Default service(application:cisco) not available from CIPC

I search to have more informations on Default service of CUCM because I cannot reach them for my CIPC and if the problem is a network problem I will need to know the port
Best regards,.

Thanks for your response Ram
If this is a manual step (which I believe it is), this is not something I did when I originally provisioned the MMS.
But I have tried it, and still, the Terms Sets are not available when I go to Site Settings > Term Store Management
Just to confirm what I just attempted:
Central Admin > Application Management > Manage Service Applications > %ManagedMetaDataService% > Permissions
Under Connection Permissions, I added the service account which is the identity for the Web Application and gave it
'Full Access to Term Store'
Is there an additional step I missed? I have looked at the SQL permisisons as they all seem fine.

Similar Messages

IOS 12.4(15)XW not available from Cisco Web site

Can anyone please tell me why this version is not available from Cisco Web site as I am trying to download it to test on a cisco 2851 series router .The documnet below in page 7 & 10 describe the requirement for this version. What is the replacement version for this if that is not available?

Well, maybe I am missing something but I do not see a 12.4(15)XW release on CCO for the 2851 platform. I see references to it in documentation but I don't see actual release notes or a download link. So, where exactly did you see this particular version for this platform?
Based on the PDF provided by the OP I think he is trying to add a fax module. In the PDF it is stated a few times that you can use 12.4(15)XW or 12.4(20)T. What this basically means is that these are minimum IOS version levels that you need to use that module. You would not want to run the minimum in most cases because software defects are abundant and seem to be endless. IOS release trains are somewhat over complicated in my opinion but here is my quick take. The XW is a early deployment release. These releases are "one offs". Usually added to incorporate a new piece of hardware. Sometime after these releases come out (again, to get the product to market) the code is incorporated in a T-train (in this case, 12.4(20)T). The idea is that the T-train code is used to introduce features/hardware/etc. that will be rolled into the next main-line release (in our world that is 15.0).
Back to your issue. I can't find 12.4(15)XW but apparently p.bevilacqua has been able to find it. Maybe he would be willing to provide the link. If that doesn't pan out, I suggest that you look at releases after 12.4(20)T (including the latest service release for 12.4(20)T). They go up to 12.4(24)T. T-trains are touchy so you have to do your research and testing. I have had decent success with 12.4(20)T until recently (MGCP and T.38 fax, no joy). I have also used 12.4(24)T with OK success thus far. I know that p. bevilacqua doesn't like the 12.4T train "because its buggy". My opinion is all of this software is buggy. You have to identify the minimum release that will work with your hardware. Go to the latest minor/service release and research the bug toolkit. Oh, and always test.
OK. Down the rabbit hole I go.
HTH.
Regards,
Bill
Please remember to rate helpful posts.

I purchased iphone 4 from UAE and activated and using in India, but FaceTime application is not available. how to get FaceTime ?

I purchased iphone 4 in UAE and activated and using in India. But Facetime application is not available. How do i get it?

You don't. Facetime is not available on UAE iPhones, regardless of where activated or used.

Error "Object 'DM' (APCO) of type 'Application' is not available in version 'A'" while transporting process chain to production system.

Hi Gurus,
Whenever I try to transport a process chain ZFI_0FIGL_C10 from dev. to qua. & prod. the error “Object 'DM' (APCO) of type 'Application' is not available in version 'A'” is displayed in the end of creating transport package.
The process chain was created to load data to 0figl_c10 and it works all right on all systems (dev. qua. prod.).
The process chain contains processes for:
- starting the process chain
- executing infopackage (for loading data to 0figl_o10),
- ACR (activate data in 0figl_o10)
- delete index 0figl_c10
- DTP loading data from 0figl_o14 to 0figl_c10
- executing infopackage 80FIGL_O10
- creating index in 0figl_c10
- building DB statistics
- rolling up aggregates in 0figl_c10
- deleting of requests from the changelog 0figl_o10
- deleting of requests from PSA (0fi_gl_10)
How to find what cause that error.
Regards,
Leszek

Hi,
A SAP consultant told me to ignore that error.
Indeed, after creating transport with some new process chains (again I was informed about that error "APCO ...") and transporting it to production everything works all right.
The problem is described in sap note: 883745.
Regards, Leszek

