Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource. 
This test report has one Static parameter. 
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

Similar Messages

  • Defining default value for financial reports display in the workspace (9.3)

    Hi
    I need to change the default value for financial reports workspace preview mode, for every workspace user. It is actually set on html, and I would like to have pdf instead.
    This option can be changed when logged on the workspace, in file->preferences->financial reporting->default preview mode. However I want every user to start with the right settings, so they dont have to change anything manually.
    I have tried to do it with Shared Services : under projects, BI+, assign preferences. From there I can change the default folder and the start page (the general preferences), however I cannot find the options for financial reporting.
    Is there a way to change these values with hyperion tools ?
    If not, is it possible to change it directly in the repository DB ?Thanks and best regards

    We looked at this about 2 years ago - from memory, you can only set preferences when the users are first setup in Shared Services, under the manage preferences section of the wizard.
    I can't remember if there is a settings file you can edit for the default users - i think there is, but again this must be set before users are set up.
    We looked at changing users preferences, but gave up on the idea as all users had been provisioned already :-(
    Cheers, Iain

  • Macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner

    macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

    macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

  • My firefox toolbars are not visible when I open firefox

    All of my firefox toolbars are not visible when I open firefox. I get the tabs but no command menu no search bar or any other toolbar icons help!!
    == This happened ==
    Every time Firefox opened
    == when I logged on one day about 2 weeks ago ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

    <u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
    Turning the Menu Bar on and off is a new feature in version 3.6.
    ''(Linux & OSX see: [[Menu bar is missing]] )''
    <u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M
    <u>''Windows'' Method 2.</u> Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
    The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
    See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    <u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
    <u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
    <u>'''Full Screen mode'''</u>
    http://kb.mozillazine.org/Netbooks#Full_screen
    Also see:
    ''' [[Back and forward or other toolbar buttons are missing]]'''
    '''[[Navigation Toolbar items]]'''

  • Modify default value for static parameter field programmatically

    Hi,
    I have my Crystal Reports stored in a BO Enterprise system. I have written a java programm that scans the repository, loads the CR reports one by one into a ReportClientDocument, modifies the data source and then stores the updated report back to repository (it overwrites the existing objects).
    I was even able to modify the default values for the parameters, which are used for scheduling of each report.
    But what I am trying to do know is to overwrite the default value used when invoking the report interactively. This should be the value found under the Default Value field, when the Properties window of the parameter is opened in the CR designer.
    This is what I have tried so far:
    Option 1: First I tried to set the default values using com.crystaldecisions.sdk.occa.report.application.ReportClientDocument.getDataDefinition().getParameterFieldController().getField(...).getDefaultValues() . The only thing I have managed to do using this approach is to modify the static LOVs that are associated to static parameters. The actual selected value (shown under Default Value in the Properties window for the given parameter field) remained unchanged, when invoking the report in the InfoView or opening it in the CR designer.
    Option 2: I have used com.crystaldecisions.sdk.plugin.desktop.report.IReport.getReportParameters().get(ik).getDefaultValues() to change the default values. I was able to see my changes in the BO repository (using a query on CI_INFOOBJECTS), still the changes did not really have an impact to what is displayed as default value when invoking the report in the InfoView.
    Any help will be appreciated.
    It would be great to know if someone of you has already implemented successfully such a use-case.
    Regards,
    Stratos
    Edited by: Efstratios Karaivazoglou on Dec 9, 2009 8:52 AM
    Edited by: Efstratios Karaivazoglou on Dec 15, 2009 11:33 PM

    Hi,
    For Crystal Design related queries, close this thread and start the thread in the [SAP Crystal Reports Design forums|http://forums.sdn.sap.com/forum.jspa?forumID=300&start=0]
    - Bhushan

  • Constant values (public static final String) are not shown??

