Default userid/password for Essbase 7.1.5

Hi All,<BR> <BR>I've just now upgraded to Essbase 7.1.5. At the time of installation I gave the 'NAME' as 'James Galt' and system password as 'password'.<BR>Earlier on every upgrade it used to recognize the old security file and I could login to a fresh upgrade using my old id/password. But this time it does seem to recognize the essbase.sec file.<BR><BR>could somebody please let me know the default user-id password for version 7.1.5, so that I can atleast login and try creating some users.<BR><BR>Any help in this matter s highly appreciated.<BR><BR>Thanks in advance,<BR>[email protected]

There's no such ting as a default user ID and password for Essbase. The system user ID and password is the one you create when you install Essbase. IF you want to reset and start from scratch, delete the essbase.sec file and launch essbase.exe from \essbase\bin. You will be prompted to enter a new user ID and password. Hint : it's not good practive to use someone's name as the system ID. BE aware of a couple of things if you do this, any users, filters, applications, etc you had we'll be gone and have to be re-created. If this was an upgrade from the previous version, upon install completion, you would run the essbase.exe and it would prompt you for the existing password. If it's not working, chances are you are using the wrong password. Remember, the system password might not be the same as the admin password. For instance at my location, when I did the upgrade I entered the admin password and it didn't work. I asked everyone and they said that was the only password. After digging little deeper I found that a couple of years ago it was determined the passwords were too generic so they changed them. While they changed the admin password, the system password stayed the same. After digging, I found out what the old password was and sure enough I was able to fire it up. If you don't have existing apps and users to worry about then just start fresh, but if you want to salvage what you had, then you will need to find the right password. One more thing, if you have Essbase running as a service, disable the service and run it in console mode until you get this straightened out. <BR><BR>HTH

Similar Messages

  • What is default UserID/Password for Oracle 11g

    Hello experts,
    I’m new to Oracle and installed 11g first time on Windows. Installation has finished successfully. It gave me the link on open my database.
    Enterprise Manager Database Control URL - (orcl) :
    https://192.168.2.25:1158/em
    when I open it it ask for user id and password. I don’t know what is my userid is. Can anybody help me with this issue.
    Thanks a lot in advance.
    Edited by: user10791378 on Aug 16, 2009 1:36 PM

    >
    I’m new to Oracle and installed 11g first time on Windows. Installation has finished successfully. It gave me the link on open my database.
    Enterprise Manager Database Control URL - (orcl) :
    https://192.168.2.25:1158/em
    when I open it it ask for user id and password. I don’t know what is my userid is. Can anybody help me with this issue.
    >
    You can log in to the Enterprise Manager Database Control with any DBA user. Typically, you should be able to logon as sys or as system. The passwords for these two users where specified by you during the install of the database.
    If you can't remember them, you should be able to change them on the command line after a connect as sysdba there.
    Kind regards
    Uwe
    http://uhesse.wordpress.com

  • Dynamic UserID/Password for file Adapter

    Hi,
    How to use dynamic UserId/Password for file adapter ?
    (Sender/Receiver)
    In our case the Id/Pwd of FTP Site changes freguently.
    Can anyone help.
    Thanks in Advance
    Regards
    Chemmanz

    Hi Chemmanz,
    >>>>In our case the Id/Pwd of FTP Site changes freguently.
    but do you have those passwords in the message payload?
    if not then you will still have to fill it somewhere right?
    BTW
    the only way would be to use java proxies and write a simple ftp adapter inside it (or your own adapter)
    but this is not possible in standard I believe
    Regards,
    michal

  • Chang system userid/password for another server instance

    It it possible to change the system userid/password for another server
    instance. If so , how ?
    I would like to allow certain groups to be able to start and stop ONLY their
    server without giving out the system account.
    Thanks in advance!

    the relationship between the infrastructure nodes and the application server nodes is a one to many relationship. The infrastructure home should be the only home that the EMWebsite service has been started for.
    the user to log in to em console is ias_admin/<password> if it does not accept the password that you set for this user then try it with caps lock on as you may have had it one when setting the password.
    As 9ias release 2 has been designed with a multiple machine install in mind, if you install more than one instance (multiple oracle homes) on the server then you will end up with multiple apache processes and oc4j processes. This means you will be able to connect to 2 apache server homepages under different ports. That is why you get the same page.

