Default Image settings - handling multiple presets?

Default Image Settings allows for presets based upon camera serial number and ISO.
How is ACR handling overlapping presets? Does the addition of choosing the ISO within prefs simply override the noise reduction and leave the remaining presets untouched?
And, ( should be in feature requests ) would it then be feasible to add a pref in the future to make lens correction presets based upon embedded lens data. I realize that zooms often require multiple CA settings but primes can be relatively stable.
thx
pg103 seems to imply that its either serial number or ISO
>Select the appropriate options in the Default Image Settings section of the Camera Raw preferences to specify whether to associate the defaults with a specific cameras serial number or with an ISO setting.

>Default Image Settings allows for presets based upon camera serial number and ISO.
Uh no...it is wrong to consider the per serial/ISO as "presets"...they are "Defaults"...big difference in implication if not concept. The "Defaults" that are set based on ISO/Serial are hard "all in one" defaults that are captured when you make the current settings the default.
Presets can indeed use overlapping presets because you can save out subsettings as presets. That can't be done with Defaults.
As far as the lens corrections thing, expect interesting developments on that front for the next version.

Similar Messages

Defaults, Image Settings, Etc.

Members,
Everyday I am learning a new technique in CS4, but I missed something basic way back in ACR 4.0 and now that ACR 5.0 supports the JPEG I am more confused. I need to know the relationship of the RAW preview and JPEG in the camera and when I change ACR Defaults ( for example after adjusting an image.), and how to use Image Settings, and Custom Settings properly. If I change my camera settings to Vivid, for example, what happens to ACR Defaults? Which takes precedent?
I find the Adobe videos quite instructive and if someone can point me to one in regard to the above, know that I am grateful. Of course a text explanation would, in my thinking, be more personal.
Regards to all,
Charles

Chrlz_B wrote:
If my in-camera settings are irrelevant then what's the point of careful exposure and in-camera histogram settings?
Oh, it's absolutely critical to properly set your exposure–exposure, ISO and White Balance ARE indeed picked up and used by Camera Raw...it's just that all of the other "camera adjustments" are not. However, none of the other camera "tweaks" to your image are real...they're just metadata tags that get picked up by the camera makers' software but are ignored by ACR.
So, your actual ISO and exposure ARE important...those are indeed baked into the raw file. The White-point is picked up and used by default in ACR but you are capable of changing it...but color space, tone curves or other camera adjustments like converting to B&W are strictly done to JPEGs, not raws...

Changing default image tracing settings...

I am doing image tracing - and when placing it into a recorded action, it only does the default tracing settings. Is there a way to adjust these? I cannot seem to find it. Thank you!

You have to save your settings as a preset and use that in your action.
Mylenium

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

How can I set the default print settings of my document as color. I want the default print setting to be color when someone opens a document. similar to duplex print preset is there a color print preset?

Hi,
Try saving your settings as a Preset by clicking the Preset drop down and then select Save Current Settings as a Preset.
Next try changing the settings by selecting the saved preset.
That allow saving the settings for a specific printer, I assume it may also allow selecting these settings for another printer.

Copy Settings to multiple images - STILL A NOT WORKING AFTER MANY VERSIONS!

I have reported the problem of pasting settings to multiple images for many versions and this simple bug is STILL present in LR4!
In develop module, make changes to an image, click Copy button, select settings to copy.
Now, select a range or a number of images to which you want to paste the settings, click Paste button. Guess what? Only the first image gets the settings!
This functionality should work and is even documented in the manual. There are other ways of copying settings but I can never remember how to do this.
Am I doing something wrong or is this a genuine bug that only seems to affect a few people (I did a web search for V3), or do people just not use this function?
Please developers, fix this bug if it really is a bug!

Thanks Dorin for the information.
I guess I am just frustrated that the program does not work the way it is documented. There are two very prominent buttons, Copy & Paste and they don't work as documented or as you would expect them to.
With sync you have to navigate menus to do what one click of the mouse should accomplish. All I want is some acknowledgement from Adobe that this is a bug and for it to be adressed. As a long-time IT person I know this would be VERY easy to fix. If it cannot be fixed then update the documentation.
Oh well, enough said. I still love LR!!!

