Delay with video
on the ipod when i watch a video, after about a min it hangs then no sound, if i jump frames the sound come back for a min then goes away, after playing with it like that for 10-15 minutes it usually fixes itself, what is the problem? how do i fix it?
ma147ll/a ipod 60gb
Are these ITunes purchased videos or videos you converted? If they were converted videos what software was used? What IPOD software version is installed on your IPOD?
Similar Messages
-
when I video chat with other apple users there is a time delay of 3 minutes. I can hear them speak, but it's not coordinated with their mouths. They say they get a 2 second delay. I use comcast & wonder if the problem lies there. They all have Mac OS 10.5.4 also. I also use time Capsule & wonder if that could be part of the problem.
Joani have a very similar problem with my ichat. it just started this year. The other user sees me fine, but i see them with a delay that seems to get bigger and bigger as the chat gets longer. I have tried wirelessly connecting to my airport extreme as well as hard wiring and it didnt change anything. i set the bandwith limit to 500 and the streaming speed to 1.5 mbps. i have comcast cable internet with a download speed of about 800 kb/s-1 mb/s, so i dont kno what to tell you. Maybe you have an obsolete computer. I have a suspicion that mine are messed up because i am on a power pc g5 and my friends or all on intels but who knows.
-
Ichat Video Quality pixelated and very delayed with friend on a Dell
I am on a Imac and have Airport express, but when I chat with my friend on a Dell, my video is pixelated and delayed. I talk with other friends on PC's and the quality is fine.
Add me to this problem. My powerbook G4 (10.4.10) can initiate with a mini G4 with isight (10.5.2) and be perfect in sync with video and audio. But if the mini initiates the chat a very long delay happens between voice and video. I also have an Ibook with 10.4.11 and when chatting with PB G4 are perfect, this applies to an intel imac with 10.5 only, ichat works fine. I think Ichat got affected with 10.5.1 or 10.5.2. I did noticed that if I open QT pro and make a recording(on mini), the actual caption is delayed but play back is ok. I have been playing with the QT preferences but does not seem to work. I saw there is a new update 10.5.3, and it includes so ichats update. Will keep posting. Pedro PS this is all in my home network. TWCNYC with 9600 kbps download and 488 kbps upload.
-
ITunes with videos bad, Music & Regular! Crash, Black Screen, Tagging?
So i have been using iTunes for ages and have been collection Music's CD's longer and i got to load them to iTunes a while ago. Music works great in iTunes but with my CD's i often got music video's included so i tried to play them and some regular videos in iTunes and got the following problems and issues (Almost all the tested video files was optimised for iProducts (All MP4 format)) :
Can't use some of my music videos (mp4 format) in itunes but i can in Quicktime (Got black screen but good sound ). I have no idea how they coded iTunes but shouldn't they use the same codec's?.
iTunes have a tendency to crash if i play music videos in a row. (Like to use random in a music video list, calming in the background. i know it's kind of excessive but i like it).
Sometimes i need to play through a music video then reverse back to it to get a picture. (Sound works great tho) .
Laggy! Sometimes the sound get out of sync with video and vice versa. (Usually the beginning. Has a tendency to catch up but not always, sometimes a middle lane in the video freezes.)
Can't you tag or sort video files better.? My computer sometimes crashes or get changed so i need to reinstall my media library from a backup. It would immensely help if i could ID3 tag media files the same way i can song so they automatically sort in to music video's, movies and Tv-series (media types!) without forcing me too change it in the advance tap at show more information. (This is off topic but i need this for audiobooks too (iTunes don't got my type of books so i am manually coping them from CD to MP3 format and transferring them to my iPhone))
So i'm a trial and error person so i worked a little bit with the problems when i had the time and when finally got somewhere and had some real questions so i created this profile and wrote this post.
Please read the whole post before you go yelling: -Look at this!, Already Asked!, See this forum! It's your computer! I usually get to the point somewhere on this post. At the bottom of the post i have my current specs for my computer. So here comes the wall of text:
I started with this http://support.apple.com/kb/TS1718?viewlocale=en_US and http://support.apple.com/kb/TS1717 which is what you get if you search a bit in apple's support site. Tried all the things there. Disabled Direct3D, Tried Safe Mode On (Note: These two made the performance worse not better.), Checked display colour quality (Maxed), Turned on DMA, (A slight improvement still issues.) and finally got to ReadyBoost. I have all my media on an external drive (Aha you says!) and yes i finally figured out that iTunes can't handle files of that size from a regular external (Observe i do not have ReadyBoost on my 1T drive, It says it don't have the necessary performance). So i moved my video files to my internal drive and it significantly improved in problems 2,3,4 (Not gone!), Also noticed that i need to have as short pathway as possible (smaller improvements yet again!) (None of this shows in troubleshooting, Apple needs to read my post i think.)
I am now browsing web forums for a better suggestions on the problems and found that Apple either did not care about the problems or the members of this or other forums recommended other media player's to use for handling devices and media (MediaMonkey, doubleTwist and so on). Either as to further their own agenda or that they have giving up on iTunes as a media player for large number of media files. (Found a good media tagger, Magic MP3 Tagger, which worked wonders on some of my older albums with no or little information). So back to my problems or questions.
What can be the trouble with a mp4 format?
Tendency to crash, is iTunes really that unstable?
Play through music video to see picture. Really iTunes?
Laggy! don't know what more to say or fix. (iTunes take to long to buffer (got between 0-15 seconds delay after i come this far, better then before but not great)
Sort video files better. (Tags). The only format i know to date that instantly recognise what media type it is, some movie format and the ringtone format m3u (Useful to know is that you can make your own ringtones by creating a ACC with a limited play time in advanced tab (max 30 seconds) then change the last file ending of the ACC file now created to m3u. Viola! (Don’t forget to change back to the regular playtime on the original file) your custom created ring/smstone in workable and high quality, but i digress).
Sorry for the long read but i wanted to be as thorough as possible and please forgive any grammar and spelling problems. English is not my native tongue and the spelling checker did not work in my laptop (browser) on this website
Currently using (The one with iTunes and the external hard drive) (But have had two different computers before with same problem, 1 PC & 1 Mac):
Screen
SyncMaster T240
Videocard
ATI Radeon HD 4870 (512Mb)
PC
ACPI x86
Motherboard
ASUSTeK Computer INC (P5G-PRO)
Memory
Type DDR2 Dual
Size 4096 MB
External Harddrive
WD Ext HDD 1021 USB Device
IDE ATA/ATAPI
Standard-Dual Channel PCI IDE
Standard-Dual Channel PCI IDE
Soundcard
TerraTec Aureon 5.1 PCI
AMD High Definition Audio Device
Processor
Intel(R) Core(TM) 2 Quad CPU Q8200 @ 2,33GHZThis problem cropped up for me yesterday. I had just copied a new video to my iTunes library and was testing that it worked properly, but while the sound was playing, the screen was black.
Pausing/pressing the Play button resolves the issue, until I select a new video/movie to play, when I have to do it again.
I'm running MacOS X 10.6.6 and iTunes 10.1.1 (4). I tried reinstalling iTunes, with no luck. I also tried the old mainstay of replacing the Preferences file, but that also didn't help.
There is ONE new wrinkle to this situation. Yesterday, I had installed a new app named AirView to stream videos over AirPlay to my iPad. This works fine, but after this, the issue cropped up, suggesting an AirPlay issue.
