Delete a component in the BOM

Hi,
I have created a BOM for SD (one material with some component)
Do I have a choice to delete one component for one day in the BOM (if this component is insufficient  or too late GR)  without change my BOM for the future days?
where can I do it in th eBOM or in the sale order.
Thanks

Dear,
I hope the situation is you have sales order and for that sales order you have a production order
Decide in which in production order you donot want to withdrew the component and delete that component in production order. When you confirm that component will not be issued.
If you donot want to delte in Production order, then during confirmation itself...goto goods movement screen and delete atht conmponent and save the confirmation.
pl conme back if required

Similar Messages

  • Component in the BOM whit the for decimal .

    Dear gurus,
    i need insert in the quantity of component in the BOM the value 1,1234 , a value whit for decimal but the system for the UM ( example KG) is 3 decimal in the  transaction CUNI .
    Are there the procedure for insert this value ?
    Thanks a lot
    Daniele Pistilli
    PP

    Hi,
    SAP Standard will allow u only 3 decimal palces.
    So do one thing increase the base quantity of header material so it can fullfill you're requirement..
    EX: in bom you have given like for one FERT material you want RAW material 1.1234..normal in this sap std will allow only up to
    1.123 only...
    For this in the BOM of FERT material header data PUT base Quantity 100 so that you can put youre RAW material Quantity as
    112.23.
    Regards,
    Ravi

  • Error while deleting any component from the widget

    Whenever i delete any component from widget it stops running..i means whenever after deleting i execte the widget nothing happens.........it gives me an error saying
    "Syntax Error in line 1 " and no other information....so can anyone tell me how to resolve this????????

    Hello,
    This might happen when you delete Header or Footer from widget. It is already corrected in latest version of Tools. Workaround is to add dummy view that is not used anywhere in widget but contains Header and Footer.
    Eriks

  • How can i delete software component in the IR

    How can i delete software component in IR,when there are too many SCs?

    If you have to delete a SWCV, you have to delete all the namespaces with in that first. Open a name space and delete all the user defined objects in that first. Then delete the Std Fault and log data types and delete it and remove the name space from the SWCV by opening the SWCV and using - button on the name space. Now activate the changes. This will delete the name space.
    Repeat the step for all the name space with in the SWCV. After all objects are deleted. Open the SWCV and use the menu, SWCV ->Delete object.
    Regards,
    Jai Shanakr

  • How to delete sotware component,SWCV and all objects under SWCV

    Hi All,
    how to delete sotware component,SWCV and all objects under this SWCV. Since i have imported all the SWC, SWCV and all interface , mapping object. I want to delete all these imported objects and re import these objects again. Please let me know how to do that.
    Thanks in advance.
    Kalpana

    You will have to delete all the objects under the namespace (then activate the changes), then delete the namespace and then finally delete the SWCV !!
    More ref this latest thread on the same subject: how can i delete software component in the IR

  • Deleted Component appearing in BOM

    Dear Guru's,
    I m facing a strange situation where i have a BOM of material with one component and then i came to knw that,that material is not required any more so i removed the component  and deleted the BOM.
    But when i am running the MRP it is showing the deleted component,i am not able to understand hw it is happening.
    Kindly throw some light on this.
    With Regards.

    check in md04 of that bom component, is there any dependent requirement.May be mrp for that header material
    was carried out earlier before your bom change and later you have run mrp for components individually.
    Do one thing run mrp - single item multi level for your header material again with planing mode 3 - delete and recreate planning data.
    Regards,
    Dhaval

