Default email subject for Adobe Form from Netweaver Guided Procedure

Hi everyone.
When we generate an Adobe form from a Netweaver Guided Procedure, a default subject of "Interactive Form {xxxxxxxx}" is used where xxxxxxxx is the Process ID of the Guided Procedure. Is this default subject configurable? Where can I change it?
If we define a custom email template for the form, the subject of the email becomes our custom subject concatenated with the Process ID. Where is it defined that the Process ID must be included in the email subject?
Thanks,
.. Craig

Hello,
I have no experience regarding the table of pictures, but you could try a workaround if you don´t insist of displaying the images. You could attach the pictures as attachments (you know, the little attachments icon on the left in your Reader). The ABAP coding for this can be found in SE38 FP_* and when you check the descriptions you should be able to find the one working with the attachments.
Would be better than nothing I guess,
Otto

Similar Messages

Where does Acrobat come up with the default email address for a form?

We're testing a form to be distributed for electronic signatures by a variety of clients. I created the original form from a Word document, then added signature fields. I then submitted the form to others, but when they add their signatures and click "Submit" to have the form resent it comes up with another co-worker's name and email address. There's no way to change those fields, and I can't figure out where it is getting the other name and email address. The original document has my name, as does the copy of Acrobat I'm using and the computer that i use to send it. Does Acrobat go to some default manager name somewhere out their in the cloud? Help!

Have you checked the actions of the Submit button? (I know you were the form's creator, but maybe someone helped or the button was borrowed from another pdf?)
If you haven't checked already:
Right click on the Submit button, and click Properties.
On the Action tab, see if there are actions listed (like in the example jpg below)
Select the action, then click Edit and see if an email address is there for you to edit.

Problem with Configuration of GP for Adobe Forms

Hi,
I following the guide 'Configuration of GP for Adobe Forms' (from Configuration of GP for Adobe Forms )
When i try to configure 'Web Service Clients' in the visual administrator:
Configure this parameters:
- Destination URL SLD
- Authentication BASIC
- User
- Password
but the frame with this parameters:
-- System Name
-- WS Name
-- WS Port
don´t show.
I think it is an error in swing because the title 'System Landscape Synchronization' show but the scrollbar stop there.
Features:
Netweaver 04s
Visual administrator 7 SP 9 java version 1.4.2_09
Thank you in advance
with Regards, Mariano

Hi,
please check out this link it might help you
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8a696cea-0c01-0010-d494-9b0b8ce7565f
**********please reward points if the information is helpful to you***************

HT204150 How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact? Or at least change it for the autofill information?

How do I change my default email on the "Me" contact from a Facebook email to my normal email address in the same contact? Or at least change it for the autofill information?
Perfernece for contact to change. Do I just have to dis-associate my contact fromt the facebook account? Is only the autofill changable?

If you allow Facebook to access your contacts and you have the @facebook.com email alias turned on, it will add the @facebook.com email to your contact info, and because it has the fixed label of "email" it overrides every other email address.
They didn't fix this in iOS 8.
There are two ways to remove the @facebook.com email from your contact info:
If you don't need your Facebook friends and their info updating your contacts, go into iOS Settings -> Facebook and turn off access to Contacts.
If you don't use your @facebook.com email address (all it does it forward to the primary email address) you can go into the Facebook app, More -> Settings -> General -> Email -> and uncheck "Use your Facebook email". Removing it from Account Emails does not work, you have to turn it off. Once you do this, go to iOS Settings -> Facebook and turn Contacts off and on again to make it update your info. The @facebook.com address should be removed.

Adobe forms from scratch - Standard programs?

Hi,
I have just begun trying to implement Adobe forms from scratch at my company. Previosly we have used an external printing solution so I can't convert anything. My plan is to create a new output medium and let the users select the new type by themself. But I have a couple of questions:
1. How do I create a new medium (Examples: Print output/Fax/Telex, as found in t-code NACT - Processing routines)
2. I guess there are SAP standard printing programs, interfaces and forms, but I can't find them. I need to be able to print all the usual docs from orders, deliveries and invoices. All I have in NACT are old home-made (Z*) programs so if you know what SAP think we should use now, please let me know!
We have ERP6 ehp4 on netweaver 7 ehp1 and I have created one "Adobe form" myself so I can confirm that it works. but I don't want to invent the wheel twice...
Thanx in advance!
Br Linus Hellsing