    This has already been posted and no body answered. Any help is appreciated.
    In web service is it possible to expose the Constants used in the application. Let say for my web service I need to pass value for Operation, possible values for this are (add, delete, update). Is it possible expose these constant values(add, delete, update) visible to client application accesssing the web service.
    Server Side:
    public static final String ADD = "ADDOPP";
    public static final String DELETE = "DELETEOPP";
    public static final String UPDATE = "UPDATEOPP";
    client Side: mywebserviceport.setOperation( mywebservicePort.ADD );
    thanks
    vijay

    Sure, you can use JAX-WS and enums.
    For example on the server:
    @WebService
    public class echo {
    public enum Status {RED, YELLOW, GREEN}
    @WebMethod
    public Status echoStatus(Status status) {
    return status;
    on the client you get.
    @WebService(name = "Echo", wsdlLocation ="..." )
    public interface Echo {
    @WebMethod
    public Status echoStatus(
    @WebParam(name = "arg0", targetNamespace = "")
    Status arg0);
    @XmlEnum
    public enum Status {
    GREEN,
    RED,
    YELLOW;
    public String value() {
    return name();
    public static Status fromValue(String v) {
    return valueOf(v);
    }

  • Report messages are not visible

    when i click on message reports in Operations tab. its not dipaying the report message. Instead it giving meassage like
    "Provider Not Available :JMS Reporting Provider is not deployed, or it is not active ".
    What i have to do in order to see report messages.

    It should be running by default. Is this your own local environment?
    You can check the deployment in WLS console. Click Deployments on the left and find "JMS Reporting Provider". Make sure that it is Active and if not, try to start it.
    If it is not there at all, try to deploy it from BEA_HOME\weblogic92\servicebus\lib\common (remember to start it).
    Hopefully that is all you will need to deploy.

