Define URL in CCM 2.0 catalog

Dear Experts,
In our CCM2.0 ,
We have define the field CCM/PICTURE with the URL for picture of the product
We would like to add a second URL for more information of the product ,
We have search for a field that can be set to this URL but could not find any.
Please advise your Idea.
Regards,
Moshe

Hi Moshe
I am not sure what you are looking to populate in this field, the characteristic for picture is normally defined with type /CCM/ATTACHMENT which expects 3 specific data type components, these are description, URL and MIME type.
These concatonate to make the URL for accessing the mime you wish to display, these normally link to jpg images as this is the most common mime type used in catalog management.
So what are you trying to fill in here and what do you expect to see in the 'preview' frame?
Regards,
Jason

Similar Messages

CCM 2.0 Catalog to SRM-MDM 3.0 Catalog during SRM 7.0 upgrade

Hi,
We are upgrading our existing SRM 5.0 system to SRM 7.0 and we are planning to deploy SRM-MDM 3.0 Catalog as it is more flexible & SAP is not going to support CCM 2.0 Catalog after 2013. Please let me know the upgrade steps/plan to upgrade CCM 2.0 to SRM-MDM 3.0 catalog. As per my understanding, there is no tool/method available to upgrade from CCM 2.0 to SRM-MDM 3.0 catalog available. We need to build it from scratch i.e maintain SAP supplied MDM repository, upload data from SRM/ERP, upload suppliers catalog etc.
Thanks,
AS

Hi,
I have migrated CCM to SRM-MDM Catalog.
Steps are
- Install SRM-MDM Catalog
- Adjust Repository if you have custom fields
- Import contents
- Adjust view
Migration itself is not difficult but you need to learn how to use MDM client tools.
The SRM270 class room training is good one.
http://www.sap.com/usa/services/education/catalog/globaltabbedcourse.epx?context=%5b%5bSRM_SRM_NA%7cSRM270%7c%7c%7c%7cUS%7c%5d%5d%7c
Regards,
Masa

CCM 2.0 Catalogs with Images

When trying to load a catalog using CCM 2.0 the system stops at the colum with the images at the first line. Each of the pictures and or URLs are valid...any suggestions on what may be causing this?? Thanks
Here is what the header in the colum for the images looks like in the data file.
Characteristic 14
Picture#/ccm/url

Hello,
What do you mean by format?
We have the same problem.
Our characteristic 14 is:
PICTURES#/CCM/URL
We also put characteristic 13:
PICTURES#/CCM/DESCRIPTION
Any idea?
Thanks a lot,
regards,
Caroline

CCM - Publishing Master catalog gives short dump and terminates publishing

Hello Experts,
we are implementing SRM 5.0 with CCM 2.0 in SP08.
When we tried to publish the master catalog in CCM. we are getting the following error.
FYI..
i ran /CCM/initialize_cme once.
Checked TREX it is working fine. (checked with reports as well)
Your help will be greatly appreicated.
Thanks, Renga.
-========================================================-
Data type 4688C4C9FE4702CE00000000AC140239_ 0000000001 does not exist
Data type not found
Data type not found
Unable to initialize the characteristics/data types (catalog /CCM/MASTER_CATALOG)
Error when generating catalog /CCM/MASTER_CATALOG
Catalog update was terminated
Error when generating catalog /CCM/MASTER_CATALOG
Publication in target system was discarded
Exception /CCM/CX_PUBLICATION_FAILED occurred (program: /CCM/CL_PE_PACKAGING_SERVICE==CP, include: /CCM/CL_PE_PACKAGING_SERVICE=
Exception /CCM/CX_PUBLICATION_FAILED occurred (program: /CCM/CL_PE_REQUEST_SERVICE====CP, include: /CCM/CL_PE_REQUEST_SERVICE===
07/03/2007 13:45:01 (EST): Catalog publication was started
Publishing catalog /CCM/MASTER_CATALOG for the first time
Publication will only be local
Maximum package size (catalog items): 5000
07/03/2007 13:45:02 (EST): >>> Start: Publication of catalog model
07/03/2007 13:45:03 (EST): Data types published; 25 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Characteristics published; 35 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Schemas published; 1 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): Categories published; 313 updated/created; 0 deleted
07/03/2007 13:45:03 (EST): >>> End: Publication of catalog model
07/03/2007 13:45:03 (EST): >>> Start: Publication of catalog content
07/03/2007 13:45:03 (EST) ************ Start Applications Log for Package 0001 *******************
07/03/2007 13:45:03 (EST): Package 0001 is being transferred to Update Manager
07/03/2007 13:45:03 (EST): Package 0001 is being updated locally
Catalog update was terminated
07/03/2007 13:45:05 (EST) ************* End Applications Log for Package 0001 ********************
07/03/2007 13:45:05 (EST): Package Nr. 0001 was sent
07/03/2007 13:45:01 (EST): system is waiting for response messages
07/03/2007 13:45:04 (EST): >>> Start: Processing of confirmation message for package 0001
Local update of package 0001 has failed
07/03/2007 13:45:04 (EST): >>> End: Processing of confirmation message for package 0001
07/03/2007 13:45:04 (EST): >>> Start: Processing of confirmation message for catalog
Local publication of catalog /CCM/MASTER_CATALOG has failed
07/03/2007 13:45:04 (EST): >>> End: Processing of confirmation message for catalog
07/03/2007 13:45:05 (EST): End of catalog publication
Total runtime of catalog publication: 00:00:04 ***
-========================================================-