  • Help - Default OS password for installing updates?

    I have a G4. I tried to download and install software updates last night but it asked me for a password to install the updates. I'm not aware of any password I set up.
    Does anyone know if there is a default password for installing new software?

    I'm not sure how this relates to AppleScript, but..
    There is no default password that anyone else can tell you.
    If you're using an admin account you can use your username and password, otherwise you can use 'admin' using the password you defined when you first installed/ran the system.
    If you don't recall that password, boot from the installer CD/DVD and choose the 'Change root password' option from the menus in the installer (before you actually run the install).

  • What is the DEFAULT BIOS Password for my Probook 6550b?

    I have been struggling to find a DEFAULT password for my 6550b (i5 Windows 7)
    I want to change my boot order so I can install Windows 8, but I can't since if I install it, I would be stuck in limbo and I don't want to take the risk.
    I have previously cracked the BIOS Password on a Dell Latitude E4510 and everyone said that was IMPOSSIBLE! So I am sure you guys can help here, thanks

    Hello MazingerZ,
    Your ProBook is a Business model.  Your issue would be best answered on the HP Enterprise Business Community Forum
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Default sap* password for new client copy ?

    Hi Basis Expert,
    What is the default password for sap*, i have create new client with SCC4 and i tried to login but failed.
    please advise what is the default password for sap*.
    i am using Netweaver 7.0 SP16.
    Thank you and best regards
    Fernand

    Hi!
    If you followed the procedure, you should have set the profile parameter login/no_automatic_user_sapstar to 0 and restarted application server. After that you can login using SAP* and password PASS.

  • Default userid password

    hi guise.
    when i run oracle designer it's ask me user id / password...
    i dont's know the userid password can u plz help me..

    When the repository was installed, it was installed under a repository owner which is an Oracle user in the repository's database. The repository owner in turn can use the Repository Administration tools to grant access to other Oracle users in the same database. These are given various levels of access, one of which allows them to create new containers using the Repository Object Navigator. They can then grant access to their containers to other users.
    So you must go to your database administrator for the database containing your repository and ask for a username and password, then to the repository administrator and ask for that username to be granted access to the repository, and finally to the owners of any containers to which you need access. Fortunately, these are often all the same person - maybe you?

  • Reason for using "UserID:password" for PKCS11 when it only accepts a pin?

    With respect to TDE with HSM, I understand that the following command is used to set the master encryption key for Oracle Database 11g. However, why does a userID have to be specified, when the PKCS#11 library only requires a PIN?
    ALTER SYSTEM SET ENCRYPTION KEY IDENTIFIED BY "userID:password"

    Hello Lopper,
    we used this as an example; today, you'll find it mostly written as:
    SQL> alter system set ... identified by "HSM_auth_string"; where "HSM_auth_string" can be "user_name:password", a "PIN", or just a "Password".
    HTH, Peter

  • Default Server Password for WL 6.0 SP2

    I have installed WL 6.0 SP2 and try running the console..
    The server works fine (no errors) but when I try to acces the console app [default
    port 7001/console] I get a request for a username / password..
    I understand this is normal and there is no way to retreive the default username
    and/or password.
    I have heard that the username is "system" and the password is "password" by default.
    Can anyone confirm this?? Because I have 5 boxes which cannot be used for WL6.0.
    Thanks in advance.
    Rod (ENIT)