I have two iMacs, so decided to try this situation on the Kitchen iMac and played a video on this other iMac just fine, video and sound. I then started up AirView on the iPad and initiated the video stream to the iPad from the Kitchen iMac. The movie played fine on the iPad. I quit AirView and went back to try the video on the Kitchen iMac, and yes, the video now failed to display until I reselected Computer from the AirPlay menu at the bottom of the screen, or used the pause/play solution, even though Computer was still selected as the default in the AirPlay menu. Doing this once seemed to be enough to resolve the issue for playing all videos on the Kitchen iMac, but not on the Office iMac.
The only other difference between iTunes on these two iMacs is that one (the Office iMac) is running its videos from a FireWire 800 attached 2TB hard drive, while the Kitchen iMac's contents are on the internal hard drive.
Deselecting the AirPlay option in Preferences/Devices to start videos correctly on the Office iMac is not a solution, since this iMac serves as our home server for our Apple TV.
Since I have a practical option, however, and since this issue doesn't affect playing videos remotely using AirPlay, this is now a buggy annoyance, but no longer a problem for me. -
Radeon only boots with video sometimes
Alright, I'm having a strange problem. About half the time when I start my system, the radeon driver loads properly, kms kicks in, the terminal resolution changes and everything works peachy.
The other half of the time, right when the driver is loaded and the resolution is supposed to change, my monitor just starts as if it has a signal but the screen stays dark. The system boots up completely fine otherwise and I can ssh in to use it. Any ideas why I would have video one boot but not the next? I can't find any difference between them.
This is a fully up to date freshly installed system. I've included the journal logs for a successful boot and a no video boot below:
Good boot:
Allowing runtime journal files to grow to 177.8M.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Oct 22 10:23:56 CEST 2012
Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=842ee169-3e01-4f26-b5bd-900ad1142339 ro quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000096e9ffff] usable
BIOS-e820: [mem 0x0000000096ea0000-0x000000009733afff] reserved
BIOS-e820: [mem 0x000000009733b000-0x00000000973bafff] ACPI NVS
BIOS-e820: [mem 0x00000000973bb000-0x000000009741afff] ACPI data
BIOS-e820: [mem 0x000000009741b000-0x0000000097dfffff] usable
BIOS-e820: [mem 0x0000000097e00000-0x0000000097ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: AMD Brazos/Inagua, BIOS BZ_2.1.0.333_8 X64 03/02/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FF0000000 write-back
2 base 090000000 mask FF8000000 write-back
3 base 0FFE00000 mask FFFE00000 write-protect
4 base 0FFF79000 mask FFFFFF000 uncachable
5 base 0FFF7A000 mask FFFFFE000 uncachable
6 base 0FFF7C000 mask FFFFFC000 uncachable
7 base 0FFF80000 mask FFFFE0000 uncachable
TOM2: 000000014f000000 aka 5360M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x97e00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fbaa0-0x000fbaaf] mapped at [ffff8800000fbaa0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x97dfffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0x97dfffff] page 2M
kernel direct mapping tables up to 0x97dfffff @ [mem 0x1fbfe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x14effffff]
[mem 0x100000000-0x13fffffff] page 1G
[mem 0x140000000-0x14effffff] page 2M
kernel direct mapping tables up to 0x14effffff @ [mem 0x97dfe000-0x97dfffff]
RAMDISK: [mem 0x3788e000-0x37c3efff]
ACPI: RSDP 00000000000f00e0 00024 (v02 PTEC )
ACPI: XSDT 000000009741a120 00074 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
ACPI: FACP 000000009740d000 000F4 (v03 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: DSDT 000000009740e000 0B911 (v01 PTEC OEMTABLE 00001000 PTEC 00000002)
ACPI: FACS 00000000973a8000 00040
ACPI: HPET 000000009740c000 00038 (v01 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: APIC 000000009740b000 0005E (v02 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: MCFG 000000009740a000 0003C (v01 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: UEFI 0000000097409000 0003E (v01 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: UEFI 0000000097408000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: SSDT 0000000097407000 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 0000000097405000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: SSDT 0000000097404000 00F15 (v01 AMD SB800 00000001 INTL 20061109)
ACPI: UEFI 0000000097403000 0012A (v01 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014effffff]
Initmem setup node 0 [mem 0x00000000-0x14effffff]
NODE_DATA [mem 0x14effc000-0x14effffff]
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x14effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x96e9ffff]
node 0: [mem 0x9741b000-0x97dfffff]
node 0: [mem 0x100000000-0x14effffff]
On node 0 totalpages: 944146
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 600261 pages, LIFO batch:31
Normal zone: 5056 pages used for memmap
Normal zone: 318528 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000096ea0000 - 000000009733b000
PM: Registered nosave memory: 000000009733b000 - 00000000973bb000
PM: Registered nosave memory: 00000000973bb000 - 000000009741b000
PM: Registered nosave memory: 0000000097e00000 - 0000000098000000
PM: Registered nosave memory: 0000000098000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0x98000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88014ec00000 s84608 r8192 d21888 u1048576
pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 922700
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=842ee169-3e01-4f26-b5bd-900ad1142339 ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3635892k/5488640k available (4726k kernel code, 1712056k absent, 140692k reserved, 4144k data, 772k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
NR_IRQS:4352 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 15204352 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 997.913 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.98 BogoMIPS (lpj=3326376)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 0097e00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift is 0xffffffff
ACPI: Core revision 20120711
ftrace: allocating 18348 entries in 72 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD G-T40E Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (3993.97 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9733b000-0x973bafff] (524288 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe1ffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Power Resource [P0L0] (off)
ACPI: Power Resource [P0L1] (off)
ACPI: Power Resource [P0L2] (off)
ACPI: Power Resource [P0L3] (off)
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: root bus resource [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: root bus resource [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: root bus resource [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: root bus resource [mem 0x000ee000-0x000effff]
pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff]
pci_bus 0000:00: root bus resource [mem 0xe1000000-0xffffffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci 0000:00:00.0: [1022:1510] type 00 class 0x060000
pci 0000:00:01.0: [1002:9804] type 00 class 0x030000
pci 0000:00:01.0: reg 10: [mem 0xb0000000-0xbfffffff pref]
pci 0000:00:01.0: reg 14: [io 0x3000-0x30ff]
pci 0000:00:01.0: reg 18: [mem 0xc1200000-0xc123ffff]
pci 0000:00:01.0: supports D1 D2
pci 0000:00:01.1: [1002:1314] type 00 class 0x040300
pci 0000:00:01.1: reg 10: [mem 0xc1244000-0xc1247fff]
pci 0000:00:01.1: supports D1 D2
pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
