Define Number Assignment for Goods Receipt/Issue Slips

Hi Experts,
please can you help in the creation of manual creation of transport request for the customizing activity "Define Number Assignment for Goods Receipt/Issue Slips": settings for assigning goods receipt/issue slip numbers upon goods movements (MM) or deliveries (LE-SHP)?
Customizing for this functionality is composed by the following points:
1. functionality activation at plant level
2. number range group/interval code assignment
3. Groups and intervals creation
4. Plant / Storage Location / Movement type combination assignment to number range group.
Customizing request is automatically created for points 1, 2, 4, but NOT for point 3 where you have to create Groups, Intervas and assing each others.
You receive a message from SAP that you have to insert the relevant object manually into transport request.
Please can you tell me exactly what I have to put into transport request as object:
- Program ID (I think R3TR)
- Object Type
- Object name
and any other relevant information with all the details.
Thank you very much
Kind Regards
Andrea.

Hi
You need to create the transport request by selecting the required number & clicking on the trnsaport icon, then a prompt for transport request will be displayed, there you can create the request & move it to production.
Reward points if usefu;
Thanks & Rgards
Kishore

Similar Messages

Define Number Assignment for Material and Phys. Inv. Docs

Can we give number range for Goods Receipt, goods issue, physical inventory document and Invoice verification document year wise??
Suppose for 2011 no range 490000 to 499999
2012 no range 500000 to 599999
For all the documents(GR, GI,TP, IV)???/

Hi,
Yes, You can set number ranges based on year basis for GR & GI.
Check the link for setting number ranges for material document & accounting document.
Number range for trans./event type WE in year 2011 does not exist
Regards,
Biju K

Incorrect number range for good receipt (WE)

Hi,
We have a number range defined for goods receipt document WE for the year 2010.
Now wehn i posted a good receipt on 06th January,2010 material document was generated with other number range (defined for year 9999) instead of tat defined for year 2010.
Can any one plese help us understand why it is not picking up number range for year 2010 ?
Thanks.

Go to OBA7, select the document type WE and execute. There check what number range object is assigned. Next go to FBN1, key in company code and execute. There ensure that for the same object, number range is maintained for the year 2010 also.
thanks
G. Lakshmipathi

Number range for Goods receipt against Purchase order

Hi All,
Please help me with the transaction code of creating new number range to receive goods for the new year.
Message is Number range for trans./event type WE in year 2010 does not exist
SAPXPT

OMBT click on the groups button, select the
Material documents for goods movements and inventory diffs.
WA WE WF WH WI WL WO WQ WR WS WV WW WZ
And then select the maintain icon, you need to maintain the number range
for the year 2010.
ands OMBA for accounting finance doc number range
hope this helps

OMBA: Define Number Assignment for Accounting Documents

Hello exparts,
I ask about operation in "Allocate document type to transaction" at t-code OMBA.
Can we insert new entries?
If yes, please tell me how to.
Thank you and regards.
Emma S

Hi
There is a posibility that someone should have tried entering the number range assignment and missed the storage location during this activity
regards
Jagadish

Print programs for Goods Receipt, GI, ST, Subcont. TP, Consignment TP ...

Hello Gurus,
There is a Business requirement to have a separate print forms for every Inventory transactions like Goods Receipt, Goods Issue, Stock Transfer, Sub-Contracting Transfer Posting, Consignment Transfer Posting, etc.
We need to use the Transaction MB90 to print all the Inventory documents.
While checking the Output types, we find that basically WE03 is for Goods Receipt (Collective Slips) & WA03 is for Goods Issue / Transfer postings (Collective Slip)
I would like to know that inorder to assign a different Smart Form & Program (One for each of the transactions listed above) to the output types, is there a way around to work with these 2 Output types & have the 5 different Smart Forms - Programs assigned to these 2 Output types or do I need to create a copy of these output types & use them instead, one output type for each Smart form - Print program combination
Regards,
Zafar.

First, you can maintain PRINT ID in the IMG for each movement type 
Second, you can create multiple OUTPUT TYPE - one for each.
Third, in MN21, create ouotput records using a combination of OUTPUT TYPE and PRINT ID
 
Example:
GR movement types 101, 105, etc, you can have PRINT ID 1 and OUTPUT TYPE Z001
GI movmeent types 201,261, etc. you can have PRINT ID 2 and OUTPUT TYPE Z002
 
Configure PRINT ID: IMG path: Materials Management > Inventory Management and Physical Inventory > Print Control 
Configure OUTPUT TYPE: IMG path: Materials Management > Inventory Management and Physical Inventory > Output Determination