    Rodney,
    The password should have been entered when the WLS 6.0 was installed. If
    you have forgotten the password and if you have the examples domain
    installed you can start that examplesserver and access the console.
    If the installation was done by a different person you might want to
    check the config/domain directory to see if there is a password.ini
    file. This file if present will contain the password for that domain.
    Hope this helps
    Raj Alagumalai
    Rodney Laycock wrote:
    Either I am a pure fluke when it comes to guessing, or I have been guided by some
    mystical force..
    The username is: system
    The password is: password
    If anyone would like me to pick lottery numbers for them ;o)
    Rodney
    "Rodney Laycock" <[email protected]> wrote:
    I have installed WL 6.0 SP2 and try running the console..
    The server works fine (no errors) but when I try to acces the console
    app [default
    port 7001/console] I get a request for a username / password..
    I understand this is normal and there is no way to retreive the default
    username
    and/or password.
    I have heard that the username is "system" and the password is "password"
    by default.
    Can anyone confirm this?? Because I have 5 boxes which cannot be used
    for WL6.0.
    Thanks in advance.
    Rod (ENIT)

  • HT1904 what is the default admin password for parental control in itunes

    My parental control is set my itune.  I don't remember doing it.  I was wondering if the there a default password for itune

    By default, it's set to an illegal value. Unless the root user has been enabled, nothing will be accepted.
    (87130)

  • What is the default root password for iMac?

    Did I miss something in the install?
    I don't have the password for the root account.
    Is there a standard default?
    Regards,
    Ellen

    The root account is not enable by default. You will have to enable it if you what it.
    But let me ask you why you want to enable it? Most users have no trouble maintaining their machines by using either an admin account or sudo whne the need for root privileges arise.

  • How to change default PIRWBUSER password for ABAP Proxy monitoring ?

    Hi,
    Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
    In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
    How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
    Regards
    Fernand

    Hello there.
    Please check the note below according to your system:
    #999962 - PI 7.10: Change passwords of PI service users
    #936093 - XI 7.0: Changing the passwords of XI service users
    #721548 - XI 3.0: Changing the passwords of the XI service users
    Regards,
    Caio Cagnani

  • How to change the default admin password for IAS/UDDI

    Using "OracleAS UDDI Registry" 10g Release 2 (10.1.2)
    http://docs.oracle.com/cd/B15904_01/web.1012/b14027/regwsuddi.htm
    How to change the default password
    ias_admin/ias_admin123
    http://xxx.xx.xxx.xx/uddi/publishing

    Hello NJ,
    I tried your solution and its a very good workaround for the workbooks stored in the Database, but when i open workbooks from file system then Discoverer defaults the export path to the Directory from where we have opened the workbook.
    My clients are having most of their workbooks stored in File system & stored at different locations. So i wonder if there is just one common solution if possible?
    Thanks

  • Userid & password for Enterprise Manager?!! pls help.

    I installed Release 2 9i Infrastructure, Application Server and Developement kit on one NT machine, they were all installed under separate Oracle Home like
    d:\oracle\oracleHome (for infrastructure)
    d:\oracle\ASHome (for AS)
    d:\oracle\SDKHome (for DK)
    1. I saw under 'Start/Programs' these folders contain similar things like 'Start/Stop HTTP Server', do I have to start each of these manually?
    2. I saw from the notes that we can check the status of the servers by going to the Enterprise Manager.
    However, it prompts a window for userid and password. <== which user id and password does it needs?
    3. Is there only one Enterprise Manager for all (Infrastructure + AS)?
    from my notes and memory during installation, i have only created an instance name and a ias_admin password! (but it does not accept)
    Please tell me the clue to these, and the next step to start building a Portal home.
    Thanks very much,
    a very very newbie :-)

    the relationship between the infrastructure nodes and the application server nodes is a one to many relationship. The infrastructure home should be the only home that the EMWebsite service has been started for.
    the user to log in to em console is ias_admin/<password> if it does not accept the password that you set for this user then try it with caps lock on as you may have had it one when setting the password.
    As 9ias release 2 has been designed with a multiple machine install in mind, if you install more than one instance (multiple oracle homes) on the server then you will end up with multiple apache processes and oc4j processes. This means you will be able to connect to 2 apache server homepages under different ports. That is why you get the same page.

Maybe you are looking for