Define event types in Customizing and restart the transaction.
how to define event to restart the transaction in BADI
I have given error message in badi. it is giving
No SAP Event Management communication for events; no event types def
Message no. /SAPTRX/ASC084
Diagnosis
You have not defined event types for the business process types.
therefore not possible to communicate event data to SAP Event
Management.
System response
The communication of event data is aborted.
Procedure
Define event types in Customizing and restart the transaction.
Hi Kevin,
What DataSource does your testalias refer to?
- If it is a custom DataSource, you must have created this custom DataSource also.
- If it is the default DataSource, you shouldn't have this problem in general...
In either case, you can try deploying your DataSource and/or DataSource alias together with your application:
http://help.sap.com/saphelp_nwce10/helpdata/en/45/07d2eeea3e0485e10000000a155369/frameset.htm
http://help.sap.com/saphelp_nwce10/helpdata/en/45/c82cd460a42e96e10000000a155369/frameset.htm
I hope that helps!
Regards,
Yordan
Similar Messages
-
After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal. -
The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.
Try below steps once
click Gear icon on the top Right corner and Quit Creative Cloud App
Click on Finder and then hold Command + Shift + G keys on your keypad
It will open Go to folder window, type exactly ~/Library and click on Go
Make sure to open ~/Library not /Library ( there will be two Library folders )
Then open Application Support > Adobe folders
Trash AAMUpdater and OOBE folders.
Then launch Creative Could and check. -
How do I use the commands to start and restart the jmqbroker normally?
How do I use the commands to start and restart the jmqbroker normally?
Because I have tried to use "jmqcmd shutdown bkr" and then tried to type
"jmqbroker" to start up. My screen hangs up and seems that the process
hangs up. The message is
[28/Jun/2002:18:29:07 GMT+08:00] [B1060]: Loading persistent data...
[28/Jun/2002:18:29:08 GMT+08:00] [B1039]: Broker "jmqbroker" ready.
The prompt is hanged until I press CTRL-C.
Then I got the following message:
[28/Jun/2002:18:32:07 GMT+08:00] [B1047]: Shutting down broker...
[28/Jun/2002:18:32:07 GMT+08:00] [B1077]: Broadcast good-bye to all
connections ....
[28/Jun/2002:18:32:07 GMT+08:00] [B1078] Flushing good-bye messages
[28/Jun/2002:18:32:07 GMT+08:00] [B1056] Cleaning up persistent
store...
[28/Jun/2002:18:32:07 GMT+08:00] proceessing 0 messages and cleaning
up 0 files...
[28/Jun/2002:18:32:07 GMT+08:00] [B1063] Done
[28/Jun/2002:18:32:07 GMT+08:00] [B1048]: Shutdown of broker complete.
Then, I use jmqadmin to invoke the console, I can start the broker
again, it gives me
Error encountered while connecting to the broker: "MyBroker":
Broker Host: 'localhost'
Primary Port: '7676'
[C4003]: Error occurred on connection creation, - caught
javax.jms.JMSException
Please verify that there is a broker running on the specified host and
port.
I used ps -def | grep jmq there is no process anymore.
Is it a bug? Would somebody have any idea on what went wrong?'jmqbroker' is the command to start a broker.
When you type 'jmqbroker' in a command window,
unless you put it in the background, the shell
prompt won't return until the broker is shutdown.
So when you see 'Broker "jmqbroker" ready.', it tells
you that the broker is running and is ready.
When you CTRL-C the process, it has the same effect
as using jmqcmd to shutdown the broker. And so after that,
there's no jmq processes running since you have just
shutdown the broker.
Remember that the jmqcmd/jmqadmin 'restart' command is to
restart an already running broker. jmcmd/jmqadmin does
not support starting a new broker instance.
If you are using csh, end the jmqcmd command with an ampersand ("&")
to have the broker running in the background. An alternative is to
stop the process with Ctrl-Z then input the command "bg" to have that
process resumed in the background.
