Debugging queue related issues

can the  forum provide me blogs and docs for debugging queue(inbound and outbound) related problems in XI,

Hi
Check these threads
/people/sap.india5/blog/2006/01/03/xi-asynchronous-message-processing-understanding-xi-queues-part-i all details about queue processing
Inbound queues in R/3
debugging/errors in queues
How I can configure automatically queue message processing?
Queues not automatically processed in SMQ2

Similar Messages

  • EHP4 - Add on Queue related issue

    Hi,
      We have installaed EHP4 Stack 03 last week on our sandbox, now we are in a situation of applying another technical usage
    (SAP_APPL 604). From MOPZ (solution manager) i selected the sandbox system and it showed the following 4 components to be installed :
    SAP_APPL                      604       0003
    IS-PS-CA                      604       0003
    EA-PS                         604       0003
    FI-CA                         604       0003
    and the same is available in the XML file created. After downloading those addons  i started the installation again using SAPehpi installer.
    Two issues:
    1. It could not automatically connect to the solution manager so alternative it asks for XML file which i gave, it took it and extracted the above mentioned 4 addons onto EPS/in automatically.
    2. During the BIND_PATCH phase it showed the list of components appliedin the system but the Minimum Level column is either <NONE> or <UNKNOWN> and all of the Equivalent Level rows forall components in <NONE>, if i type the current level value or anything on the Selection column or leave it blank and press OK the following error is coming:
    Addon Queue not selected or could not be calculated and
        3EETN582    Software component "ECC-DIMP" rel."603" is required
    3EETN582    Software component "FI-CAX" rel."603" is required
    3EETN582    Software component "INSURANCE" rel."603" is required
    3EETN582    Software component "IS-CWM" rel."603" is required
    3EETN582    Software component "IS-H" rel."603" is required
    3EETN582    Software component "IS-M" rel."603" is required
    3EETN582    Software component "IS-OIL" rel."603" is required
    3EETN582    Software component "IS-UT" rel."603" is required
    Either include the above ones or continue and put in IS_SELECT phase, but even if i continue it tries againsame BIND_PATCH from where it is stopped or from starting of the phase and fails again with above required error....
    When the XML file does not have theabove ones why this error is coming ? Even i downloaded all these and kept in the download directory as well as uncared into EPS/in but still same error.
    Any help on this greatly appreciated.
    Thanks,
    Murali.

    Hi
    > 1. It could not automatically connect to the solution manager so alternative it asks for XML file which i gave, it took it and extracted the above mentioned 4 addons onto EPS/in automatically.
    In order to connect it to solution manager automatically you need to check configuration as mentioned in the installation guide. You have to follow below step:
    a)     Log on to system that needs to be upgrade.
    b)     Go to transaction SM30
    c)     Open table BCOS_CUST and create following entry:
    -     Column 1: Application: OSS_MSG
    -     Column 2: +: W
    -     Column 3: RFC Destination: RFC Destination to Solution Manager
    -     System
    -     Column 4: +: CUST620
    -     Column 5: +: 1.0
    This is what SAP guide tells. But i tried it many times and it did not work .
    > 2. During the BIND_PATCH phase it showed the list of components appliedin the system but the Minimum Level column is either <NONE> or <UNKNOWN> and all of the Equivalent Level rows forall components in <NONE>, if i type the current level value or anything on the Selection column or leave it blank and press OK the following error is coming:
    >
    >  Addon Queue not selected or could not be calculated and
    >     3EETN582    Software component "ECC-DIMP" rel."603" is required
    > 3EETN582    Software component "FI-CAX" rel."603" is required
    > 3EETN582    Software component "INSURANCE" rel."603" is required
    > 3EETN582    Software component "IS-CWM" rel."603" is required
    > 3EETN582    Software component "IS-H" rel."603" is required
    > 3EETN582    Software component "IS-M" rel."603" is required
    > 3EETN582    Software component "IS-OIL" rel."603" is required
    > 3EETN582    Software component "IS-UT" rel."603" is required
    As far was installation of these packages are concerned you need to have 603 version as it is pre-requisite of that. Second check permission on these package in download directory and EPS/in box.
    Check SAP  Note 1022704 - Upgrade phase EHP_INCLUSION and SPSTACK_REQUEST
    Thanks
    Sunny

  • How to debug signal related issues with mdb

    I have a C++ application and occassionally it core dumps receiving a SIGABRT signal. We are not able to find the source of the SIGABRT signal. All we have is the core. Is there a way to find out who sent SIGABRT to our process? For that matter if someone sends our application a SIGABRT using kill cmd asynchronously, how does one find out who has sent the same? We can't keep truss'ing the process as it's a production env. Is there a way to find this out from the core file?