Hi
<b>Please go through the SAP OSS Notes below -></b>
Note 866547 Error when accessing TREX server
Note 878316 - Missing standard characteristics in CCM2.0 catalogs
Note 910814 Lowercase letters in ID
Note 734168 - Error during initialization of characteristics & data types
Note 730047 CME-Customizing check
Note 937756 Runtime improvement when using view rules
Note 933796 Timeout while publishing using parallel processes
Note 904420 Tolerating inconsistencies in the view relationship
Do let me know.
Regards
- Atul

How to get prices from CCM 2.0 catalog

Hi guys,
I configured y populated a Purchasing Catalog in CCM 2.0
Everything seems to work alright when I downloading a material from the catalog in to a Shopping Cart except the price of the material!
The field price: "/ccm/amount" - Importe - is populated with OCI field: NEW_ITEM-PRICE
The field: "/ccm/currency_code" is populated with OCI field:
NEW_ITEM-CURRENCY
Upon transferring the OCI values into the Shopping Cart, in the transaction SLG1 , object string "BBP_OCI", shows only trafficlight in green! It doesnt mention the OCI field NEW_ITEM-PRICE.
What Im I doing wrong? Maybe some configuration missing?
Thanks for any help,
Aart

You mention "product", is this a SAP Product master item? If so the price would come from the product master in commpr01?
If this is not the case your description of the config looks correct. You should be passing the value of the characteristic /ccm/amount to the OCI price field.
This should work easily.
Other things to check - formating of numeric price?
Are you certain "price" is maintained in this characteristic value?
b

CCM - Error Adding Catalog Items Approver

Hi all,
i'm working with CCM 2.0 on SRM 5.5, and i'm facing the following problem:
when i try to add an approver for master catalog clicking on "add new approver" button,
il Assigned Approvers an empty row (only date field is filled).
If i try to insert a User ID in "User Name" field and save the data, the following error appears:
<i>SAP Note
The following error text was processed in the system:
      An exception with the type CX_SY_DYN_CALL_ILLEGAL_TYPE occurred, but was neither handled locally, nor declared in a RAISING clause
Exception Class     CX_SY_DYN_CALL_ILLEGAL_TYPE
Error Name
Program     CL_BSP_MODEL==================CP
Include     CL_BSP_MODEL==================CM00Q
ABAP Class     CL_BSP_MODEL
Method     IF_BSP_MODEL_UTIL~CONVERT_FROM_STRING
Line     122
Long text     An actual parameter should be assigned to the formal parameter 'DATA' of the method 'INSTANTIATE_SIMPLE_DATA' of the class 'CL_BSP_UTILITY', even though the formal parameter is read-only. For this reason, youmust ensure that a field symbol is protected against changes if the field assigned using the ASSIGN statement is protected.</i>
No short DUMP in ST22 neither Errors in SLG1....
Someone knows a solution to this problem?
Thanks a lot!!!
Lorenzo

Here's the answer.
In SE80, choose Class/Interface /CCM/CL_BSP_SCHEMA_MODEL, then under Atrribute double click GT_ASSIGNED_APPROVER. Then on the Attributes tab untick the read only flag for attribute GT_ASSIGNED_APPROVER for associated type /CCM/T_APPROVER .
Regards
Keith

Accesing url idle ccm 5.1: where upload the image file?

Hi,
I'm trying to work the url idle feature in ccm 5.1.
The phone gets the message error http (404).
I have the default configuration on the enterprise parameters of the callmanager and I have upload the xml image file in the tftp directory and in a ccmcip directory, but it doesn't work.
Where must I upload the image file or why it dosn't work?