Exception "algorithm ARC4 is not available from Provider Cryptix "

hi all
i am developing the application in which i am using two encryption/decryption algorithms one is "RC4" and second is "AES(256 bit key)".
1.first i am taking the credit card number from database which is in
the encrypted format using 'RC4".
2.After taking the Credit card number from database i am decrypting them using RC4.
3. After decrypting them i am encrypting them using "AES(256 bit key") and putting the paymentid and encrypted credit card number in HashMap.
For that i have written following classes
RC4EncMemory.java ( which is taking encrypted credit card number from database ,decrypting them using "RC4" and then encrypting them using "AES")
import java.security.GeneralSecurityException;
import java.security.Security;
import java.sql.*;
import java.util.*;
import java.util.HashMap;
import javax.crypto.SecretKey;
import cryptix.jce.provider.key.RawSecretKey;
import cryptix.provider.Cryptix;
public class RC4EncMemory
     DbAccess db=null;
     RC4EncMemory crypt=null;
     PreparedStatement pstmt=null;
     ResultSet rs=null;
     EncryptionPerformance per=null;
     AESEccryption aes=null;
     private String originalCCnumber=null;
     private int paymantid;
     private byte[] b;
     private byte[] aesencrypted;
     public RC4EncMemory()
     {db=new DbAccess();}
     public void selectAllCCNumber()
          HashMap allccnumber=new HashMap(1000);
          String qry =DbAccess.getPropertyValue("cedera.ccnumber.selectccnumberFromPayment");
          System.out.println(qry);
          try
          {rs=db.getResultSet(qry);
          if(rs!=null)
          {     crypt=getInstance();
               while(rs.next())
                    System.out.println("In while");
                    paymantid=rs.getInt("paymentid");
                    b=rs.getBytes("ccnumber");
                    System.out.println("paymantid >>> " + paymantid);
                    originalCCnumber=DecryptCCNumber(b);
                    Security.removeProvider("RC4");
                    System.out.println("decrypted original >>> " + originalCCnumber);
                    aesencrypted=getAESEncryption(originalCCnumber);
                    //allccnumber.put(new Integer(paymantid),new String(originalCCnumber));
               Set key=allccnumber.keySet();
               Iterator i=key.iterator();
               while(i.hasNext())
               {System.out.println(" Payment id from HashMap " +(Integer)i.next());
               System.out.println("Size of the HashMap: >>" + allccnumber.size());
          else
               System.out.println("empty");
          allccnumber.clear();
          }catch(SQLException exp)
                         System.out.println("Exception in SQL" + exp);
                    finally
                         try{          rs.close();
                                   pstmt.close();
                                   db.conn.close();
                         }catch(Exception er){}
     public String DecryptCCNumber(byte[] encryptedCCNumber)
          {     String decrypted=null;
               if(encryptedCCNumber!=null)
               {decrypted = decrypt(encryptedCCNumber);
               return decrypted;
     public String decrypt(byte data[])
          if(data == null || data.length == 0)
          return null;
          try
               xjava.security.Cipher cipher = xjava.security.Cipher.getInstance("RC4", "Cryptix");
               cipher.initDecrypt(rsaKey);
               byte out[] = cipher.crypt(data);
               return new String(out);
          catch(GeneralSecurityException se)
          { System.out.println("SecurityException in decrypt method: " + se);
          return null;
     public static synchronized RC4EncMemory getInstance()
          if(_rc4decryption == null)
               Security.addProvider(new Cryptix());
               _rc4decryption = new RC4EncMemory();
               makeRC4Key();
          return _rc4decryption;
private static void makeRC4Key()
{          String seed = "CvMjSpVrGsTnAj";
          rsaKey = new RawSecretKey("RC4", seed.getBytes());
public byte[] getAESEncryption(String originalCCNumber)
{     aes=AESEccryption.getInstance();
     return aes.encrypt(originalCCNumber);
public static void main(String args[])
     RC4EncMemory mem1=new RC4EncMemory();
     mem1.selectAllCCNumber();
     private static SecretKey rsaKey = null;
     private static RC4EncMemory _rc4decryption = null;
In the above programs i am getting the output as follows
output:-
in while
paymantid >>> 3338157
decrypted original >>> 5856373015065936
inside encrypt method
Original Data----->5856373015065936
Encrypted Data----->[B@3cc0bc
after encryption of data
In while
paymantid >>> 3338169
SecurityException in decrypt method: java.security.NoSuchAlgorithmException: algorithm ARC4 is not available from provider Cryptix
decrypted original >>> null
In while
paymantid >>> 3338290
SecurityException in decrypt method: java.security.NoSuchAlgorithmException: algorithm ARC4 is not available from provider Cryptix
decrypted original >>> null
my program is able to decrypt the only first credit card numbers using RC4 and then encrypt it using AES(as shown in bold above) but it is not able decrypt the rest of the credit card number from the database using "RC4" and it is throwing above exception regarding the "RC4" algorithm .
can anybody tell me what is reason behind this exception? my guess is the we cann't use the two providers simultaneously.
please anybody help me
AESEccryption.java(which helps to encrypt the credit card number in AES using encrypt method )
import java.security.GeneralSecurityException;
import java.security.Security;
import java.sql.*;
import javax.crypto.spec.SecretKeySpec;
import org.bouncycastle.jce.provider.BouncyCastleProvider;
import cryptix.provider.Cryptix;
public class AESEccryption
     AESEccryption cryptAES=null;
     AESEccryption cryptAES1=null;
     public AESEccryption(){}
     public static synchronized AESEccryption getInstance()
          {     if(_aesEncryption == null)
                    Security.insertProviderAt(new BouncyCastleProvider(),3);
                    //Security.addProvider(new BouncyCastleProvider());
                    //Security.addProvider(new Cryptix());
                    _aesEncryption = new AESEccryption();
                    makeAESKey();
               return _aesEncryption;
     private static void makeAESKey()
               String seed = "FFF3454D1E9CCDE00101010101010101";
               int length=seed.length();
               if(length!=32)
               {     System.out.println("Key size must be 32 characters only");
                    System.exit(0);
               skeySpec = new SecretKeySpec(seed.getBytes(),0,32,"AES");
public byte[] encrypt(String data)
     {     if(data == null)
          return null;
          try
          {     System.out.println("inside encrypt method");
               javax.crypto.Cipher cipher = javax.crypto.Cipher.getInstance("AES");
               cipher.init(javax.crypto.Cipher.ENCRYPT_MODE,skeySpec);
               byte out[] = cipher.doFinal(data.getBytes());
               return out;
          catch(GeneralSecurityException se)
               System.out.println("SecurityException: " + se);
          return null;
     public static void main(String args[])throws Exception
     {     AESEccryption aesenc=new AESEccryption();
          aesenc.selectAllCCNumber();
          if(flag)
               System.out.println("Flag " + flag);
     private static SecretKeySpec skeySpec = null;
     private static AESEccryption _aesEncryption = null;
Regards
Pandurang
Message was edited by:
andylimp12
Message was edited by:
andylimp12
Message was edited by:
andylimp12

