Default Standard Text Key or Standard Text to first Operation of Order

I would like to have a standard text key or standard text defaulted for the first operation of an order created via IW31 of certain order type.
For example we have an order type called CORR for corrective orders.  When ever there is a break fix, the user would create a CORR order via IW31.  When this order type is used I want the first operation to have a predefined Standard text key defaulted.  In this case we was our first operation to have a safety message and precautions listed.
This would work similar to a planned order that calls from a task list and has text in the task list.
I did some review and testing of the "Assign Standard Texts for Short Messages to Order Types", but as I understand it, this only works for sending message and not including text on the operation.
Is what I want to do possible?  Or would it make more sense to use an exit like IWO10020, Maintenance order: Automatically include task list .  I guess I could create a general task list and use that in this exit for all CORR order types.
Edited by: Darrell Dorsey on May 25, 2010 10:26 AM
Edited by: Darrell Dorsey on May 25, 2010 10:30 AM

For the scenario that you are referring to, i believe this would be the option that would be flexible. Yes, you will have to little bit of custom development for this  and i don't see any standard functionality to default the standard text on the first operation for specific order types. You should be able to attach a task list where its planning plant differs with that of the Order plant.
There are much more simpler options available, if you are open to using a  different work center(You could default the Standard text key on the work center), if you are open to create a separate transaction for this order type (you could default the Standard text by creating a transaction variant through SHDO), If you are using GuiXT widely in your organization you could write a small simple script to default the Standard text for this order type.
Regards
Narasimhan

Similar Messages

  • How to use Standard Text Key in maintenance order header long text?

    Dear All,
    I have created a standard text key using transaction CA10 and I want to use this in maintenance order header long text. Is there any way to select any standard text key in maintenance order header long text?
    Regards & Thanks,
    Saif

    Hi
    To use standard texts, perform the following six steps:
    Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
    You can enter standard text keys in this screen or in a detail screen for the relevant operation.
    Enter a standard text key in the appropriate field and press ENTER .
    If the text is longer that the short text line available, the field Text is selected for that operation.
    Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
    The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
    Check the standard text and change it if necessary.
    Save the final version of the text and return to the previous screen with Goto--> Back.
    Save the maintenance order.
    Standard texts are created for your system by your system administrator using the Customizing function.
    Regards
    Makarand Gurjar

  • How to get F4 help for Standard Text Key of a operation based on Order type

    Hi Experts,
      How to get F4 help for Standard Text Key (STK) of a operation based on Order type entered in selection screen. The F4 help should give the STK of related order type. At the same time the F4 help for Task Types based on Notification type. How to acheive the above two. Please provide the table names or any search help name if exists or Function modules...
    Thanks in Advance.
    Regads,
    Bujji

    Hi Guys,
       Any help on this...
    Regards,
    Bujji
    Edited by: Bujji on Dec 22, 2008 12:42 PM
    Edited by: Bujji on Jan 5, 2009 2:00 PM

  • Standard Text Key in Routings

    Hi,
      Can we load Standard Text key into SAP. I want to use these standard Text key while creating Routings.
    If yes,  what is the Procedure.
    Thanks,
    Kishore

    The problem may be in the joining..
    In MARC and MAPL join MATNR,WERKS...
    JOIN MARC MATNR and  MAKT MATNR
    JOIN MAPL(werks,plnty,plnnr ) to plpo(werks,plnty,plnnr )
    PLPO  ARBID to  crhd OBJID
    Now execute with your sel fields...

  • Standard Text Key in order

    Hi
       I created std text key in CA10        
      How to configure in "Assign standard texts for short messages to order types" ?
    Alagesan

    The standard text key created by using CA10 will reflect against maintenance order in operation tab when selected from standard text key field in maintenance order operation tab.
    For the above said function no configuration is required. what every standard text key is selected for first operation, is copied automatically in maintenance order short message (provided that short message is not given by user different then first operation).
    Hope this reply helps you.

  • Changes to the Standard Text Key in a PM order

    Hi all,
    Is there a better way to track changes to the Standard Text Key in a PM order? When I change the Standard Text Key in the Operations tab (t-code IW32) and I access the change log (menu: Extras > Other documents > Changes) I only see that the language key has been changed. I don’t see the actual Standard Text Key value. Any ideas?
    Thanks in advance for your help.
    Adriana