Goods Receipt Collective Slip for Mat Doc is not printing

HI All,
I have a strange issues. I'm trying to print collective slip for Goods Receipt which is created against of PO.
I able to print Individual Slip when i create GR(Mat Doc) against PO with movement type 101. But I'm not able to print the Collective Slip when I create GR(Mat Doc) against PO with movement type 101. I'm saving the GR document by selecting collective slip. Error I'm getting is "The system could not create Output".
I check the condition records in MN21, condition record is in place.
I check in OMB5, for movement type and material document configuratio its there.
I check in NACR, condition record is there.
I found that In table NAST, entry for GR document created using collective slip is not available, but Individual slip GR Doc entries are there in NAST table.
any help on this matter is highly appreciated.
I check in SDN, Googled it, but no result.
Thanks in Advance.

check this
2. Before you set up the output determination, you have to run the program RM07NCUS for each client in which you want to use the output determination function.
This program copies the basic settings from the SAP standard client (000).
from there:
http://help.sap.com/saphelp_46c/helpdata/en/ed/6cec6eb435d1118b3f0060b03ca329/content.htm
and check you have define some printer for the output.

Standard smartform for Goods receipt slip version 3

Hi all,
I need to copy and modify a smartform for Goods receipt slip.
How do we find out the main program(driver program) for a smartform.
In my case the smartform name is /SMB11/MMGR3_A
Regards,
Kaushal

I used /SMB11/BL_MMGR1_L in my choice and I then searched programs using /SMB11* until I found something that looked like a match in it's text.
I can only tell you that after configuring via tcode NACE application ME and output type WE03 (because again the text matched what I was wanting to do) with program /SMB40/M07DR it did give me the results I wanted. This is a specific answer and NOT the more general answer you might have really wanted. There is much discussion in forum for that more general question. Personally until SAP sees the wisdom of maintaining a table to make a more direct search key more possible rather than a full SAPSCRIPT, SMARTFORM, PDF search we have some agony to endure.
Now if can you tell me where (table & fields) number of containers found on tabstrip Quantity of tcode MIGO is stored and we can call this even.
GOITEM-ANZGEB is NOT the answer I want to hear as structure names do not count and it is not defined in any structures of the global settings.
Good Luck!!!

Serial number optional at goods receipt but mandatory at goods issue?

How can we make serial number optional at goods receipt but mandatory at goods issue?
Thanks in advance for the answers....

Hi,
Not in front of the system, but if i remember correctly one of these enhancements has a check on serial numbers,
1. User exit -> MBCF0002
2. BADi -> WORKORDER_GOODSMVT or MB_DOCUMENT_BADI
Check & revert if it meets your need.
Regards,
Vivek

Create serial number - asset from goods receipt

Hi,
We configured the sync functionality between PM and AA, so when we create a serial number via transaction IQ01, the fixed asset master data is created automatically. We also configured the serial number profile in the material master. When we create a goods receipt (MIGO) the serial number data screen comes into place. We save the GR document, and when we check the serial number data in PM this info is correct, but the synchronization between fixed asset didn't work it means, no asset master data is created. Is there some missing configuration? Even the tcode IQ01 works fine, why in this operation (MIGO) the configuration doesn't work ?
Any help on this topic we'll be very appreciated.
Lee

Hi,
in customizing transaction OIS2 I'm using the serial number profile 0010 (Stock check) and in the serializing procedure Goods Receipt and Issue Doc (MMSL), the serialization usage is 03 and the equipment requirement is 02 (always with equipment). When use MIGO for goods receipt I noticed that after the serial number creation (via tcode IQ03) some serial number mandatory fields have no value, like Company Code (BUKRS) and Cost Center (KOSTL), and other mandatory fields for the master records. If I modify the serial number (tcode IQ02) and complete the mandatory fields, the synchronization work fine since the asset master record is created. I'm suspecting that some of these fields (like company code) are necessary for the asset creation. I checked the whole PM/AA/MM configuration for these fields to in some way, assign them the corresponding value taken from the goods receipt or material and give it to the serial number record for creation. If you know something else please let me know.
Thanks for your response.
J.R.Lee

Create serial number - asset from goods receipt (MIGO)

Hi,
We configured the sync functionality between PM and AA, so when we create a serial number via transaction IQ01, the fixed asset master data is created automatically. We also configured the serial number profile in the material master. When we create a goods receipt (MIGO) the serial number data screen comes into place. We save the GR document, and when we check the serial number data in PM this info is correct, but the synchronization between fixed asset didn't work it means, no asset master data is created. Is there some missing configuration? Even the tcode IQ01 works fine, why in this operation (MIGO) the configuration doesn't work ?
Any help on this topic we'll be very appreciated.
Lee