  • After getting the bom ,find routing,workcenter,how to get component routing

    hi experts.
              the requirement is find the find the routing details of the given materials.
    input is
    material using select-options.
      plant
    out put
    1.operator
    2.material
    3.material description
    4.workcenter
    5.vendor
    6.operation description
    7.uom
    8.qty
    9.uom
    10.setuptime
    11.processingtime
    12.deliverytime
    example.
           materials t4595959----this materials bom is give below
           3939393----
    procurement type is f
           3393939 -
    procurement type is e
           3939393------- procurement type is x
        i explanied what i tried.
       tables : marc,mapl,plpo,crhd,eord,eina,eine.
        1. using cs_com_expl_mat_v2  to get the bom explosion
       2. after got the materials with bom
       <b>MARC </b>                                  <b>MAPL</b>                  MATNR                                             MATNR               
      WERKS                1                         WERKS
    BESKZ        =======> E OR x          PLNTY
                                                             PLNNR
                2                                              3
    <b>MAPL</b> =====>  <b> PLPO</b>      =====> CRHD
                             PLNTY                                  OBJID
                            PLNNR                                   ARBPL
                           VORNR
                            ARBID
                            LTXA1
                            VGE01
                            VGW01
                             VGW02
    <b>                   1                         2                     3
    MARC</b>      ==>     <b>EORD</b> =>   <b>EINA</b> =>     EINE
    BESKZ == 'F'              MATNR             MATNR          INFNR
                                       LIFNR               LIFNR             APLFZ
                                      FLIFN = 'X'          INFNR
    followed this method to explode the bom and got the operation.
    but its only fetch the header materials operation ,not component operaion
    h we get the opeations of the component
    thanks in advance
    Regards
    ds

    hI,
           Yes i checked the debugging mode ,its only fecthed the header materials
    but not component materials,
    i here give the query for ur review ,pl give me a solution
    START-OF-SELECTION.
      CLEAR ISTPO. REFRESH ISTPO.
      LOOP AT ITAB.
      CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
          EXPORTING
            CAPID                 = 'PP01'
            MEHRS                 = 'X'
            MMAPS                 = ' '
            MDMPS                 =  ' '
         BREMS                  = 'X'
         DISMM                 = ' '
         LIFNR                 = ' '
         WEBAZ                 = ' '
            DATUV                 = SY-DATUM
            MTNRV                 = ITAB-MATNR
            WERKS                 = P_WERKS
            EMENG                 = '1'
            STKKZ                 = ' '
            FBSTP                 = ' '
            FTREL                 = ' '
          IMPORTING
            TOPMAT                = W_TOPMAT
           DSTST                 = DSTST
          TABLES
            STB                   = ISTPO
            MATCAT                = MATCAT
          EXCEPTIONS
            ALT_NOT_FOUND         = 1
            CALL_INVALID          = 2
            MATERIAL_NOT_FOUND    = 3
            MISSING_AUTHORIZATION = 4
            NO_BOM_FOUND          = 5
            NO_PLANT_DATA         = 6
            NO_SUITABLE_BOM_FOUND = 7
            OTHERS                = 8.
      WRITE: / W_TOPMAT-MATNR UNDER TEXT-H00 COLOR COL_HEADING,
               W_TOPMAT-MAKTX UNDER TEXT-H01 COLOR COL_HEADING.
        SELECT MATNR WERKS OBJID BESKZ FROM MARC INTO CORRESPONDING FIELDS OF TABLE IT_ITAB_IDEL
      WHERE MATNR = ITAB-MATNR  AND BESKZ = 'X' OR BESKZ = 'E' OR BESKZ = 'F'.
    SELECT MATNR WERKS PLNTY PLNNR LIFNR FROM MAPL INTO CORRESPONDING FIELDS OF TABLE IT_MAPL_IDEL
                                                WHERE  MATNR = ITAB-MATNR AND
                                                         WERKS = 'IN01' .
    SELECT PLNTY PLNNR ZAEHL VORNR  ARBID OBJTY LTXA1 VGE01 VGW01 VGW02 PLIFZ FROM PLPO INTO CORRESPONDING FIELDS OF TABLE IT_PLPO_IDEL
                                            FOR ALL ENTRIES IN IT_MAPL_IDEL
                                             WHERE PLNTY = IT_MAPL_IDEL-PLNTY AND
                                                  PLNNR = IT_MAPL_IDEL-PLNNR AND
                                                   WERKS = 'IN01' AND ARBID <> 0.
        SELECT OBJTY OBJID ARBPL FROM CRHD INTO CORRESPONDING FIELDS OF TABLE IT_CRHD_IDEL
                                                              FOR ALL ENTRIES IN IT_PLPO_IDEL
                                                              WHERE OBJID = IT_PLPO_IDEL-ARBID.
    LOOP AT ISTPO.
      IT_FINAL_IDEL-POSNR  = ISTPO-POSNR.
      IT_FINAL_IDEL-IDNRK  = ISTPO-IDNRK.
      IT_FINAL_IDEL-OJTXP  = ISTPO-OJTXP.
      IT_FINAL_IDEL-MENGE  = ISTPO-MENGE.
      IT_FINAL_IDEL-MEINS  = ISTPO-MEINS.
    LOOP AT IT_PLPO_IDEL.
        IT_FINAL_IDEL-VORNR = IT_PLPO_IDEL-VORNR.
        IT_FINAL_IDEL-ARBID = IT_PLPO_IDEL-ARBID.
        IT_FINAL_IDEL-OBJTY = IT_PLPO_IDEL-OBJTY.
        IT_FINAL_IDEL-LTXA1 = IT_PLPO_IDEL-LTXA1.
        IT_FINAL_IDEL-VGE01 = IT_PLPO_IDEL-VGE01.
        IT_FINAL_IDEL-VGW01 = IT_PLPO_IDEL-VGW01.
        IT_FINAL_IDEL-VGW02 = IT_PLPO_IDEL-VGW02.
        READ TABLE IT_CRHD_IDEL WITH KEY OBJID = IT_PLPO_IDEL-ARBID.
        IT_FINAL_IDEL-ARBPL = IT_CRHD_IDEL-ARBPL.
        APPEND IT_FINAL_IDEL.
        CLEAR : IT_FINAL_IDEL,IT_PLPO_IDEL,IT_CRHD_IDEL,ISTPO.
      ENDLOOP.
       ENDLOOP.

