Delete Trans requirmts generated for delivery (Shipment done, without PGI )

HI Friends ,
I have came across below issue-
A Z delivery type is being used to ship Material to vendor for external processing (Goods issue is NOT done against the delivery but is done against a Process order , it is a type of dummy delivery. Requirements should not get generated for such delivery.
Because of error in configuartion, requirements were getting genearetd which is now corrected , now no new requirements are getting generated for this delivery type.
Now the problem is - How to delete requirements generated for old deliveries (Shipmentment has already been posted , PGI can not be done). These deliveries are now affecting MRP calculations significantly.
To my knowledge , such deliveries can be cancelled only after cancellation of shipment , the solution is not acceptable as there are thounsands of such deliveries lying in system & it would be practically impossible to follow this route for resolution of this issue.
Is there any program / quick way to delete these old requirements without cancelling shipment / without doing PGI ?
Please help, Thanks.
Edited by: sandeep K on Feb 12, 2012 6:59 PM

Sandeep,
Because of error in configuration, requirements were getting generated which is now corrected , now no new requirements are getting generated for this delivery type.
One wonders how the business was able to manage with these 'thousands' of deliveries (which had requirements) for so long, prior to the correction of configuration.,,,
Anyway, if you are lucky, simply rebuilding the requirements file may solve your problem. Run report SDRQCR21 against these materials. Otherwise, for a mass change, you will probably need to develop some custom functionality.
Best Regards,
DB49

Similar Messages

Delete transf reqmt generated by delivery(without cancelling shipment/PGI)

HI Friends ,
I have came across below issue-
A Z delivery type is being used to ship Material to vendor for external processing (Goods issue is NOT done against the delivery but is done against a Process order , it is a type of dummy delivery. Requirements should not get generated for such delivery.
Because of error in configuartion, requirements were getting genearetd which is now corrected , now no new requirements are getting generated for this delivery type.
Now the problem is - How to delete requirements generated for old deliveries (Shipmentment has already been posted , PGI can not be done). These deliveries are now affecting MRP calculations significantly.
To my knowledge , such deliveries can be cancelled only after cancellation of shipment , the solution is not acceptable as there are thounsands of such deliveries lying in system & it would be practically impossible to follow this route for resolution of this issue.
Is there any program / quick way to delete these old requirements without cancelling shipment / without doing PGI ?
Please help, Thanks.
Edited by: Csaba Szommer on Feb 12, 2012 4:41 PM

Sandeep,
Because of error in configuration, requirements were getting generated which is now corrected , now no new requirements are getting generated for this delivery type.
One wonders how the business was able to manage with these 'thousands' of deliveries (which had requirements) for so long, prior to the correction of configuration.,,,
Anyway, if you are lucky, simply rebuilding the requirements file may solve your problem. Run report SDRQCR21 against these materials. Otherwise, for a mass change, you will probably need to develop some custom functionality.
Best Regards,
DB49

Distinguishing between IDocs for Delivery, Shipment and Invoice

Hi Experts,
I have a requirement where I am triggering IDocs from SAP for Delivery Document, Shipment and Invoice and sending them to a third-party middleware everytime they are created in SAP, by configuring output types for these documents.
I want to know if we have any field in these IDocs's Structures that can be used to distinguish between the different documents such that we can identify which document has been received based on this field (or combination of fields)?
I tried to use Document Category for this purpose, but this field is not available in Invoice and moreover, the IDoc Segment names are different for every IDoc's message type.
The key point here is that I am not allowed to do any sort of Customization in SAP to achieve this and I can only go about using the Standard Functions inherently available in SAP.
Please suggest a possible solution for this predicament of mine.
Thanks in advance.
Regards,
Keerthi

Hello Keerthi
I do not see where the problem lies.
We exchange via FTP share similar documents with one of our logistics partner:
Inbound delivery (VL33N) => sent as DESADV.DELVRY03 => converted on SAP-XI to TRADACOMS ORDHDR => file suffix .LTI
Shipping Order (VL03N) => sent as SHPORD.DELVRY03 => converted on SAP-XI to TRADACOMS ORDHDR => file suffix .LTO
I am not a fan of functional file names yet if the third-party tools is not capable to distinguish between the documents based on their contents at runtime then we need old-fashioned unique file suffixes.
Of course the two ORDHDR messages can be distinguished based on their contents. The message contains a TYP segment with the following qualifiers:
TYP/TYP2 = '0430' = (shipping) order (= outbound delivery)
TYP/TYP2 = '0660' = inbound delivery
From this logistics partner we receive two different kinds of DLCHDR (delivery confirmation) messages:
TYP/TYP2 = '0670' = Proof of Delivery for (shipping) order => mapped to STPPOD.DELVRY03
TYP/TYP2 = '0695' = Goods receipt for inbound delivery => mapped to WHSCON.DELVRY03
The files have different suffixes yet they are not evaluated. SAP-XI just picks both messages and evaluates at runtime whether it has to transform the DLCHDR into a STPPOD or WHSCON IDoc.
Regards
Uwe

FM or BAPI for Delivery Order Picking and PGI

Good day,
I would like to check with you all on any function module or BAPI which can perform delivery order picking and PGI ?
I did some research and found that a lot of people is introducing this FM "WS_DELIVERY_UPDATE_2"
but i'm not sure how this FM works. Can anyone provide some information for me on this function like what data to propagate into this FM and etc... ?

hi,please check this link.
Need to update picking,packing and PGI using FM "WS_delivery_update"
also,
for picking: WS_DELIVERY_UPDATE_2
pgi : BAPI_GOODSMVT_CREATE
thanks.