  • Icons are not visible when the form is run

    I develop a form with only a push button. I developed form using oracle 10DS. I have saved my form in application server. To see an icon in my button, i did the following things:
    1. In application server i made a jar named test.jar. It consists of just two gif images.
    2. I copied this jar in application server's \forms90\java directory
    3. I configured formsweb.cfg file as the following.
    4. my \form90\java\oracle\forms\registry\registry.dat is as the following.
    whenever i run form i can not see icon but in client's oracle jar cache jar is downloaded.
    -------------------------------formsweb.cfg -------------------------------------------
    =========================
    # $Id: formsweb.cfg,v 1.24 2003/08/22 01:07:35 pkuhn Exp $
    # formsweb.cfg defines parameter values used by the FormsServlet (f90servlet)
    # This section defines the Default settings. Any of them may be overridden in the
    # following Named Configuration sections. If they are not overridden, then the
    # values here will be used.
    # The default settings comprise two types of parameters: System parameters,
    # which cannot be overridden in the URL, and User Parameters, which can.
    # Parameters which are not marked as System parameters are User parameters.
    # SYSTEM PARAMETERS
    # These have fixed names and give information required by the Forms
    # Servlet in order to function. They cannot be specified in the URL query
    # string. But they can be overriden in a named configuration (see below).
    # Some parameters specify file names: if the full path is not given,
    # they are assumed to be in the same directory as this file. If a path
    # is given, then it should be a physical path, not a URL.
    # USER PARAMETERS
    # These match variables (e.g. %form%) in the baseHTML file. Their values
    # may be overridden by specifying them in the URL query string
    # (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
    # or by overriding them in a specific, named configuration (see below)
    [default]
    # System parameter: default base HTML file
    baseHTML=base.htm
    # System parameter: base HTML file for use with JInitiator client
    #baseHTMLjinitiator=basejini.htm
    # System parameter: base HTML file for use with Sun's Java Plug-In
    baseHTMLjpi=basejpi.htm
    # System parameter: base HTML file for use with Microsoft Internet Explorer
    # (when using the native JVM)
    baseHTMLie=baseie.htm
    # System parameter: delimiter for parameters in the base HTML files
    HTMLdelimiter=%
    # System parameter: working directory for Forms runtime processes
    # WorkingDirectory defaults to <oracle_home>/forms90 if unset.
    workingDirectory=
    # System parameter: file setting environment variables for the Forms runtime
    processes
    envFile=default.env
    # System parameter: JVM option for Microsoft Internet Explorer.
    # This parameter specifies how to execute the Forms applet under
    # Microsoft Internet Explorer 5.x or above. Put IE=native if you want
    # the Forms applet to run in the browser's native JVM.
    IE=JInitiator
    # Forms runtime argument: whether to escape certain special characters
    # in values extracted from the URL for other runtime arguments
    escapeparams=true
    # Forms runtime argument: which form module to run
    form=test.fmx
    # Forms runtime argument: database connection details
    userid=
    # Forms runtime argument: whether to run in debug mode
    debug=no
    # Forms runtime argument: host for debugging
    host=
    # Forms runtime argument: port for debugging
    port=
    # Other Forms runtime arguments: grouped together as one parameter.
    # These settings support running and debugging a form from the Builder:
    otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array%
    obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record%
    tracegroup=%tracegroup% log=%log% term=%term%
    # Sub argument for otherparams
    buffer=no
    # Sub argument for otherparams
    debug_messages=no
    # Sub argument for otherparams
    array=no
    # Sub argument for otherparams
    obr=no
    # Sub argument for otherparams
    query_only=no
    # Sub argument for otherparams
    quiet=yes
    # Sub argument for otherparams
    render=no
    # Sub argument for otherparams
    record=
    # Sub argument for otherparams
    tracegroup=
    # Sub argument for otherparams
    log=
    # Sub argument for otherparams
    term=
    # HTML page title
    pageTitle=Oracle Application Server Forms Services
    # HTML attributes for the BODY tag
    HTMLbodyAttrs=
    # HTML to add before the form
    HTMLbeforeForm=
    # HTML to add after the form
    HTMLafterForm=
    # Forms applet parameter: URL path to Forms ListenerServlet
    serverURL=/forms90/l90servlet
    # Forms applet parameter
    codebase=/forms90/java
    # Forms applet parameter
    imageBase=codeBase
    # Forms applet parameter
    width=750
    # Forms applet parameter
    height=600
    # Forms applet parameter
    separateFrame=false
    # Forms applet parameter
    splashScreen=
    # Forms applet parameter
    background=
    # Forms applet parameter
    lookAndFeel=Oracle
    # Forms applet parameter
    colorScheme=teal
    # Forms applet parameter
    logo=
    # Forms applet parameter
    restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow
    _debug,allowNewConnections
    # Forms applet parameter
    formsMessageListener=
    # Forms applet parameter
    recordFileName=
    # Forms applet parameter
    serverApp=default
    # Forms applet archive setting for JInitiator
    archive_jini=f90all_jinit.jar,classes12.jar,test.jar
    # Forms applet archive setting for Microsoft Internet Explorer native JVM
    archive_ie=f90all.cab
    # Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer,
    etc)
    archive=f90all.jar
    # Number of times client should retry if a network failure occurs. You should
    # only change this after reading the documentation.
    networkRetries=0
    # Page displayed to Netscape users to allow them to download Oracle JInitiator.
    # Oracle JInitiator is used with Windows clients.
    # If you create your own page, you should set this parameter to point to it.
    jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
    # Parameter related to the version of JInitiator
    jinit_classid=clsid:CAFECAFE-0013-0001-0017-ABCDEFABCDEF
    # Parameter related to the version of JInitiator
    jinit_exename=jinit.exe#Version=1,3,1,17
    # Parameter related to the version of JInitiator
    jinit_mimetype=application/x-jinit-applet;version=1.3.1.17
    # Page displayed to users to allow them to download Sun's Java Plugin.
    # Sun's Java Plugin is typically used for non-Windows clients.
    # (NOTE: you should check this page and possibly change the settings)
    jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
    # Parameter related to the version of the Java Plugin
    jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
    # Parameter related to the version of the Java Plugin
    jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version
    =1,3,0,0
    # Parameter related to the version of the Java Plugin
    jpi_mimetype=application/x-java-applet;version=1.3
    # EM config parameter
    # Set this to "1" to enable Enterprise Manager to track Forms processes
    em_mode=0
    # Single Sign-On OID configuration parameter
    oid_formsid=formsApp_drsshl_C75ED7E7CA18492FA35AA090350527B7
    # Single Sign-On OID configuration parameter
    oracle_home=E:\Oracle_SHLAS
    # Single Sign-On OID configuration parameter
    formsid_group_dn=cn=Logical Application Group,
    orclApplicationCommonName=formsApp_drsshl_C75ED7E7CA18492FA35AA090350527B7,
    cn=forms, cn=Products, cn=OracleContext
    # Single Sign-On OID configuration parameter: indicates whether we allow
    # dynamic resource creation if the resource is not yet created in the OID.
    ssoDynamicResourceCreate=true
    # Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
    ssoErrorUrl=
    # Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
    ssoCancelUrl=
    # Single Sign-On parameter: indicates whether the url is protected in which
    # case mod_osso will be given control for authentication or continue in
    # the FormsServlet if not. It is false by default. Set it to true in an
    # application-specific section to enable Single Sign-On for that application.
    ssoMode=false
    # The parameter allow_debug determines whether debugging is permitted.
    # Administrators should set allow_debug to "true" if servlet
    # debugging is required, or to provide access to the Forms Trace Xlate utility.
    # Otherwise these activities will not be allowed (for security reasons).
    allow_debug=false
    # Parameter which determines whether new Forms sessions are allowed.
    # This is also read by the Forms EM Overview page to show the
    # current Forms status.
    allowNewConnections=true
    # Example Named Configuration Section
    # Example 1: configuration to run forms in a separate browser window with
    # "generic" look and feel (include "config=sepwin" in the URL)
    # You may define your own specific, named configurations (sets of parameters)
    # by adding special sections as illustrated in the following examples.
    # Note that you need only specify the parameters you want to change. The
    # default values (defined above) will be used for all other parameters.
    # Use of a specific configuration can be requested by including the text
    # "config=<your_config_name>" in the query string of the URL used to run
    # a form. For example, to use the sepwin configuration, your could issue
    # a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
    [sepwin]
    separateFrame=True
    lookandfeel=Generic
    # Example Named Configuration Section
    # Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
    # Forms applet will run under the browser's native JVM rather than using Oracle
    JInitiator.
    [ienative]
    IE=native
    # Example Named Configuration Section
    # Example 3: configuration forcing use of the Java Plugin in all cases (even if
    # the client browser is on Windows)
    [jpi]
    baseHTMLJInitiator=basejpi.htm
    baseHTMLie=basejpi.htm
    # Example Named Configuration Section
    # Example 4: configuration running the Forms ListenerServlet in debug mode
    # (debug messages will be written to the servlet engine's log file).
    [debug]
    serverURL=/forms90/l90servlet/debug
    [test]
    form=E:\ict\ITSUPPORT\test.fmx usesdi=yes
    userid=support/s00001@dshl
    width=100%
    height=100%
    colorscheme=blue
    pageTitle=ICT Support :: Just in Time