Hi Linus,
I was wondering if you had a moment to comment on an opportunity that I am having regarding Adobe forms development efforts?
If so, please read on:
Our offshore team has worked on a development effort to replace Smart Forms PO's and Contracts with Adobe forms. They created new output types for these Adobe forms. In testing I noticed that the only way I can get them to print - is if I go into Print Preview and print -or- use SP01 and click on the .pdf icon and print. In both cases it uses Adobe Acrobat to perform the actually printing.
We cannot seem to get them to print using the normal SAP message utility. Our users would expect to continue to:
1. Use the Messages button while in the PO document - and select the new output type along with Meduim= Printed Output...
2. Then they select Further data button - to specify Send Immediately.
3. Then they use the Communication Method tab and specify the Logical Destination (as LOCL) and click on the Check box for Print immediately.
They get what appears to be an rambling of Adobe error lines followed by many blank pages....
At this point I am not sure if the print program is working correctly - or if the problem is with Adobe Document Services?
Have you ever encountered a situation like this during your Adobe development efforts?
Any suggestions would be appreciated.
Regards,
Steve

Changin iPhoto Default Email Subject Line

Is there anyway to change the default email subject line, currently set as 'x Great iphotos' when using iphoto in conjunction with my email client to some thing else.

Yep it is that file. just replace
email_subject
in the following line with whatever you want as long as its in quotations eg.
make new outgoing message with properties {subject:"photos", visible:true}
I like the comment in the script-maybe Apple's internal bug reporting system needs to be looked at!
-- We have been having problems with inserting images before the signature. There seems to
-- be some sort of bug with attachments. Even iterating the images backwards and inserting
-- the images at the "beginning" doesn't work for more than 1 images. Strange.
-- Anyway, we note the signature here, remove the signature from the message, and then
-- set the message signature back at the bottom.
-- Peter

Need to configure output type for adobe form

Hello All,
I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
I'm little confused, Pls I need your help.
Thanks in advance,
Chandra

Hi,
Just before few weeks we did this task.
Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
2. Then use tcode tcode NACE and select EF as application and click output types button on the application tool bar. Select NEU output type and double click processing routines on left side.
3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
4. For form names we have two options in NACE tcode.
One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
If any queries please post it.

Call XML Schema based Adobe form from ABAP Program

Hi,
I have a scenario where an online Interactive form is designed and its working fine. Now i have a requirement to call the same Adobe form from a report for viewing purpose. Since it is XML Schema based Interface, is it possible to call the same form instead of creating a new one with the same template? Because i tried to call the same Adobe form by passing the values and converting those to XML(By Creating Transformation). Then i converted the XML to XSTRING and passed to the Generated Function Module for Input paramter "/1bcdwb/docxml". This resulted in an error "com.adobe.ProcessingException: com.adobe.Processin".
Please help me out in solving this and check the attachment for code.
Thanks,
Raj

Hi,
outputparams-NODIALOG   = 'X'.
outputparams-PREVIEW     = 'X'.
outputparams-dest = 'LP01'. "give ur printer name.
CALL FUNCTION 'FP_JOB_OPEN'
CHANGING
    ie_outputparams = outputparams
EXCEPTIONS
    cancel          = 1
    usage_error     = 2
    system_error    = 3
    internal_error = 4
    OTHERS          = 5.
and Now call the generated function module
pass the following in docparams
docparams-langu = 'E'.
docparams-country = 'US'.
and finally close the job.
It should work.
Please let me know if u need further details.
Regards,
sasi

Good morning everyone! I would like to ask how can i subscribe for adobe forms central 11.99$ per month. I am currently here in United Arab Emirates. I really need to use this application cause it will benefit me a lot in my work. Thanks!

Good morning everyone! I would like to ask how can i subscribe for adobe forms central 11.99$ per month. I am currently here in United Arab Emirates. I really need to use this application cause it will benefit me a lot in my work. Thanks!