    I don't have a specific suggestion, but these ideas might help you.
    I assume by 'cannot be resumed' that you are able to launch the application, but after leaving the application and returning back to it, the app crashes? Or is it that you can run the app once but never a 2nd time (even after it fully closes)?
    What kind of app is it? WP7, WP8, WP8.1? Silverlight or WinRT? It might not make a difference but it might make it easier to find a solution. I suggest looking up the application life cycle relevant to the version you are targeting.
    Is your app.xaml.cs doing anything out of the ordinary or is it just the default code?
    Here's what I would try: put a breakpoint at the start of every method in App.xaml.cs/VB and hope one is hit! Not very helpful, but you might get lucky. I'm not too well versed in app resuming, but is the app navigating back to the page it was on when tombstoned?
    Perhaps the issue is in the page OnNavigatedTo or the Loaded event handler (if you have one).
    When my apps fail to launch and don't hit any breakpoints it usually ends up being an issue in XAML, not code behind. But I don't think your problem fits that becuase you can clearly launch the app, just not resume it.
    I'm sure you've probably tried most of those things, but hopefully I thought of something you missed and it turns out to help :)
    Visit http://blog.grogansoft.com/ for Windows development fun.

  • Can we set up a forum for Security related issues?

    I know many of us think security is a Windows related issue, but from time to time there are security issues that may come up. I had a question so I looked and couldn't find a forum, so I posted in one of the OS X 10.6 sub forums.
    Thanks!

    I am a co-founder of Calendar of Updates http://www.calendarofupdates.com/updates/index.php?act=idx This is a site that is primarily a Windows based security forum (I switched about 4-5 years ago). Over the years, I've tried to grow the Mac side of our forum, but, as you may know, there is little or no interest in security within the Mac community. For many, the feel security is a Windows issue.
    It's a free site, so don't think I have a vested interest in growing the membership, I'm not an owner, either.
    I just created an *Apple OS X Security Issues* forum http://www.calendarofupdates.com/updates/index.php?showforum=209
    Right now it's an empty forum since it was created 10 minutes ago. Please feel free to join the forum and share security related issues and questions.
    I am not aware of any other forums that deal with OS X security issues
    exclusively, so this forum could be a good place to bookmark and visit from time to time.

  • To everyone with IOS6 Sound related issues & Others

    If you are facing a problem of not having any system sounds, notification sounds, no calls or other software sound related issues I'd suggest you read below it's a stupidly simple fix and it should solve most software issues after an immediate iOS6 update:
    After updating unplug the phone from your computer and leave the phone alone for 5-10 minutes, if you still have problems: reboot, wait a few minutes and all sound related problems should be fixed.
    When I updated to iOS 6 I had lost my system sounds, so I unplugged from the computer, rebooted the phone and still no go. I decided to just let the system "settle in" for a bit, let it lock and when I unlocked after 5-10 minutes sounds were back and everythings up and running again.

    Well, to break it down. After my sounds finally came back (2nd time losing them) last night I decided to restore the phone in itunes. I did it twice. First time I backed up my data. Second time I restored it as a factory iPhone. Both times guess what NO SOUNDS! I also realized that last night I had lost my sounds after charging my phone and unplugging it from the data cord. I still have ringtones (when someone calls), but text messages, emails, and any other alert tones do not work. I cannot turn the volume up or down with the side buttons and also music does not play. It doesn't even have a slide bar at the bottom.
    I am on the phone with apple care now. They seem to not be aware of the problem at all.
    While I was on the phone with them my sounds ended up coming back, imagine that. Hopefully every time I charge my phone I am not going to have this issue.

  • Many Sporadic Preview Related Issues

    Not sure if this is where to post/report Lightroom 5 issues or not, but here are preview-related issues I am experiencing...
    Preview panel "preview" freezes indefinitely.
    App very slow to load while creating new previews. (previews take forever to create and update)
    Wrong previews showing for wrong images when swapping between folders, etc. (ie: all photos, last import, custom collections)
    This one is a little different...
    Ratings lost when switching between folders, etc. (ie: all photos, last import, custom collections)
    This was a clean install that ran beautifully at first. Started noticing this more and more after using the spot tool. (my last step in processing a job)
    I use separate catalogs per job. Some as small as a few dozen images. (family stuff) Others, as large as 500-600. (engagement and wedding clients)
    Hope you are working on this. It's making work a struggle. I'm not just a "consumer". ;-)

    This is a user to user forum so the responces you recieve here will mostly be from users like your self. I am sure someone will respond on how to help dealing with the problem you are experiencing.
    The official forum for reporting bugs and making feature requests is at the web link below.
    http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

  • Unicode related issue in 4.6c to ECC 6.0 upgrade

    Hi
    I am doing upgrade from 4.6c to ECC 6.
    Here I am getting one unicode related issue.
    "The data object A948 does not have a component called ZZMATWA.".
    This type of issues , how can I resolve.
    I am very new to upgrade, Plese do help me.
    Regards
    Sandeep Reddy.

