Debugging a SAP program

Hi Guys,
Is there any way I can create a watch point for an internal table (eg. T_OUTTAB). I am debugging SAP program and want to stop when a particular T_OUTTAB is populated. Debugger should stop when the internal table is changed or even better if particular field in the internal table is changed.
When I tried to put the internal table in create watchpoint, I get following message.
Variable T_OUTTAB does not exist.
Please help.
mini

You can put a watch point on an internal table, but only after you enter that particular program where the table exists. Try to locate the include/program where the table exists, put a breakpoint on the include and then after entering the program/include put a watchpoint on the itab.

Similar Messages

Regarding debugging in sap script and smart form

hi guys,
can any one tell me what are the different steps and options available to debug a SAP SCRIPT and a SMARTFORM.
thank you very much
pavan

Scripts:
1. In the form, Utilities->debugger / RSTXDBUG FM for debugging script
2. Generally SAP script contains the Layout and corresponding print program.
First go to SE71 and enter ur script name. In the same screen go to Utilities->click on activate debugger option.
Now go to SE 38 and enter ur Print Program name and execute the program.
Now you can debug the script Page wise and window wise.
Smartforms:
In the Smartform, create a Code Node and within the Code Node you can hardcode a normal abap Break Point.
Insert a "Program Line" just above the node you want to debug and this program line write a normal abap breakpoint. So whenever you call the smartforms, it will stop at this breakpoint and you can debug onwards.
Other way to debug smartform is to debug the Function Module of that smartforms.
You can also use smartform trace (transaction SFTRACE).
Have a look at below link.
http://help.sap.com/saphelp_erp2004/helpdata/en/49/c3d8a4a05b11d5b6ef006094192fe3/frameset.htm
I hope it helps.
Best Regards,
Vibha
*Please mark all the helpful answers

Debugging of SAP SCRIPTS

Hi ,
Wht r the steps for debugging of sap-scripts, and the wht r the steps (configuration steps ) i need to follow for making changes to an existing script.script is trigred by TC : VA03.
Many thxs
vind.

Hai Vind
SAP Script:
YOu Can debug a SAP Script by activating debugger in two ways 1.In SE71->Menu->Utilities->Activate Debugger, then debugger will be get activated and when your print program is executing Script Debugger will be in active and you can proceed with your debugging.
2. Goto se38-> RSTXDBUG ->Execute this same as going thru in se71-> Menu, now debugger will be activated.
Smartform:I am afraid , we dont have any direct commands or direct procedure to debug a script. But in indirect ways we can do it.
1.Put a command line before where you want check the value of smartform and write the code "BREAK-POINT"->hardcoded debugging.
2.You can debug the function module which generates the smartform.
Thansk & regards
Sreeni

How to debug module pool program

Hi everybody,
How to debug module pool program ,please send any material for module pool programming .
Thanks & Regards,
Siddivinesh.Jogu
[email protected]

Hi
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
Debugging
Refer to this thread
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
Debugging
Check these documents.
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_nw04/helpdata/en/5a/4ed93f130f9215e10000000a155106/frameset.htm
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.cba.nau.edu/haney-j/CIS497/Assignments/Debugging.doc
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/84/1f624f4505144199e3d570cf7a9225/frameset.htm
http://help.sap.com/saphelp_bw30b/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://help.sap.com/saphelp_erp2005/helpdata/en/b3/d322540c3beb4ba53795784eebb680/frameset.htm
ABAP Debugging
http://www.saplinks.net/index.php?option=com_content&task=view&id=24&Itemid=34
Look at the SAP help link below
http://help.sap.com/saphelp_nw2004s/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
Regards
Anji

Debugging the webdynpro program

Hi ,
I want to do external debugging in my program,how to set a external break point in the function module in ABAP.If a click the stop button ,it is creating session break point..,but I need to set a external break point.Help me ASAP.

Hi Bharath,
Try this Link:
Link:https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30
Regards,
Prasanna.