Hi,
OK. Following instructions, I've uninstalled the old Flash Player and installed the right one, and videos are now playing. Thanks for pointing me to the other posts on this site. YouTube and other videos are now playing
Some of the videos still play jerkily (they don't stream evenly). A few stream evenly once they've been allowed to buffer fully. (I think I'm using these terrms correctly.) Is this solely caused by low bandwidth, or is there something—an adjustment of some kind—that I can do with Flash Player to have online videos stream evenly, even from the moment I start them?
As I mentioned, to bypass this uneven streaming while watching online, I download the videos and watch them usually using Quicktime Player 7.6.4. Still, they don't always play evenly, but for the most part do.
I've just tested bandwidth and I'm told:
5.63 Bbps Download speed
0.63 Mbps Upload speep
Rafael

Docs needed for Adobe forms development in ABAP Workbench

Hello Friends,
I need documents on how to develop adobe forms using abap workbench in SAP R/3 system.
Please send the documents to [email protected]
Points will be rewarded.
Regards,
Bruce.

Hi Bruce,
I have emailed you some documents for Adobe forms development in the ABAP workbench.
In addition you can also check the following links.
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/b7/64348655fb46149098d95bdca103d0/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/0f/128841e8231709e10000000a155106/frameset.htm</a>
These are sample WebDynpro Examples you will find in se80
WDR_TEST_ADOBE
WDR_TEST_ADOBE_PDF_ONLY
Hope this helps.

Problem activating simple adobe form from SFP

Hi
I created a simple adobe form from transaction SFP....2 steps ...created interface then form.
the problem is when try to activate the form there are no syntax errors but iam getting a message
1,275 bytes transmitted, code page 0000
Message no. FES032
and the form is still inactive...
any idea why iam getting this error? is configuration from basis not configured properly?
Please advise
Govi

1. Create RFC (ABAP system side) destination through SM59 called as ADS which should of type G
u2022     RFC Destination          : ADS
u2022     Connection Type          :G(HTTP Connection to External services)
u2022     Destination 1               : ADS connection to SID (Java system)
Target System settings:
u2022     Target HOST          : JAVA system Host
u2022     Port               : java system port
u2022     Path prefix          : this defaults(/AdobeDocumentServices/Config?style=rpc)
2. Login to Visual Administration
Navigate to Server  Services  Destinations and select HTTP drop down.
Create the RFC destination as FP_ICF_DATA_<SID>.
Destination Name: FP_ICF_DATA_<SID>
Destination Type: HTTP
Connection settings:
u2022     URL          :http://<hostname>:<ABAP-portno>
u2022     system Id     :--NIL
u2022     client            : ABAP system client no(200 or 300)
u2022     Language     :--NIL
Logon Data:
u2022     Authentication: BASIC
BASIS Authentication:
u2022     Username:ADS_AGENT
u2022     Password:xxxxx
3. Please activate SOAP service:
Login your ABAP System
u2022     Use transaction: SICF  execute and Select default hostselect sap---select bcu2014select-SOAP Select and activate

Call standard adobe form from a WD application

Hi All,
I have a requirement of displaying a standard adobe form from a click of a button in a WDA portal,
I am an ECC developer and have no idea of WD. I created a function module which uses submit statement to invoke the driver program and displays the PDF output, but when this function module is invoked from the portal on the click of button it gives and error FP job open error.
I understand that displaying PDF wont work in this way on portal, so can anyone please guide me the correct procedure on how to achieve this.
I came across this thread
[Regarding adobe form using Webdynpro ABAP|Regarding adobe form using Webdynpro ABAP]
which mentions of feeding the complete PDF document to the UI element as an XSTRING context node bound to the pdfSource property, but the help link provided in the thread is not opening.
Thanks in advance.
Regards,
Kartik

