Decline call not working

Having an issue with J4W 9.1 with any 79XX phone when in deskphone mode.  I hit decline, but the phone keeps ringing.  iDivert works fine on the softkey the phone itself.

tpfrankli-
I am assuming you are able to ignore internal calls without a problem? If so, that is because your VM Pilot number is reachable in that partition. I ran into this exact same problem - where I could decline internal, but nothing that came through a gateway. The fix was to add the inside partition (or parition that contains your VM Pilot) to the affected gateways and it began to work. 
Our theory is that when using deskphone control it is not being treated as an iDivert, but as a CTI redirect to the VM Pilot defined by the VM profile. 
I think adding that partition to your gateways will fix you right up. 

Similar Messages

  • Merge call not working in ios7 on Iphone5

    Merge call not working in ios7 on Iphone5 ?

    Same here. We have this call center in our company where after i have added a call to merge i have to push no. 4 and dial from the keypad. This has never been possible in ios but it have been possible to create a contact called "Merge" and add number 4 as it's phone number. Now by merging first my clients call to my collegegue and then to this "Merge" contact it has been dropping me out of line and my client and collegue are merged.
    Now ios 7 wont let me call to this "Merge" contact's number "4"

  • Outgoing calls not working on iphone 4S after upgrading to ios 6.0.1

    outgoing calls not working on iphone 4S after upgrading to ios 6.0.1.
    It always says call back ...
    incoming is working
    i tried number of sim cards from different networks but same issue
    tries resetting network settings but it also didnt worked

    Just counter-check the following settings.
    1. Settings>General>Set Side Swith To: Rotation Lock
    2. Make sure side switch is not in lock position
    3. If necessary do a reset a few more times

  • Calling not working

    I continuously try calling and getting called by my friends who live across the state, only to have the call not work for me. I don't get any ringing or the pop-up window, it just shows me that they are in a call. When I do try to join, it sits there for approximately 30 seconds trying to connect and then kicks me out of the call. I have reset Skype, I have checked for updates; I have the most recent one, I'm up to date. They all have no problem calling with each other but I cannot join or make calls. Oddly enough, there is only one person I can call or get calls from out of our group, but I don't receive a notification unless it's from her. I have tried calling echo and it works every time but not with my friends. Please send help or something to try to fix this problem, it is making Skype unuseable. 

    Glad we found a workaround. On which network and in which country are you roaming? And who is your home network operator?
    This would help Nokia to investigate. And it helps those to find the workaround who find this thread via an search on the Internet.

  • Click to call not working with Firefox 31 in Windo...

    Hello All,
    I have a problem with Click to Call in my new computer.
    Windows 8.1
    Skype 6.20.0.104
    Click to call 7.3.16540.9015
    Firefox 31
    Click to Call not working with Firefox.
    With IE11 it ok.
    When I directly copy the URL "skype:+48xxxxxxxxx?call"  into address field of my Firefox, then automatically opening Skype with only 1 window- contacts, but not opened window with call phone, and not started to call.
    When I do this same in IE11 , Skype opened 2 windows ( contacts and call phone) and start call to phone number.
    I don't know why. because in my second computer ( this same Firefox, Skype, click to call) but Windows 7, Click to Call working with Firefox.
    Please help me.
    Maybe someone have a solution ?
    Best Regards
    Jarek
    ps. Sorry for my english

    Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
    The Beta update channel receives an update twice a week.
    You need to install the current release to switch the update channel to release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.

  • Mac 10.6.8's video calls not working! Please help!

    Reposting the text below because there was no reply to the last message. Ack! Please help. Skype, is there a solution yet? Or even just an explanation and a time frame so we know when we can expect video calls to work again? Thanks! ---------------I have a Mac laptop, version 10.6.8. I have the most updated version of Skype available for my computer, Skype version 6.15. For the past few months, I've been unable to use video chat or file sharing. I can receive some files, but cannot send files. Other people can video chat with me and I can see them, but they can't see me. My built-in camera works just fine for other purposes, so I know it's not an issue with my camera. I've also noticed that a lot of Mac users seem to be having trouble with Skype lately. I've checked my audio/video preferences for Skype and my computer's camera preferences, and everything is as it should be. Does anyone know how to fix this? 
    Thanks in advance for any help!

    See: How to perform a "clean install" of Flash Player in Mac OS X
    In addition to these steps, I recommend, BEFORE emptying the trash:
    Go to: [User]/Library/Preferences (hold the "Option" key when clicking "Go" from the Finder menu to reveal the hidden Library folder)
    Trash the ENTIRE Macromedia folder from there
    Aside from that additional step, follow the rest of the instructions to the letter and you should be back up and running.

  • Skype Click to Call Not Working for Landlines and ...

