Deletion during release/reject of FIPP

Hi all,
sorry if I often ask something but there are so many issues around workflows...
As written in subject, I need to intercept the event FIPP.deleted when a work item with FIPP.release method is executed and the agent decides to delete the parked document without releasing or rejecting the document.
A notification will reach the initiator and the work item (release) must disappear in the inbox.
I know there are WAIT FOR EVENT steps but I need to use it as a third outcome of release work item (maybe). Any help is appreciated. Thanks.
Angelo

Hi Angelo,
Any particular reason to have it as an outcome?
If not, then you were on the right track: create a fork - 2 branches, one necessary. One contains your 'main flow', the other has a WAIT FOR FIPP.DELETED step followed by a send a mail notification (or setting a flag which you can check after the fork). When the fork completes with one necessary branch, it will cancel anything in the other (i.e. your release step).
Hope that helps,
Mike

Similar Messages

  • Release Rejected - Message no. C2039 during Planned Order Conversion

    Dear Experts,
    I was trying to convert a Planned order to Process Order via COR7, and it prompted the following message,
    Release rejected (check log) - message no C2039.
    But when I create Process Order manually via COR1 for the same material master and release, it works.
    Does anyone got any idea?
    regards,
    Abraham

    Hi,
    1. Check the Storage Location for the components in BOM & Check the availability of stock for the Missing Parts in Header.
    2. Check the reservation for the "Missing Component's".
    3. Reschedule the Planned order in MD12 before conversion.
    4. Also check whether "Serial no.Profile" is activated in Material Master , if yes please go to CO02- Header->Serail Nos-> Create Serial No (Either Manually or Automatically). Then release the Order.
    Hope it helps.
    Regards,
    Sundhu

  • Release rejected - Number Range not found.

    Hi,
    Iam creating a Rework Order RW01 order type.settings are almost same as PP01.
    When I try to release the order it shows Release rejected and check log .
    In the log I find below message thrown.
    " You must enter the batch for material XYZ
    *Message no. CO691"
    However when I the enter the batch manually add try to release it again it shows Release rejected and check log .
    In the log I find below message thrown.
    " Number range  not defined
    Message no. 26023
    Diagnosis
    You have enter number range  for the document type, but this number range is not defined for the number range object "document".
    Procedure
    Check in Customizing (Document management -> Control data -> Number ranges) which number ranges are defined.
    If you want to enter a number range that has not been defined for the document type, contact your system manager. It may be necessary to create a new number range."
    I have done the number range for order type RW01 in CO82 as well .
    Is there anything I miss in Order Type configuration or Batch Management.
    In PP01 order type my Batch updates when I release my order , Same setting is for RW01 as well.
    Production Scheduling profile is also same for both.
    Regards
    Bhgl

    Dear,
    Please check the number range in CO82 or OPJH for your order type RW01.
    Also check the component has determine the batch.
    In the release control is set to user to decide (TCO11-FRBATCH = '1') or release despite of missing parts (TCO11-FRBATCH = '2') in Transaction OPJK
    For all these components it is stored in the material master that a batch determination should be executed before or during the release (KZECH = '1' manually, KZECH = '3' automatically) and no batches have yet been assigned to these components before the order is saved.
    Regards,
    R.Brahmankar

  • JSESSIONID not deleted during SSO logout

    We have a ADF/Struts webapp on OracleAS 10.1.2.0.2 protected by SSO (mod_osso). When a user logs off from SSO, all a success mark is shown from each partner app where the user was logged in (including our application), but the remains logged in to the webapp nevertheless.
    I have tracked the problem down to the JSESSIONID cookie, which causes the user to be logged in the application as long as the cookie is present. All the strictly SSO-related cookies are deleted during the logout except the JSESSIONID for the SSO partner webapp. The user is always correctly logged out from e.g. OIDDAS after logout.
    After logout, if I go and destroy the cookie either by manually deleting it from my browser or by closing the web browser, mod_osso shows immediately the SSO login page. i hav also verified by tracing the HTTP traffic that it is the JSESSIONID cookie that causes this behaviour.
    In Metalink article Note:258200.1, it is said that JSESSIONID cookie is not directly related to SSO so why is it a key factor when deciding whether a user actually is logged off from the application? Furthermore, the metalink article clearly states that the JSESSIONID cookie is deleted during logout (which is not the case).
    As far as I remember, we have never been able to see it working in our setup.
    Can mod_osso/SSO/whatever be configured do delete the JSESSIONID during the SSO log off or what would be the correct way to get the logoff working? Furthermore, shouldn't mod_osso actually ignore the JSESSIONID cookie and only care about the SSO-related cookies when deciding whether to allow the user in?
    TIA,
    Markus

    We solved the problem by implementing a Servlet filter that takes care of invalidating the user session if the user has logged out (either explicitly or through Global User Inactivity Timeout).
    The solution follows the guidelines described in
    Oracle Identity Management Application Developer's Guide section "9.4.1 Single Sign-Off and Application Logout" (http://download-uk.oracle.com/docs/cd/B14099_19/idmanage.1012/b14087/mod_osso.htm#BJFGAGIA)
    IMHO, the solution is a bit overkill, but it solved the problem. We haven't yet tried the solutions proposed by Rodrigo.