    imagebase=codebase
    archive_jini=f90all_jinit.jar,rolloverbutton.jar,getclientinfo.jar,infobutton.jar,test.jar
    webUtilArchive=frmwebutil.jar,jacob.jar
    baseHTMLjinitiator=webutiljini.htm
    #lookAndFeel=Oracle
    splashscreen=ash.gif
    logo=none
    separateFrame=false
    ******************************************** registry.dat
    ---=========================
    # This is the Registry file.
    # This file contains the logical [Java] Class name and an associated
    # [numerical] identifier that will be used to refer to objects of the
    # class in order to reduce the amount of information that needs to be
    # repeatedly transmitted to the client.
    # This file is of the Form understood by java.util.Properties (for now)
    # The System Level sound file is relative to the CODEBASE
    oracle.classById.1=oracle.forms.engine.Runform
    oracle.classById.4=oracle.forms.handler.FormWindow
    oracle.classById.5=oracle.forms.handler.AlertDialog
    oracle.classById.6=oracle.forms.handler.DisplayList
    oracle.classById.7=oracle.forms.handler.LogonDialog
    oracle.classById.8=oracle.forms.handler.DisplayErrorDialog
    oracle.classById.9=oracle.forms.handler.ListValuesDialog
    oracle.classById.10=oracle.forms.handler.EditorDialog
    oracle.classById.11=oracle.forms.handler.HelpDialog
    oracle.classById.12=oracle.forms.handler.FormStatusBar
    oracle.classById.13=oracle.forms.handler.MenuInfo
    # oracle.classById.14=UNUSED
    oracle.classById.15=oracle.forms.handler.ApplicationTimer
    oracle.classById.16=oracle.forms.handler.MenuParametersDialog
    oracle.classById.17=oracle.forms.handler.PromptListItem
    oracle.classById.18=oracle.forms.handler.CancelQueryDialog
    oracle.classById.257=oracle.forms.handler.TextFieldItem
    oracle.classById.258=oracle.forms.handler.TextAreaItem
    oracle.classById.259=oracle.forms.handler.FormCanvas
    oracle.classById.261=oracle.forms.handler.ButtonItem
    oracle.classById.262=oracle.forms.handler.CheckboxItem
    oracle.classById.263=oracle.forms.handler.PopListItem
    oracle.classById.264=oracle.forms.handler.TListItem
    oracle.classById.265=oracle.forms.handler.CfmVBX
    oracle.classById.266=oracle.forms.handler.CfmOLE
    oracle.classById.267=oracle.forms.handler.RadioButtonItem
    oracle.classById.268=oracle.forms.handler.ImageItem
    oracle.classById.269=oracle.forms.handler.IconicButtonItem
    oracle.classById.270=oracle.forms.handler.BlockScroller
    oracle.classById.271=oracle.forms.handler.JavaContainer
    oracle.classById.272=oracle.forms.handler.TabControl
    oracle.classById.273=oracle.forms.handler.ComboBoxItem
    oracle.classById.274=oracle.forms.handler.TreeItem
    oracle.classById.281=oracle.forms.handler.PopupHelpItem
    # Defaults for the Font details, all names are Java Font names. Each of
    # these parameters represents the default property to use when none is
    # specified.
    # defaultFontname represents the default Java fontName.
    # defaultSize represents the default fontSize. Note that the size is
    # multiplied by 100 (e.g. a 10pt font has a size of 1000).
    # defaultStyle represents the default fontStyle, PLAIN or ITALIC.
    # defaultWeight represents the default fontWeight, PLAIN or BOLD.
    default.fontMap.defaultFontname=Dialog
    default.fontMap.defaultSize=900
    default.fontMap.defaultStyle=PLAIN
    default.fontMap.defaultWeight=PLAIN
    # Default Font Face mapping.
    # appFontname represents a comma delimited list of Application Font Names.
    # javaFontname represents a comma delimited list of Java Font Names.
    # The number of entries in the appFontname list should match the number in
    # the javaFontname list. The elements of the list are comma separated and
    # all characters are taken literally, leading and trailing spaces are
    # stripped from Face names.
    # Note that this file uses the Java 1.1 Font names in order to be able to
    # handle the NLS Plane (BUG #431051)
    default.fontMap.appFontnames=Courier New,Courier,courier,System,Terminal,Fixed,Fixedsys,Times,Times New Roman,MS Sans Serif,Arial, Kunstler Script
    default.fontMap.javaFontnames=MonoSpaced,MonoSpaced,MonoSpaced,Dialog,MonoSpaced,Dialog,Dialog,Serif,Serif,Dialog,SansSerif, Kunstler Script
    # The Application Level icon files are relative to the DOCUMENTBASE
    # example: icons/
    # or an absolute URL.
    # example: http://www.forms.net/~luser/d2k_project/
    default.icons.iconpath=
    default.icons.iconextension=gif
    # Application level settings to control UI features
    app.ui.lovButtons=true
    app.ui.requiredFieldVA=false
    # The background color is specified as an RGB triple.
    app.ui.requiredFieldVABGColor=255,0,0
    ---====================================
    I tried many times. But could not be successful. Then I just kept my icons in
    \forms90\java directory without making jar. In my form, icon file name is the icon name without extension. Here, i can see my icon in button. but if i replace an icon
    without changing the name of the icon, then i always see the old icon. The new icon, i can not see.
    Please, help me with only Oracle 10g AS how i can see icon in button. Let's assume, there is not oracle 10g DS (any development tool) in the machine where the form is run.
    Please, guide me clearly step by step so that i might be successful.
    Thanks.
    TKARIM