pci 0000:00:11.0: reg 10: [io 0x3118-0x311f]
pci 0000:00:11.0: reg 14: [io 0x3124-0x3127]
pci 0000:00:11.0: reg 18: [io 0x3110-0x3117]
pci 0000:00:11.0: reg 1c: [io 0x3120-0x3123]
pci 0000:00:11.0: reg 20: [io 0x3100-0x310f]
pci 0000:00:11.0: reg 24: [mem 0xc124c000-0xc124c3ff]
pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:12.0: reg 10: [mem 0xc124b000-0xc124bfff]
pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:12.2: reg 10: [mem 0xc124c600-0xc124c6ff]
pci 0000:00:12.2: supports D1 D2
pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:13.0: reg 10: [mem 0xc124a000-0xc124afff]
pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:13.2: reg 10: [mem 0xc124c500-0xc124c5ff]
pci 0000:00:13.2: supports D1 D2
pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
pci 0000:00:14.2: reg 10: [mem 0xc1240000-0xc1243fff 64bit]
pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
pci 0000:00:14.5: reg 10: [mem 0xc1249000-0xc1249fff]
pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
pci 0000:00:15.0: supports D1 D2
pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
pci 0000:00:15.1: supports D1 D2
pci 0000:00:15.2: [1002:43a2] type 01 class 0x060400
pci 0000:00:15.2: supports D1 D2
pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
pci 0000:00:16.0: reg 10: [mem 0xc1248000-0xc1248fff]
pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
pci 0000:00:16.2: reg 10: [mem 0xc124c400-0xc124c4ff]
pci 0000:00:16.2: supports D1 D2
pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
pci 0000:00:18.0: [1022:1700] type 00 class 0x060000
pci 0000:00:18.1: [1022:1701] type 00 class 0x060000
pci 0000:00:18.2: [1022:1702] type 00 class 0x060000
pci 0000:00:18.3: [1022:1703] type 00 class 0x060000
pci 0000:00:18.4: [1022:1704] type 00 class 0x060000
pci 0000:00:18.5: [1022:1718] type 00 class 0x060000
pci 0000:00:18.6: [1022:1716] type 00 class 0x060000
pci 0000:00:18.7: [1022:1719] type 00 class 0x060000
pci_bus 0000:01: busn_res: [bus 01] is inserted under [bus 00-ff]
pci 0000:00:14.4: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c1fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c2000-0x000c3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c5fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c6000-0x000c7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000c9fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ca000-0x000cbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000cc000-0x000cdfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e1fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e2000-0x000e3fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e5fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e6000-0x000e7fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000e9fff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ea000-0x000ebfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000edfff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0x000ee000-0x000effff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xb0000000-0xdfffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [mem 0xe1000000-0xffffffff] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci_bus 0000:02: busn_res: [bus 02-03] is inserted under [bus 00-ff]
pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff]
pci 0000:02:00.0: reg 18: [mem 0xc0004000-0xc0004fff 64bit pref]
pci 0000:02:00.0: reg 20: [mem 0xc0000000-0xc0003fff 64bit pref]
pci 0000:02:00.0: reg 30: [mem 0xffff0000-0xffffffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.0: PCI bridge to [bus 02-03]
pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:15.0: bridge window [mem 0xc0a00000-0xc11fffff]
pci 0000:00:15.0: bridge window [mem 0xc0000000-0xc07fffff 64bit pref]
pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-ff]
pci 0000:04:00.0: [104c:8241] type 00 class 0x0c0330
pci 0000:04:00.0: reg 10: [mem 0xc0900000-0xc090ffff 64bit]
pci 0000:04:00.0: reg 18: [mem 0xc0910000-0xc0911fff 64bit]
pci 0000:04:00.0: supports D1 D2
pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [mem 0xc0900000-0xc09fffff]
pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-ff]
pci 0000:05:00.0: [10ec:8176] type 00 class 0x028000
pci 0000:05:00.0: reg 10: [io 0x1000-0x10ff]
pci 0000:05:00.0: reg 18: [mem 0xc0800000-0xc0803fff 64bit]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:15.2: PCI bridge to [bus 05]
pci 0000:00:15.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:15.2: bridge window [mem 0xc0800000-0xc08fffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SPB2._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0
vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:01.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x96ea0000-0x97ffffff]
e820: reserve RAM buffer [mem 0x97e00000-0x97ffffff]
e820: reserve RAM buffer [mem 0x14f000000-0x14fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 32-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-ff]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c1fff window]
pnp 00:00: [mem 0x000c2000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c5fff window]
pnp 00:00: [mem 0x000c6000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000c9fff window]
pnp 00:00: [mem 0x000ca000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cdfff window]
pnp 00:00: [mem 0x000ce000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d1fff window]
pnp 00:00: [mem 0x000d2000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d5fff window]
pnp 00:00: [mem 0x000d6000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000d9fff window]
pnp 00:00: [mem 0x000da000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000ddfff window]
pnp 00:00: [mem 0x000de000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e1fff window]
pnp 00:00: [mem 0x000e2000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e5fff window]
pnp 00:00: [mem 0x000e6000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000e9fff window]
pnp 00:00: [mem 0x000ea000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000edfff window]
pnp 00:00: [mem 0x000ee000-0x000effff window]
pnp 00:00: [mem 0xb0000000-0xdfffffff window]
pnp 00:00: [mem 0xe1000000-0xffffffff window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [io 0x0f50-0x0f51]
pnp 00:01: [mem 0xfec00000-0xfec00fff]
pnp 00:01: [mem 0xfee00000-0xfee00fff]
pnp 00:01: [mem 0xe0000000-0xe1ffffff]
system 00:01: [io 0x0f50-0x0f51] has been reserved
system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xe0000000-0xe1ffffff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x008f]
pnp 00:02: [io 0x00c0-0x00de]
pnp 00:02: [io 0x040b]
pnp 00:02: [io 0x04d6]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [io 0x00f0-0x00fe]
pnp 00:03: [irq 13]
pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x0061]
pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:06: [io 0x0022-0x0023]
pnp 00:06: [io 0x002e-0x002f]
pnp 00:06: [io 0x0072-0x0073]
pnp 00:06: [io 0x0080]
pnp 00:06: [io 0x0092]
pnp 00:06: [io 0x00b0-0x00b1]
pnp 00:06: [io 0x00b2]
pnp 00:06: [io 0x00b8]
pnp 00:06: [io 0x00bc]
pnp 00:06: [io 0x00f0]
pnp 00:06: [io 0x04d0-0x04d1]
pnp 00:06: [io 0x0530-0x0537]
pnp 00:06: [io 0x0800-0x0827]
pnp 00:06: [io 0x0830]
pnp 00:06: [io 0x0840-0x0847]
pnp 00:06: [io 0x0b00-0x0b1f]
pnp 00:06: [io 0x0b20-0x0b3f]
pnp 00:06: [io 0x0c00-0x0c01]
pnp 00:06: [io 0x0c14]
pnp 00:06: [io 0x0c50-0x0c52]
pnp 00:06: [io 0x0cd0-0x0cd1]
pnp 00:06: [io 0x0cd2-0x0cd3]
pnp 00:06: [io 0x0cd4-0x0cd5]
pnp 00:06: [io 0x0cd6-0x0cd7]
pnp 00:06: [io 0x0cd8-0x0cdf]
pnp 00:06: [io 0x0cf9]
pnp 00:06: [io 0x8100-0x81ff window]
pnp 00:06: [io 0x8200-0x82ff window]
system 00:06: [io 0x04d0-0x04d1] has been reserved
system 00:06: [io 0x0530-0x0537] has been reserved
system 00:06: [io 0x0800-0x0827] has been reserved
system 00:06: [io 0x0830] has been reserved
system 00:06: [io 0x0840-0x0847] has been reserved
system 00:06: [io 0x0b00-0x0b1f] has been reserved
