Deleted message not removed from iPhone Inbox

Since updating my iPhone 3G to 4.01 I have found that when I delete messages from the inbox the messages are not completely removed from the inbox. I am left with a blank unread message. The only way I can completely delete is to turn the phone off and restart. Is anybody else having this problem? I have also found that I lose service in places I have been able to use the phone.

theguz4l wrote:
bump ... any response RIM?
While VF provided a reply above, such is never expected here...refer to this information posted at the top of every page on this site:
Also, given VFs reply above, you might want to contact your carrier for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Workitem is not removed from User Inbox

Hi,
There is requirement, when the PR is created by user, first it has to go his department Head and then to Manager, AGM, GM, etc. There are different departments.
I'm maintaining organizational structure and giving positions in Release Strategy. Now how can i know who has created and to whom it has to go first. Shall i create different release strategy for that ?? Or is there any other way ??
And i tried to create custom workflow and using two release steps instead of one. And giving Rule in my first release step. And in second release step i'm using the strategy. When i create the PR and release, it is not removing from User Inbox.
Do anyone know what could be the problem ??

Hi,
From your requirement, its not a good idea to have all department heads assigned to a single position.
But, you can have different positons for different departments and the association between department and the corresponding position number can be maintained in ztable. Then have a custom rule based on function module which will make a call to this ztable and find the corresponding postion given the department of user, get this position out and use it as agent assignment in step. However to use above first you should be able to find the Deparment to which a given user belongs to.
the position that you are talking about in your question, is it a position with relevance to HR structure or is it just that you have created for workflow purpose. In general its a good idea to have bit strong dependency with HR structure rather than going for workflow specific positions. If your position is a HR position then probably with bit of reengineering the HR organization structure with respect to your departments would be good and with a good design of org structure you can also get rid of any new custom table to maintain the relation between department and corresponding position.
Good Luck !!
Regards
Krishna Mohan
ooops !! many replies came in while drafting this mail itself, i guess rule using custom table already tried !!
Edited by: Dubbaka Krishna Mohan on Jan 29, 2008 9:20 AM

Messages not removed from Inbox when deleted on iphone

My company has an exchange based mail system and they provide imap access for devices like the iphone.
I set up the iphone to connect to the server and can read messages just fine. I set the Deleted items option in the Settings app for Mail to be the Deleted Items folder on the server.
When I delete the messages on the iphone this is what happens:
1) The message disappears from the Inbox on the phone.
2) The message appears in the Trash on the phone.
3) The message appears in the Deleted Items folder on the server (as viewed from my normal work computer).
4) The message stays in the Inbox folder on the server.
So, in sum, things do what they are supposed to do on the phone. On the server, I wind up with 2 copies of the same message - one in Inbox and one in Deleted Items.
I will point out that the same behavior occurs when I try to move an item from any folder to any other from the iphone. The message winds up in both the original and the target folders....
What do I need to do to set it up so that messages are removed from the originating folder on a delete or move?
Thanks

Sounds like typical POP behavior.
Is your mail account POP or IMAP?
If POP, then your mail activities are normal, that's how POP operates.
If it's IMAP, contact your server admin, as IMAP should be reflecting all activity across all devices with that specific account on it.

