Debugging in 4.7

In 4.6C, while debugging I could look at internal table using Go To ->Display data object -> Structured editor (where in we could view the internal table just like the ouput tables that are displayed during FM test)..
How does one achieve it in 4.7?

Hi Rich, I am a little slow so plz bear with me..I did find the export button.. I was hoping that functionality was available but hidden from view..
Looks like a case of 'SAP Giveth, SAP Taketh Away'.. That was such a useful functionality... Now this adds so many steps if we want to view the table in full... Further we had option to manipulate the internal table so easily using the structure editor, I can't believe SAP removed it...
Do you know why they did that (was it caused by occasional dumps that we could get with structure editor?)..

Similar Messages

Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input

Dear Friends,
We are facing a serious problem for debugging. Expecting valuable input for the same.
Debugging is not working in R/3 from WebDynpro-ABAP developed webpage input in Production Server.
The debugging (for WebDynpro-ABAP application) is working in Dev. Server for
1st ] Within R/3
Ex. debug for bapi within R/3. i.e. value enter as input in R/3 only.
2nd ] From webpage to R/3
Ex. Some input given on the internet web page developed through WebDynpro and external breakpoint set in R/3 it works. It directs to R/3 code through debugging.
In Prod. Server the 1st case above is working but the 2nd case is not working.
In Prod. Server the WebDynpro developed applications are running successfully through internet explorer webpage inputs. So running the application is not a problem in prod. Server but debugging of the same is the problem.
The setting which are done in Prod. server are,
1] RZ10 in parameters are set for port and host name.
2.1] In SMICM check for ICM.
2.2] Host file updated in Windows-System 32.
3] In SICF following services are active,
3.1] default_host/sap/bc/webdynpro
3.2] default_host/sap/public/bc
3.3] default_host/sap/public/bc/webdynpro/viewdesigner
3.4] default_host/sap/bc/wdvd
3.5] default_host/sap/public/icman
3.6] default_host/sap/bc/gui/sap/its/webgui
3.7] default_host/sap/public/ping
3.8] default_host/sap/bc/error
3.9] default_host/sap/bc/echo
4] In SE80
4.1] Internet services-System-are published
4.2] Internet services-WEBGUI-are published
4.3] Utilities-Setting-ABAP Editor-Debugging-Username & New Debugger set.
4.4] Utilities-Setting-ABAP Editor-Editor-Front-End Editor(New) set.
5] In Su01 for user profiles sap_all & sap_new is assigned and role SAP_BC_WEBSERVICE_DEBUGGER is assigned.
6] The support packages are also updated to latest level.
7] Gone through following links but not getting any clues.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/48/74d50bd1431b5ae10000000a42189c/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/EN/77/3545415ea6f523e10000000a155106/frameset.htm
Thanks in Advance.
Best Regards,
Abhijit.

No cross posting
Read the "Rules of Engagament"
Regards
Juan

Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?

Firefox can't open normally without going through the "this is embarrassing" routine; nor does it close down properly; I get the "end program" message and have to say "end now"it also sticks frequently, i.e. screen freezes for a minute or more; should I uninstall and re-install to try and debug?
- I've used Firefox exclusively for around 2 years.
- My outlook express has no problems
- other programs seem unaffected; it seems peculiar to Firefox.
- my main use is surfing the net, primarily entering competitions on line via specialist competition sites.
- every day at some stage(s) I have to switch computer off as Firefox has got very slow/sticky/freezes.
I'm not techy by any means, but I can only thing of un- and re-installing to hopefully start with a clean slate.

Sounds like something is keeping Firefox from closing properly. See this: <br />
https://support.mozilla.com/en-US/kb/Firefox+hangs#Hang_at_exit

ERROR while debugging a SELECT..ENDSELECT

Hello All,
We get an error while we go into the select..endselect loop during debugging. Because of this if we try to do some research on existing program with Select-endselect..it fails in the second pass of this loop.
This problem was not there earlier, but after we upgraded from 4.6 to 4.7 this problem is bugging us..every day. Does any one have a clue why ?
Thanks!!
Regards,
Vishal