  • In subcontracting the component quantity consumed more than the BOM quantit

    Dear Experts,
    In subcontracting the component quantity ( 543) consumed more than the BOM quantity while doing GR, so please let me know what may be the possible reasons for the same.
    Regards,
    Balu

    Balu
    may be the suncontractor needed more than the BOM quantiy.It is the case of overconsumption of components.

  • Add and edit BOM component in the Equi BOM using LSMW

    Hi All,
    I created a Batch input recording in LSMW to add BOM component in the Equi BOM (IB02). It is working fine. But my requirement is while adding it should check the material already available in the BOM, if not insert a new line or if it is there then it should only edit the quantity. Is it possible in LSMW?

    It is not possible with LSMW as it is an SAP standard program.
    To meet your requirment you can create an BDC with help of your ABAP team and in that program you can put all the mentioned conditions and requirement you want.
    hope your problem is resolved.

  • How to delete a software component in the IR

    I imported a software component from the SLD to the IR.
    Now I want to delete it. I can delete it in the SLD.
    But how can I get rid of it in my IR. The software component is empty.

    Theo--
    You can delete software components & versions from the IR in XI 2.0.  (We're on Service Pack 5, and I've done it to clean up our IR.)
    Here is the process:
    1. Delete all configuration and/or import objects from the SCV.  Don't forget the 2 fault data types that SAP automatically creates in every namespace.
    1a.  Activate all change lists?  I don't remember for certain if this is needed here; if it won't let you save the deleted namespaces in step 2, then do this first.
    2. Double-click on the Software Component Version so that it comes up in the right pane.  Click on the change/edit button.  Delete all the namespaces from the SCV.  Save.
    3. Activate all change lists.  (It won't let you delete the SCV if you have uncommitted changes.)
    4. Open the SCV again (if it's not still open).  On the menu at the top of the right pane, go to Software Component Version...Delete.  You may or may not have to activate changes again.
    If I remember right, the software component will disappear automatically with the deletion of the last version.
    Hope this helps!
    --Dan King
    Capgemini

