' BEGIN { FS=":";} $3~/(sh|ng|ic)$/ { n=split($3,a,".");sub(/_2[01].+/,"",$3);b=b"\n"$2" "$3" "a[n]" "$1;c=c$1;} END { d="sort|tail -n'${p[38]}'";print b|d;close(d);if(c)print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(A.+ E.+ text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' /:/{$0="'"${p[28]}"'"};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status "-F '\$Time \$Message' -k Sender kernel -k Message Req 'Beac|caug|dead[^bl]|FAIL|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL'" '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/*/*.{BS,Bas,Es,OSXU,Rem}*.bom' '{/,}L*/Lo*/Diag* -type f \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;' '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto_master,{cron,fs}tab,hosts,{launchd,sysctl}.conf} /usr/local/etc/periodic/*/* .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP RSSI Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear;};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ test "$v"&&echo "$_";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;A0;{ A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D22 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D23 24 24 32 31;D13 25 37 32 33;A1 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;D22 32 31 43 38;D23 20 42 32 41;D23 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with "Model Identifier." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
ORA-00313 problem, thank you very much!!
Hi, there,
when I use OEM standalone to login the database, I found there is an error:
ORA-00313:open failed for members of log group1 of thred 1
ORA-00312:online log 1 thread 1 "c:\oracle-database-server\oradata\redo01.log"
then I can't open the database and only can mount it.
and then I found all the other databases on my local machine have the exact same problem. at the same time, I found the service of OracleOracle9iDB_serveManagementServer can't startup. whenever I want to start it, it warn me "start and stop, becuase there is no work connect to it". so I doublt it seems there is something wrong with my operation system, but not the database's problem. my os is WIN XP PRO.
does there anyone who knows the reason and how can I solve it? besides, can I backup the database in mount status and how?
thank you very much for any hint!
I do need you help, thank you so much!!Does c:\oracle-database-server\oradata\redo01.log exist? Once I met a guy, who, as he said, deleted unnecessary log files :-)
-
ORA-00312 problem, thank you very much!
Hi, there,
when I use OEM standalone to login the database, I found there is an error:
ORA-00313:open failed for members of log group1 of thred 1
ORA-00312:online log 1 thread 1 "c:\oracle-database-server\oradata\redo01.log"
then I can't open the database and only can mount it.
and then I found all the other databases on my local machine have the exact same problem. at the same time, I found the service of OracleOracle9iDB_serveManagementServer can't startup. whenever I want to start it, it warn me "start and stop, becuase there is no work connect to it". so I doublt it seems there is something wrong with my operation system, but not the database's problem. my os is WIN XP PRO.
does there anyone who knows the reason and how can I solve it? besides, can I backup the database in mount status and how?
thank you very much for any hint!
I do need you help, thank you so much!!Please repost this in one of the database forums, unfortunately most of us on the JDev team are better at Java than database issues.
Here's the URL to the general RDBMS forum here on OTN:
General Database Discussions
Hope this helps,
Rob -
When I have 10+ applications open in Windows 7, I can click and grab the toolbar edge and drag upward, causing a "second" row of viewable and operating applications.
I was just wondering if the same could be done with Firefox. It's not a tragic issue. Sometimes I get many, many tabs going and (trust me Firefox is my favorite) would like to see all tabs at the same time, even if it causes 2 rows of tabs and cuts down on my viewable screen area.
Thank you very much !Here is one add-on that lets you add more rows of tabs in Firefox:
https://addons.mozilla.org/en-US/firefox/addon/toomanytabs-saves-your-memory/
Maybe you are looking for
-
When I create a .pdf from an Office file, I have to close the original file before using. Help?
When I create a .pdf file from an Office 2010 file (.docx or .xlsx), I cannot move, rename or alter the .pdf file until I first close the original Office file. If I try, I get a message that the file is in use. Is this due to some sort of cache set
-
Alum 24" 2.8GHz Experiencing very choppy video playback
Hello lately when I try to watch any type of video it pauses constantly using Firefox web browser.I am clueless why this is happening seeing I just installed a 4GB memory kit from Kingston thinking maybe it was a memory issue but I am still having th
-
How do I show multi-voltages in Multisim?
I am trying to place +12v, -12v and +5v voltages in my schematic to power IC's. What symbol do I use? VCC is no good, cannot use more than one voltage applied to it. Change one, all change. Test_pt is no good, same reason. Is there a universal symbol
-
HT4623 I cannot update to iOS 8, please help!
I cannot update to iOS 8 because i get the not enough storage error, even though i have 4.6GB free, according to usage. What can i do? Except using itunes because i'm on holiday and i do not have acces to a computer.
-
All my apple devices have suddenly stopped allowing me to access my email account. I keep getting a message saying "cannot get mail, the connection to the sever failed". What has happened and how do I fix it?