system 00:06: [io 0x0b20-0x0b3f] has been reserved
system 00:06: [io 0x0c00-0x0c01] has been reserved
system 00:06: [io 0x0c14] has been reserved
system 00:06: [io 0x0c50-0x0c52] has been reserved
system 00:06: [io 0x0cd0-0x0cd1] has been reserved
system 00:06: [io 0x0cd2-0x0cd3] has been reserved
system 00:06: [io 0x0cd4-0x0cd5] has been reserved
system 00:06: [io 0x0cd6-0x0cd7] has been reserved
system 00:06: [io 0x0cd8-0x0cdf] has been reserved
system 00:06: [io 0x0cf9] could not be reserved
system 00:06: [io 0x8100-0x81ff window] has been reserved
system 00:06: [io 0x8200-0x82ff window] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:07: [mem 0x000e0000-0x000fffff]
pnp 00:07: [mem 0xffe00000-0xffffffff]
pnp 00:07: [mem 0x00000000-0xffffffffffffffff disabled]
pnp 00:07: [mem 0xfec10000-0xfec1001f]
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: [mem 0xfed61000-0xfed613ff]
pnp 00:07: [mem 0xfed80000-0xfed80fff]
pnp 00:07: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe1ffffff]; adding more reservations
system 00:07: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:07: [mem 0xffe00000-0xffffffff] has been reserved
system 00:07: [mem 0xfec10000-0xfec1001f] has been reserved
system 00:07: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:07: [mem 0xfed61000-0xfed613ff] has been reserved
system 00:07: [mem 0xfed80000-0xfed80fff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:08: [io 0x03f8-0x03ff]
pnp 00:08: [irq 4]
pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
pci 0000:00:14.4: PCI bridge to [bus 01]
pci 0000:02:00.0: BAR 6: assigned [mem 0xc0010000-0xc001ffff pref]
pci 0000:00:15.0: PCI bridge to [bus 02-03]
pci 0000:00:15.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:15.0: bridge window [mem 0xc0a00000-0xc11fffff]
pci 0000:00:15.0: bridge window [mem 0xc0000000-0xc07fffff 64bit pref]
pci 0000:00:15.1: PCI bridge to [bus 04]
pci 0000:00:15.1: bridge window [mem 0xc0900000-0xc09fffff]
pci 0000:00:15.2: PCI bridge to [bus 05]
pci 0000:00:15.2: bridge window [io 0x1000-0x1fff]
pci 0000:00:15.2: bridge window [mem 0xc0800000-0xc08fffff]
pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 5 [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: resource 6 [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: resource 7 [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: resource 8 [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: resource 10 [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: resource 11 [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: resource 12 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: resource 13 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: resource 14 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: resource 15 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: resource 16 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: resource 17 [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: resource 18 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: resource 19 [mem 0x000de000-0x000dffff]
pci_bus 0000:00: resource 20 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:00: resource 21 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:00: resource 22 [mem 0x000e4000-0x000e5fff]
pci_bus 0000:00: resource 23 [mem 0x000e6000-0x000e7fff]
pci_bus 0000:00: resource 24 [mem 0x000e8000-0x000e9fff]
pci_bus 0000:00: resource 25 [mem 0x000ea000-0x000ebfff]
pci_bus 0000:00: resource 26 [mem 0x000ec000-0x000edfff]
pci_bus 0000:00: resource 27 [mem 0x000ee000-0x000effff]
pci_bus 0000:00: resource 28 [mem 0xb0000000-0xdfffffff]
pci_bus 0000:00: resource 29 [mem 0xe1000000-0xffffffff]
pci_bus 0000:00: resource 30 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 31 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 4 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 5 [mem 0x000c0000-0x000c1fff]
pci_bus 0000:01: resource 6 [mem 0x000c2000-0x000c3fff]
pci_bus 0000:01: resource 7 [mem 0x000c4000-0x000c5fff]
pci_bus 0000:01: resource 8 [mem 0x000c6000-0x000c7fff]
pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000c9fff]
pci_bus 0000:01: resource 10 [mem 0x000ca000-0x000cbfff]
pci_bus 0000:01: resource 11 [mem 0x000cc000-0x000cdfff]
pci_bus 0000:01: resource 12 [mem 0x000d0000-0x000d1fff]
pci_bus 0000:01: resource 13 [mem 0x000d2000-0x000d3fff]
pci_bus 0000:01: resource 14 [mem 0x000d4000-0x000d5fff]
pci_bus 0000:01: resource 15 [mem 0x000d6000-0x000d7fff]
pci_bus 0000:01: resource 16 [mem 0x000d8000-0x000d9fff]
pci_bus 0000:01: resource 17 [mem 0x000da000-0x000dbfff]
pci_bus 0000:01: resource 18 [mem 0x000dc000-0x000ddfff]
pci_bus 0000:01: resource 19 [mem 0x000de000-0x000dffff]
pci_bus 0000:01: resource 20 [mem 0x000e0000-0x000e1fff]
pci_bus 0000:01: resource 21 [mem 0x000e2000-0x000e3fff]
pci_bus 0000:01: resource 22 [mem 0x000e4000-0x000e5fff]
pci_bus 0000:01: resource 23 [mem 0x000e6000-0x000e7fff]
pci_bus 0000:01: resource 24 [mem 0x000e8000-0x000e9fff]
pci_bus 0000:01: resource 25 [mem 0x000ea000-0x000ebfff]
pci_bus 0000:01: resource 26 [mem 0x000ec000-0x000edfff]
pci_bus 0000:01: resource 27 [mem 0x000ee000-0x000effff]
pci_bus 0000:01: resource 28 [mem 0xb0000000-0xdfffffff]
pci_bus 0000:01: resource 29 [mem 0xe1000000-0xffffffff]
pci_bus 0000:01: resource 30 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 31 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xc0a00000-0xc11fffff]
pci_bus 0000:02: resource 2 [mem 0xc0000000-0xc07fffff 64bit pref]
pci_bus 0000:04: resource 1 [mem 0xc0900000-0xc09fffff]
pci_bus 0000:05: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:05: resource 1 [mem 0xc0800000-0xc08fffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:01.0: Boot video device
pci 0000:04:00.0: xHCI BIOS handoff failed (BIOS bug ?) 00010401
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 3780k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x92ea0000-0x96e9ffff] (64MB) mapped at [ffff880092ea0000-ffff880096e9ffff]
LVT offset 0 assigned for vector 0x400
perf: AMD IBS detected (0x000000ff)
audit: initializing netlink socket (disabled)
type=2000 audit(1351625753.796:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7108
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
pcieport 0000:00:15.1: irq 41 for MSI/MSI-X
pcieport 0000:00:15.2: irq 42 for MSI/MSI-X
pcieport 0000:00:15.0: Signaling PME through PCIe PME interrupt
pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:15.1: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:15.2: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:15.2:pcie01: service driver pcie_pme loaded
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90003000000, using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: No PS/2 controller found. Probing ports directly.
i8042: No controller found
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
drop_monitor: Initializing network drop monitor service
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2012-10-30 19:35:54 UTC (1351625754)
Freeing unused kernel memory: 772k freed
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1408k freed
Freeing unused kernel memory: 568k freed
starting version 195
[drm] Initialized drm 1.1.0 20060810
[drm] radeon defaulting to kernel modesetting.
[drm] radeon kernel modesetting enabled.
checking generic (b0000000 300000) vs hw (b0000000 10000000)
fb: conflicting fb hw usage radeondrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (PALM 0x1002:0x9804 0x1002:0x9804).
[drm] register mmio base: 0xC1200000
[drm] register mmio size: 262144
ATOM BIOS: AMD
radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
mtrr: no more MTRRs available
[drm] Detected VRAM RAM=384M, BAR=256M
[drm] RAM width 32bits DDR
[TTM] Zone kernel: Available graphics memory: 1821210 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 384M of VRAM memory ready
[drm] radeon: 512M of GTT memory ready.