  • Substitute Component independent of the BOM

    Does Oracle have the concept of a substitute component, irrespective of the BOM in which it could exists?
    For example, Component A can always be replaced by Component B. This would be applicable to Product X or Product Y, both of them use Component A.
    Oracle seems to have the concept of a substitute component on a specific BOM (BOM_SUBSTITUTE_COMPONENTS).
    http://download-west.oracle.com/docs/cd/A60725_05/html/comnls/us/bom/bomtas05.htm
    Using this functionality, I would have to specify B as a substitute in two different BOMs - one for Product X, one for Product Y.
    I am wondering if there is a global "Subsititute Item/Component".
    Edited by: user8578890 on Feb 19, 2010 10:27 AM

    The substitute component relationship is used on Work orders and sales orders.
    And in both cases, you need a constrained ASCP plan to make use of the relationship.
    And no, there is no way in ASCP to globally subsitute A for B.

  • BOM changes inputting the BOM component -reg

    Hi Friends,
    we would like to know the BOM quantity changes happened for a particular BOm component .
    Using CS80 we have to input BOM header to know BOm changes , but our requirement is for a BOM component what changes are made and when they are made .
    Our BOM component say a paint part number is used in many BOM headers
    it is not possible to see CS80 by inputting one by one  BOm header and check whether the BOM component quantity changes are there .
    instead we would like to input BOM component and know when and what changes are made to its quantity (menge) in what BOM header by which use
    please help
    regards,
    madhu Kiran

    Dear Madhu Kiran,
    This is possible only if you are using ECM - Engineering Change number and you can obtain the details
    from the tables STAS,STKO,MAST &STPO.
    Without ECM I dont think its traceable.
    Check & revert back.
    Regards
    Mangalraj.S

  • How to get the Calculated Component Qty  of BOM in BI

    Hi Gurus,
    I am working on a requirement where I need to get the BOM Calculated Component Qty which we see in CS11.
    The way it is getting calculated in ECC is :- If a Component has an Assembly then We take the Base quantity of that material from STKO table and Take the Component qty of its component and multiply the Component qty of The component and the component qty of the Material for which the assembly exist and divide it by the base qty of the component  of the Assembly.
    We need to put the same logic in BI. can anyone please help me how i can accomplish this.
    Thanks!

    CLOSED

  • How to increase Decimal Points for the BOM Component Quantity

    Hi All,
    While creating BOM:
    Can anyone help me to know how i can increase the Decimal points for the BOM components quantity.
    I can able to give only upto 3 decimal points, but the requirement is more than that.
    I have increased the Decimal point value to 5 in transaction Code CUNI. but still it is allowing me to enter only upto three decimal places.
    Thanks and Regards
    Khadeer

    Khadeer,
    You would be better off changing the base quantity of the parent part.  Instead of "1 EA  parent contains .00003MG of  component" you could say "100 EA parents contain .003MG of component".
    Alternately, you could use different units of measure for your parent or component parts, which would be more suitable for the 3 place decimal limitation.
    I agree with Anil in that if you elect to change the decimals from standard, you could end up with huge changes that will propagate through every module in the ERP.  In my view, there is no need of this kind of headache.
    Best Regards,
    DB49

  • Bdc code to changing purchase group in the BOM component

    Hi We need to change the purchase grroup in the BOM comoponent level for multi level BOM's. Can we use CSAP_BOM_ITEM_MAINTAIN. any body having sample code for this......
    Thanks in advance.

    Hi,
    Did you check standard SAP transaction Mass change BOM CS20 or CEWB for changing the BOM purchasing group.
    Check and Revert,
    Santosh Sarda

Maybe you are looking for