How to Debug an ABAP Program

Hi Friends,
I am new to ABAP.
Can anyone of you let me how to debug an ABAP program in detail.
I would like to know whether my logic is working properly and see the field values during debugging.
If any one of you have an How to document which speaks about debugging, pls send it to id, [email protected]
Points will be assigned all to helpfull answers.
Thanks
mv_d

Hi,
go to se38->give ur program name-.execute->give /h at command prompt->execute->now debugging will start->
f5-used for line by line debugging
f6-used for directly executing function modules or performs i.e. control won't go into that block.
f7-run to cursor
f8-direct executing.
fileds: here we can check fild values.
click fileds option and double click on the filed or type the filen name beside filed
tables : here we can check the data in the internal table.
click tables option and double click on the internal table.
Break points:
if you want to debug a particulr part you can use this.
place the cursor at any perform click breakpoint or double click on that line.it will be set.
if /h from report statement it will debug,so for debugging from particular point we will use break points.use f7 to traverse between multiple break points.
Watch-points: In some cases we need to check the data populated in the internal table for eample if we want to check the data of internal table record belongs to 100th vendor we will create watch point for this goto->breakpoints->create watch points->give filed itab-lifnr->=->100.
debugging procedure:
Use '/H' in the command line and execute the report/program, so that it goes to debugging mode
2. keep a hard coded break point in the code like BREAK-POINT and it stops there.
3.From the program Menu, Keep the Soft Break-points and do the debugging.
see the links
Refer to this thread
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/content.htm
http://www.sappro.com/downloads/Settings&SystemAreas.pdf
http://help.sap.com/saphelp_47x200/helpdata/en/c6/617ca9e68c11d2b2ab080009b43351/frameset.htm
https://forums.sdn.sap.com/click.jspa?searchID=2673672&messageID=3187106
https://forums.sdn.sap.com/click.jspa?searchID=2673672&messageID=850453
https://forums.sdn.sap.com/click.jspa?searchID=2673672&messageID=1546485
https://forums.sdn.sap.com/click.jspa?searchID=2673628&messageID=2048883
http://www.saplinks.net/index.php?option=com_content&task=view&id=24&Itemid=34
http://www.sap-img.com/abap/testing-and-debugging-abap-codes-functions.htm
Regards,
Priyanka.

Debuging of SAP script SARTFORMS

Can we debug SAP Scripts & SAMRTFORMS
SHAOIB

Hi,
Yes we can debug scripts n smartforms.

SMARTFORMS DEBUGGING
For smartforms debugging you can do this.
1. Execute the smartform (execute button in SMARTFORMS transaction)
2. Take the generated function module and display it in SE80.
3.Find the smartforms Elements (text elements, windows, code lines, loops) in this and set Soft break points.
Correct name is SMARTFORM_TRACE. You have lots of options for adequate analysis
Tcode - SFTRACE
Re: How to Debug a Smartform
Debug of smartform and sapscript.
Debugging SmartForms
Debugging of a subroutine pool.
SCRIPTS DEBUGGING
There are 2 separate kinds of debugging available when you try to debug scripts.
1. Debugging the print program : This is the normal debugging we do for our report programs.
2. Debugging the script itself : You Can debug a SAP Script by activating debugger in two ways:
a .In SE71->Menu->Utilities->Activate Debugger, then debugger will be get activated and when your print program is executing Script Debugger will be in active and you can proceed with your debugging.
b. Goto se38-> RSTXDBUG ->Execute this same as going thru in se71-> Menu, now debugger will be activated.
refer to the link below
http://www.howforge.com/how-to-debugging-sapscript-form
Look at the BLOG here, it is well explained
/people/sudheer.junnuthula2/blog/2007/01/09/script-debugging
Regards,
Priyanka.