Copy/Paste Develop Settings for multiple images

I'm trying to update some settings on multiple images. In Develop mode, I start by making the corrections to a single image, and then click the "Copy ..." button. I then select multiple images in the Filmstrip and click "Paste". This works just fine, but only on the 1st image/highlighted image, and not the whole selection. Am I doing something wrong here? Shouldn't I be able to update multiple images, at once, like a batch process?
Thanks in advance.

Hi Lee Jay
How do you know this is on purpose? It seems like a bug to me.
See this thread: http://forums.adobe.com/message/2951457
If your reasoning was correct, how come the settings do paste to the entire target selection and not just the active image when the toggle in the lower right hand side of the screen is switched to Auto Sync?
Would love to hear more of your insight, because this is really confusing me.
Best
Adam

Lightroom 2.0 Apply multiple presets to selected images

Lightroom 2.0, Windows XP or Vista
Is it possible to apply multiple presets, e.g. General - auto tone and General - punch to a selected range of images in Library or Develop Mode?
What are the steps to do this?
Thanks in advance,

I'll try to clarify my question regarding presets.
1. Can I somehow apply more than one preset to images during Import?
2. Can I select a group of images, in either the Library or Develop mode, and apply a preset to the entire selection with one or 2 clicks of the mouse. I'd like to avoid clicking on each image to apply the preset.
I'm not concerned that the multiple presets may be additive. In fact that is exactly what I am trying to accomplish.
Thanks much for your patience, I'm a newbie.

Sharing default develop settings in LR2

I have set up a bunch of default develop settings per camera model and ISO on my laptop. I would like to share these settings with my desktop. Where do I find the settings files?
Thanks
Nick

If Auto Sync is enabled and more than one image selected, any editing done to one of the photos will be done simultaneously to all the selected photos. If only a single photo is selected, it will be the only one affected. Thus, moving to a new photo that was not selected together with the previous one it will open with the default settings. Auto Sync can be enabled when multiple photos are selected either from the Settings menu or by raising the toggle switch on the Sync button at the bottom of the right-side Develop panel.
"Recently, LR sometimes opens with the settings I used in the last session, even though I have closed LR in the interim."
This is as it should be. LR should always return to the editing done in an earlier session because every edit is immediately recorded and saved in the catalog database and the old edits are reapplied to the image preview every time it is opened

Nokia N8 Image Settings

Hi All
Can anyone help me understand why there are multiple camera options provided under Image Settings in Nokia N8? When you go to Image Settings, you will see an option "Capture Tone" with "Camera 1" as default. There are 4 options available here to choose from. So if anyone has any details about it, can you please help me understand?
Thanks,
manishk1403
Solved!
Go to Solution.

This is nothing to do with your photos, it just refers to the sound that is played when you take a photo.

Any way to override default printer settings into a PDF

Hi -- I work for a large organization that has lots of computers and printers and prints a lot of forms and documents. We are moving towards more digitization of documents and records including printing forms as needed as opposed to having large sets of forms onhand. This should save us a lot of time and money once complete as these forms often change and the old process would be to then trash much of these documents and re-print for just one change. The majority of our printers do have letter & legal trays as well as duplex support, however due to the vast number of users the default printer settings tied to each user and/or computer may be slightly different. While standardizing all the printer settings across all users/computers would be one solution, we don't anticipate doing this as depending on the job peformed the different settings may be more preferable / advantageous for that user.
As such the other solution I can think of is to hardcode the specific printer settings needed to correctly print a large document into that PDF file which may differ from that computer's print settings. For example, the default computer print settings may be to print on just 1 side but duplex would be encoded / scripted directly into the PDF so IRREGARDLESS of the computer/printer settings this document would always print duplexed.
Is there anyway to do this? I would need to do more than just duplexing -- ie some form sets would need to be both duplexed and 'fit to printable area' whereas some would need to be only on one page and 'shrunk to printable area', etc, etc. Our current practice is to insert a 1 page coversheet at the front of each document with the printer settings that need to be used for that form set, however this has been difficult for some users to do and has caused unnecessary time with our IT troubleshooting form printing.
-Brandon