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:00:01.0: irq 43 for MSI/MSI-X
radeon 0000:00:01.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] GART: num cpu pages 131072, num gpu pages 131072
[drm] Loading PALM Microcode
[drm] PCIE GART of 512M enabled (table at 0x0000000000040000).
radeon 0000:00:01.0: WB enabled
radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000018000c00 and cpu addr 0xffff880147450c00
[drm] ring test on 0 succeeded in 1 usecs
[drm] ib test on ring 0 succeeded in 0 usecs
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] HDMI-A-1
[drm] HPD1
[drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY
[drm] Connector 1:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY
[drm] Connector 2:
[drm] VGA-1
[drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
[drm] Encoders:
[drm] CRT1: INTERNAL_KLDSCP_DAC1
[drm] Internal thermal controller without fan control
[drm] radeon: power management initialized
[drm] fb mappable at 0xB0142000
[drm] vram apper at 0xB0000000
[drm] size 8294400
[drm] fb depth is 24
[drm] pitch is 7680
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 160x48
fb0: radeondrmfb frame buffer device
drm: registered panic notifier
[drm] Initialized radeon 2.24.0 20080528 for 0000:00:01.0 on minor 0
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:12.2: EHCI Host Controller
ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
QUIRK: Enable AMD PLL fix
ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:12.2: debug port 1
ehci_hcd 0000:00:12.2: irq 17, io mem 0xc124c600
SCSI subsystem initialized
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:04:00.0: irq 17, io mem 0xc0900000
xhci_hcd 0000:04:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:04:00.0: irq 46 for MSI/MSI-X
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
xhci_hcd 0000:04:00.0: xHCI Host Controller
xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 5 ports detected
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:13.2: debug port 1
ehci_hcd 0000:00:13.2: irq 17, io mem 0xc124c500
ACPI: bus type scsi registered
libata version 3.00 loaded.
ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 5 ports detected
ehci_hcd 0000:00:16.2: EHCI Host Controller
ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
ehci_hcd 0000:00:16.2: debug port 1
ehci_hcd 0000:00:16.2: irq 17, io mem 0xc124c400
ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 4 ports detected
ahci 0000:00:11.0: version 3.0
ahci 0000:00:11.0: AHCI 0001.0200 32 slots 3 ports 3 Gbps 0x31 impl SATA mode
ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio ccc sxs
scsi0 : ahci
scsi1 : ahci
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xc124c000 port 0xc124c100 irq 19
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m1024@0xc124c000 port 0xc124c300 irq 19
ata6: SATA max UDMA/133 abar m1024@0xc124c000 port 0xc124c380 irq 19
ohci_hcd 0000:00:12.0: OHCI Host Controller
ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:12.0: irq 18, io mem 0xc124b000
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 5 ports detected
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 7
ohci_hcd 0000:00:13.0: irq 18, io mem 0xc124a000
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 5 ports detected
ohci_hcd 0000:00:14.5: OHCI Host Controller
ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
ohci_hcd 0000:00:14.5: irq 18, io mem 0xc1249000
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
ohci_hcd 0000:00:16.0: OHCI Host Controller
ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 9
ohci_hcd 0000:00:16.0: irq 18, io mem 0xc1248000
hub 9-0:1.0: USB hub found
hub 9-0:1.0: 4 ports detected
tsc: Refined TSC clocksource calibration: 997.874 MHz
Switching to clocksource tsc
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: SAMSUNG HM251HI, 2AJ10001, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM251HI 2AJ1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
usb 6-3: new full-speed USB device number 2 using ohci_hcd
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
usb 9-3: new low-speed USB device number 2 using ohci_hcd
systemd 195 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
Set hostname to <GTC001>.
Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
Starting Forward Password Requests to Wall Directory Watch.
Started Forward Password Requests to Wall Directory Watch.
Starting Remote File Systems.
Reached target Remote File Systems.
Starting Delayed Shutdown Socket.
Listening on Delayed Shutdown Socket.
Starting /dev/initctl Compatibility Named Pipe.
Listening on /dev/initctl Compatibility Named Pipe.
Starting Arbitrary Executable File Formats File System Automount Point.
Set up automount Arbitrary Executable File Formats File System Automount Point.
Starting Dispatch Password Requests to Console Directory Watch.
Started Dispatch Password Requests to Console Directory Watch.
Starting udev Kernel Socket.
Listening on udev Kernel Socket.
Starting udev Control Socket.
Listening on udev Control Socket.
Starting Encrypted Volumes.
Reached target Encrypted Volumes.
Expecting device dev-disk-by\x2dlabel-swap.device...
Expecting device dev-disk-by\x2dlabel-boot.device...
Expecting device dev-disk-by\x2dlabel-home.device...
Starting Journal Socket.
Listening on Journal Socket.
Started File System Check on Root Device.
Starting Remount Root and Kernel File Systems...
Starting Apply Kernel Variables...
Mounting Debug File System...
Mounting POSIX Message Queue File System...
Starting udev Coldplug all Devices...
Starting Setup Virtual Console...
Mounting Huge Pages File System...
Started Set Up Additional Binary Formats.
Started Load Kernel Modules.
Mounted Configuration File System.
Mounted FUSE Control File System.
Starting udev Kernel Device Manager...
Starting Journal Service...
Started Journal Service.
Started Apply Kernel Variables.
Mounted Debug File System.
Mounted POSIX Message Queue File System.
Started Setup Virtual Console.
Mounted Huge Pages File System.
EXT4-fs (sda3): re-mounted. Opts: data=ordered
starting version 195
Journal started
Started udev Kernel Device Manager.
Started Remount Root and Kernel File Systems.
Started udev Coldplug all Devices.
Starting Local File Systems (Pre).
Reached target Local File Systems (Pre).
Mounting /tmp...
Starting Load Random Seed...
Mounted /tmp.
Started Load Random Seed.
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
acpi device:35: registered as cooling_device0
ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input3
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THZ0] (59 C)
microcode: CPU0: patch_level=0x05000101
input: PC Speaker as /devices/platform/pcspkr/input/input4
ACPI: Fan [Z0F0] (off)
ACPI: Fan [Z0F1] (off)
ACPI: Fan [Z0F2] (off)
ACPI: Fan [Z0F3] (off)
ACPI: acpi_idle registered with cpuidle
ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \_SB_.PCI0.SMB_.SMB0 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: irq 47 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000622000, 00:01:c0:0c:b0:7c, XID 081000c0 IRQ 47
r8169 0000:02:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb9/9-3/9-3:1.0/input/input5
hid-generic 0003:04F2:0408.0001: input,hidraw0: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-0000:00:16.0-3/input0
input: Chicony USB Keyboard as /devices/pci0000:00/0000:00:16.0/usb9/9-3/9-3:1.1/input/input6
hid-generic 0003:04F2:0408.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Chicony USB Keyboard] on usb-0000:00:16.0-3/input1
microcode: CPU0: new patch_level=0x0500010d
microcode: CPU1: patch_level=0x05000101
microcode: CPU1: new patch_level=0x0500010d
microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
cfg80211: Calling CRDA to update world regulatory domain
usbcore: registered new interface driver btusb
kvm: Nested Virtualization enabled
kvm: Nested Paging enabled
powernow-k8: Found 1 AMD G-T40E Processor (2 cpu cores) (version 2.20.00)
powernow-k8: 0 : pstate 0 (1000 MHz)
powernow-k8: 1 : pstate 1 (800 MHz)
Starting Bluetooth.
Reached target Bluetooth.
Found device SAMSUNG_HM251HI.