Debugging module pool program

hi guys,
how to debug module pool program.
I have written one user exit in this module pool program, i want to check the value.i don't know the screen number and program name where it is going to effect'?
actually i am validating in this userexit...
anybody knows this....
thanks in advance,
Yad

Hi Yad,
There is a very convenient way of debugging anything in SAP.In the SAP easy access screen choose the icon which denotes the 'Generated a Shortcut on the Desktop'.In the resulting window that appears choose the part where the 'Application' Details are present.Change the TYPE to SYSTEM COMMAND and enter the COMMAND as /H and give some title for e.g 'MYDEBUGGER'.Click on O.K and a shortcut will be placed on your desktop with the title that you have given.Anyplace and anywhere on the SAP screen if you wish to debug just drag the shortcut from ur desktop on to the screen.This is very helpful and would help u to understand the debugging process.
As far as your present scenario is considered put a breakpoint in the user-exit.If your user-exit is getting triggered then the breakpoint will automatically put you into the debugging screen.There is always a way to debug anything.Hope this helps.
Cheers
Nishanth

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

I cannot open my firefox broswer. The message box appeared that said a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available. Under that there are debug and close program buttons.

JackieMars71 I would recommend reviewing your installation log files to determine if there are any errors during the installation process. You can find information on how to locate and interpret your installation log files at Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html. You are welcome to post any specific errors you discover to this discussion.

Fetching of multiple files from Application Server into SAP Program

Hi All,
I have a issue related Fetching of multiple files from Application Server into SAP Program.
Actual issue is as below.
In the selection screen of my program i will give Application Server Path as :
/PW/DATA/SAP/D1S/PP/DOWN/eppi0720*
Then the based on above input it should pick up all the files that are matching eppi0720* criteria.
Suppose if i am having 5 files with above scenario, i have to fetch all those 5 files at a time and place in my SAP Program.
All those 5 file's data should come into SAP at a time.
Can anybody tell me how can we solve above issue.
If any body has come across same issue please provide me with solution.
Thanks in advance.
Thanks & Regards,
Rayeez.

If you want to get around the authorization check, you can do something like this.
report zrich_0001 .
parameters: p_path type epsf-epsdirnam
 default '/usr/sap/TST/SYS/global'.
parameters: p_file type epsf-epsfilnam default 'CO*'.
start-of-selection.
perform get_file_list.
* FORM get_file_list *
form get_file_list.
types: name_of_dir(1024) type c,
 name_of_file(260) type c,
 name_of_path(1285) type c.
data: begin of file_list occurs 100,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file_list.
data: begin of file,
 dirname type name_of_dir, " name of directory. (possibly
 " truncated.)
 name type name_of_file, " name of entry. (possibly
 " truncated.)
 type(10) type c, " type of entry.
 len(8) type p, " length in bytes.
 owner(8) type c, " owner of the entry.
 mtime(6) type p, " last modification date, seconds since 1970
 mode(9) type c, " like "rwx-r-x--x": protection mode.
 useable(1) type c,
 subrc(4) type c,
 errno(3) type c,
 errmsg(40) type c,
 mod_date type d,
 mod_time(8) type c, " hh:mm:ss
 seen(1) type c,
 changed(1) type c,
 end of file.
call 'C_DIR_READ_FINISH' " just to be sure
 id 'ERRNO' field file_list-errno
 id 'ERRMSG' field file_list-errmsg.
call 'C_DIR_READ_START' id 'DIR' field p_path
 id 'FILE' field p_file
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
if sy-subrc <> 0.
 sy-subrc = 4.
 exit.
endif.
* Read the file list and add to internal table.
do.
 clear file.
 call 'C_DIR_READ_NEXT'
 id 'TYPE' field file-type
 id 'NAME' field file-name
 id 'LEN' field file-len
 id 'OWNER' field file-owner
 id 'MTIME' field file-mtime
 id 'MODE' field file-mode
 id 'ERRNO' field file-errno
 id 'ERRMSG' field file-errmsg.
 if sy-subrc = 1.
 exit.
 endif.
 append file to file_list.
enddo.
* Write out the file list
loop at file_list.
 write:/ file_list-name.
endloop.
endform.
Regards,
Rich Heilman

Need to start a program in Oracle System (External) from sap program

Hi guys,
     I need to start a program in another oracle based system from sap program by writing native sql statements.
Does anyone have idea how to do this.
Rgds,
Ram