Hi,
in customizing transaction OIS2 I'm using the serial number profile 0010 (Stock check) and in the serializing procedure Goods Receipt and Issue Doc (MMSL), the serialization usage is 03 and the equipment requirement is 02 (always with equipment). When use MIGO for goods receipt I noticed that after the serial number creation (via tcode IQ03) some serial number mandatory fields have no value, like Company Code (BUKRS) and Cost Center (KOSTL), and other mandatory fields for the master records. If I modify the serial number (tcode IQ02) and complete the mandatory fields, the synchronization work fine since the asset master record is created. I'm suspecting that some of these fields (like company code) are necessary for the asset creation. I checked the whole PM/AA/MM configuration for these fields to in some way, assign them the corresponding value taken from the goods receipt or material and give it to the serial number record for creation. If you know something else please let me know.
Thanks for your response.
J.R.Lee

Steps For Goods Receipt For Work Order Using Handling Units

Hello MM gurus,
I'm new to HU Management. Can you please share with me the steps for executing a "Goods Receipt For Work Order" using Handling Units?
I created a HU (1000000026), and then using transaction COWBHUWE I tried using that HU to create a goods receipt, but I keep getting the message below:
Handling unit 1000000026 is not provided for goods receipt
Message no. VHURM046
Do you have to assign/plan HUs to Process Orders first? I think the problem is that I'm not understanding the process or the requirements for a goods receipt for work order using HU.

Hello Manish Kumar,
I've been doing Handling Units testing in our sandbox environment and I've been trying to Pack a Finished Product for a Process Order using
1-Transaction code HU02 to create the Handling Unit
2-Transaction COWBHUE after creating the HU to enter the production order number and the HU number and propose it, but the it doesn't work. When I propose it, nothing happens.
3.-I also tried COWBPACK, but for some reason, when I go into COWBPACK, key in the Process Order, and then press enter, I get the following message:
You do not have authorization to create handling units for plant BP08
Message no. VHUPD500
Do you know how to solve this issue?

Menu path - for goods receipt for purchase order (MB01)

Hi
What is the menu path for Goods receipt for purchase order (MB01) - ECC6.0

hi
the path is too deep
plz just log in ur system and find MB01
Materials Management > Purchasing > Master Data > Subsequent Settlement > Vendor Rebate Arrangements > Environment > Condition/Arrangement > Environment >Pricing > Environment Value assignment > Inventory management > Goods receipt >For purchase order > MB01 - PO number known
regards
KI

Goods receipt / issue form

Hi :
Is there any standard smartform for Goods receipt / Goods issue slip ?
How to create a customizing form using smartforms when a material document is created and saved .
Thx.
Raghu

goto NACE Transaction and click on application v2 and click on output types and name itself you will find out.
Reward Points if it is helpful
Thanks
Seshu

No transfer exists for goods receipt reference(From ECC to SNC )

Hi All,
We are facing one issue in ECC and SNC while transferring Goods Reciept Information to SNC via ECC.
We recieved ASN information from SNC and did Goods Reciept against ASN via Inbound delivery.
Now when we used the report RSMIPROACT to transfer Goods Reciept Information it is giving message
"No transfer exists for goods receipt referenc".
I did all setting like
I ticked check box for Goods Reciept Reference and Delivery03.
Source list is maintained and also Message type STPOD is configured for Logical system.
Please can some one help me in telling me why system is not selecting any PO for transfer of GR information even tough Goods Reciept is done for PO.
OR
Is there anyotherway where we can send the Goods Reciept Information from ECC to SNC
Thanks and Regards
Raghavendra Pai

Hi Raghavendra ,
Make sure in We20 following setting is required:
Go to your partner type LS (logical system) and create outbound parameter:
Message Type:STPPOD
Receiver Port:<Your port number> which connects to PI from ECC
Transfer IDoc Immed checked with Output mode=2
Basic type:DELVRY03
Checked Cancel Processing After Syntax Error.
No other setting is required in above outbound parameter.
Go to RSMIPROACT report
You need enter following data:
1)Plant
2)MRP area of plant
3)If want for all material then enter * or enter list of materials
4)Enter target system (SNC system)
5)checked only Goods receipt Reference
6)In execution parameter select Update run radio button
7)Log select log complete report
8)IDoc type DELVRY03
Lastly main thing is GR date enter GR date.
When you execute RSMIPROACT report you will get this message "No transfer exists for goods receipt reference" then it will ask whether you want to change your selection click on NO.
Now check whether IDoc is got triggered or not?
Let me know for any clarification.
Thanks,
Nikhil

Define Number Assignment for Goods Receipt/Issue Slips

Similar Messages

Maybe you are looking for