Activating swap /dev/disk/by-label/swap...
rtl8192ce: Using firmware rtlwifi/rtl8192cfw.bin
Adding 511996k swap on /dev/sda2. Priority:-1 extents:1 across:511996k
Activated swap /dev/disk/by-label/swap.
Starting Swap.
Reached target Swap.
ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
rtlwifi: wireless switch is on
Found device SAMSUNG_HM251HI.
Starting File System Check on /dev/disk/by-label/home...
snd_hda_intel 0000:00:01.1: irq 48 for MSI/MSI-X
Found device SAMSUNG_HM251HI.
Starting File System Check on /dev/disk/by-label/boot...
input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input7
hda_codec: ALC888: SKU not ready 0x00000100
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input8
input: HDA ATI SB SPDIF as /devices/pci0000:00/0000:00:14.2/sound/card1/input9
input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input12
input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input13
input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card1/input14
input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card1/input15
input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card1/input16
input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card1/input17
boot: clean, 318/51200 files, 38007/204800 blocks
Starting Sound Card.
Reached target Sound Card.
Started File System Check on /dev/disk/by-label/boot.
Mounting /boot...
EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
Mounted /boot.
home: clean, 1775/128000 files, 92385/512000 blocks
Started File System Check on /dev/disk/by-label/home.
Mounting /home...
EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
Mounted /home.
Starting Local File Systems.
Reached target Local File Systems.
Starting Recreate Volatile Files and Directories...
Starting Trigger Flushing of Journal to Persistent Storage...
Allowing system journal files to grow to 563.6M.
Started Trigger Flushing of Journal to Persistent Storage.
Started Recreate Volatile Files and Directories.
Starting System Initialization.
Reached target System Initialization.
Starting Restore Sound Card State...
Starting D-Bus System Message Bus Socket.
Listening on D-Bus System Message Bus Socket.
Starting Sockets.
Reached target Sockets.
Starting Daily Cleanup of Temporary Directories.
Started Daily Cleanup of Temporary Directories.
Starting Basic System.
Starting MySQL Server...
Started SSH Key Generation.
Starting OpenSSH Daemon...
Started OpenSSH Daemon.
Starting Permit User Sessions...
Starting D-Bus System Message Bus...
Started D-Bus System Message Bus.
Starting Login Service...
version 5.6.2 starting
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Started Restore Sound Card State.
Started Permit User Sessions.
Starting Getty on tty1...
Started Getty on tty1.
Starting Login Prompts.
Reached target Login Prompts.
New seat seat0.
Started Login Service.
Watching system buttons on /dev/input/event2 (Power Button)
Watching system buttons on /dev/input/event3 (Video Bus)
Watching system buttons on /dev/input/event0 (Power Button)
Watching system buttons on /dev/input/event1 (Lid Switch)
eth0: waiting for carrier
Server listening on 0.0.0.0 port 22.
Server listening on :: port 22.
eth0: carrier acquired
eth0: sending IPv6 Router Solicitation
eth0: sendmsg: Cannot assign requested address
eth0: broadcasting for a lease
r8169 0000:02:00.0: eth0: link up
121030 13:36:02 InnoDB: The InnoDB memory heap is disabled
121030 13:36:02 InnoDB: Mutexes and rw_locks use GCC atomic builtins
121030 13:36:02 InnoDB: Compressed tables use zlib 1.2.7
121030 13:36:02 InnoDB: Initializing buffer pool, size = 128.0M
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
121030 13:36:02 InnoDB: Completed initialization of buffer pool
121030 13:36:02 InnoDB: highest supported file format is Barracuda.
eth0: offered 192.168.10.25 from 192.168.10.1
eth0: acknowledged 192.168.10.25 from 192.168.10.1
eth0: leased 192.168.10.25 for 86400 seconds
forked to background, child pid 298
Started dhcpcd on eth0.
Starting Network.
Reached target Network.
Starting Network Time Service...
ntpd [email protected] Tue Aug 21 15:06:24 UTC 2012 (1)
Started Network Time Service.
proto: precision = 0.303 usec
ntp_io: estimated max descriptors: 1024, initial socket boundary: 16
Listen and drop on 0 v4wildcard 0.0.0.0 UDP 123
Listen and drop on 1 v6wildcard :: UDP 123
Listen normally on 2 lo 127.0.0.1 UDP 123
Listen normally on 3 eth0 192.168.10.25 UDP 123
Listen normally on 4 lo ::1 UDP 123
peers refreshed
Listening on routing socket on fd #21 for interface updates
121030 13:36:03 InnoDB: Waiting for the background threads to start
121030 13:36:04 InnoDB: 1.1.8 started; log sequence number 2389668
121030 13:36:04 [Warning] Neither --relay-log nor --relay-log-index were used; so replication may break when this MySQL server acts as a slave and has his hostname changed!! Please use '--relay-log=GTC001-relay-bin' to avoid this problem.
121030 13:36:05 [Note] Event Scheduler: Loaded 0 events
121030 13:36:05 [Note] /usr/bin/mysqld: ready for connections.
Version: '5.5.28-log' socket: '/var/run/mysqld/mysqld.sock' port: 0 Source distribution
Started MySQL Server.
Starting Multi-User.
Reached target Multi-User.
Starting Graphical Interface.
Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
Started Update UTMP about System Runlevel Changes.
Startup finished in 3s 417ms 226us (kernel) + 8s 386ms 264us (userspace) = 11s 803ms 490us.
Bad boot:
Allowing runtime journal files to grow to 177.8M.
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.3-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Mon Oct 22 10:23:56 CEST 2012
Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=842ee169-3e01-4f26-b5bd-900ad1142339 ro quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x0000000096e9ffff] usable
BIOS-e820: [mem 0x0000000096ea0000-0x000000009733afff] reserved
BIOS-e820: [mem 0x000000009733b000-0x00000000973bafff] ACPI NVS
BIOS-e820: [mem 0x00000000973bb000-0x000000009741afff] ACPI data
BIOS-e820: [mem 0x000000009741b000-0x0000000097dfffff] usable
BIOS-e820: [mem 0x0000000097e00000-0x0000000097ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fecfffff] reserved
BIOS-e820: [mem 0x00000000fed80000-0x00000000fed80fff] reserved
BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000014effffff] usable
NX (Execute Disable) protection: active
DMI 2.6 present.
