Default GL for Services

Dear SAPians,
I have a scenario from the client, they want to default the GL account for services while creating the PR. I have assigned a GL to val class 3200 in GBB VBR. I have also assigned GL to the service group in transaction OMQW.
Am i missing something?
Let me knw.
Thanks.
Osayed.

>
Osayed Rehman wrote:
> Dear Afshad,
>
> Thank you for your kind support :)...once a S always a S
>
> I know we can do this for NLAG materials, my question is however, whether we can default the GL account for Services while creating a PR.
>
> If you read above i have already carried out the configuration with referene to GBB VBR.
>
> Osayed.
The answer is Yes, as its coming by default on my system. Read the last message in the link, instead of material master you can input it in service master.
I've managed to solve the problem.
I've created a new valution class and assigned the GL Account to the valution class. Thereafter, I assigned the valuation class to the material group and set the valuation class in each of the material code in material master.
Now the GL Account will be defaulted during PR creation.
Edited by: Afshad Irani on Jun 27, 2010 9:23 AM

Similar Messages

  • Default location for service PO

    HI
    We have multiple locations in our system...
    Now i want to make the location default for Service PO so that user dont need to enter it manually...
    I think it can be done but i forgot the way i did...
    so please tell...

    HI Rahul,
    I already set a FMS for one field...
    If i set again FMS with search in "User defined values" in the location field..
    then the previous FMS which was already set with "search in Query"  will get affected right...
    This was happened before where i am not able to set the two FMS with different values i.e search in User Defined values and Search in Query
    AM i right?

  • Default values for service provider in transaction TRIP

    Hello Gurus...
    We are implementing travel management and I have a problem... here's the scenario
    Tha gl account that should be used for a specific trip recepit depends on the following:
    The expense type
    The company specific type of trip
    The Employee grouping for Travel Management
    What we have done so far is :
    create a service provider for every combination of trip_type/employee_grouping
    create entries in V_T706B4 for every valid combination of expense_type/service_provider
    configure transfer to accounting
    With this configuration the gl account is determined correctly. However this way of solving the situation means that the user must enter the service provider for every recepit entered in the expense report. Given that in our particular scenario the service provider depends on data that has been already entered (type of trip) or that "the system should know" (employee grouping), users are not happy about having to enter the service provider.
    ¿Is there a way to assign default values to the service provider, and would it be possible to code/configure somewhere how to set those default values? I tried doing it through the trip schema, but apparently it is not possible to set a default service provider that way. I also tried setting the values in the user exit (b4 assigning trip number) but this doesn't work since the user exit is called after the standard validation. I also tried implementing subroutine USER_EVAL_RECEIPT, but this doesn't seem to work in transaction TRIP.
    Thanks in advance for any help you may provide!
    Juan Ramon

    Hello AP.
    Thogh your suggestion is helpful (I might use profile parameters somewhere else) thre is no parameter for the field I need. In any case It wouldn't have solved the issue completely, since the default value I need depends on both the employee(user) and the type of trip that's selected.

  • Default settings for services

    Hello
    I found the following article:
    http://technet.microsoft.com/en-us/library/cc785922(v=ws.10).aspx
    However, is for Windows 2003.  I'm looking for an identical article for Windows 2008 R2.  Has anyone come across such an article?
    I will need the 2012 later this year, so if anyone happens to know where I could find that one to, it would be great.
    Many thanks
    Ewan.

    This one may help.
    http://www.blackviper.com/service-configurations/black-vipers-windows-server-2008-r2-service-configurations/
    Regards, Dave Patrick ....
    Microsoft Certified Professional
    Microsoft MVP [Windows]
    Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

  • In August installed PE12  on Windows Vista with incorrect Sharing Preference for Email Client. Shows default Adobe Email Service How do I change it to Windows Mail?

    Had PE6 previously to installing PE12 on Windows Vista.  PE 12 installation went OK except for the Sharing Preference for the Email Client. Existing  PE12 client is the default Adobe email service not the correct Windows Mail for Vista. How do I make this change..

    Hi,
    I think that for PSE 12, you may need to switch to Windows Live Mail
    http://www.microsoft.com/en-gb/download/details.aspx?id=29224
    You may find that you then also need the following fix.
    Freeze or error “There is no email program” | Share via email | Elements Organizer | Windows 7
    I think that the problem is that the new versions of PSE do not know where to look for the mail client.
    Brian