Hi Brandon,
You can use the Print Presets in Acrobat for that purpose. Please follow the steps below:
1. Open the PDF in Acrobat
2. Open Document Properties dialog (using Ctrl + D)
3. Select the "Advanced" tab
4. In the "Print dialog Presets" section, you can choose DuplexMode as well as Page Scaling for this document.
Please let us know if this works for you
Thanks,
-Shilpi

What are the recommended settings for multiple iPhones and iPads in the same family? I don't want my family members contacts in mine...or them receiving texts that are intended just for me. Help!

I don't want my wife's or children's contact information in my contacts during syncing...or them receiving texts that are intended or me. Can someone please tell me how they handle multiple family members settings in regard to emails, iCloud, and iTunes? Does each phone have a separate computer login, iTunes account or iCloud accounts? Help!

Yes, set them up with their own Apple IDs:
http://appleid.apple.com
An Apple ID may have been entered in the following places:
Settings > iCloud > Account
Settings > Messages > Send & Receive
Settings > FaceTime
Settings > iTunes & App Stores

How to handle multiple exception types in JSF 2?

I'm trying to handle multiple exception types in JSF2, including a default error page for any unexpected exception types. The problems I'm having are:
1) ViewExpiredException is handled only when no generic exception handler is specified
2) "Regular" exceptions like NullPointerException are never handled
My managed bean:
@Named
@SessionScoped
public class MyController implements Serializable {
/* A method that does nothing */
public void doNothing() {
    //do nothing
/* Generate a null pointer exception on purpose */
public void generateNpe() throws NullPointerException {
    Object x = null;
    x.toString();
My test page to generate the exception:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core">
<h:head>
    <title>Test page</title>
</h:head>
<h:body>
    <h:form>
        <h:commandButton id="button1" value="do nothing" action="#{myController.doNothing}" />
        <h:commandButton id="button2" value="generate NPE" action="#{myController.generateNpe}" />
    </h:form>
</h:body>
</html>
My web.xml:

<error-page>
    <exception-type>java.lang.NullPointerException</exception-type>
    <location>/error/error003.jsf</location>
</error-page>

<error-page>
    <exception-type>javax.faces.application.ViewExpiredException</exception-type>
    <location>/error/error002.jsf</location>
</error-page>

<error-page>
    <exception-type>java.lang.Exception</exception-type>
    <location>/error/error001.jsf</location>
</error-page>My questions are as follows:
1) How can we handle "regular" java exceptions like NPE?
2) How can we define a catch-all for unexpected exception types, while still respecting specific exception handlers for VEE, etc?
Thanks,
Benjamin

Is your data model right? If you are adding in one and deleting in another it sounds to me more like a process that an entity, in which case you may revisit your data model and simplify it, add in a session bean with the process method to co-ordinate between the two.
However, if you want to map multiple different tables within a single entity bean it is possible and just part of the mapping. How you actualyl specify it depends on which implementation you are working with.
Cheers,
Peter.

How to handle multiple site to site IPsec vpn on ASA, any best practice to to manage multiple ipsec vpn configrations

how to handle multiple site to site IPsec vpn on ASA, any best practice to to manage multiple ipsec vpn configurations
before ver 8.3 and after version 8.3 ...8.4.. 9 versions..

Hi,
To my understanding you should be able to attach the same cryptomap to the other "outside" interface or perhaps alternatively create a new crypto map that you attach only to your new "outside" interface.
Also I think you will probably need to route the remote peer ip of the VPN connection towards the gateway IP address of that new "outside" and also the remote network found behind the VPN connection.
If you attempt to use VPN Client connection instead of L2L VPN connection with the new "outside" interface then you will run into routing problems as naturally you can have 2 default routes active at the sametime (default route would be required on the new "outside" interface if VPN Client was used since you DONT KNOW where the VPN Clients are connecting to your ASA)
Hope this helps
- Jouni

How to handle multiple requests to the same servlet at one time?

