Decimal Notation in SMARTFORMS to use plant default instead of user

Hi All,
Currently, the form is printed sometimes using user decimal notation and sometimes using plant.
For new plant, the default is still 123.456,00.
However, the user one is 123,456.00.
At times, when the user tried to print invoices and etc, it will come out as 123,456.00 but at times, it comes out as 123.456,00.
The form output should be using either plant or user.
Where is the settings which can be changed?
Thanks in advance for all your help.

Hi,
The decimal notations depend on the country settings specified in the system.
Hence, you can override the settings by using program lines in smartforms in which you can write as below.
SET COUNTRY 'US'. ( example taken as US ).
So, whichever country decimal notation you want in the display you can set it like above.
Regards,
Ram

Similar Messages

  • Decimal notation in Smartforms

    Hi,
    We have two  smart from USD in one smart form it is showing as  14,840.50 in USD whereas for other smart forms it is showing as 14.840,50 USD.and both the invoices has been raised for the same customer whose country is belgium and currency is USD.
    As far as i know decimal notation done in User id in SU01 default tab and country specific also we do decimal notation.
    At present we have 1.234,56 decimal notation for Belgium in country setting and 1,234.56 in user id setting.If i changed country setting to 1,234.56 thn it shows value as 14,840.50 in the second smartform also which is our requirement.But why there is a different presentation of decimal notation?On what basis decimal notation happens in SMARTFORMS.
    Regards,
    SATYA

    Hi Satya,
    You might want to check the language of the smartforms, the translations and the restricted language control in the form attributes.
    hope it helps,
    Edgar

  • JPY Currency - Decimal Notation in SMARTFORMS

    When outputing an amount field how do you ensure the correct number of decimal places is displayed in smartforms?

    Hi Terry,
    abap-coding is:
    data: amount type bseg-wrbtr,
          hval(20).
    write amount to hval currency bkpf-waers.
    regards Andreas

  • Autoscroll using Win7 default instead of Firefox override

    It appears that Firefox implements it's own version of autoscrolling on middle click on Windows 7. I say this because the icon does not look the same as in other Windows apps, and more importantly because of a specific behavior difference. In applications that use the generic Win7 autoscroll, moving the wheel up or down will cancel the autoscroll. Firefox doesn't do this; it moves a the page a little bit thanks to the scroll moving, but the autoscroll is still on. There does not appear to be a way to make Firefox just pass through the middle click to Windows, nor is there apparently a way to cancel on wheel movement. Is there any thing I can do to get this behavior? Thanks.

    Although not common, I am apparently not the only one who cards about this:
    https://support.mozilla.org/en-US/questions/802742?s=autoscroll&r=11&as=s
    I did not see that thread before I posted, although I am asking for something slightly deeper. I want an option to use the Windows default autoscroll / pan function rather than Firefox's override of it, which as a nice side benefit will give me the functionality of cancelling on scroll wheel movement.

  • Can I use "~" in Automator instead of user's home folder?

    I want to create an Automator action that I send to someone that can put a file in their iTunes Folder. If I create it on my computer however, Automator uses the actual file path to MY iTunes Library.
    Is there a way to use the "~/Music/iTunes/" to have Automator use a relative link to THEIR home folder?
    Can't figure this one out. Thanks

    Use ~username/Music/iTunes
    Be aware that you will have to change the permissions on ~username's Music and iTunes folders to allow you read and write access. All users be default have read only access to other users' iTunes folder and no access at all to the Music folder.

  • [Solved] Sudo: use admin password instead of user password?

    Sudo's default behavior is to ask you for your user password when you initiate a sudo command.
    How would you modify sudo so that it asks for the admin password instead?

    You would consult the excellent Arch wiki:
    http://wiki.archlinux.org/index.php/Sudo and http://wiki.archlinux.org/index.php/Su
    Please refrain from opening new threads when the answers have been provided for you and would be obvious with just the smallest effort on your own part.