Hi,
debugging a SELECT...ENDSELECT statements brings to a LUW commit work if no other work processes are available for debug.
See OSS notes 675, 2104.
From OSS note 675 **********************************
Cause and prerequisites
Chain of causes:
      1. There is a statement in one of the Select loops, that leads to a database Commit (or Rollback).
      2. A database Commit causes the database to lose the cursor.
      3. The system cannot automatically continue within Select loop after loss of cursor.
Following statements lead to a database Commit:
    * All statements that cause a change of screen (CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT, I/W-Message)
    * BREAK-POINT/ Debugging
      . if no debug process free
      . always after regeneration (in order to release generation lock).
    * WAIT Here a work process is released and a Commit is executed.
    * COMMIT WORK/ROLLBACK WORK
From OSS note 2104 **********************************
Solution
The "COMMITWORK" message appears in the ABAP debugger when programs
orscreensrequireregeneration,or when not enough free capacity
is available inthesystem (or else the debugger blocks a system
process).
Normallyonly one work process is released for debugging. This
isgenerally insufficient ina developmentsystem, as processes
can be blocked for other reasonstoo(background processing,
CPI-C connections,andso on).
The number of work processes made available for debugging can
be configured using the profileparameter
                  rdisp/wpdbug_max_no
Forexample:
                rdisp/wpdbug_max_no = 10
setsthe maximum number of work processes made available for
debuggingto 10. It may be necessary to generally increase the
numberofwork processesatthis time (parameter rdisp/wp_no_dia).
In all other known cases, an error in the application program is
involved.
Regards, Manuel

DID YOU KNOW?: Debugging with BC4J Tester

Did you know that in JDeveloper 3.2, you can run the BC4J tester in debug mode to exercise your business components and hit breakpoints at the same time?
Just do the following:
[list]
[*]Expand the navigator node for your Application Module, revealing its XML and Java implementation files.
[*]Right-mouse on the YourAppModImpl.java file, and select Debug...
[list]
By default, it will debug using the "local mode" connection configuration. If you want it to debug using a difference configuration, just change the configuration name that appears as the 2nd argument in the launchTester call in the main() method of the application module implementation file.

grin Thanks, Steve.
Does this mean that in JDev 5.0 we're going to see an animated Steven Muench head in a tiny window in the lower corner, occassionally tapping on the glass to offer us hints?

Error when starting Weblogic in debug mode

Hi there
Has anyone experienced any difficulties when starting weblogic in debug mode.
More specifically, it cannot start correctly because it thinks that another instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unable to create
a server socket for port: 8320. java.net.BindException: Address already in use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <The WebLogic
Server is no longer listening for connections. You should probably restart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Server shutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdown sequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Server shutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unable to load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)

Thanks for the suggestion.
Unfortunatley the port is definately free/available during startup.
Stephane Kergozien <[email protected]> wrote:
Maark,
Before starting your server, please could you check that the port is
not used by one
other process. You can use the netstat command to do this.
Regards
Stephane
Mark wrote:
Hi there
Has anyone experienced any difficulties when starting weblogic in debugmode.
More specifically, it cannot start correctly because it thinks thatanother instance
is using the same port (definately not the case).
Any clues/suggestions are greatly appreciated.
Error log follows:
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <Unableto create
a server socket for port: 8320. java.net.BindException: Address alreadyin use
Perhaps another process is using port 8320.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Notice> <WebLogicServer> <SSLListenThread
listening on port 8321>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Emergency> <WebLogicServer> <TheWebLogic
Server is no longer listening for connections. You should probablyrestart it.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <Servershutdown
has been requested by system>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Alert> <WebLogicServer> <The shutdownsequence
has been initiated.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Info> <WebLogicServer> <Servershutdown is
commencing NOW and is irreversible.>
<Mar 18, 2002 7:42:32 AM GMT+10:00> <Error> <Performance Pack> <Unableto load
performance pack, using Java I/O.
java.lang.ThreadDeath
at java.lang.Thread.stop(Thread.java:581)
at weblogic.t3.srvr.T3Srvr.die(T3Srvr.java:764)
at weblogic.t3.srvr.T3Srvr.waitForDeath(T3Srvr.java:507)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:171)
at weblogic.Server.main(Server.java:35)--
Regards,
Stephane Kergozien
BEA Support

Error in Starting the Applicaion in DEBUG mode.