The problem with not being able to start a broker using the
administration console is a documented limitation of the product that
Yvonne also mentioned. Check the Administrator's Guide for that. -
How to Stop and restart the OC4J_BI_FORMS?
I have Oracle AS 10.1.2.0.2 (Rel 2) installed. (Infratsructure & BI & Forms) on same computer.
my question is :
How to Stop and restart the OC4J_BI_FORMS?
Regards,
DNJust as any other OC4J:
opmnctl stopproc -process-type=OC4J_BI_FORMS
opmnctl startproc -process-type=OC4J_BI_FORMS
or
opmnctl restartproc -process-type=OC4J_BI_FORMS
cu
Andreas -
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?
-
Once I open a book in my library there is no option to close it and return to the library. I must leave the app, stop the app and then restart it. How do I exit an opened book to return to my library without having to exit, stop, and restart the app?
Assuming you are talking about "iBooks", then just
tap the center of the screen
and you should see a "Library" in the upper left corner of the screen.
tap the center of the screen again,
and you should return to full screen mode.
if this is NOT iBooks, then I do not know what controls that app -
when i plug in my ipod touch it goes to the battery witht he bolt under it the goes to the apple logo screen and after a while it will flash white like its trying to go to the lock screen but just restarts and restarts the process and keeps doing it. What should i do? Is there any way to fix it?
See if you missed anything here:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Video no longer plays from sites on comedy central. Site says browser must be updated, but I have installed all updates and restarted the computer..twice.
If it is any consolation this started happening to me today. I am in Toronto. I am wondering if there is a copyright issue here. I have done nothing to solve it - mostly because I suspect this has nothing to do with my computer.
p.s. My speculation about copyright is not correct. Comedy Central plays fine with Google Chrome. Have not yet tested Firefox. -
Yesterday i synced my music to my ipod touch from iTunes. the musice went on but nothing showed up on the ipod in the 'recently added' folder. now today i went to connect it to the laptop and neither my computer or iTunes recognized the ipod. 1st a message showed up saying an ipod was detected but cuddn't be identified so reconnect and when i did nothing showed up again. i have uninstalled and reinstalled iTunes and restarted the computer a number of times but the ipod still wont show up. Can anybody help?
Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Does the iPod charge?
Have you tried another cable?
Another computer to help determine if you have an iPod or computer problem? -
I just purchased a MacPro with 10.7.2 installed. I want to install 10.5 on a separate partition.
I created the partition with no issues, now when I put in the 10.5 install DVD and restart the computer, it does not restart.
All I get is a grey screen. no icons, no nothing. I have to shut the computer down.
I really need to do this. I plan on upgrading to FCP X, but I still need to finish some old projects that were done with FCP 7. I need the different boot drivesMac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD -
Problem description:
keyboard can’t type soe letters and relaces the with strange series of other letters. beachball all the tie. 16 gb rabcvxz . idk what to do. lease help0.