  • Changing the Decimal Notation of Invoice Smartform

    Hi Gurus,
    Is there a way to change the decimal notation of Standard Invoice Smatform "LB_BIL_INVOICE" ?
    I want to change the decimal notation of Smartform from "1.234.567,89" to "1,234,567.89".
    Please reply.
    Points will b awarded...
    Thanx in Advance..

    there are 2 ways that you can set these
    1. Go to SU01, change the defaults Decimal Notation to X 1,234,567.89
    2. If you have done 1st step, the notation still didn't change, put the below code in the initialization of smart forms:
    SET COUNTRY ' '.
    These should solve your problem.

  • Use custom Decimal Notation

    In user master there are three default decimal notation. We want to define a new decimal notation format.
    Is it possible to define a custom decimal notation format.
    We changed the domain "XUDCPFM" & add one new format. New format is visible in SU01 decimal notation dropdown list. But when we assigned it to the user, output is not appeared as per mentioned format
    Edited by: HP BASIS on Mar 23, 2009 12:42 PM

    I had the same problem
    You have to log off and log on SAP to take changes.
    It works for me.
    Edited by: Eduardo Luiz Nunes Ribeiro on Apr 22, 2009 3:39 PM

  • Default decimal notation in user profile

    Dear All,
    Is there any way by which we can ignore decimal notation saved in user profile.
    I need to set the decimal notation 1,234,567.89 irrelevant of user profile setting. If user has saved any other optios for decimal notation in user profile then also i need to set the decimal notation as 1,234,567.89.
    Thanks a adv.

    Hello
    So, for this I have created in OY01 three countries:
    Z1 with decimal notation 1.234.567,89
    Z2 with decimal notation 1,234,567.89
    Z3 with decimal notation 1 234 567,89
    When I need to use in report some decimal notation I set particular country:
    set country 'Z1'. " output will be in format 1.234.567,89
    " or
    set country 'Z2'. " output will be in format 1,234,567.89
    " or
    set country 'Z3'. " output will be in format 1 234 567,89

  • Setting Default Decimal Notation with ISA User Admin

    Hello all,
    I have been trying to find out how I can select a default decimal notation when creating users via ISA User Admin.  My client wishes the default notation to be 1,234,567.89.
    In advance, many thanks
    Jon

    Gun
    Thanks for your response.
    The problem is that customers will be creating their own users via Web Based User Management.  Currently the only way we can amend the decimal notation is via SU01.  This, then, would have to happen for every user because the default notation is not the one we require.  My question is - is there a way of setting the default decimal notation for each user so we do not need to manually amend each user in SU01.
    Thanks,
    Jon

  • How to do setting of  decimal notation and arithmatic and character note

    Hi colleagues
    I do have one problem
    And the following setting tried in SAP netweaver so do not give any hint for Netweaver
    The problem is stated as follows
    in output type in Germany they use , instead of . the dot signifies point that is .
    and we use , as a seperator in means suppose we have to write 2000 we write like wise means as per our requirement whether we need to mention 2.000 or 20.00 but in germany they use comma ,
    so in output type display point the problems are increasing and they are not getting solved.
    so it is the question of compatibility
    what went wrong i am unable to understand
    is there is any significance of country specific setting of decimal notation
    or any thing need hint towards the same.

    Hi
    For your output type assign a smartform and in the smartfrom write the program that the decimals should come like , instead of . then your requirement can be fulfilled
    Also check in OY04 wheather you can maintain or not
    Regards
    Srinath

  • How to get decimal notation in 'SU01'?

    Hi guys,
    You know that when we process the currency, it needs to know what the user have set the decimal notation.
    You can run tcode 'SU01',click the tab 'default' to see it.
    So how to get the user the setting?
    Any function module ?
    Welcome any ideas.
    Thanks very much.
    --James Liu

    make use if table
    USR01
    USR01-DCPFM     XUDCPFM     CHAR     1     0     Decimal notation
    possible values:
              1.234.567,89
         X     1,234,567.89
         Y     1 234 567,89
    regards
    Prabhu

  • Decimal Notation in Forms as per his SAP Decimal Notation

    Hi,
    We need to display all numeric fields in the Adobe Form as per the Decimal notation of the User in his SAP user defaults.
    Also, we need to take care that the currencies have current decimal places.
    Please let us know if this is achievable in Adobe Forms. Is there a way we can set the number format of a field dynamically in Adobe.
    Any pointers in this regard is highly appreciated.....Thanks in Advance.,
    Raghavendra