    Hi,
    Can you give the error what you are coming across.
    Regards,
    Suhas

  • How to add data in related issue field in issue tracking list sharepoint 2013

    Hi,
    I'm using out of box Issue Tracking List. In Related Issue I want to add some data like :- Business, Technical, HR, Contractor etc in right side so user can select one of them add it. Not sure how to add these data in Related Issue column. Please advice.

    Related Issues is a lookup column to the same list which is Issue Tracking List. so you can add new items where title is Business, Technical, HR, Contractor etc then you will get those under related issues.
    My Blog- http://www.sharepoint-journey.com|
    If a post answers your question, please click Mark As Answer on that post and Vote as Helpful

  • In PP Interface related issues the role of functional consultant

    In PP Interface related issues what is the role of functional consultant .  what is the approach steps to analyse and resolve the issues  in XI, interface, idoc, etc.,

    For issues relating to interfaces, a functional person would need to diagnose what is causing the issue & thereby informing the technical person where to fix it, if the issue is due to system setup.
    As regards to the steps, I just wish there was a manual which read something like
    10 steps on how to analyze....
    unfortunately there is none that I have come across or even if one is ever written on those lines will be very specific, so not much of use for your need. A good approach would be to have a clear understanding of what the interface is supposed to do, which would assist you in fixing the issues.

  • How to Handle BARCODE related issues in WebDynpro ABAP

    Hi All,
    How to handle barcode related issues in WDA?
    is it possible in WDA or not?
    please provide information or any links related..
    Thanks,
    raj.

    Hi ,
    You just need to install the software comes with the barcode scanner in the local PC and while reading you have to put the cursor on the field like inputfield . a barcode when interpreted by scanner is nothing but alphanumeric words.
    Regards
    Yash

  • Performane related issue in Production Server

    Hi,
    when i deploy the whole application in development server (by remotely logging into client server through vpn) it works fine .
    But when it is run at client side for system testing, user acceptance testing and
    integration testing it becomes very slow .
    Due to this performance related issue , we are not able to transfer the DCs to production server .
    We are sure it is not coming from R3 side (BAPIs etc) . It is coming either from the Webdynpro or Portal side .
    Can anybody help out regarding how to solve this issue .
    Thanks .

    Hi Narendra,
    Please elaborate what is QAS customization and production  customization.
    TR has been done properly.
    Let me give you an overview of the project.
    In Organisational Assignment a Zprogram has been written which captures additional information like Grade Code, Designation Code & Pay Sheet Code
    Its a govt. client. Combination of Grade Code & Designation Code is Pay Scale Grouping
    e.g if Grade Code is A01 & Designation Code is A005
    Pay Scale Grouping is A01-A005
    If we put the values in 0001(Org Assignment) for Grade Code(A01) & Designation Code(A005), A01-A005 comes automatically in Pay Scale Grouping for a particular Pay Scale Structure.
    But now the problem is Pay Scale Type doesn't come get defaulted in 0008 for a Personnel Area & Personnel Subarea.
    I have maintained PST in Tariff & Check Assignment of Pay Scale Structure in Enterprise Structure.
    But in 0008, We have to put PST manually. Since client is having only 1 Pay Scale Area for all Personnel Area & Personnel Subarea, so we don't have to bother for it
    Please tell me where can be the error
    Regards,
    Usha

  • System relate issue

    Hi friends,
    im in guess of where to post system related issue, since this is my problem
    run --> drivers --> host file,
    i couldnt able to edit & save host file.
    Tried below steps:
    1. host --> properties --> Security --> add --> everyone --> given full control also.
    2. Not able to do that in administrator account alsoWhich is the right place to post this question.
    Regards,
    Saro
    Edited by: Saro on May 17, 2011 12:48 PM

    Hi,
    Probably in your OS provider support forum?
    Regards,
    Jari

  • Oracle DBA related issues ?????