  • MM-PUR default scales for condition types for service (ME31K

    Hi,
    We have faced the following problem:
    The business case was, to have default scales for certain condition types for a service for a purchasing contract.
    We didn't find it in SAP, so we wrote an OSS. SAP answered that it's not possible now, nor in the future.
    So we decided to look around in SAP, and found out that it was half possible.
    I've abused the exit USEREXIT_XKOMV_BEWERTEN_INIT of program RV61AFZB.
    In this exit I provide the internal table staffel for program SAPMV13A with the correct information (via ASSIGN ('(SAPMV13A)STAFFEL[]') to <staffel>.)
    In this way, if a user adds a service, this exit will get reached and the scales are filled. If the user then clicks on conditions and then double clicks the condition type with the scales, all the default scales are shown to the user. If you then click on save, the next screen is the service screen, if you then click on save again, all the date is stored in the database. (bit of a work around, but this works)
    However, I can't figure out how to save the scales data, when you only add a service and then push the save button without viewing the conditions. Quite logically actually because I'm skipping two whole screens with pbo and pai modules, in these modules internal converting takes place.
    Has anyone encountered this problem before and how did you solve it then ?
    Alternatively what is the SAP standard way to add pricing condition scales on condition types of a service of a purchasing contract? As you know there is no BAPI yet to change/create a purchasing contract.
    I was thinking, to add the scales by updating the tables directly via ABAP, I know that's not a clean way to do it, although it isn't too risky.
    Kind regards, Rob Dielemans

    Dear Rob,
    Is this solution properly working for you?
    I think my problem is similar: purchasing outline agreement (contract) refuses to apply relevant scale prices in the item line. Always uses the first price - without considering order quantity depencies.
    Regards,
    Tamás
    Edited by: Tamas Szabo on Mar 31, 2009 3:50 PM

  • Default settlement rule with settlement type as FUL for service orders

    Hi Folks,
    Could you please advise me on the below issue?
    Requirement: setting up of default settlement rule with default settlement receiver as u201CCOST CENTREu201D and settlement type as u201CFULu201D for the maintenance orders (Order category u2013 30).
    I was trying to configure the same in transaction KSR3_ORI to assign the strategy to the service order type by clicking u201CNew Entriesu201D system not showing the drop list for the status column which is a mandatory field.
    We have applied the below notes:
    Note 313454 - Info: Default value for settlement type
    Note 851975 - Settlement use automatic generation creates
    Could you please guide us to get the default settlement rule for service orders along with settlement type as u201CFULu201D

    I was also with this problem in 2013 january and only found some information about this, here.
    Our solution was change the Maximum number of distribution rules in Maintain Settlement Profiles to 1, because we wanted the FUL rule and it is always in the first line.
    Now, for curiosity, I was search for another solution and found the SAP note 2028108 that explain that is not possible to change the strategy for PM/CS orders.
    This note was released at 09.06.2014

  • User-exit for default values in service order

    Hi,
    i use EXIT QQMA0025 (EXIT_SAPLIQS0_017) to set some default values by creating
    a service notification.
    Is there some exit or badi to do the same for service orders. I don't want to use TPMUS.
    Regards, Dieter

    I create this thread in SD, because
    i don't get any answers.
    Regards, Dieter

  • Is there any way we can set default value for a Date Attribute to current date in Master Data Services

    Is there any way we can set default value for a Date Attribute to current date in Master Data Services.
    I as well wants to know that is there any posibility to show Calendar control while input data into respective date attributes.
    Thanks.

    Hi Anagha,
    So far i havent found any way to set todays date by default from MMI, but i guess this flow should work as workaroud
    1. Add buisness rule which can set a default value when Date = NULL/Blank
    2.get the entity table ,use -select EntityTable from mdm.tblEntity where Name = '<enter entity name>'
    3.Go to that table and add a after update trigger like
    if uda_<entityid>_<attributeid(Date attribute)> = default value
    update uda_<entityid>_<attributeid(Date attribute)> =getdate() where id = <LastUpdatedRow>
    I will check on this too from my side.
    By the way AFAIK i dont think so calendar control integration is possible .

  • Which folder is the default root for https service (port433) in Lion?

    Which folder is the default root for https service (port433) in Lion?

    You chose the password during the configure script.
    If not, su to the oracle user and do
    sqlplus "/ as sysdba"
    password system
    and it should prompt you for a new system password.
    ~Jer

  • Re: Incorrect Committment Item Defaulting for Services Items

    Purchase orders issued for services based upon material group are defaulting an incorrect commitment item. G/L account is defaulting correctly based upon valuation class assigned to material group. FMDerive contains assignment to derive commitment item from g/l. What is the missing link?
    Update - problem is no longer occuring on purchase order, however problem is occuring on service entry sheet
    Edited by: Cindy Ellis on Jul 23, 2008 9:59 PM
    Update - purchase orders are correct, problem is occuring on the service entry sheets
    Edited by: Cindy Ellis on Jul 24, 2008 7:31 PM
    Original Posting - Purchase orders issued for services based upon material group are defaulting an incorrect commitment item. G/L account is defaulting correctly based upon valuation class assigned to material group. FMDerive contains assignment to derive commitment item from g/l. What is the missing link?

    hi
    check whether this sap notes can help
    1110158 Contract Billing - DP90 not generate Debit Memo Request 08.04.2009
    1130699 DP90 and message "No expenditure items found" 11.01.2008
    1094018 DP90: Error message VPK1 310 even though costs exist 18.09.2007

  • Apparently the default country for an account is US. I want it changed to Netherlands without having to call customer service. In need of assistance please.