Hi Nith,
Previously I have changed the document dispostal time out to 1 year but the error still occurs.
Now I change the document inline size from 64 KB to 27 MB (estimated max document size) and see how the LCES behaves.
I suspect if document size is larger than document inline size then LCES will write to some temp file. After that, user does not process the task for a long time, e.g. 3 days. And during the 3 days, the unix system/ websphere auto clear the temp file. After 3 days when user accesses the task again, LCES will complain "document is not in sending server side any more" ....
I refer to : http://blogs.adobe.com/livecycle/2008/10/livecycle_tuning_knob_default.html
For the Document sweep interval, I think, it relates Watch Folder, not this error so I don't change it.
Regards,
Anh

I just noted that the FormsCentral service subscription is not available in Hong Kong. When will it be available?

I just noted that the FormsCentral service subscription is not available in Hong Kong. When will it be available?

You need to be in a country to use its store, so unless you are in the US with a US billing address on your account then you can't buy from the US store - you can only use the South African store. You can try requesting that the song be added to the South African store, but unless the rights-holder agrees to it then Appl won't be able to sell it there : http://www.apple.com/feedback/itunes.html

HT204266 I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the di

I live in China, have Dutch nationality, and no US address or Credit Card; how can I have access to products from the US iTunes store, in particular music, when such items are not available from the China iTunes store? In general, what are the differences between countries' iTunes offerings? Does one really need an address and a credit card for any country to be able to access that countries iTunes store? Why these restrictions?

You cannot.
You cannot use another countrys itunes store.
You must be physically locates inside the borders of a country to use that countrys itunes store and a credit card issued in that country with a valid billing address in that country.
The owners of the distribution rights of movies/music/etc differ by country. These distributors decide who can sell their content in that country.
Buy from another source if your countrys itunes store does not carry somehting that you want.