    where can i discuss DBA related issues?
    thanks

    The standard tasks necessary for the SAP system are supposed to be done via the brtools which can be triggered from within the SAP system if needed.
    The reason for this is that SAP does not use all of Oracle's functionalities (some may be even harming the SAP system). Therefore SAP recommends to administer the db only via the brtools to allow a safe administration taking into account the special requirements of the SAP system.
    If you need to know more about the functionality of the brtools I suggest you use help.sap.com or use the SDN information given.
    Kind regards,

  • Security related issues

    Hi everybody,
    We know that weblogic stores all its configuration
    parameters in an xml file,including the userid and password for the database
    in clear text form .
    I want to know whether it is a security flaw?
    Is there a way to encrypt the file contents,so that the userid and password
    will not be in clear text form.
    Any suggestions to increase the security on the config file by appliying os
    restriction or by any third party tool will be helpful.
    Thanks in advance
    prashant

    I am a co-founder of Calendar of Updates http://www.calendarofupdates.com/updates/index.php?act=idx This is a site that is primarily a Windows based security forum (I switched about 4-5 years ago). Over the years, I've tried to grow the Mac side of our forum, but, as you may know, there is little or no interest in security within the Mac community. For many, the feel security is a Windows issue.
    It's a free site, so don't think I have a vested interest in growing the membership, I'm not an owner, either.
    I just created an *Apple OS X Security Issues* forum http://www.calendarofupdates.com/updates/index.php?showforum=209
    Right now it's an empty forum since it was created 10 minutes ago. Please feel free to join the forum and share security related issues and questions.
    I am not aware of any other forums that deal with OS X security issues
    exclusively, so this forum could be a good place to bookmark and visit from time to time.

  • Credit management related issue - please respond ASAP

    Hi,
    I have a credit management related issue,
    The requirement is as below:-
    If receivables value is zero for a customer and after a sales order is saved and delivery is created, a check should happen to see if the GROSS (Total including VAT) , not Net, value exceeds the credit limit  for that customer and the delivery doc should be blocked and then del doc will be released by the credit reps using VKM5.
    My client wants the orders to accepted always and delivery notes created but the delivery notes should be  blocked from further processing.  They are then released by the credit reps using VKM5.
    If receivables value is more than zero,then system response is OK.
    I understand that Customer's credit limit is the amount entered whichrepresents an upper limit for the total receivables and the foreseeable receivables from the customer.
    If the  Receivables value is zero, system will not check the credit limt value at all.
    Thanks,
    Rohit
    Edited by: rohit rathi on Apr 8, 2010 11:16 AM-updated
    Edited by: rohit rathi on Apr 8, 2010 11:18 AM

    Hi Rohit,
    1.If you don't want to perform check on sales order stage, then you could leave the credit check as blank for the sales order type.
    2.Please leave the field "credit active" as X for the sales order item category. Then even the check itself is not performed, the credit value is updated when saving the order.
    3.The credit price is copied from sales order to delivery document. If you would like to configure which value(Total including VAT) should be taken as the credit price, the configuration is done in V/08. Define the line as subtotal=A. Then the amount is taken as credit price.
    4.You could create your own routine and assign it to OVA8 no check if you want the credit check not being performed when Receivables value is zero. However from my point of view, it doesn't make so much sense to do that. For example, one big order could expeire the credit limit and make the receivalables with a big amount.
    Best regards,
    Smile

Maybe you are looking for

  • Enterprise Manager Console: Jobs stay at Submitted in the jobs panel.

    Hello, Like the title said, every time I try to backup/export a DB, the jobs get Submitted but the backup never occurs. When I try to delete those jobs, the status is set to Deleting and stays that way. I dugg around and found out It has something to

  • File Listing in FTP Adapter

    Hi All, I have given below the jca connection factory details. I am creating dynamic ftp using jca.jndi and I would also like to overwrite the IncludeFiles property dynamically. At runtime i will choose what type of files that i need to list(xml, txt

  • *NEW IDEA* Document Management Specification

    Hello. I am a final year software engineering student (Southampton, UK) and im thinking about developing a document management system as a part of my final year project. i have the notion that if the criteria for searching for documents was departmen

  • Preventing "back" on cfcontent

    I am sending a PDF file with cfcontent. It loads acrobat inside IE but the BACK button is enabled which tries to reload the sending page which then gets error that the file not found (cfcontent had the deletefile-yes). how can i prevent the back opti

  • Multi Instruments??

    i have a multi instrument set up (NI Battery 3), i have activated 4 stereo channels and 16 mono channels in the battery plugin, but when i go to my aux channel there are only ever 10 battery inputs to choose from? there should be 24 (4x stereo + 16x