Oracle AQ: Message not removed from source queue after propagation

Hi.
I have been playing around with a test setup for a "fanning out"-propagation system.
I have created three queues, SRC_Q, DEST_Q and DEST2_Q.
The propagation seems to work fine, the messages that I put on the SRC_Q get propagated to the destination queues. However, after propagation the message does not get removed from the source queue. Could anyone tell me why?
I am using Oracle 10g.
Here is my setup:
--Test payload
CREATE OR REPLACE TYPE test_payload AS OBJECT(
test_id NUMBER,
test_dt DATE);
commit;
DECLARE
subscriber SYS.aq$_agent;
BEGIN
--- Create Originating Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'SRC_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'SRC_Q', 'SRC_MQT' );
DBMS_AQADM.start_queue( queue_name => 'SRC_Q' );
--- Create Destination Queue and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest_Q', 'Dest_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest_Q' );
--- Create Destination Queue2 and start it
DBMS_AQADM.create_queue_table( queue_table => 'Dest2_MQT', queue_payload_type => 'Test_Payload',
multiple_consumers => TRUE );
DBMS_AQADM.create_queue( 'Dest2_Q', 'Dest2_MQT' );
DBMS_AQADM.start_queue( queue_name => 'Dest2_Q' );
--- Add Subscribers and schedule propagation
subscriber := SYS.aq$_agent( 'test_sub', 'Dest_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE);
subscriber := SYS.aq$_agent( 'test_sub2', 'Dest2_Q', NULL );
DBMS_AQADM.add_subscriber( queue_name => 'SRC_Q', subscriber => subscriber , queue_to_queue=> TRUE );
--Propagation to queues
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest_Q' );
DBMS_AQADM.schedule_propagation( queue_name => 'SRC_Q', destination_queue => 'Dest2_Q' );
commit;
END;
--Put something on the queue
DECLARE
message_handle RAW( 16 );
MESSAGE test_payload;
nq_opt dbms_aq.enqueue_options_t;
nq_pro dbms_aq.message_properties_t;
begin
nq_opt.visibility := dbms_aq.immediate;
nq_pro.expiration := dbms_aq.never;
MESSAGE := test_payload( 2, SYSDATE );
DBMS_AQ.enqueue( 'SRC_Q', nq_opt,nq_pro,MESSAGE, message_handle );
COMMIT;
END;
I am really stuck with this problem so I really hope somebody have some advice on what I am doing wrong.

I am also facing a similar issue. I have a multiconsumer queue. The message has been dequeued but the message is still present in the queue table and the message is also present in AQ$<queue_name> and the state is being shown as 'processed'.
This all was working fine few days back and somehow stopped working all of sudden. The DB version which I am using is - 11.1.0.7.0. Any help related to this will be greatly appreciated
-AA

Podcasts not removed from iPhone after playing

Hi
Since updating to iOS 5 on my iphone 4, I've been having a few issues with the syncing of podcasts. For some, not all, of them, once I've fully listened to them on my iPhone, syncing with my macbook pro doesn't remove them, even though itunes on the mac has them shown as played, and the iPhone's podcast settings within itunes are set to only sync the last 10 unplayed podcasts, with the individual podcast episodes in question no longer being ticked in the podcasts settings page. Coincidentally, or perhaps not, on the iPhone, these podcasts have no date held against them and also have weird running times of like 0:02 or 0:03, when in iTunes on the Mac they're detailed correctly.
This isn't a massive issue, but it's becoming a pain in the neck. Has anyone else encountered it, or actually found a reason / fix?
Thanks

welcome to my world....
i have had this at least three times now in the past month.
I too had to do a factory reset and set up a a new phone.
i read an article about it being a known issue and something to do with duplicate tracks causing it to hang during sync. it then fills up the available space with the dreaded "other" data and hey ho you have no music.
have a look at this, hope it helps and hope Apple get it fixed as it is affecting a lot of people
http://robservatory.com/a-nasty-little-itunesios-bug-may-be-causing-media-sync-i ssues/

Items are not removed from Workflow Inbox

Hi all,
Im having problem with our workflow. Below are the details
SCENARIO:
User A creates a PR. The PR is then forwarded to user B for approval. Once the PR is approved by user B, it is forwarded back to user A for notification purposes. User A then executes the PR and it is automatically forwarded to user C for processing.
THE PROBLEM:
When user B approves the PR, his/her inbox should be cleared once the PR is forwarded to user A. The problem is that, out of the 45 line items present in the PR, only 38 lines were cleared from the inbox. The remaining 7 items were retained. However, when we try to view the PR from user A, there are 45 line items and they are complete.
QUESTION:
What causes the 7 line items to be retained in user A's inbox? How do we clear them?
Any output will be highly appreciated.
Thanks

Hi,
The user B approved the PR accessing the transaction SBWP or via PR transaction directly?
If via PR transaction directly, then your workflow needs a Wait Event step.
Regards,
Kleber

Help: PReqs blocked by requestor not removed from approvers Inbox.