I have edit access to someone else's calendar. In iCloud i can add an event to this calender. In My calendar on my Mac I can see the calendar in the list, but when I try to add an event to this calendar, it is not avail from the list in event to select

I have edit access to someone else's calendar. In iCloud i can add an event to this calender. In My calendar on my Mac I can see the calendar in the list, but when I try to add an event to this calendar, it is not avail from the list in event to select. Any help appreciated. Thanks

Hi Chris,
You can't get rid of an alert. The least you can have is one that says "none".
Nevermind, I see you learned how to edit the event.

SP2013 Workflow Service Application is not showing up only WF Service App proxy but the WF is working...

I configured Sharepoint Workflow Manager 1.0 in Sharepoint 2013 App Server running under Windows 2012 R2. The Workflow manager is working properly - I tested using Sharepoint Designer and Sharepiont Workflow 2013 is listed. But under Service Applications,
only Workflow Service Application Proxy shows up NO Workflow Service Application.
I followed the troubleshooting steps on this - I have re-registered WF many times but still only proxy is coming up.
http://blogs.msdn.com/b/laleh/archive/2014/09/03/sharepoint-2013-workflow-troublehsooting.aspx
I also run IPConfig /FlushDNS, rebooted App and WFE servers.
Any reason why WF Service Application is not showing up? Any resolution to have WF Service App show up?

Hi John,
I recommend to click Configuration Wizards in the Quick Launch of Central Administration site and then click Launch the Farm Configuration Wizard.
And then make sure that the Workflow Service Application is selected and then click Next. (You can uncheck the other service applications if you do not need them)
After that, the Workflow Service Application will show up.
Best regards.
Victoria
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

My Canon MX310 Series Printer failed as the software "is currently not available from the Software Update Server"? What is the matter with Apple OSX Mountain Lion?

Mountain Lion stopped working with our Canon MX310 Printer? Why is the software not available from the Software Update Server?

The printer and ICA scanner driver is available from Apple. There is probably some other reason why you cannot get the drivers.
You can also get the drivers from Canon.
But reading your post it sounds like you were printing to the MX310 and recently it has stopped printing. Is this the case?

Why is the documentary series Bomb Patrol Afghanistan not available from the Australian iTunes store?

Why is the documentary series Bomb Patrol Afghanistan not available from the Australian iTunes store?

Because it is the producer's decision where they want their items to be available. You can request for it if you want to.
http://www.apple.com/feedback/itunes.html

All SYFY online on demand has error "Content not available from this domain"

I keep getting an error on any SYFY online on demand shows which says "Content not available from this domain." This applies to any show from SYFY that I click on to test. Other channels don't have that error.

Hi,
Thanks for bringing this issue. Yes, the message should be SEVERE. This will be fixed.
You may also want to subscribe to [email protected] and bring up any issues, enhancements.
Regards,
Deepak

Valid installation itunes pkg, is not available from network resource, what ca I do?

I have been tryng unsuccessfully to install Itunes. I keep getting the msg. that a valid installation pkg. is not available from its network resourse. I have windows vista. Sometimes it says missing .dll files. What can I do to correct this? My Itunes worked perfectly until I was asked to upgrade it 2 weeks ago. Now nothing works with anything else.

See TS3704: "The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows.
tt2

TS1702 I can not get the 12 days of Christmas to work. The app loads but it says it is not available from the Canadian store at this time

I can not get the 12 days of Christmas to let me get the free gift. I restarted my iPad, I reloaded the app, my iTunes is a Canadian address . The error I get is " it is not available from the Canadian store at this time"

Hi,
See this thread:
https://discussions.apple.com/message/20681369#20681369
Biti

The interchange contained a malformed ISA or the Service schema was not available, it is being rejected completely

Hi All,
I am new in EDI processing in BizTalk. Below is my configuration for EDI.
             I have a text file of EDI 834 data. I need to generate the xml msg of the edi txt file.
             Added a EDI 834 schema(only one schema).
             Created two party with validation namespace.
             Added a peceive pipeline with dis assembler component as EDI Disassembler(I did not set any property here)
             Deployed and created a receive location as .txt file and seted filter as bts.ReceiveProtName to send port.
Getting the below error:
The interchange contained a malformed ISA or the Service schema was not available, it is being rejected completely
Plz help me to resolve it
Thanks in advance.
Uttam
Thanks UK

I resolved it by work around.
1. On BizTalk part, I have created an Aggrement for Sender and Receiver.
2. The ISA6(Sender Id) and ISA8(Receiver Id) field need to be 15 characters (recomended including space).
Thanks UK

Default service(application:cisco) not available from CIPC

Similar Messages

Maybe you are looking for