Hi all,
I am trying to DEBUG the Jave application in NETWEAVER DEVELOPMENT STUDIO. I am getting the Error REMOTE VM NOT CONNECTED.
If I am getting any tips to solve the error in DEBUG
I can proceed further.
Thanks in Advance.
Regards,
Ram

Hi,
did you follow the Debugging J2EE Applications tutorial located at http://help.sap.com/saphelp_nw04/helpdata/en/66/547f09281d464b951c9a3a6b06a12d/frameset.htm ? It tells you how to run your server node in debug node and debug the application from the developer studio.
Message was edited by: Ivaylo Ivanov

Adobe Photoshop CS6 provides no engine for debugging

Hello,
I've been trying to diagnose a problem with my wife's copy of CS6 Web and Design premium. Basically it's unable to run any JSX script that requires the Debug engine. I receive the error message 'Adobe Photoshop CS6 provides no engine for debugging' - trying it on Illustrator also gives a similar error. Persisting by clicking the 'play' button brings up a popup error message that says 'Unable to Run Script' or something similar.
Note that if I hack our JSX script to bypass the debug engine it works fine - except certain PSDs will cause CS6 (and my older copy of CS4) to crash, so this is only a stopgap measure. Disabling OpenGL on CS4 seems to prevent crashing but it's not an option on the wife's copy since she's a full-time artist and I'm not.
This is what I've had to change -
$.level = 2; // debug level: 0-2 (0:disable, 1:break on error, 2:break at beginning)
debugger; // launch debugger on next line
Changing the $.level = 0 lets me continue without issue.
This problem does NOT exist on my laptop using the same installer downloaded from Adobe.com. (I use trial version for testing, she uses her serial no.)
Is it possible this problem persists because I uninstalled an old copy of Photoshop CS5 (standalone installation) AFTER installing CS6 Web & Design (multiple programs)?
I've tried uninstalling and reinstalling CS6, but the problem persists.
Please help, our jobs rely on this. >.<
Worst case scenario I'll copy the entire install folder over from my laptop to try and fix the problem but I'd rather not have to since we're currently working in different countries and I can only use Remote Assistance to help.

The problem is the SCRIPTS work - the debugging engine is what's missing for some reason. Even if there's a way to just cleanly uninstall everything so I can start from scratch without formatting the hard disk would be a good solution. (since apparently I think I missed some files somewhere on the last uninstall)

In Debugging how can we view the normal data instead of Hexadecimal data

While i am debugging if i am checked internal table structure fields. Hexa decmial data is coming up. how can we check normal data.

If u r using Standard Debugger (Old Debugger) U will have a icon with + or - (search button type) beside ur fields. Click that. If that is in + mode u will see ur actual data, if it is in - u will see Hexa data.
awrd points if helpful
Bhupal

Can't Run program in Debug Mode

To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about 50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business Model we
are wondering if Forte is timing out during the partition phase or if the
server partition is running out of memory . The following error messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called: qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor", (partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available (0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada
-----------------------------------------------