DMI: AMD Brazos/Inagua, BIOS BZ_2.1.0.333_8 X64 03/02/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x14f000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FF0000000 write-back
2 base 090000000 mask FF8000000 write-back
3 base 0FFE00000 mask FFFE00000 write-protect
4 base 0FFF79000 mask FFFFFF000 uncachable
5 base 0FFF7A000 mask FFFFFE000 uncachable
6 base 0FFF7C000 mask FFFFFC000 uncachable
7 base 0FFF80000 mask FFFFE0000 uncachable
TOM2: 000000014f000000 aka 5360M
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x97e00 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fbaa0-0x000fbaaf] mapped at [ffff8800000fbaa0]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x97dfffff]
[mem 0x00000000-0x7fffffff] page 1G
[mem 0x80000000-0x97dfffff] page 2M
kernel direct mapping tables up to 0x97dfffff @ [mem 0x1fbfe000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x14effffff]
[mem 0x100000000-0x13fffffff] page 1G
[mem 0x140000000-0x14effffff] page 2M
kernel direct mapping tables up to 0x14effffff @ [mem 0x97dfe000-0x97dfffff]
RAMDISK: [mem 0x3788e000-0x37c3efff]
ACPI: RSDP 00000000000f00e0 00024 (v02 PTEC )
ACPI: XSDT 000000009741a120 00074 (v01 PTEC OEMTABLE 00000002 PTEC 00000002)
ACPI: FACP 000000009740d000 000F4 (v03 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: DSDT 000000009740e000 0B911 (v01 PTEC OEMTABLE 00001000 PTEC 00000002)
ACPI: FACS 00000000973a8000 00040
ACPI: HPET 000000009740c000 00038 (v01 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: APIC 000000009740b000 0005E (v02 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: MCFG 000000009740a000 0003C (v01 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: UEFI 0000000097409000 0003E (v01 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: UEFI 0000000097408000 00042 (v01 PTL COMBUF 00000001 PTL 00000001)
ACPI: SSDT 0000000097407000 0030C (v01 AMD POWERNOW 00000001 AMD 00000001)
ACPI: SSDT 0000000097405000 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
ACPI: SSDT 0000000097404000 00F15 (v01 AMD SB800 00000001 INTL 20061109)
ACPI: UEFI 0000000097403000 0012A (v01 PTEC OEMTABLE 00000002 PTL 00000002)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000014effffff]
Initmem setup node 0 [mem 0x00000000-0x14effffff]
NODE_DATA [mem 0x14effc000-0x14effffff]
[ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014e5fffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x14effffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x96e9ffff]
node 0: [mem 0x9741b000-0x97dfffff]
node 0: [mem 0x100000000-0x14effffff]
On node 0 totalpages: 944146
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 600261 pages, LIFO batch:31
Normal zone: 5056 pages used for memmap
Normal zone: 318528 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x43538210 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000096ea0000 - 000000009733b000
PM: Registered nosave memory: 000000009733b000 - 00000000973bb000
PM: Registered nosave memory: 00000000973bb000 - 000000009741b000
PM: Registered nosave memory: 0000000097e00000 - 0000000098000000
PM: Registered nosave memory: 0000000098000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed80000
PM: Registered nosave memory: 00000000fed80000 - 00000000fed81000
PM: Registered nosave memory: 00000000fed81000 - 00000000ffe00000
PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
e820: [mem 0x98000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88014ec00000 s84608 r8192 d21888 u1048576
pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Node order, mobility grouping on. Total pages: 922700
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=842ee169-3e01-4f26-b5bd-900ad1142339 ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3635892k/5488640k available (4726k kernel code, 1712056k absent, 140692k reserved, 4144k data, 772k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Preemptible hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
Dump stacks of tasks blocking RCU-preempt GP.
RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
NR_IRQS:4352 nr_irqs:512 16
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
allocated 15204352 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 997.850 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 1996.85 BogoMIPS (lpj=3326166)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
tseg: 0097e00000
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0
tlb_flushall_shift is 0xffffffff
ACPI: Core revision 20120711
ftrace: allocating 18348 entries in 72 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: AMD G-T40E Processor stepping 00
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 OK
Brought up 2 CPUs
smpboot: Total of 2 processors activated (3992.70 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x9733b000-0x973bafff] (524288 bytes)
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
PCI: Using configuration type 1 for extended access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe1ffffff] reserved in ACPI motherboard resources
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
ACPI: Power Resource [P0L0] (off)
ACPI: Power Resource [P0L1] (off)
ACPI: Power Resource [P0L2] (off)
ACPI: Power Resource [P0L3] (off)
ACPI: ACPI Dock Station Driver: 2 docks/bays found
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: ignoring host bridge window [mem 0x000ce000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff])
pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-1f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c1fff]
pci_bus 0000:00: root bus resource [mem 0x000c2000-0x000c3fff]
pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c5fff]
pci_bus 0000:00: root bus resource [mem 0x000c6000-0x000c7fff]
pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000c9fff]
pci_bus 0000:00: root bus resource [mem 0x000ca000-0x000cbfff]
pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cdfff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d1fff]
pci_bus 0000:00: root bus resource [mem 0x000d2000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d5fff]
pci_bus 0000:00: root bus resource [mem 0x000d6000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000d9fff]
pci_bus 0000:00: root bus resource [mem 0x000da000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000ddfff]
pci_bus 0000:00: root bus resource [mem 0x000de000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e1fff]
pciI already filed this as a bug on the bugtracker, please join us! https://bugs.archlinux.org/task/31668
-
LR5 crashes each time I open a folder with video
The title sums it up.
I have a Fujifilm HS20EXR folder which contains video.
Each time I select the folder, LR5 (Mac ML) crashes.
NeilFYI It is not only the Mac version of LR5 that is having issues with videos.
On Windows, there is an issue with 100% CPU and long delay of showing videos in Library mode.
Whether the problems are related is unknown to me.
PT -
Advance to slide with video already playing
A client wants to be able to advance to a slide with the video already playing, this is for a live presentation, normally done by rolling in video from tape and using switcher to cross fade from text to moving video.
Any solutions would be appreciated
Thanks
mac pro Mac OS X (10.4.8)Welcome to the discussions, Magneticone.
If all you want is the equivalent of a crossfade, it can be accomplished quite easily.
In Keynote, video can play behind other objects, and can be set to play immediately upon slide transition. These two features allow you to emulate a cross-fade.
Set up the first slide in its final state, and take a screenshot of it at its full-size (100%). Set the transition to the next slide as "None" (the default).
On the second slide, insert your video file, and set it to play immediately after the slide transition (this is the default). Now, place the screenshot on top of the video image, align it so that it exactly matches the first slide, and give it a Dissolve build out, to run immediately (or with whatever delay you want) after the slide transition.
What will happen is that the first slide with transition to the second "invisibly", since the same image is on both. Once the second slide appears, the video behind the screenshot will start playing, and the screenshot will then fade to reveal the already-playing video. The effect will be of a slide crossfading with video.
(As is often the case with Keynote, it is helpful not to first approach presentation problems in terms of actual "slides", but instead in terms of what the effect should be. Many time you can fool the audience into seeing more or fewer "slides" than are actually used in the presentation, and this can make achieving certain effects possible, or easier.) -
Audio not sync with video using photo booth since os moutain lion was installed
Since OS Moutain Lion was installed my photo booth no longer function well, audio is not sync with video, the sound delay is obvious with the video outut wha can I do to correct this?
I've seen that problem in several threads, both here and in the Mountain Lion forum. I tried to replicate the problem but was unable to do so... so it's not a problem effecting all Macs. Try posting here - in the Mountain Lion forum - and see what you get as a search. There's one specific "More Like This" to the right on this thread but there doesn't seem to have been a solution posted.
Good luck,
Clinton -
Audio does not fit with video FCPX 10.1.3
Hi, I have a little bit unusual (at least for me) problem. I have old video from camera (maybe 20 years) on my HDD and I would like to edit it. Problem is the audio does not fit with video - when somebody talks it is apparently delayed. Can you give me a hint how to fix it in FCPX? I tried to detach audio and move just audio line but it is not possible.
ThanksI tried it again from the beginning and now I can move audio to the right. I would just need to move video to the right, so audio stays still.. I need to delay audio so one option is to delete part of beginning of audio track or somehow move video to the right but it is not possible, i guess video track in the beginning cannot be empty....
It is difficult to explain -
Monitoring audio in sync with video when capturing in FCP studio
Is there a way I can monitor audio in sync with video when capturing in FCP Studio? I know you can plug headphones into your tape deck but that sound is not in sync with the video in the capture window due to time delay. I tried plugging the headphones into my Powerbook but could not get any audio coming through these, nor audio through the Mac's inbuilt speakers.