Hi,
Here is another sample for procedures.Kindly reward points by clicking the star on the left of reply,if it is useful.
Code Sample for writing a procedure with input and output parameters
REPORT zzz_jaytest.
* Getting the regno and total as input parameters
PARAMETERS : p_regno(10) TYPE c DEFAULT 'R1000',
                           p_total     TYPE i.
data : v_total type i.
* In this procedure, we are updating the total of a regno given as input.
* Here two parameters used in the procedure are input parameters.
* We are updating the record of regno entered in selection screen and
* adding the total entered to the already existing total. We have to give semicolon
* for the statement inside procedure.
exec sql.
CREATE or replace PROCEDURE PROC1 ( p_regno in char, p_total in number )
IS
    BEGIN
      UPDATE stu_det SET total = total + p_total where regno = p_regno;
    END;
endexec.
* This is the code to execute the procedure for update.
* While executing the procedure, the parameter variable should be
* preceded with colon :
EXEC SQL.
EXECUTE PROCEDURE PROC1 ( in :p_regno, in :p_total )
ENDEXEC.
* In this procedure, we are selecting the details for the regno entered
* as input. Here p_regno is input parameter and v_total is used as output
* parameter. So that we can use the retrieved value of v_total in our
* ABAP program
exec sql.
CREATE or replace PROCEDURE PROC2 (p_regno in char, v_total out char)
IS
    BEGIN
      select total into v_total from stu_det
                         where regno = p_regno;
    END;
endexec.
* This is the code to execute second procedure.
EXEC SQL.
EXECUTE PROCEDURE PROC2 ( in :p_regno, out :v_total )
ENDEXEC.
write : / 'Total of ', p_regno, ' is ', v_total.

Loading records from .csv file to SAP table via SAP Program

Hi,
I have a .csv file with 132,869 records and I am trying to load it to an SAP table with a customized SAP program.
After executing the program, only 99,999 records are being loaded into the table.
Is there some setting to define how many records can be loaded into a table? Or what else could be the problem?
Pls advice.
Thanks!!!

hi Arun ,
A datasource need a extract structure to fetch data .It is nothing but a temp table to hold data.
First you need to create atable in SE11 with fields coming from CSV file.
Then you need to write a report program to read you CSV file and populate your table in BW .
Then you can create a datasource on top of this table .
After that replicate and load data at PSA and use to upper flow.
Regards,
Jaya Tiwari

How to find out Which SAP programs are affecting Which Z programs?

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

Do we have a program/tool that can tell us the following:
How to find out Which SAP programs are affecting Which Z programs in the entire development server?
We have a list of SAP programs and a list of custom u2018zu2019 programs, which ones impact each other?   I know we have a u201Cwhere usedu201D functionality, however that is at the object by object level.
We need are looking for something a little larger u2013
thanks in advance
Vishnu

Z search field in standard sap program

Hi,
I would like to ask if Z search field can be created in the standard SAP program.
Basically I need modify the search field used when searching for Business area in creation of asset master data (tr. AS01).
It shows the list of table tgsbt. But I would like to exclude by default some rows of the table and also would like to sort it in different way (by text).
Is that possible, if so, could anyone give me a hint how to do that?
Many thanks,
Honza

Hi Jan,
Please go thorugh the below link.
http://wiki.sdn.sap.com/wiki/display/Snippets/ImplementingSearchHelp+Exits

How to uncomment code in Standard SAP Programs

Hi Experts,
how to uncomment entire code of standard SAP programs which is commented .
Standard SAP Program is fully commented,i have to uncomment it ,to work it as normal.
i saw that some lines * / * like this are there in the commented code .
what is the way to un comment this ?
Thanks in advance,
Regards,
Hitu

Well, if it is commented by your company - This doesnt ask for access key but if it is commented by SAP and you want to uncomment, you need access key.
You can ask basis guys to get access key for the object. you need to provide the program name and other information.
Other information: - go to the GOTO on application tool bar and select object direct entry.... you need to provide the full object key.
To uncomment the code - select the lines and right click - uncomment . This can only be done in editable mode.

Debugging a SAP program

Similar Messages

Maybe you are looking for