Hi,
We have had the same problem in a non-express application
with a heavy server partition. In our case, the error was not
systematic, depending on the server workload at the time we
tried to partition and run.
The work-around we're using is to put the -fm flags (increasing the x
parameter to say 30000) in the 'server arguments' of your server
partition
properties in the partition workshop. Note that if your server is a Unix
platform,
you need to put double-quotes before and after the parenthesis in the -fm
syntax.
Hope this helps,
Vincent Figari
BTW, what Forte version are you using ?
On Tue, 2 Dec 1997 13:44:24 -0500 "David Wilbur"<[email protected]>
writes:
>
>
>
>
>
To: [email protected]
cc:
Subject: Can't Run program in Debug Mode
Has anyone else experienced this problem? We have written a
non-express
program that uses the Express generated services project as a supplier
plan. However, when we try running this program in debug mode about
50%
(or more) of the time we abend while Forte is trying to partition the
application. Since we have many database classes in our Business
Model we
are wondering if Forte is timing out during the partition phase or if
the
server partition is running out of memory . The following error
messages
are produced by Forte. Any suggestions???
=======================
Error messages on client:
=======================
SYSTEM ERROR: Unable to start the partition
testacadprogoffer_CL0_Part1 on
any
of the nodes to which it has been assigned. See the remainder of
the
error
stack for more information.
Class: qqsp_ResourceException
Error #: [1602, 593]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 5
Last TOOL statement: method overview.StartApplication
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Unable to start partition testacadprogoffer_CL0_Part1 on
node
admin2.
Class: qqsp_ErrorDescriptor
Error #: [1602, 592]
Detected at: qqcf_StandardConfig::LoadRemotePartition at 3
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
SYSTEM ERROR: Lost contact with remote server while trying to load
partition
testacadprogoffer_CL0_Part1. Check server log file for more
information
about
the specific problem.
Class: qqsp_ResourceException
Error #: [1301, 102]
Detected at: qqem_IPartitionAgent::Startup at 5
Error Time: Tue Dec 02 12:56:01
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: The connection to the partner was terminated by the
Communication
Manager for the reasons below.
Class: qqsp_DistAccessException
Detected at: qqdo_PartitionMgr::StopLocation at 1
Error Time: Tue Dec 02 12:56:00
Distributed method called:
qqrt_ForteExecAgentProxy.LoadPartition!6
(object name Unnamed) from partition "Forte_Executor",
(partitionId =
F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9, taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9.229]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Network partner closed connection. This usually means
the
process at the other end of the wire failed. Please go look there
and
find
out why.
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
INFORMATION: Received close: Connection aborted (10053).
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Tue Dec 02 12:56:00
Exception occurred (locally) on partition "Express_cl7_Client",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3,
taskId =
[F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10e9:0x3.226]) in
application
"FTLaunch_cl0", pid 65 on node DWILBUR_NTWS in environment
CentralEnv.
=======================
Log messages on server:
=======================
Attached to manager for node admin2.
aud Tue Dec 2 09:34:36 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 09:41:58 : Shutting down partition as requested.
aud Tue Dec 2 09:41:59 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 09:49:44 : Loading partition
testacadprogoffer_cl0_Part2
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:00:11 : Shutting down partition as requested.
aud Tue Dec 2 10:00:12 : Unloaded partition
testacadprogoffer_cl0_Part2.
aud Tue Dec 2 10:18:34 : Loading partition
testacadprogoffer_cl0_Part3
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 10:27:00 : Shutting down partition as requested.
aud Tue Dec 2 10:27:00 : Unloaded partition
testacadprogoffer_cl0_Part3.
aud Tue Dec 2 10:47:03 : Loading partition
EvaluateApplRequirementsBO_CL0_Part1 built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 11:09:26 : Shutting down partition due to failure of
agent
owner's partition.
aud Tue Dec 2 11:09:26 : Shutting down partition as requested.
aud Tue Dec 2 11:09:26 : Unloaded partition
EvaluateApplRequirementsBO_CL0_Part1.
aud Tue Dec 2 12:36:14 : Loading partition
testacadprogoffer_CL0_Part1
built on <unknown>.
Attached to manager for node admin2.
aud Tue Dec 2 12:45:17 : Shutting down partition as requested.
aud Tue Dec 2 12:45:17 : Unloaded partition
testacadprogoffer_CL0_Part1.
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
Task 11: qqcm_HoseRecvServiceTask::Run: Caught unexpected exception
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode: SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:49:01
Exception occurred (locally) on partition "Forte_Executor",
(partitionId = F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3, t
askId = [F88CCF80-FA5D-11D0-A2F1-DA164885AA77:0x10f3.11]) in
application
"Forte Runtime", pid 14020 on node admin2 in environ
ment CentralEnv.
FATAL ERROR: ************* Out of Memory, requested (1K) available
(0K)
Class: qqsp_ResourceException with ReasonCode:
SP_ER_OUTOFMEMORY
Detected at: qqos_MemoryManager
Error Time: Tue Dec 2 12:48:57
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
FATAL ERROR: Out of Memory (reason = qqOS_MM_EX_OUT_OF_MEMORY)
ERROR: TMgr.RunThread: task cm.Recv failed terminating.
Probably caused by a FATAL exception.
David Wilbur email: [email protected]
University of Windsor phone: 519-253-3000 ext. 2779
Windsor, Ontario Canada

Can not view contents of variable in debug mode (version 1.1.1.5.0)

Hi
I am running on WebLogic 11R1 and using OEPE 1.1.1.5.0.
When Fast swap is enabled and I run WebLogic in debug mode using OEPE I can not view the contents of variables with the Eclipse debugger. I get the message "Expressions must contain either an expression or a block containing a well formed statement"
However, if I disable Fast swap, i can view the variable within the Eclipse debugger
Has anyone else had this problem?
Regards
Steve H

Small correction... the soon-to-be-released version of WebLogic Server that Danny was referring to is 11gR1 PatchSet 2 or 10.3.3.