    Thanks Bernard,
    It works fine with JInitiator but not working with
    the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
    i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
    Thx and Regards
    dkklau

  • After Effects are not visible when exporting in Adobe Premiere Pro CS4

    I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND  when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
    I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
    What is it that i'm doing wrong?
    Thanks in advance!

    The names are the same, but the programs are very different... CS4 is 32bit, CS5 and later is completely rewritten to be 64bit
    So, there is a different forum for CS4 and earlier http://forums.adobe.com/community/premiere/premierepro_previous?view=all

  • After Effects are not visible when exporting in Adobe PP CS4

    Hi all of you experts!
    I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND  when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
    I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
    What is it that i'm doing wrong?
    Thanks in advance!

    Thanks for your reply!
    Is there any specific firmat i should export as? I have only tried as a *.AE file (which does not show on the final video) and as a *.MP4 file (whick does not have a transparent background - so i cannot use this)

  • Defaults value for JMOP , JAOP & JSOP is not coming in MIGO

    Hello Experts,
    If I maintianed  condition type JMOP, JAOP, JSOP  in  SPRO - Maintain Exise Default. Then value comes default in MIGO at the time GR then Part 1, Part 2 also updated But Tax is not calculated in MIRO. I used TAXINN procedure.
    Regards,
    Dipu

    Dear
         Make sure that you have to check following few points.
    1) All condition records for JMOP,JEC1,JSEP and their respective set off JMX1, JEX1, JHX1 are correctly maintained.
    2) Then this tax code should be maintained to company code in SPRO- Logistics General- Tax on goods Movements- Basic settings- Determination Of Excise Duty- Condition Based Excise Determination- Assign Tax code to Company code
    3) Then in that same path SPRO- Logistics General- Tax on goods Movements- Basic settings- Determination Of Excise Duty-  Condition Based Excise Determination- Classify condition types . Assign all condition types to TAXINN .This is important from the point of view of TAXINN .
    For TAXINN maintaining excise default carries no significance except CVD condition types.
    4) One more thing in excise PART II entry is everything fine . Else check SPRO- Logistics General- Tax on goods Movements- Account determination - Specify Excise Accounts per excise transactions . There you check all credit , debit conditions against GRPO excise tranaction types.
    Revert back if issue is still not solved ..
    Abhijit Das

  • Web Analysis reports charts are not visible in work space

    Hi All,
    I have created couple of reports in web analysis 11.1.1.3 with charts embeeded in that reports and when i open the same report in the workspace iam not able to see the chart.
    If any one have faced this issue give me an idea .
    Following are the logs
    <event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795266678" level="ERROR" thread="TP-Processor3" sequence_no="13">
    <time>09 Nov 2009 12:34:26,678</time>
    <context originator_type="WebAnalysis"/>
    <message><![CDATA[
    No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
    </event>
    <event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795329303" level="ERROR" thread="TP-Processor3" sequence_no="14">
    <time>09 Nov 2009 12:35:29,303</time>
    <context originator_type="WebAnalysis"/>
    <message><![CDATA[
    No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
    </event>
    <event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795332502" level="ERROR" thread="TP-Processor3" sequence_no="15">
    <time>09 Nov 2009 12:35:32,502</time>
    <context originator_type="WebAnalysis"/>
    <message><![CDATA[
    No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
    </event>
    <event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795337055" level="ERROR" thread="TP-Processor3" sequence_no="16">
    <time>09 Nov 2009 12:35:37,055</time>
    <context originator_type="WebAnalysis"/>
    <message><![CDATA[
    No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
    </event>
    Thanks,
    Ram

    I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
    This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
    <?xml version="1.0" encoding="UTF-8"?>
    <deployment>
    <device>
    <repository>
    <mcd name="IrviaDemoApp" namespace="" version="1">
    <action type="install"/>
    <location type="local">
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
    <component name="hpcds.es~irvia_demo_app">
    <applications>
    <application deploy="true" name="IrviaDemoApp"/>
    </applications>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
    <source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
    </component>
    </location>
    </mcd>
    </repository>
    </device>
    </deployment>
    There is a <source> entry for the mimes directory, where "Component images" are located.
    PD: Sorry about my poor english. I hope you to understand me.