In STO(stock transfer)proforma invoice is done without PGI.

Hi
experts,
in our system for stock transfer (STO) PROFORMA INVOICE is done without POST GOODS ISSUE.
I want to make compulary PGI AND THEN PROFORMA INVOICE.(DELIVERY-PGI-PERFORMA INVOICE)
is there any USER EXIT OR BADI.
THANKS
AJAY.

Hi,
goto VTFL select Delivery type to Billing type to which you want PGI should be Checked before Invoice
Goto Header detail and change the Copying requirements as 311.
Hi , I have tested again in my system , It is working fine with Routine 311 - Copying requirements at item level (VTFL) , while creating invoice you will get log info saying document has allready been created, so check again once..
Ex : Copy controls (VTFL) = F8 to LF , Item category TAN (Standard) assign 311 To Item category.

Generate VICS BOL Number in User Exit For Delivery

Hello,
I have been asked to automatically generate a BOL for a delivery based the Voluntary Interindustry Commerce Solutions (VICS) Association specifications. However, I am having a difficult time finding the correct user exit in the delivery process.
Can any of you SD gurus point me in the right direction?
Regards, Dean.

I think I found the exit I needed EXIT_SAPLV56U_004. I was wrong about needing the exit for delivery, the requirement is the shipment.
With that said, I think I am on the right path but I was hoping that there was someone who has implemented the VICS Bill of Lading in SAP. I found that the Handling Units -> External Identification seems to have all of the foundation for generating the BOL per the VICS specification. However, there has been concern that if that was done, that something could cause an issue with Handling Units. Which we are using to generate labels for shipments.
So, has anyone used the Handling Units->External Identification for VICS Bill Of Lading generation? If so, anything I should be concerned about?
Regards, Dean.

Order deleted ,delivery was done

hello,
can any one tell me how we can delete a sales order when we have done the delivery

Hi
Vipin
One can not delete the sales order is the subsequent doc is exits If any delivery is done u can not delete he sales order. But U can short close the order by assiging the reason for rejection in sales order. But to delete the order u have to reverse PGI through VL09 and delete delivery through VL02N.
Once u reverse/delete all the PGI and DELIVERY only then u r able to delete the sales order.
Hope this will help you
Thx

How do I chg my Icloud account on my Iphone when I delete it it asks for a password for my old account which I don't remember

Can someone explain how I can change my Icloud id on my Iphone? When I hit delete it asks me for a password on my old account to turn off "find my phone" before it will delete. Since it is my old account I have forgotten what password I used and I'm concerened to trying a bunch without success and maybe blocking my phone.

If you still have access to your old email address, do the following:
Go to https//appleid.apple.com, click Manage my Apple ID and sign in with your iCloud ID. Tap edit next to the pimary email account, tap Edit, change it back to your old email account and verify it. Then edit the name of the account to change it back to your old email address. You should then be able to turn off Find My iPhone with your password. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back and change your primary email address and iCloud ID back to the way it was. You will then be able to go to Settings>iCloud and sign in with your current ID and password to reconnect to your iCloud account.
If you don't have access to your old email address, you will have to contact Apple to get them to reset the password for it so you can disable Find My iPhone and sign into your iCloud account. You will have to prove your identity to them in order to do so. You can either contact iTunes support for assistance with this (https://ssl.apple.com/emea/support/itunes/contact.html), or contact Apple Support (http://www.apple.com/support/icloud/contact/).

I downloaded the free upgrade for OS X Mavericks can you delete a download before installation ? i don't want it after reading reviews.

i downloaded the free upgrade for OS X Mavericks, can i delete this download before installation ? i don't want it after reading reviews.

Yes, it's in your Applications folder and is called "Install OS X". Make sure to empty your trash afterwards to clear the space.
Matt

I am trying to update my apps. When it prompts for my password my old deleted email address comes up. I don't even rember the password for that old email. How can I get to update my apps with my current email?

I am trying to update my apps. When it prompts for my password my old deleted email address comes up. I don't even rember the password for that old email. How can I get to update my apps with my current email?

All apps are tied to the Apple ID they are purchased with and is not transferable.
Delete app and download app with your new Apple ID.