    Hello,
    I am trying to use Skype Click to Call, but it does not seem to be working. I was able to call contacts using callto://CONTACT_NAME, but the second I try to call any mobile or landline number (I.E. - callto://9731234567), it does not work. Skype will come up, but it will not make the call. I am running on:
    Windows XP - 2002 Version
    4 core Pentium processor (1.7 GHz)
    256 MB of RAM
    Google Chrome
    If anyone could provide any insight or ideas, I would really appreciate it. I have already tried a large number of things to fix this issue. Thank you so much for any help!

    Sounds that you have installed a Firefox Beta release and thus are on the beta update channel, see Help > About.<br />
    The Beta update channel receives an update twice a week.
    You need to install the current release to switch the update channel to release.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 27: http://www.mozilla.org/en-US/firefox/all.html
    If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you lose personal data like bookmarks and passwords from profiles of other Firefox versions.
    Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.

  • Function call not working - why?

    Hmmmm.  I just don't see why this is not working.  I have an application with a new class I just created.  The class loads, but will not call it's own internal function. 
    package com.parkerandkent.components.classic.photogallery {
         import caurina.transitions.Tweener;
         import flash.display.MovieClip;
         import flash.events.Event;
         import flash.events.MouseEvent;
         public class CallTag extends MovieClip {
              trace ("test1");
              init();
              private function init():void {
                   trace ("test2");
                   b_arrow.buttonMode = true;
                   b_arrow.addEventListener(MouseEvent.CLICK, arrowMenuCLICK);
              private function arrowMenuCLICK():void {
    "Test 2" will not fire here.  And I get this error message:
    CallTag.as , Line 10        1180: Call to a possibly undefined method init.

    package com.parkerandkent.components.classic.photogallery {
         import caurina.transitions.Tweener;
         import flash.display.MovieClip;
         import flash.events.Event;
         import flash.events.MouseEvent;
         public class CallTag extends MovieClip {
    function CallTag(){
              trace ("test1");
              init();
              private function init():void {
                   trace ("test2");
                   b_arrow.buttonMode = true;
                   b_arrow.addEventListener(MouseEvent.CLICK, arrowMenuCLICK);
              private function arrowMenuCLICK():void {

  • SIP Call Not Working

    Hello Everyone,
    I have two CME sites connected via P2P. I have configured dial peer for calling between two sites. Calls from one site are working but from other site I am not able to make calls. Anyone can help me with this issue?
    I am attaching debug ccsip all herewith.
    Thanks

    Hi Carlo,
    This is the output of the debug from where calls are not working. There is no output on the other router.
    Log Buffer (6000000 bytes):
    001892: Mar  2 2015 11:44:57.370 IST: %SYS-5-CONFIG_I: Configured from console by TSAL.ADMIN on vty0 (192.168.100.12)
    001893: Mar  2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Calling Number=, Called Number=1039, Peer Info Type=DIALPEER_INFO_SPEECH
    001894: Mar  2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Match Rule=DP_MATCH_DEST; Called Number=1039
    001895: Mar  2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchPeersCore:
       Result=Success(0) after DP_MATCH_DEST
    001896: Mar  2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchSafModulePlugin:
       dialstring=NULL, saf_enabled=0, saf_dndb_lookup=0, dp_result=0
    001897: Mar  2 2015 11:45:08.450 IST: //-1/xxxxxxxxxxxx/DPM/dpMatchPeers:
       Result=SUCCESS(0)
       List of Matched Outgoing Dial-peer(s):
         1: Dial-peer Tag=6
    Thanks

  • Merge call not working

    I tried to initiate a 3 way call using an Apple 5s, and it did not work.  I am traveling in Toronto, could that have something to do with it?

        @DanPetrie
    Let's see what 3 way / Conference calling options are available to you.  Please share more details of what you experienced.  Were you on an existing call, trying to place another call to conference or were you attempting to accept a second incoming call to merge?  Please see more details about Call Conferencing in the Device Manual here: http://bit.ly/1ruLn6H on page 52.  Thanks!
    AnthonyTa_VZW
    Follow us on Twitter @VZWSupport

  • Skype Calls Not Working

    I always used skype and it worked perfectly fine. But about a month ago, calls stopped working. When I tried calling someone it would say Connecting, but the timer would stay at 00:00. Then after the call ending/going to voice mail, it would tell the person that there was a missed call. However, they wouldn't get a notification popping up saying that I was trying to call. Same for me when they tried calling it wouldn't work and I will see that there was a missed call even though I was looking at my screen when they were trying to call. There would be no window popping up asking to accept the call as well. I tried doing stuff like deleting the Db temp files and renaming the skype program folder and it did not help. I need help with this because it is so frustrating. I even tried making new account and it would keep doing this.