  • Items in shared mailbox are not visible when using cached mode in Outlook 2013

    Hi all,
    When using Outlook 2013 working with the users own mailbox works great, but when a user connects an additional mailbox to its mailbox, this mailbox is shown correctly, but it contains no items. The folder list is shown correctly, but there are no items to be
    seen.
    These users (I have seen it with 3 different users and 2 shared mailboxes already) have full access to these mailboxes (Exchange 2010), but somehow the items aren't shown... When these users turn off cached mode, it works fine and when they use Outlook 2010
    it also works fine, but using Outlook 2013 with cached mode will only show their own items and not the items in an additional shared mailbox.
    What is the cause of all this?
    Kind regards,
    Erik

    Maybe something interesting...
    When looking at article http://support.microsoft.com/kb/982697/en-us
    I saw that Outlook 2013 by default caches everything and that's what I wanted. I tested however adding this regkey to see what happened and after that the email shows up in the mailboxes... Somehow the mail from shared mailboxes doesn't want to be
    cached...
    Does anyone know what this could be? I want everything to be cached, also the shared mailboxes but somehow this doesn't work and it does when using Outlook 2010....

  • 'Send an email invitation' & 'Select a permission level' options are not visible when clicking "Show Options"

    We're using a modified master page, which is 99% identical to the Seattle.master file. However, we are facing some JavaScript issues. This one in particular is affecting the event listener for the "Show Options" link while adding a new user.
    If anyone knows what SharePoint OOTB JavaScript functions and/or file is directly linked to this event handler, please share. Thanks in advance!

    Hi,
    Per my knowledge, the "Show More" link use the function as below:
    onclick="EnsureScriptParams('foldhyperlink.js', 'ToggleFoldText', '4f7670f8b24440de93663a84177ebd88', 'ctl00_PlaceHolderMain_ctl03__moreDetailsLink', 'Hide options', 'Show options');ShowHideMoreOptions();return false;">
    Thanks,
    Linda
    Linda Li
    TechNet Community Support

  • MAC Files are not Visible when logged in on Windows

    HEllo
    I installed 10.5 with Boot camp and Windows XP successfully on my MAc Mini (1GB RAM).
    When i log on to MAC i see the Windows partitoned HDD and its contents however when i log on to windows i cant see the MAC Partitoned HDD in windows explorer.
    Does any one know a workaround to this issue?
    Thanks

    What you see has always been and is normal. However, if you must, you can buy MacDrive7 - they have a demo - which allows 32-bit versions of Windows to access (r/w) to HFS+ volumes.

Maybe you are looking for

  • Trying To Upgrade Phone - Getting Error Message When I Try To Upgrade to Incredible

    I'm trying to upgrade to the incredible on the web site and it comes back with an error message. I tried all other phones and I could select them fine. Thoughts?

  • Connect IPlanet Directory Server(5.0) with ADSI

    Has anyone ever had to connect to a iPlanet Directory Server 5.0 with ADSI? I can retrieve the entries(user's information), but I can't add the user-defined objClass and attributes to entries(user). If you know, please kindly to give me some hints ab

  • USB not recognized during restore

    Trouble with upgrading software, the process hangs in the restore, keep getting error 1604, wondering if the USB is getting reset in the restore process?  I have turned off the virus protections,etc. so that should not be the problem.

  • Z3 Compact using mobile data even when disabled.

    Hey there, my new z3 compact is connecting to the mobile internet every 3 hours and causing costs! Mobile data is disabled in the setting and in the quick menu. WIFI is available all the time. In the settings it shows 0MB of volume for all apps. Besi

  • How to set speaker and headphone volume together T540p

    My new Thinkpoad sets the headphone and speaker volume separately. I am always adjusting as I use headphones and speakers at different times frequently. I would lke the volumes to be synchronized and change both together using the volume key. Can thi