EtreCheck version: 2.0.6 (91)
Report generated October 25, 2014 at 3:36:04 PM EDT
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2012) (Verified)
MacBook Pro - model: MacBookPro9,2
1 2.5 GHz Intel Core i5 CPU: 2-core
16 GB RAM Upgradeable
BANK 0/DIMM0
8 GB DDR3 1333 MHz ok
BANK 1/DIMM0
8 GB DDR3 1333 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
Intel HD Graphics 4000 -
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 0:37:54
Disk Information: ℹ️
APPLE HDD TOSHIBA MK5065GSXF disk0 : (500.11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MACINTOSH HD (disk1) / [Startup]: 498.88 GB (475.08 GB free)
Core Storage: disk0s2 499.25 GB Online
MATSHITADVD-R UJ-8A8
USB Information: ℹ️
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/System/Library/Extensions
[not loaded] com.livescribe.kext.LivescribeSmartpen (1) Support
Launch Daemons: ℹ️
[running] com.livescribe.PenCommService.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
User Launch Agents: ℹ️
[loaded] com.littleknownsoftware.MailPluginTool-Startup.plist Support
[loaded] com.littleknownsoftware.MailPluginTool-Watcher.plist Support
User Login Items: ℹ️
LivescribeHelper Application (/Applications/Livescribe Helper.app/Contents/MacOS/LivescribeHelperAutoLaunch.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 600 - SDK 10.10
QuickTime Plugin: Version: 7.7.3
SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
3rd Party Preference Panes: ℹ️
None
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
13% Safari
8% parentalcontrolsd
5% WindowServer
1% com.apple.Safari.SearchHelper
1% launchd
Top Processes by Memory: ℹ️
155 MB Safari
103 MB mds_stores
103 MB Contacts
93 MB com.apple.WebKit.WebContent
86 MB Spotlight
Virtual Memory Information: ℹ️
10.43 GB Free RAM
4.80 GB Active RAM
696 MB Inactive RAM
1.24 GB Wired RAM
1.02 GB Page-ins
0 B Page-outsThanks, I'm typing this message from an external keyboard borrowed from one of my schools iMac. It is working fine so could this be a serious hardware issue? I upgraded the RAM from 4 gb to 16 gb thinking that would solve the slowness/beachball issue but it didn't. Could it possibly be a faulty SATA cable or time to upgrade my hard drive as well?
I'm feeling like this is beyond my reach and do not want to damage my MBP further. I'll shut it down and take it to the tech store on campus and hope they have mercy on my wallet. Thanks for the help. -
I am downloading the Creative Cloud desktop app on my Mac, and it starts to download but just stalls in the process and doesn't get any closer to finishing. Anyone have any suggestions. I've restarted my computer multiple times and restarted the download, but to no avail.
uninstall anything cc that's already installed, clean (Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6) and the reinstall, Adobe: Creative, marketing, and document management solutions
-
Have just installed Mavericks and restarted the MacBook Pro. That was 3 hours ago and after logging in, I got my wallpaper and dock, but none of my desktop icons, just the spinning coloured wheel. It's been like that for 2 hours. Is this normal? What should I do, please?
I tried holding the on/off switch down to make it shut down, but when I turned it back on again, the same thing happened and none of the keys etc makes any difference.
HELP!!!! Please.No, what you're experiencing is not normal.
Try booting whilst holding down the Shift key - this will allow you to boot into Safe Mode, disabling third-party kernel extensions, etc. Your Mac will be slow to boot and will operate sluggishly. That's normal. If you can get in using Safe Mode then you have some start-up item that doesn't play well with Mavericks.
Call back,
Clinton -
My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!
I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US
Maybe you are looking for
-
Laserjet 4650 tray 1 envelopes printing instead of letter paper
I am working at a small office which has an HP CLJ 4650 printer. It is connected to the network with an Ethernet cable and shared from the Windows 2008 SBS server. The clients are WIndows XP Pro SP3 and Windows 7 Pro SP1. The problem we are experienc
-
Create shipment cost - tax code error
Hi All, I'm using transaction VI01 to create a shipment cost document. The vendor is flagged for ERS. When I try to save the shipment cost document with transfer selected to automatically create the PO, I get this message. "No purchase order item was
-
I must be doing something stupid: Very poor quality DVD rendering!
I am new to Apple products and after trolling this forum, I was able to create a DVD using iDVD on my Mac mini Core Duo - 2Ghz model. But, the video is of very poor quality (compression artifacts). I am lookging for guidance to creating a better vide
-
Podcast page on site does not load after several years.
There seems to be some kind of code glitch that I hope someone can explain or show me the way to go. Here is what I get when I try to load the podcast page on the web: # Exception: TypeError # Message : Value undefined (result of expression $ ( paren
-
I find that using MAC system, open the safari connect to the Internet, a normal open webpage speed is very slow, what is the reason?