Hi,
I am new to Servlets. I have doubt regarding ... Handling multiple requests to a servlet at a time.
If we send a single request to a servlet, as know that group of objects such as servlet, servletContext, servletConfig, request, response and etc are created in the server, And if 1000's of requests are sent to a same servlet at a time, and if server memory capacity is less, then 1000's of objects are created in a server which would be heavy burden to Server. How to handle the application and development in such situation?
Kind regards,
veerendra

Hi veerendra reddy ,
By default any web server can will have a thread pool to handle client req's.
In your point also heavy burden to server you are telling that depends on this.
we can configure this min & max size of this thread pool.
by default it will be 0-1000 for tomcat server.
I am not sure in which file this configuration will be.
But I hope in server.xml or some xml file consists this info.
If You what you can edit accordingly. to overcome your heavy burden to server.
Thanks & Regards
Nagendra

Dynamic image showing default image instead of requested image

I'm using CR4E v2.0 to incorporate reports into my application which is built into an ear file and deployed with Jboss 4.2.2 at the moment. I have an image in my report that I am trying to set dynamically from a URL in a database, but when the report is run only the default image shows up. The URL in the database for the logo is http://localhost:8087/module_Reporting/Logo.gif and I verified that exact string is being returned to the report, but the image is not changing from the default placeholder.
The formula for the graphic location is:
HdrPictureLogoClient : Graphic Location
// Return values: Any string value.
If Not IsNull({REPORT_PARAMETER_FACT.LOGO_URL_PATH})
Then {REPORT_PARAMETER_FACT.LOGO_URL_PATH}
Else "";
I'm using a com.crystaldecisions.report.web.viewer.CrystalReportViewer in my jsp page to display the report and this is the part of the page that handles the viewer
CrystalReportViewer crystalReportPageViewer = new CrystalReportViewer();
// If the report is not saved in the session you just keep getting prompted for parameters
Object reportSource = session.getAttribute("ReportSource");
if (reportSource == null)
     reportSource = clientDoc.getReportSource();
     session.setAttribute("ReportSource", reportSource);
//     set the reportsource property of the viewer
crystalReportPageViewer.setReportSource(reportSource);
// setting the optoins in the Crystal Report toolbar
crystalReportPageViewer.setDisplayGroupTree(false);
crystalReportPageViewer.setHasToggleGroupTreeButton(false);
crystalReportPageViewer.setHasSearchButton(false);
crystalReportPageViewer.setHasRefreshButton(false);
crystalReportPageViewer.processHttpRequest(request, response, application, null);
The viewer is contained in an iFrame and is disposed of in the containing jsp.
Am I missing something? Any help would be greatly appreciated!

Thank you very much for your reply, but I am not trying to add an image into the report at run time, I am trying to change the source of the image. There is an image in the report as a place holder (called HdrPictureLogoClient) and the code that handles the source of the image is in the .rpt file also as this formula:
HdrPictureLogoClient : Graphic Location
// Return values: Any string value.
If Not IsNull({REPORT_PARAMETER_FACT.LOGO_URL_PATH})
Then {REPORT_PARAMETER_FACT.LOGO_URL_PATH}
Else "";
{/code}
I have discovered that it works just fine with a file path name like C:\logo.png in the database but it does not work with my web URL.
I just find it extra interesting because when the report was originally created in a Crystal Reports Project in myEclipse and deployed as an expanded war directly to jboss running in myEclipse it worked fine, but now that it is being incorporated into an EJB project which is built into an ear file that is deployed in a jboss service running outside of myEclipse it no longer works.

Default Image settings - handling multiple presets?

Similar Messages

Maybe you are looking for