    Hi,
    Apparently the default country for an account is US. I want it changed to Netherlands without having to call customer service. In need of assistance please, is there someone from Adobe on this forum who can help me? Or does someone know an email address?
    thanks!
    Arjan de Jong

    Change/Verify Account https://forums.adobe.com/thread/1465499 may help
    -http://helpx.adobe.com/x-productkb/policy-pricing/change-country-associated-with-adobe-id. html

  • OBIEE Presentation Services : Default formatting for numeric fields

    Hello all.
    I need help in setting default formatting for numeric fields in criteria. If a user adds an numeric field, it does not have any formatting associated with it. I want to know how do you set default formatting (for example if user adds sales measure it should appear in default format like $1,000 or even with decimal places).
    Please help.
    Thank you.

    Hi,
    1) We have so many subject areas. If we select "system wide default for this data type", is this change going to reflect in all subject areas.No should do this subject area wise.
    2) Will this effect if we migrate from dev to prod environment.Yes it will effect.
    I hope u will follow this to-
    http://forums.oracle.com/forums/ann.jspa?annID=939 :)
    Regards,
    Srikanth

  • SRM 4.0- How to set the default values for product type (01) only for SC

    The radio button “Service” should not be visible.
    Also for search help (e.g. search for internal products) where a search should only be possible for product type 01 (goods). The system should not display the product type and internally always search for goods only.
    How to set the default values for product type (01) only for SC
    We needs to use Search help BBPH_PRODUCT which having parameter PRODUCT_TYPE
    Here we can set defalut value 01 but it is not correct one since same search help is using several places.
    We need to limit the search help results only for SC.
    Kindly help out me ASAP.

    The easiest way to set defautl values is to edit the batch class.
    Goto the characteiristic and go to update values.
    In here you probably have something like 0 - 100 as a spec range.
    On the next line enter the default value within this range.  At the end of the line, click in the box in the column labelled "D".  This indicates the defautl value for the characteristic.
    If you need to you can do this in the material classification view as well.
    Just to be clear, these values will only show up in the batch record.  You can not have defautl values in resutls recording screens.
    FF

  • How to Set default value for taxonomywebtagging control with terms and nested terms

    Hi,
    I have created taxonomy control in custom aspx page and I am able to select terms but I am trying to setup default value to that control.
    Can anybody let me know how to set the default value for TaxonomyWebTagging control in custom.aspx page with nested terms?
    Any help would be greatly apprecited.
    Control code in aspx page:
    <td>
    <asp:Label runat="server" ID="lblLanguages">Field A: </asp:Label><asp:Label runat="server" ID="rfvlblLanguages" CssClass="errorMsg" ForeColor="Red">*</asp:Label>
    </td>
    <td>
    <Taxonomy:TaxonomyWebTaggingControl ID="term" Width="385px" runat="server" /></td>Mapping metedata code:TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
    //Set the Business Unit Field
    SPSite site = SPContext.Current.Web.Site;
    TermStore termStore = session.TermStores["Managed Metadata Service"];
    Group group = termStore.Groups["GROUPName"];
    TermSet termSet = group.TermSets["TERMSETNAME"];
    Term term = termSet.Terms["TermA"];
    Guid termGuid = term.Id;
    term.SspId.Add(termStore.Id);
    term.TermSetId.Add(termSet.Id);
    term.AllowFillIn = true;
    term.AnchorId = countryGuid;
    term.IsMulti = true;
    Thank you.
    AA.

    Hi,
    According to your description, you want to set default value for TaxonomyWebTaggingControl.
    I have a test in my environment. It could be achieved by setting the Text Property of TaxonomyWebTaggingControl.
    Here is the code snippet:
    TaxonomySession session = new TaxonomySession(SPContext.Current.Site);
    SPSite site = SPContext.Current.Web.Site;
    TermStore termStore = session.TermStores["Managed Metadata Service"];
    Group group = termStore.Groups["GroupA"];
    TermSet termSet = group.TermSets["A"];
    Term term = termSet.Terms["A1"];
    TaxonomyWebTaggingControl1.SspId.Add(termStore.Id);
    TaxonomyWebTaggingControl1.SSPList = termStore.Id.ToString();
    TaxonomyWebTaggingControl1.TermSetId.Add(termSet.Id);
    TaxonomyWebTaggingControl1.TermSetList = termSet.Id.ToString();
    TaxonomyWebTaggingControl1.AllowFillIn = true;
    TaxonomyWebTaggingControl1.IsAddTerms = true;
    TaxonomyWebTaggingControl1.IsMulti = false;
    TaxonomyWebTaggingControl1.Text = string.Format("{0}|{1}", term.Name, term.Id.ToString());
    Here is a detailed article for your reference:
    http://blog.bugrapostaci.com/2010/09/23/taxonomywebtaggingcontrol-sharepoint/
    Feel free to Reply the test result.
    Thanks
    Patrick Liang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Patrick Liang
    TechNet Community Support

Maybe you are looking for