No item generated for packaging material in delivery - packing (how?)

Hi all,
I am trying to customize packing for deliveries. I would like to have the packaging material as a line item in the delivery. I know this is possible but I can't seem to make it happen.
I have already ticked "Gen. pack.matl item" in my delivery type. Also, I have selected in the packaging type "B Item generation in first packed delivery" for "generatedlvItms" option.
Now, in the delivery after I packed the items, no line item was generated in the delivery for the packaging material. The "No. of Packages" in item overview is correct and the status is "C" completely packed. Btw, I am using manual packing here.
Is there some more configurations I missed here?
Thanks in advance for all your help.
Edited by: Ritchie Caleb Chua on Aug 9, 2011 3:53 AM

I assume that your basic HU configuration and master data have to be ok because you are able to pack your goods.
1) Are you able to add your item w/o HUM (=not by creating a HU, just adding the material as a simple item) to the delivery? /For this you need define a record in T184L (where usage "PACK" is not there)/.
If you are able it means that e.g. your delivery copy control settings are ok (V_TVCPLAK; delivery type: LF and sales doc type: DL --> HUPM/DLN item categories in your case)
2) If you are able to
- create the handling unit manually in the delivery
- add the packing item to the delivery (w/o HUM) and also have the T184L with usage "PACK"
- item generation is maintained for your packing material time "A" or "B" in field V_TVTY-KZPGN
- plant determination for packing material type ("A" or "B" in field V_TVTY-WERFD)
it should work in my opinion (for delivery type LF).
Edited by: Csaba Szommer on Aug 9, 2011 1:37 PM

Delivery relevant only for TD shipment.

Hello,
In an IS-OIL system, how to make the outbound delivery only relevant for TD shipment. i.e user should not be able to process it with VT01N transaction.
Is this possible in IS-OIL system. If yes, please let me know the IMG settings required for this.
<b>Useful answers will be rewarded with points.</b>
Regards,
Stefan.

Hi,
Stefan,
You can check to create TD shipment through transaction
O4F1...(Create a Shipment )
O4H1(Create/Change Delivery Confirmation)
O4G1*(Create a Loading Confirmation is not used for STO)
However I am sure about the settings of this.
I wish I could help you more.
I will try to fetch some information.
Hope it helps.
Thanks and Regards
Rohit.

I accidentally deleted my iPhoto a while ago and don't have money to purchase it is there any way to get it back or download it for free?

i accidentally deleted my iPhoto a while ago and don't have money to purchase it is there any way to get it back or download it for free?

Howdid you buy iPhoto originally? Did it come preinstalled on a new macwith MacOS X 10.7 or later? Then you can download it from the Purchased tab of the AppStore:
See: OS X: About OS X Recovery
Restoring iLife applications after Internet Restore of OS X
If your computer came with OS X Lion or later and you erase your hard disk and install OS X, you can download iPhoto, iMovie, and GarageBand from the Mac App Store.
Choose App Store from the Apple menu.
Enter your Apple ID and password when prompted.
Click Purchases.
If you haven't previously accepted your bundled iLife applications within the Mac App Store, you should see your iLife applications appear in the Accept portion of the screen. Click Accept.
You may be asked for your Apple ID and password once again. Your iLife applications now move to the Purchased section. These applications are part of the software that came with your computer. Your account will not be charged for them. Click Install to complete installation of your applications.
If your Mac came with an earlier system, reinstall iPhoto from the bundled application installation disk.
And if you bought an iLife disk, use that to reinstall.

No purchase order item was generated for shipment cost item

Hi Gurus,
When I am creating with reference to shipment no & shipment cost type, When I save the shipment cost, See the logs at the time saving.
The logs are showing in red :
No purchase order item was generated for shipment cost item.
Message no. VY633
Please enter a valid partner role.
Message no. ME351
May I know the reason for showing red logs at the time of saving. (When I check logs, it is showing red colors).
Please advice if I miss any thing.
Regards
Rakesh

Hi Rakesh,
Your customising is incomplete. Notes 506605 & 940532 will help you on this.
regards, david

Routes For the Shipments without Considering the Delivery Routes

Hi All,
we are working in transportation related project and We are using the Route determinations to the Shipments.
I wanted to understand is there any way that we determine the Route directly to a Shipment Type without using the Leg Determination from the delivery Routes.
These routes would be diff form the delivery Routes and they need to get directly determined at Shipment Document Level.
Appreciate the valuable Answers
Thanks
Mahesh

Hi Mahesh,
-->As per the standard route will be determined in the delivery from the document it will copied to the shipment through copying routine which you are maintaining in the shipment document type detail screen.
-->If you don't want to copy the route from the delivery then change the copying routine in the shipment document type.
-->You can enter route manually in shipment document.
I hope it will help you,
Regards,
Murali.

Delete Trans requirmts generated for delivery (Shipment done, without PGI )

Similar Messages

Maybe you are looking for