    Have you got this question resolved ever since? I've got the same problem with my iphone 5S. I've bought it a month ago as part of a 2 year contract with Orange France. My plan has 2Gb data on 4G. But only when I'm on wifi does any of those work (viber, facetime, skype). Once on data plan, no matter where I am in Paris, I can't hear people answering my facetime/skype/viber calls and they can't hear me either. Even though the status shows 4G (or sometimes 3G). I've tried disabling 4G and forcing 3G, the same. I've got the iphone replaced, then the SIM card replaced, the problem stays. I still  have more than 1Gb left from my data so that's certainly not the problem. All softwares are updated (certainly downloaded, re-installed everything several times, phone factory reset, etc). I pay like 45 euros a month so I can't imagine this would be a 'simple plan' or maybe my VoIP got somehow disabled by mistake? I've been to 5 Orange stores and they sent me away that it must be application problem they don't know what's wrong. As I said, Apple got my iphone even replaced but didn't have more suggestions when it still didn't work. I'm kinda hopeless, doomed to go for 2 years with an iPhone 5S that can't use any audio communication applications from its data plan. Which is ridiculous cause that's one of the main reason I've bought a 5S, I was told this one can do Facetime on data plan too, not just on wifi.

  • Messaging, FaceTime and calling not working

    I am having trouble sending iMessages, using FaceTime and calling only one contact. Each time I send an iMessage it says not delivered, when I try to call using FaceTime it pops up that the contact is not available for FaceTime and when I call the contact it goes to voicemail. Could they have me blocked?

    Hi,
    Have you allowed either app through the MAc Firewall ?
    (System, Preferences > Security > Firewall)
    Are either app allowed though your Router ?
    In fact what exactly do you mean by "Not Working" ?
    For Instance
    Face Time Launched
    Go to the Face Time Menu > Preferecnes
    Is it set to ON ?
    9:29 PM      Sunday; August 21, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • JTOpen: Program Call Not Working

    I can't seem to get the program sample from the following site working from my project within Creator.
    http://www.itjungle.com/mpo/mpo011702-story04.html
    The code works as a stand alone program called from command line. However when I add the same code to my java class it will not work. The code is being accessed from the Application Server. This is the exception that is returned;
    java.security.AccessControlException: access denied (java.lang.RuntimePermission createClassLoader)

    The permission needs to be given to the code that is trying to create a class loader. Permissions are set in the server.policy file for the appserver.
    - Edit <creatordir>//SunAppServer8>//domains/creator/config/server.policy file.
    - Add the line "permission java.lang.RuntimePermission     "createClassLoader";" before the line containing " permission java.lang.RuntimePermission "loadLibrary.*";".
    The above will give the permission to all code; you can restrict the premission by granting permission to only some apps by using 'grant codebase' sections instead of the global grant section...

  • Video Group call not working

    Hello! I have recently purchased a laptop with Windows 8.1 with pre-installed Skype application. When When I video-call a single person, everything is working normally, and I am able to see the other person. However, when making a group call, I am the only one that cannot see neither of the parties, though I am able to hear them. I do have the latest Skype application. Also, I cannot recieve pictures. Where is the problem?
    Solved!
    Go to Solution.

    Hi there, I am having a similar problem.  When I make group video calls (on my PC with Windows 8.1), the people on macs or iphones can only be heard but not seen. And I get a message on my screen that says something like their version doesn't support group video?  But I've done everything the forums says:
    1) they have the latest iPhone and just downloaded Skype which is the newest version (no older versions here)  
    2) I'm the one hosting the call, so they're just joining in (because I know iPhone can't host, but they're supposed to be able to join group video chats).  
    3) I've added their name to my contacts list and dragged their contact into the group call box to initiate the call (so they're not joining in later, they're there at the start of the call).
    4) And we tested prior to the group call to make sure that one-on-one video calling is working.
    5) Everyone else on the call who are on a PC has the group video chat working fine.
    6) Only calling with 3-4 people in a group.
    What am I missing?  Please help.

  • Mac calling not working on yosemite

    i have a mid 2012 macbook pro on the new os x yosemite with iOS 8.1 on the iPhone and hand off works, sms works but calling does not work. it keeps saying call failed. all devices are logged onto the same iCloud account.

    Glad we found a workaround. On which network and in which country are you roaming? And who is your home network operator?
    This would help Nokia to investigate. And it helps those to find the workaround who find this thread via an search on the Internet.

Maybe you are looking for

  • Redownloading Photoshop with an expired email account

    I purchased the student Adobe Photoshop CS4 Extended software while in college using my school email address.  Upon graduating, my account expired and I have no way to access the redownload feature to install Photoshop on my new computer.  I still ha

  • Downloaded my upgrade .....but

    Upload from 3.0 to 4.0 just fine. The 4.3 update (.exe file) won't run?

  • Why won't my movie clip stop playing

    when i press shift + enter it just loops without stopping when i press the first button to launch it

  • MFBF run before updating product cost collector

    Dear Sir, I have done cost run through CK40N and not updated the Product cost collector. So system should stop me doing MFBF (Backflashing). But without update to Product cost collector system is allowing to do MFBF (Backflashing). Can u guide what c

  • Can't access iCloud mails from any location

    Hello, for a couple of days I am not able to access my iCloud ( @me.com ) mails from any location. I've already tried it on Apple Mail, iCloud.com via Mac and PC and Mail.app on iPad 5.0.1. Here are two screenshots: I appreciate any help. Thanks