Unable to debug indesign cs5 plugin in windows

Hi, again. Originaly posted here: http://forums.adobe.com/thread/766469?tstart=0
We are having some problems with an indesign sc5 plugin, it works perfectly in macosx but in windows it causes indesign to crash. Anyway after some trouble shooting we tried running it in debug indesign. Problem is that the debug version of indesign wont even start, it fezzes in the splash screen on "Registering xxx plug-ins". It hangs before we can write anything in log files and thatching a debugger gives nothing. Closer inspections
revealed that all the indesign treads is in "waiting" state. Waiting for what? Don't know. Killing one of the threads allows indesign to start but it will not have loaded the plugin and we are back on square one unable to debug.
Anyway I installed the osx version of debug indesign and starting it gives an assert like:
No translation of key 'com.adobe.rc.operationalmessages' to British string.
BreakStrToDebugger
ASSERT_FUNC
Examining the stack of the indesign main thread in windows gives pretty much the same thing:
0, ntkrnlpa.exe!KiDeliverApc+0xb3
1, ntkrnlpa.exe!ZwYieldExecution+0x19ae
2, ntkrnlpa.exe!NtWaitForSingleObject+0x9a
3, ntkrnlpa.exe!KeReleaseInStackQueuedSpinLockFromDpcLevel+0xb14
4, ntdll.dll!KiFastSystemCallRet
5, kernel32.dll!WaitForSingleObject+0x12
6, PMRuntime.dll!ClientShowAssert+0x8d
7, PMRuntime.dll!BreakStrToDebugger+0x15
8, PMRuntime.dll!ASSERT_FUNC+0x117
9, NETAPI32.dll+0xbe86972
(as reported by the ProcessHacker process viewer)
So the win version is trying to show an assert window but fails, locking indesign in the splash screen? Stoping indesign before any plugin execution?
As we cant get any debug information out we don really know what the problem is, making it rather hard to debug. We have triple checked the build and linking options. Studied the plugin exports. Inserted an ridiculous amount of trace statements in the code, doesn't work in the debug version but anyway.
Have anyone had a problem like this or know what might cause it?
What happens in the indesign startup process, what does the “Registering plug-ins” actually do? It's not executing any plugin functions and the the initialization of the plugins doesn't happen until later.

You are correct in that none pf the plug-in code is executed during the "Registering ### plug-ins" phase. What is done here is simply loading the plugins by reading from their resource definitions. For example, if you try to load a CS4 plug-in in InDesign CS5 or if you try to load a release plug-in in debug version you will get errors and popups here and your plugin will not load and be available (these are just example errors and may not be relevant to your case). As far as I know InDesign should not crash just because there is a problem with your plugin, but there could be bugs.
I would recommend:
1. Remove your plugins and verify that InDesign debug starts properly without any 3rd party extensions.
2. Compile one of the SDK sample plugins (debug target) and make sure that InDesign still starts properly.
3. Create a new project using DollyXs, compile it and make sure it loads in InDesign.
4. Remove the template files and add your own source files except the basic .fr file and make sure it still loads in InDesign.
5. Keep changing things one at a time in your .fr file and verify it still loads until it looks exactly like your original .fr file.
Good luck.
Note: "No translation of key 'XXX' to British string." errors is in general quite harmless. It's only a problem with the string translation and should only affect string output in menus/dialogs etc. They should of course be fixed, but can generally be ignored for a while unless an infinite ASSERT loop prevents you from debugging.

Unable to debug in Eclipse 3.0 with Tomcat5.0

Hi there,
Not sure, if this is the right place for this query. I'm using Tomcat 5.0 as local development server and use Eclipse Platform IDE Version 3.0. For sometime I've been facing this weired problem. When I put a breakpoint in a servlet generated by jsp, a new window opens up in the debug mode saying
"Source not found for issuePolicy_jsp._jspService(HttpServletRequest, HttpServletResponse) line: 109" For some existing jsp's it works fine, but for some I get this problem. I've not been able to figure out this arbitrate behavior.
Please help me out. Thanks in anticipation.

Any idea, anybody?