The preview checkbox is ticked and the audio monitor indicates that sound is being picked up (the levels rise and fall) but I still can't hear anything! The audio/video sync on the external monitor is ok, but because there is a time delay between that and the video capture window, I can't use that as a reliable monitor for sound sync. If I could resolve the video sync problem there, then I could monitor the sound through the external monitor.
-
Problems with Video Sound on Treo Pro
I can not get any sound on my Treo Pro when accessing Video on the Internet, such as YouTube. Can someone solve my problem?
Thanks
Post relates to: Treo 800w (Sprint)or some mistake I am making?
You are using an image processing program to edit video. Seriously, use Premiere Pro or any other proper editing tool, if sound is critical and you are working with video that long. All PS is meant to do is edit short DSLR clips, nothing more. Yes, it's some sort of bug/ limitation - you're simply running out of memory somewhere.
Mylenium -
Disable calls with video silently in jabber 9.2.6
Hello,
My company just bought Jabber 9.2.6 and as an application packager I was selected to create a package that installs Jabber completely silently. I have no problems with the installation but they gave me instructions to select the "Never start calls with video" option and I cannot find how to disable this silently anywhere. I found that for previous Jabber version this was set in the jabber-config.xml file but I cannot find it anywhere in the 9.2.6 install. I thought this maybe was set through the registry but couldn't find any registry keys for this either. the only configuration files I see in Jabber install folder are "log4cxx.properties", "jabber-config-defaults", "jabber-plugin-config", "jabber-ui-config", "plugin-config" and "StartupHandlerConfig". I couldn't find anything about calls with video in these files. Does anyone have any idea on how to enable this "Never start calls with video" option in Jabber 9.2.6 please?Hi Gabriel,
you should follow instruction from CUCM docs :
Migration of Cisco Jabber Video SettingsIn Cisco Unified Presence Release 8.x, the Always begin with video muted setting is configured in Cisco Unified Presence Administration under Application > Cisco Jabber > Settings. This setting is not migrated during the upgrade to the current release. In the current release, this setting is configured in Unified Communications Manager as a Cisco Jabber Enterprise Parameter called Never start call with video. The default value for the Never start call with video setting is False. If you want to configure calls to not start with video, you must set the Never start call with video value to True in theUnified Communications Manager Enterprise Parameter configuration window.
And from Jabber side you should set StartCallWithVideo parameter in jabber-config.xml.
In short:
Admin should set Never Start Call with Video parameter to True.
Admin should set StartCallWithVideo option to False in jabber-config.xml.
Regards,
Nebojsa -
It stops working if I access websites with videos, and all sort of more complex flash. It I try to write an e-mail, it also stops. I can't do anything. PC keeps working, though. So I press ctrl+alt+del. It opens that window asking if you want to close all the tabs. I notice that firefox start to work again, behind that window. But, once I close the window, it stops again. Sometimes I can close the tab with the video before it hangs again, which can take a few ctr+alt+del's. It doesn't happen with other browsers! It started 1 week ago. Is it an extension? Or a virus (i use avast)? Thank you!
Perform the suggestions mentioned in the following articles:
* [https://support.mozilla.com/en-US/kb/Template:clearCookiesCache/ Clear Cookies & Cache]
* [[Troubleshooting extensions and themes]]
* [[Managing the Flash plugin]]
Check and tell if its working. -
Win7-64 Photoshop CC blank Save As dialog, then crash, when working with video / frame animations
Hi, I recently updated to CC from CS6 and am having issues when working with PSDs containing video layers, or are set up as frame animations: When attempting to Save As, the dialog will be completely blank except for the Save and Cancel buttons. If I press cancel, then return to Save As, CC then often crashes.
Here is the Error Event from Event Viewer:
Faulting application name: Photoshop.exe, version: 14.0.0.0, time stamp: 0x5176451b
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x750
Faulting application start time: 0x01ce9e1925a5045b
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: db6d5f8f-0a0c-11e3-9df9-0026b9cc01d1
So far I am only having these issues if I have been working with video layers and then frame animations. Frame animations in particular seem to cause instability as I can often work with video layers all day without a problem. Then if I import video frames to layers, or open a PSD containing a frame animation, the Save As may not necessarily work.
Sometimes closing and restarting Photoshop will allow me to save again, but then sometimes a whole system reboot is required. It is only temporary though.
I am not running antivirus software or other apps aside from what starts at boot.Frustrating that this thread has petered out, since I'm having the exact same issue. Did you ever find a way to improved stability?
Also of note, the issue followed me across machines. Two weeks ago I purchased a new machine, figured if that didn't solve the problem nothing would... It didn't. :\
The only similar factors are that the machines both are 64bit Windows 7 (a fresh OEM install on the new box) and have nVidia-brand graphics cards. (Again, though - not the SAME graphics card, picked up a new one with the new machine.) No drive cloning was involved: this is completely new hardware, a fresh factory install of Windows 7, different antivirus (went from AVG to Avast), and new download of Photoshop CC from CreativeCloud.
Looks like our event details are quite similar, too.
Log Name:
Application
Source:
Application Error
Date:
4/6/2014 1:57:39 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
REDACTED
Description:
Faulting application name: Photoshop.exe, version: 14.2.1.570, time stamp: 0x52f4a9f2
Faulting module name: MediaCoreIF.DLL, version: 7.0.0.0, time stamp: 0x51573a21
Exception code: 0xc0000005
Fault offset: 0x00000000001fca98
Faulting process id: 0x1ca4
Faulting application start time: 0x01cf51c68639ec43
Faulting application path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\Photoshop.exe
Faulting module path: C:\Program Files\Adobe\Adobe Photoshop CC (64 Bit)\MediaCoreIF.DLL
Report Id: 5268f22b-bdbd-11e3-b9df-d850e65afc6f -
I'm having trouble with video imported from my camera memory card.
I'm having trouble with video imported from my camera memory card.The video breaks up and pixelizes when it's directly imported from the memory card. That makes the video useless. Why does this happen? It doesn't do that in any other video editing software. Thanks for the help.
More info please:
Type of camera?
Was the card formatted in the camera doing the shooting?
Type of files the camera is set to record?
Al
Maybe you are looking for
-
How can I save finished and shared movies from old iMovieHD-projects
Hi there, I have a big problem: I have found some old iMovieHD 6 Projects. (.iMovieProject) that already have been finished years ago. Now I would like to save the finished movies outside the projects but I can't find a way to do this although I've b
-
Invoking a BPEL Process via Java Remote Client
Hi everyone! I want to invoke a BPEL process from my Java Application which is not running on the same Application-Server (not the same Java RE) as the BPEL processmanager does. For Applications running on the same AS there is the IDeliveryService cl
-
Basic thing to know about data transfer programs
Hi Friends I have one basic question need to be clarified: I have one file contains 100 records, I have to upload this file to sap. My question is : suppose 80th record is the error record, what will happen if I am doing this using session metod? sup
-
Hello, I have a requirement where i am getting a date in one of the field in this particular format 2010-05-03T00:00:00+05:30 Now i want to have date difference with system date. field date - system date. please guide as how to achieve this i
-
Dumb, newbie question about Quicktime
I recently switched from PC to Mac, so I do not have much experience using Quicktime, rather than WMP. My question is this: Can I configure Quicktime to open internet videos in an external player, rather than in the web browser? The reason for the qu