Hi Everyone,
We have implemented a Release Strategy with classification for PR Approval. Currently the client is complaining that PReqs that have been put into blocked status by the requestor are still appearing in the approvers WF Inbox. Is there a way to remove such PRs from the approvers inbox?
Any help is appreciated.
Thanks,
Satish.

Hi Ronen ,
I Applied the SAP Note :1676067 - Automatic replacement of work items.
Created Table , domain and DataElements also for Manual entries Also .
While maintaining the Dialog Maintainence entries maintained are Asynchronous , 0 , 0 .
And scheduled the job.
But still it is not changing the status from Inprocess to Ready for workitems .
Can you suggest what else is supposed to be checked or maintained .
Thanks in Advance.

Played Podcasts are not removed from iPhone despite iTunes settings?

Hi,
In iTunes I have set my general Podcast settings to only sync unplayed podcasts to my iPhone. However, when synced, the played podcasts remain on my iPhone. Can anyone help?
Many thanks

I have exactly this problem. Alongside the podcasts I subscribe to via iTunes, I download some random ones from time to time via the iPhone itself. Now I simply can't rid myself of the files - they show on the iPhone screen but not when connected to iTunes and they are restored to my library every time I reconnect to the Mac. There seems to be no way of deleting the things - I even tried de-synching all podcasts and re-synching again but this didn't work either.
This only seems to have happened since I upgraded to iOS 5. Mine is a 3gs by the way.
Any answers anyone?

Yahoo mail not removed from inbox ios7

I have an iPhone 4s with ios 7.0.2. I have 2 different yahoo accounts that are showing the same issue. If I delete or move an email from my yahoo inbox on my PC either via web or mail client, they still show in the inbox on my iPhone. Even if I manually update the accounts (swipe down) they still are there. I have tried waiting 10-15 minutes with the same result. If I use the task manager to close mail and then re start it, they immediately are removed from the inbox. Has anyone else noticed this issue?

Check whether the same happens if Preferences > Accounts > Advanced > Remove copy from server is OFF, i.e. if messages aren’t supposed to be removed from the server at all. I’ve seen it reported in other cases that messages were removed from the server even with that setting OFF, but it ended up being a server issue that happened when using other mail clients as well — and IIRC it also was a Yahoo account...
Try disabling the account in Mail (i.e. turn OFF Preferences > Accounts > Advanced > Enable this account), or just don’t run Mail at all, set up the account in another mail client such as Thunderbird, and see what happens.
If you set up the account in Thunderbird, refuse to download anything when asked to do so immediately afterwards (so that you can customize the server settings first), then in the account’s Server Settings turn ON Leave messages on server if you don’t want the messages to be removed from the server as a result of downloading them with Thunderbird. If messages that you would like to have in Mail end up being removed from the server nevertheless, you may use Eudora Mailbox Cleaner to import them from Thunderbird into Mail.

Deleted attachments are not removed from Content Server

We have setup Content Server to store business documents and create attachments in documents in CO. Both types are stored ok and can be opened without any problems. After deleting them though, they disappear from the Attachment List but when looking in CS, attachments created on the document still exist in CS. Stored business documents on the other hand are removed properly.
Looking at statistics in CSADMIN shows that the deletion of the created attachment does not increment the "delete" counter.
Any ideas on why the created attachments are not removed from CS upon deletion?
Thanks

We have solved this issue now. By design, the attachments are not removed directly from the content server upon deletion; Instead you will need to run report RSBCS_REORG to completely remove them from the Content Server.
Edited by: Christian Nordvaller on Jan 26, 2010 3:53 PM