    Hi
    To use standard texts, perform the following six steps:
    Select the maintenance order and access the operation overview screen using Goto -->Operation overview.
    You can enter standard text keys in this screen or in a detail screen for the relevant operation.
    Enter a standard text key in the appropriate field and press ENTER .
    If the text is longer that the short text line available, the field Text is selected for that operation.
    Check the long text and edit it if necessary. To do this, select the operation and choose Operation--> Long text.
    The system branches to the text editor screen. If you also entered a short text for the operation and specified that this should not be overwritten by the standard text, you will see the short text displayed in the first line of the editor. The following lines contain the standard text.
    Check the standard text and change it if necessary.
    Save the final version of the text and return to the previous screen with Goto--> Back.
    Save the maintenance order.
    Standard texts are created for your system by your system administrator using the Customizing function.
    Regards
    Makarand Gurjar

  • How to get the real texts according to Standard Text Key maintained in CA10

    Hi ;
    I have a requirement to fetch the standard text based on the standard text key which is maintained by CA10.
    is there any direct way to get those texts without giving 'TEXT NAME', 'TEXT ID' and 'TEXT OBJECT' but just by the standard key?
    Thanks in advance.
    Regards.
    Vindy

    Hi Varma,
    Even if you want to personalise the Text also you can do without checking the DICTREF checkbox. Dirctly you can give the text in the Text elements by using the Menu GOTO -> Text Elemetns -> Selection Texts.
    Regards
    Thiru

  • Standard Text Key printing on Job Ticket Shop Paper

    Hi,
    I have set up using transaction CA10 a series of Standard Text Keys containing approx 500 characters.
    I am using the Standard Text Key on a Service Order but when I am printing the Service Order the first 40 characters are only being printed.
    We have a requirement to print out on the Service Order the Standard Text Key and all of the text and not the first 40 characters.

    Hello,
    One suggestion would be to have a programmer check the SAPScript form that calls the standard text to make sure the formatting is not restricting the length of the text that is being printed.
    Regards,
    Paul

  • Upload Standard Text Key

    Hi expert,
    I am trying to upload Standard Text Key (CA10) for task list. I don't know how to do it, because it contain long text. Can anyone give me a suggestion?
    Thanks,
    Secundes

    I tried CA10 LSMW with fields
    VLSH (C 007), TXT (C 040), TXLINE_02 (C 072), TXLINE_03 (C 072), TXLINE_04 (C 072)
    The last 3 fields are mutiline content, which are generated through the recording. If you attempt 4 lines during the recording another field TXLINE_05. The answer to your question How many characters? is given in the brackets above.
    I did not find a problem here. The problem I faced was some other and was a minor for me.
    That is :
    While processing (Foreground processing only), It was not filling the VLSH field. So what I did was- Enter this field manually & press F5 (create). The rest of the process went smooth by just keep pressing the Enter button.
    So for every record I repeated this initial entry+F5, rest went smooth.
    That was my experience. It is possible you might not face this problem even and everything may go smooth for you.
    (I used Tab delimited Text file for uploading)
    About the BDC programming, I do not have knowledge in this area, so I suggested so.
    Regards....

  • Transport STANDARD TEXT KEY from CA10

    Hi ,
          Is it possible to transport the STANDARD TEXT KEY created in CA10? Please give your suggestion on how it can be done or is it advisable to create entries in each client manually.
    Thank you.

    You can only transport the standard text key along with its short text, long text transportation is difficult as they are not stored in transparent tables.
    Follow the steps:
    1. Go to transaction SE10. Click on Create. 
    2. Following pop-up appears. Select Workbench request.
    3. Now double-click on the request
    4. give the following details:
    Prog ID: R3TR
    Object type: TABU
    Object Name: T435T
    5. Now click on the key button available under the name u201CFunctionu201D
    6. Following screen appears. Double-click on the first empty line.
    7. Here we can provide the entries that we would need to transport.
    Client: Client name
    Language:*
    Std text key: *
    8. Now you can check for the entries that would be transported as per the given condition, by clicking on the table button
    Select the third radio button u201CTable contents specified by current keyu201D.
    9. Click on Save. A warning message would appear.
    Ignore the warning message and click on Save. Now transport this request to transport the data to any other system.

  • Standard Text Key

    Hello All
    Kindly suggest, is there any posibility to attach STANDARD TXT KEY (CA10) in maintenance plan some where, Its already there in maintenance work order,
    but i want the same thing i preventive one, so that no need to go fill same manuallly.
    Regards
    kapil

    Hi
    use the standard text key in task lists operation. it can be copied to preventive orders.
    Regards
    Seenu

  • How to add new text field in standard report

    how to add new text field in standard report?

    Hi,
    I presume you are talking about a report display in ALV and u wish to add a column to it .
    If it is a global requirement ,as in table being used there in ALV can be modified, then you can append the table and the system should pick up the same automatically from there.
    Otherwise , you can make a Z program . Modify the catalog being used in ALV.
    Regards,
    Shweta

  • How to change the text of the standard ALV button?