Hi karthick , creat a button in the view and assign a action to it .
inside that action eventhandeler method call the method for prepare_adobe _form for dislay PDF .
method ONACTIONSHOW_ADOBE_FORM .
data : l_pdfstring type xstring.
" Select for print
wd_this->prepare_adobe_forms( importing p_pdf = l_pdfstring ). " coding is given below
" Call print
cl_wd_runtime_services=>attach_file_to_response(
i_filename = 'adobe_form.pdf'
i_content = l_pdfstring
i_mime_type = 'application/pdf'
i_in_new_window = abap_false
i_inplace = abap_false ).
endmethod.
prepare PDF
method prepare_adobe_forms.
data: lv_funcname type funcname.
data: ls_outputparams type sfpoutputparams.
data: ls_formoutput type fpformoutput.
call function 'FP_FUNCTION_MODULE_NAME'
exporting
i_name = 'FP_TEST_DATE'
importing
e_funcname = lv_funcname.
ls_outputparamsu2010nodialog = 'X'. " suppress printer dialog popup
ls_outputparamsu2010getpdf = 'X'. " launch print preview
call function 'FP_JOB_OPEN'
changing
ie_outputparams = ls_outputparams
exceptions
cancel = 1
usage_error = 2
system_error = 3
internal_error = 4
others = 5.
call function lv_funcname
* exporting
* /1bcdwb/docparams = fp_docparams
importing
/1bcdwb/formoutput = ls_formoutput
exceptions
usage_error = 1
system_error = 2
internal_error = 3
others = 4.
call function 'FP_JOB_CLOSE'
exceptions
usage_error = 1
system_error = 2
internal_error = 3
others = 4.
p_pdf = ls_formoutputu2010pdf.
endmethod .
Regards
Chinnaiya P

Can any one tell me step by step guide of Guided procedure for adobe forms.

Hi,
Can any one tell me step by step guide of Guided procedure for adobe forms.Can any one give me docs of that if possible.
My personal id is..
[email protected]
Regards,
Gurprit Bhatia
Message was edited by:
GURPRIT BHATIA
Message was edited by:
GURPRIT BHATIA

hi
Refer these docs
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/43/849b3482206353e10000000a11466f/frameset.htm">Configuration of GP for Adobe Forms</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e99cff7a-0601-0010-dea3-e8166c7a7f20">SAP CAF Application</a>
<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b9ea34c2-0701-0010-e2a2-d8e9cd6d85dc">Configuration for GP</a>
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bc_gp/~form/handler">Limitations and known issues for Adobe forms in GP</a>
\<a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ee8a84ea-0c01-0010-5691-accfb0a172ed">Creating a Form-based Process(Adobe)</a>
Thanks & Regards
Harsimran Kaur

Driver program for ADOBE FORM

Hi experts ,
         Can anyone guide me for writing a driver program for ADOBE forms ( created using SFP transaction) . I have created the form but dont know how to run it using a driver program since i m new to SFP.
       Plz help me.
Message was edited by:
        suchita phulkar

Suchita,
You can check this code.. This is purley to run the ADOBE form, above one is to run a smart form.
*&      Form print_form
*       Subroutine to print the form
FORM print_form .
DATA : l_fmname TYPE funcname,
         l_params TYPE sfpoutputparams,
         l_docparams TYPE sfpdocparams,
         l_formoutput TYPE fpformoutput.
CALL FUNCTION 'FP_FUNCTION_MODULE_NAME'
    EXPORTING
      i_name                    = 'Z_CERT_CONTINU_FORM'
   IMPORTING
     e_funcname                 = l_fmname
*   E_INTERFACE_TYPE           =
* l_params-getpdf = 'X'.
l_params-nodialog = ''.
l_params-preview = 'X'.
CALL FUNCTION 'FP_JOB_OPEN'
    CHANGING
      ie_outputparams = l_params
    EXCEPTIONS
      cancel          = 1
      usage_error     = 2
      system_error    = 3
      internal_error = 4
      OTHERS          = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
l_docparams-langu = 'E'.
CALL FUNCTION l_fmname
    EXPORTING
      /1bcdwb/docparams = l_docparams
      g_regis            = g_regis
      g_date             = g_date
      g_frmname          = g_frmname
      g_comp             = g_comp
    IMPORTING
      /1bcdwb/formoutput = l_formoutput
    EXCEPTIONS
      usage_error        = 1
      system_error       = 2
      internal_error     = 3
      OTHERS             = 4.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'FP_JOB_CLOSE'
* IMPORTING
*   E_RESULT             =
   EXCEPTIONS
     usage_error          = 1
     system_error         = 2
     internal_error       = 3
     OTHERS               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    " print_form
Thanks,
Sreekanth
<i>*-- Please close the post and do not forget to reward if it helps you</i>

Driver program for adobe form error no job started

Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help.

Hi
Iwhen I execute driver program for adobe form the program generates error no job started.
the print dialog box appears but when I pressed print preview button it generates this error no job started.
I don't know why it's happening please help.

Default email subject for Adobe Form from Netweaver Guided Procedure

Similar Messages

Maybe you are looking for