After deleting users they are not removed from portal30.wwsec_person

I am building a customized script to carry on users self registration.
the script is going great and user is created and i can log into portal
successfully with this new created user.
I relogin as portal administrator and delete this new user and now if i tried
to list portal users I cant see the user.
But when I try to rerun my script to recreate this user again it fails when I
investigated I found that it fails because the entry of this user is removed
from portal30_sso.wwsec_person while it still exists in portal30.wwsec_person
so the script fails as there is duplicate in primary key.
Is this a bug in portal 309 that when the user is deleted it is not removed
from portal30.wwsec_person

This is actually a combination of intended behavior/design and a bug.
Let me first explain why there is a user in both the PORTAL30_SSO schema as well as the PORTAL30 schema.
The definition of the user, that can log in, and defines the single sign-on account, is the user's entry in the
WWSEC_PERSON$ table in the PORTAL30_SSO schema. The SSO server actually just uses a subset of the
columns in this table -- those defined in the WWSSO_SSO_USER view.
The same table exists in the PORTAL30 schema, because there is a lot of common infrastructure code
shared by both applications (Login Server, and Portal). The Security and Session Management code
is common, and this code includes the dependency on the WWSEC_PERSON$ table.
Now, assuming that the code was independent (for the sake of argument), why do we still have an entry
for the user in both schemas? As I mentioned earlier, the user entry in the SSO schema is the "master".
The SSO server can have multiple partner applications connected to it. Indeed, on my.oracle.com, the
login server there has at least 4 portals hooked up to it, and a few other non-Portal partner applications,
such as Oracle Mobile.
Each partner application may have a local user profile that it uses to store application specific attributes
of the user. This is stuff that the Login Server is not interested in, and could in no way predetermine for
all conceivable partner applications. So, it is not unreasonable for each partner application to also have
a user record which stores additional attributes of the user (not related to user authentication), and which
can be used to reference other user-related data. For example in the Portal, all the user's privileges
and group memberships are tied to the Portal's user record (foreign key constraints). So, the Portal
being just one partner application of the Login Server, it adhere's to this model and has a user entry
in it's schema corresponding to the user entry in the Login Server.
When a user logs on and accesses a partner application for the first time, the partner application (read Portal)
is expected to automatically create a local profile entry for the user on demand. The Portal does this.
In 3.0.9 and previous versions, to delete a user, you need to delete the user in the Login Server AND the Portal.
The only way to do this is to first delete the user in the Login Server, using the User Portlet.
Then type the user's name into the Portal User Profile portlet (they won't be in the LOV anymore since
you just deleted them from the login server), and click Edit, then Reset To Defaults (this means delete).
You will then get a User Not Found error, since the page is trying to go back to show the details about this user.
(All this has been fixed in 9.0.2 v2, by the way).

I got a new iphone 6. When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup. How do I get the most recent backup onto my new phone?

I got a new iphone 6. When I restore my phone from my icloud backup my most recent photos and messages not restored from icloud backup. How do I get the most recent backup onto my new phone?

Hello, Anita.
Thank you for visiting Apple Support Communities.
I understand that you are wanting to restore your new iPhone 6 from an iPhone 5 backup. This sounds like the iOS version of your old iPhone 5 may be newer than what was installed on your iPhone 6. Try going through the steps in the article below.
iOS: Unable to restore from backup of a newer device
I would also check to see the backup dates in iTunes and if the backup is located on iCloud instead of iTunes.
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes
Cheers,
Jason H.