    Hallo everybody,
    WebDynpro ALV has its own buttons e.g. Export,   Is it possible to change the text "Export" as own text 'SaveInExcel' ?
    Many thanks,
    Meer

    Answer  to this question:
    Wenn der Typ des Oberflächenelements in der Toolbar oder seine Beschriftung vom Standard abweichen sollen, lassen Sie zwar die ALV-Standardfunktion zu, blenden jedoch das zugehörige Oberflächenelement aus. Stattdessen erzeugen Sie eine selbstdefinierte Funktion und weisen ihr die gewünschte ALV-Standardfunktion zu.
    Folgende Oberflächenelemente für ALV-Standardfunktionen können Sie auf diese Weise ersetzen:
    ●      Dropdown-Listbox Senden sowie die einzelnen Einträge der Dropdown-Listbox
    ●      Dropdown-Listbox Anzeigen als sowie die einzelnen Einträge der Dropdown-Listbox
    ●      Drucktasten Zeile einfügen, Zeile anhängen und  Zeile löschen
    ●      Drucktaste Prüfen
    ●      Drucktaste Rückgängig
    ●      Drucktasten Excel und Druckversion
    ●      Drucktaste Filter sowie die Einzelfunktionen Filter definieren und Filter löschen
    ●      Drucktaste Einstellungen  sowie die Einzelfunktionen Dialogfenster Einstellungen öffnen und Dialogfenster Einstellungen schließen
    ●      Dropdown-Listbox Sichten
    Um einer selbstdefinierten Funktion eine ALV-Standardfunktion zuzuweisen, verwenden Sie Methoden der Klasse CL_SALV_WD_FUNCTION.
    sap help

  • I want to change the selection text in the standard report/transaction  .

    I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction

    Hi,
    >
    scoy123 wrote:
    > I have added one screen field to the standard report , now i want to change the selection text in the standard report/transaction
    Refer:-
    CONSTANTS : c_comment(20) TYPE c VALUE 'write your comment'.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(20) c_comment.
    PARAMETERS : p_matnr TYPE matnr.
    SELECTION-SCREEN END OF LINE.
    Hope this helps you.
    Regards,
    Tarun

  • How can i change the sequence of text element in standard driver program ?

    Hi,
    can u tell me how can i change the sequence of text element in standard  sapscript driver program.. without making a zcopy of standard driver program.
    My problem is when MEDRUCK form is getting printed for PO print , header text is coming before item. But the requirement is to come it after item.So how cani do that without making the zcopy of  SAPLMEDRUCK program..Is there any enhancement point in SAPLMEDRUCK driver program..where i can put my customise code for changing the sequence of text element ?

    Hi,
        Just copy the MEDRUCK to ZMEDRUCK. No need to copy the driver program.
    1) SE71Menu > Utilities > COpy from Client
    MEDRUCK ->>Client 000
    New formname ZMEDRUCK
    2) Now open the ZMEDRUCK in DE language in SE71
    3) Menu > Utilities > Convert original Language
    Change DE  to EN, save and activate
    4) Now open the ZMEDRUCK in EN language
    5) Goto Pagewindows > Main window,
    Look for the HEADER text Text element, copy the whole code under this Text element just after the ITEM text Text element, and comment the HEADER text above.
    Now the Header text Text element will be below ITEM text only. This will full fill your requirment.
    Now goto NACE transaction and add the copied ZMEDRUCK to the EF application.
    Regards
    Bala Krishna

Maybe you are looking for

  • Ongoing Desktop Manager Sync Setup problem

    Hello, I am having the "Computer has to be connected to Internet" problem in trying to set up syncing for first time. I see this issue all over these boards as well as Crackberry and others. The first response is always referring to the vague and uni

  • Foreign app store codes in local app store?

    Hey guys, I'm from Italy, living on the border to Austria, so for christmas i got an app store giftcard which was bought in Austria. Now i can't use it while living in Italy with an italian iTunes-account. Hope someone has a solution to my problem. T

  • T430s Two finger scroll not working reliably

    Hi! Sometimes it works, sometimes it takes the skin of my fingers to get two finger scroll working. The system update does not see a reason to update the drivers. Is there more effective software for the synaptic touchpad to do two finger scroll?

  • Can I turn off GSM radio of my Verizon iPhone 5?

    So My Verizon iPhone 5 runs on the CDMA network, but it also has GSM unlocked capabilities. I know that it comes with a Verizon SIM for roaming internationally, which I'm not interested. I have an international sim from my home country, which I use w

  • Is a system copy to development a best practice?

    ("Refresh", as I use it here, refers to a system copy.) We typically refresh our sandbox and pre-production test systems from production. Not often, since its a non-trivial amount of work (although our functional/business teams don't seem to realize