Unable to debug user exit in CRM BW (EXIT_SAPLRSAP)

Hi Gurus,
Please help me to debug user exit in CRM BW.
I am using below enhancement
RSAP0001 (Customer function calls in the service API)
"EXIT_SAPLRSAP_003"
Datasource is ZSTAONESYS0_TEXT
The extract structure
I have modified is "CRM_BIW_ST_T"
===========================
Data Source "I_CHABASNM"
CASE i_chabasnm.
ZSTAONESYS0_TEXT -- Data source name
WHEN 'ZSTAONESYS0_TEXT'.
    CLEAR l_s_crm_biw_st_t .
    LOOP AT c_t_texts   INTO l_s_crm_biw_st_t .
      l_tabix = sy-tabix.
      SELECT SINGLE * FROM crm_jest
               INTO   wa_status
               WHERE   inact = ' '.
      SHIFT wa_status-stat LEFT DELETING LEADING space.
      CLEAR l_stat.
      l_stat = wa_status-stat(1).
      IF l_stat = 'E'.
        l_s_crm_biw_st_t-bwstoppt   = wa_status-stat+3(2).
        MODIFY c_t_texts FROM l_s_crm_biw_st_t
                              INDEX l_tabix.
      ENDIF.
    ENDLOOP.
ENDCASE.
===========
Should I use a BADI?
It would be great if you could give me
relevant definition name for creating new BADI.
Can I use "CRM_BWA_MFLOW" ?
I promise to return and reward the answers.
Really heart warming
to see the dedication/ participation of
Bhanu Gupta / A.H.P / Pizzaman and many others
Thanks in advance, :-D
AbyJacob, Bangalore
===================

Dear SB,
I was able to Debug my user exit successfully.
==>include ZXRSAU02. "EXIT_SAPLRSAP_003"
You guys are really a big help
Keep up the good work.
Special Thanks to SDN community
warm regards,
Aby Jacob, Bangalore

How to debug in SAP Netweaver Developers Studio?

Hi there,
I am trying to debug and slove my error in SAP NWDS.
I am building portal application->JSPDynPage
I am trying to debug the jsp code behind page, it doesn't realli give error message like the java beans does.
I am quite new to this and do not know how to set the function to test and debug this page can anyone provide any solution ?
I have have this prob pls refer to this link
<a href="https://www.sdn.sap.com/irj/sdn/thread?threadID=192104">https://www.sdn.sap.com/irj/sdn/thread?threadID=192104</a>
Thanks loads
Quatre

Hi Quatre ,
-Select the breakpoints in your Dynpages /beans in ur project
-To debug u have to change the prespective to debug which u can find in
window/open prespective /Debug in NWDS
-Select the Run/Debug or the Debug icon in the toolbar.
-Fill the project name ,application name in the in the wizard opnend .
- Follow the debugging using the next step over F6 ,step return F7 keys .
These link may be helpful:
http://help.sap.com/saphelp_nw2004s/helpdata/en/66/547f09281d464b951c9a3a6b06a12d/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/def86ab54da5418a3575373934ca00/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/d4/31e24044b80b06e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/cffcb407c67842b122bd1296dc810f/frameset.htm
U can always find out the way in the PDK development /how to debug/
ie in NWDS /HELP /SAP WAS AS Documentation /SAP J2ee Enterprise Java Beans/Java development User Guide /Running and Debugging
Cheers,
Swathi Rao
Do offer pts:-)

RFC Connection error message while Debug the running WebDynpro app

Dear friends,
I am trying to debug WebDynpro application.
After configuring the NWDS with the J2EE server instance, I try to run the WebDynpro application, which I want to debug.
I did selecting the application and run after putting breakpoint at a button click.
But the webdynpro application uses 2 JCo destiantions, and so it gives JCOClientConnection for logical System: ... Please assure that you have configured the RFC connections and/or logical system name properly for this model! message.
If I run the same application from the portal, it doesn't give such error message.
Can anybody help me how can I run the WebDynpro application for debug purpose without getting this error message?
Thanks and regards,
Lakshmikanthaiah

Hi,
are you running the application on the same server? Or are you using the Debugmode on your local installation.
If so, you should check the JCO Destinations on you local server.
<a href="http://localhost:50000/webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole">http://localhost:50000/webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole</a>
Regards,
Dennis

Debugging in 4.7

Similar Messages

Maybe you are looking for