You can try this link for Idle URL timout
http://cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml

IDLE URL on CCM 5.0

Hi all
Do you know how to get my .xml file into CCM 5.0 to get it dispayed as IDLE URL? It was working back in 4.1(3).
How can acomplish this?
Thanks in advance for any help

Hi Javier,
Perhaps this is what you are looking for;
Uploading TFTP Server Files
You can use the Upload TFTP Server File option to upload various files for use by the phones to the server. Files that you can upload include custom phone rings, callback tones, and backgrounds. This option uploads files only to the specific server to which you connected, and other nodes in the cluster do not get upgraded.
To upload TFTP server files, follow this procedure:
Procedure
Step 1 From the Cisco Unified Communications Platform Administration window, navigate to Software Upgrades>Upload TFTP Server File.
The Upload TFTP Server File window displays and shows a listing of the current uploaded files.
Step 2 To upload a file, click Browse and then choose the file that you want to upload.
Step 3 To start the upload, click Upload File.
The Status area indicates when the file gets uploaded successfully.
Note If you want to modify a file that is already in the TFTP directory, you can use the CLI command file list tftp to see the files in the TFTP directory and file get tftp to get a copy of a file in the TFTP directory.
From this CCM 5.0.2 doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080636089.html#wp1017196
Hope this helps!
Rob
Please remember to rate helpful posts.....

How to stop multiple windows being opend when searching CCM 2.0 catalog

Hi There,
When one accesses the catalogue using the SHOP - CATALOG<link>, a new window is opened. If after searching a list of items is displayed in yet another window!. How can we prevent mulitple windows being opened?
Also we have noticed that if we search the catalogue and add items to our shopping cart, when you go back to search the catalog, the last list of items is presented again. Is it possible to always display the "main" catalog page and not the last list of searched/found items?
Regards,

Hi Grace,
I can help you partially.
I think both of your problems are related to diff parameters of Integrated call structure which we define in
SRM IMG->SRM->SRM server->cross applns->Master data->Define external web services.
self service procurement config guide talks in detail how to maintain this integrated call structure.
also you can check on help.sap.com
BR
Dinesh

Pls. help - How to use user defined URL?

The page users access currently for login is (only over the Intranet)- http://servername/pls/portal30/url/page/pagename
I need users to be able to point to - http://project.companyname.com/project
and be taken to the above Login page.
What needs to be setup (Apache/Portal)??
I created a Virtual Hosts entry in the httpd.conf file -
NameVirtualHost 13.xx.xx.xxx
<VirtualHost 13.xx.xx.xxx>
ServerName project.companyname.com
</VirtualHost>
That did not help. What am I missing?
Thanks.

ATP,
Pls. refer Portal FAQ. Here is how it works
Use the Apache Redirect directive in the <ORACLE_HOME>/Apache/Apache/conf/httpd.conf file. For example, if your site's full URL is http://mysite.us.oracle.com:80/pls/portal30, you can place the following directive in httpd.conf:
Redirect /portalhome http://mysite.us.oracle.com:80/pls/portal30
Then, if you try:
http://mysite.us.oracle.com/portalhome
you will be redirected to the original URL. This technique will also work with any valid path that is appended to the URL. For example:
http://mysite.us.oracle.com/portalhome/url/folder/ONLINE_HELP
will redirect the user to the Online Help content area.
null

Elimination of screens for shopping with CCM catalog

Hello CCM seniors,
We have installed CCM 2.0 as an add on for SRM 4.0.
CCM and EBP are mountd on same server and same client.
CAT and CSE also share single client.
EBP to CCM integration is working fine.
i.e. user can select catalog items and can make shpooing cart.
Only when employee clicks on the catalog link(/ccm/master catalog in our case) in EBP portal ,
on the next screen he has to click on "Locale- EN" to proceed.
Since we are not using any language versions , we want to eliminate this screen for operational ease.
Also, as our catalog is SRM extracted one and the there is only one category, we want to avoid the next screen also
i.e. selection of subcategory to display the list of items.
To summerise what we are trying to achieve is that when the employee clicks on the catalog link in EBP -> shop application ,
he should directly get the list of items from the catalog.
Is it possible, if yes how?
Thanking in advance for yr attn.
BR
Dinesh

Hi Vadim,
thanks for yr reply.
But i could not interpret it fully.
As per yr recommendation i am only focussing for elimination of the locale screen.
I am pasting my intergrated call structure.
Can you suggest the chagnges so that I can give you full points?
(I have already given some.)
10             http://dqsrmcom5507.timesgroup.com:80/sap/bc/bsp/   ccm/srm_cse/main.do                           URL
20     ccm-user     sisldineshp           Fixed Value
30     password     GAJANAN                   Fixed Value
40     SAP-CLIENT     200                   Fixed Value
50     SAP-LANGUAGE     SY-LANGU           SAP Field
60     locale             English                   Fixed Value
80     catalogid     /CCM/MASTER_CATALOG   Fixed Value