    Hi Raghavendra,
    to be bale to decide in your abap-printprogram, which format to use for printing, you can read the decimals and number format from customizing (or user) and then pass into form through an additional interface parameter format_string of i.e. CHAR060.
    Place your format string in a hidden textfield on your form
    This format string can then be used in the adobe form to format the text-field using script:
    this.format.picture = your_hidden_textfield.rawValue;
    we do so for date-formats and currency-formatting we read out of the country customizing.
    regards

  • Decimal Notation settings

    Dear Community,
    I would like to know if is it possible use on SAP  the " . " key of the numeric keyboard as a " , " symbol like we use on MS Excel by regional settings done on Control Panel of windows OS. In excel If I press the " . " on numeric keyboard we get  a " , " by regional settings as I said.
    I have set my User profile / own data / Decimal Notation with 1.234.567,89 but doesn't work.  Also, our "Country global parameter" (OY01) decimal foramt, is set as 1.234.567,89
    The regional settings on Windows OS is set for decimal notation as 1.234.567,89  but SAP always get the " . " key of the numeric keyboard as a ". " not like the desired " , ".
    Could anybody help me with this?
    Regards
    Scottie

    Hi Nils,
    Thanks for your reply. I have checked on Control Panel / Regional Settings / Regional options / customize your own format is set with our language (country), so number notation is: 123.456.789,00.
    On MS Excel I can check this settings is working OK, so on numeric keyboard part, if I push the "." key, on Excel we get an "," symbol instead "." so regional settings is working ok ouside SAP.
    On SAP, on menu System / User Profile / Own Data / Default sheet / Logon Language and Decimal notation is set like 1.234.567,89  ,as Control Panel on Windows OS but when I push on numeric keyboard part the "." key we get the same symbol "." instead desired ",".
    We are using SAPGUI 720 patch 6 but we have tested with SAPGUI 710 patch 19 with same wrong result.
    If I change as you told me on SAPGUI the decimal notation to 1,234,567.89 works ok because get the "." as decimal format, but we need to use "," symbol.
    What could be the reason for this?
    Thanks in advance
    Regards
    Scottie

  • Decimal notation for ESS

    Dear Expert,
    We are on ECC6 with EP7. When my user try to apply leave on the portal, the system show 1,00 day. Anyone knows how to change it to 1.00?  My users prefer to use dot instead of comma to separate the decimal.
    I have check on SU01 and the decimal notation shows correctly. However it just does not work in portal.
    Can someone help?
    Thanks
    Regards,
    Bryan

    Hi Brian,
    have you checked the language of the user? Notations and date formats are governed by the language on the user. If the language is not set in the backend, it will pick the default locale on the portal or the browser language.
    Cheers,
    Dion

Maybe you are looking for

  • Display files in a folder...

    Hello, all.  I'm using the stored procedure xp_dirtree to list the files (PDFs in my case) in a folder.  In Mgt Studio I correctly get the results.  However, I want to use the query results in an SSRS report so that the user can click on a report nam

  • ITunes 10.1.0.56 Distorts Computer Sounds When I Connect My iPhone 4

    I have an ASUS Notebook. Attached to a USB port is an M-Audio Fast Track Pro, which I use as an external Sound Card, and which is connected to external speakers. When I hook up my iPhone 4 to iTunes, all sound is distorted out of my speakers, and I h

  • Facetime picture freezes A LOT

    Hi my mom and I have iphones and we facetime A LOT since i'm away at college. We've always had issues with the picture disconnecting (and only being able to hear eachother through audio) but it's getting worse and now even when the picture is there s

  • Best practice to combine Lookout 6.5 database files?

    I have a years worth of Lookout 6.5 database log files that need to be combined with new ones being created. What is the procedure to make this happen and the old data available for reports?

  • Multi-touch in java

    Hi, I am trying to build a project with multi-touch capabilities using java. I did some research and thought mt4j is promising. But now I find it difficult to design a page with swing radio buttons and buttons etc., I want to use swing components suc