When i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email

when i want delete music in my ipad i make sync in itunes without music but the music not remove from ipad i get problim please help me my email

hi i think you can used itools is very esye for add and delete eny thing that is link http://www.itools.cn/multi_lang_pc_download.htm

Message "not downloaded from server. You need to take this account online

After upgrading to 10.4.9, when I click on any of the old emails in my inbox I get the message "this message not downloaded from server. You need to take this account online in order to download it."
I can still read all email in any other mailbox.
I can read all email received after upgrading.
I appreciate any help.
G4 17 inch Mac OS X (10.4.9) 1 gb ram

You upgraded to 10.4.9 from what?
If you upgraded from Mac OS X 10.3 or earlier, the problem is that the conversion from Mail 1.x to Mail 2.x is broken. Take a look at the following thread to better understand the problem:
Help! "You need to take this account online in order to download it."
More specifically, if this is a POP account, the following procedure should allow you to fix the Inbox problem. A similar procedure should allow you to fix other mailboxes that might also be affected:
1. Quit Mail if it’s running.
2. Make a backup copy of the ~/Library/Mail folder, just in case something goes wrong while trying to fix the problem. You can do this in the Finder by dragging the folder to the Desktop while holding the Option (Alt) key down, for example. This is where all your mail is stored.
3. Create a new folder on the Desktop and name it however you wish (e.g. Inbox Old). It doesn’t need to have an .mbox extension.
4. In the Finder, go to ~/Library/Mail/POP-username@mailserver/INBOX.mbox/.
5. Move the files mbox and Incoming_Mail out of INBOX.mbox, into the Inbox Old folder just created on the Desktop. These files contain all the messages that were in the mailbox before the upgrade to Tiger, and maybe even some messages that had been deleted. mbox is the most important. Incoming_Mail may or may not be present.
6. Move any strangely-named Messages-T0x... folders to the Desktop (not into the Inbox Old folder). These folders are to be deleted after fixing the problem. They are temporary folders created during an import or an indexing process, and Mail should have deleted them when done. Their presence is a clear indication that something didn’t work as expected. If you’ve been using Mail after the conversion and have already tried to fix the problem by rebuilding the mailbox or something like that, they might contain messages that are neither in Messages proper nor in the mbox file, so keep them around until the problem is fixed.
7. Move everything else within INBOX.mbox, except the Messages folder, to the Trash.
The result of the above should be that INBOX.mbox contains the proper Messages folder only, and the Inbox Old folder on the Desktop contains the mbox and Incoming_Mail (if it exists) files only. Now, proceed as follows:
8. Open Mail.
9. The account’s Inbox should properly display in Mail as many messages as *.emlx files are in ~/Library/Mail/POP-username@mailserver/INBOX.mbox/Messages/. If that’s not the case, select the mailbox in Mail and do Mailbox > Rebuild.
10. In Mail, do File > Import Mailboxes, choose Other as the data format, and follow the instructions to import the Inbox Old folder that’s on the Desktop.
As a result of doing the above, some messages may be duplicated now. Andreas Amann’s Mail Scripts has a Remove Duplicates script that you may find useful.
Do with the imported mail whatever you wish. You may move the messages anywhere you want and get rid of the imported mailboxes afterwards.
If all is well and you don’t miss anything, the files on the Desktop can be deleted, although you may want to keep them for a while, just in case.
Take a look at the following article (also referenced in the thread I mentioned at the beginning of this post) to learn what you might have done before upgrading to minimize the risk of this happening, and what you may do after fixing the problem to avoid similar issues from happening in the future. DON’T do now what the article suggests, though, as that would make things worse in the current situation:
Overstuffed mailbox is unexpectedly empty
Ask for any clarifications or if you need further assistance.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

New messages not appearing in the INbox, only in 'All Mails'

Hi,
I'm using Gmail and iPhone 4.2.1. I'm managing gmail on the iphone using the Google Mail imap account.
When my browser is open, new messages are delivered to the INbox, as well as to my 'All Mail' folder, which is normal behaviour. When I feth gmail on the iPhone, same thing: I see the messages in both folders.
But, when my browser isn't open and I fetch new messages on the iPhone first, then these new messages are only stored in the "All Mail" folder and not in the INbox? Later, when I check in my browser, same thing: the fetched messages are missing from the INbox folder, and thus, I have a gap in the INbox.
How can I fix this?
Thanks!
Kris

this can be closed

Deleted message not removed from iPhone Inbox

Similar Messages

Maybe you are looking for