Images in CCM 2.0 - use of URL MIME

Hello,
Im working with images in a CCM 2.0 Catalog and I want to use the URL MIME in the catalog instead of using the url directly in the positions of the catalog.
It is not working.
Before (when the images were visible)
URL MIME:    no value
/CCM/DESCRIPTION -   router test
/CCM/URL                 -   http://dessrm.entel.cl:8010/sap/bc/bsp/ccm/public/Router.jpg   /CCM/MIME_TYPE    -    Router.jpg
After (when images are not visible)
URL MIME:     http://dessrm.entel.cl:8010/sap/bc/bsp/ccm/public/
/CCM/DESCRIPTION -   router test
/CCM/URL                 -   Router.jpg
/CCM/MIME_TYPE    -    Router.jpg
What did I forget?
Thanks for any input.
Aart

Thanks guys,
But my problem is that in the first case I mentioned, I can see the picture, with the MIME_TYPE field filled with "Router.JPG".
Only when I try to make changes to the URL, trying to use the generic URL MIME of the catalog (situacion 2), it does not work.
Thanks,
Aart

How to change an existing line item in CCM catalog using CSV file?

Dear All,
We are using SRM5.0 and CCM 2.0
We have uploaded the material and service master to CCM as supplier catalog from R/3.
The initial Upload was doen successfully.
My query is how to reflect the delta changes in CCM happening in R/3?
If I can generate a CSV file with all those items wich has been changed (Changes can be in description, Plant, status etc) and upload the same file in CCM, will it update the existing line in CCM or create a new line item?
How do i update an existing line item in CCM catalog using a CSV file?
Thanks
Abhishek

Hi Atul,
I am using CCM 2.0 and SRM 5.0 (EBP5.5).
We are not using XI, so i guess we cant use the program "/ccm/file_upload".
we have migrated the product master data from R/3.
We have developed a report which takes product category as input and gives out flat file in csv format containg all the items in that prod category.
Then we upload the file in CCM by logging thro the brpwser.
Similarly, i can develop another program which will give me a CSV file foll all those items changed in R/3 in a day.
Then we can upload that file in CCM.
But i have doubt if it will update the existing items in catalog.
Hope I could make myself clear.
Thanks
Abhishek

How to define new host in catalog?

Hi guys,
I have migrate 9R2 database to new host location and i wanted to run backup using same script which worked on old host but i get error :
Wed Dec 8 13:59:13 CET 2010
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> #
2> # Full Backup
3> #
4> # Recovery Manager script
5> #
6>
7> #connect target sys/xxxyyy@dev;
8> connect target "/";
9> connect CATALOG rman/catalog@oemrep;
10>
11> run {
12> backup database plus archivelog delete input ;
13> report obsolete;
14> delete obsolete;
15> crosscheck backup;
16> delete noprompt expired backup;
17> }
18>
19> exit;
connected to target database: DEV (DBID=1703379406)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-04004: error from recovery catalog database: ORA-12154: TNS:could not resolve service name
Recovery Manager complete.
Is this means that i need to define new host location in RMAN CATALOG or what?

You are right!
But still i receive this
Wed Dec 8 14:49:47 CET 2010
Recovery Manager: Release 9.2.0.4.0 - Production
Copyright (c) 1995, 2002, Oracle Corporation. All rights reserved.
RMAN> #
2> # Full Backup
3> #
4> # Recovery Manager script
5> #
6>
7> #connect target sys/xxxyyy@ssl21dev;
8> connect target "/";
9> connect CATALOG rman/catalog@oemrep;
10>
11> run {
12> backup database plus archivelog delete input ;
13> report obsolete;
14> delete obsolete;
15> crosscheck backup;
16> delete noprompt expired backup;
17> }
18>
19> exit;
connected to target database: SSL21DEV (DBID=1703379406)
connected to recovery catalog database
Starting backup at 08-DEC-10
current log archived
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 12/08/2010 14:49:48
RMAN-06004: ORACLE error from recovery catalog database: RMAN-20001: target database not found in recovery catalog
Recovery Manager complete.
So prorbably old host database has different DBID defined in RAN catalog?

Add pictures to CCM Catalog

Hi Experts,
Please advise how we can add pics to the materials in the CCM 2.0 Catalog,
Does it has a mass program for the uploading?
Regards,
Moshe

Hi Moshe,
Kindly refer below thread.
Use of Pictures/Images in CCM 2
Hope this helps:).
Regards,
Vikas

Define URL in CCM 2.0 catalog

Similar Messages

Maybe you are looking for