  • Error during releasing a TR

    Hi,
    I am facing a problem during releasing a request::
    Calling the transport control program tp
    "tp EXPCHK WADK933459 pf=/usr/sap/trans/bin/TP_DOMAIN_WAD.PFL -Dtransdir=/usr/sap/tr"
    which checks the export requirements, returned the following information:
    Return code from tp: 0212
    ORACLE 9.2
    R/3 4.6C
    AIX
    Regds,
    Mofizur

    Test call of transport control program (tp) ended with return code 0212
    Diagnosis
    Your transport request could not be exported, since all requirements were not fulfilled.
    Calling the transport control program tp
    "tp EXPCHK WADK933459 pf=/usr/sap/trans/bin/TP_DOMAIN_WAD.PFL -Dtransdir=/usr/sap/tr"
    which checks the export requirements, returned the following information:
    Test call of transport control program (tp) ended with return code 0212
    Return code from tp: 0212
    Error text from tp: ERRORS: Highest tp internal error was: 0212
    System Response
    Further processing is terminated.
    Procedure
    Check the following points:
    Feasibility of the transport control program tp
    Parameter settings in the transport profile
    Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
    Write authorization for the subdirectories
    Write authorization for the files of the subdirectories cofiles, data, log, sapnames
    Release the request again when the error has been removed
    Edited by: Mofizur Rahman on Jun 17, 2008 2:37 PM

  • Service Order - Status Release Reject "RELR"

    HI Experts,
    When i am created a service order from repair order automatically, it is getting created with the status release rejected "RELR", It should be released automatically from the repair order, wich infact was happening but now due to some reason this functionality not working,
    Pls suggest what i should check for the same so that this should work fine
    Urgent !!
    Rgds

    Bharat,
    could you check whther any pemits assigned to the service order or not. The auto release for the ordertype is on, and because of ome reason system is not able to release the order.
    check the Permit, and release it , then try to release it manually.
    Prase

  • Process order release reject.

    Hi Experts,
    Question related to Make to order (MTO)
    I was created one sales order successfully.
    Then I run MRP and i got Planned sales order.
    After that I converted that planned sales order sa process order.
    When i click on release icon, my proble arised.
    that is Released rejected.
    I checked the stock availability in MMBE/MB52, there I found lot of stock.
    But in the Process order message is comming that missing parts list.
    Can any body give me solution for how to release the process order.
    by
    M.Anand (Hyderabad)

    Hi,
    This has already been replied to in your earlier post...!!!
    check and revert.
    Cheers,
    Rajan.

  • PO Release / Reject WorkFlow

    Hi
    I have a scenario for PO Release / Reject Strategy . It is a Three Level Approval Process . If a PO is saved , the Work Item has to goto first Approver for Release and after he approves it has to goto Next so on . If the Approver reject it has to go back to the Previous approver and if he rejects it has to goto the Previous guy and so on  .How can it be done in one WorkFlow Process.
    Thanks

    Hi BK,
    you need to create a process logic here.
    I doubt if std.WF template has this logic.
    In PO tables, there is a field which ammends 'X' in every release done.
    Say there are 3 levels of approver, if approver 1 approved, the field would be 'X' if 2 approves it would be 'XX' and so on till eight levels (if Release Strategy is maintained)
    So somewhere in your logic you need a container which fills this and using this container you need to track the approver and send the rejection notification.
    So hint, combination of LoopUntil Step, CheckCondition Step and may be Process Control Step at the end.
    Hope it helps.
    Aditya
    Edited by: Aditya Varrier on May 16, 2011 2:06 PM

  • Confirmation status I1016 release rejected

    Hi SRM gurus,
      We are working on classic scenario on SRM 5.0. We created a shopping cart, PO and confirmation.
    We have the status of the confirmation as I1016 release rejected when we do the conf. from EBP. If we do the GR in the backend the conf. is updated.
    For all PO's the EBP conf. is not transfered to the backend. We tried to run the clean req req report manually. We tried to search thru the OSS notes and also thru this forum but could not find worthy info.
    Can any one suggest what could be possible reasons?
    We have our workflow working fine with the status as approved. If we try to replicate the same manually with the BBP_PD_CONF_GETDETAIL it gives the same status.
    Is there any way to change the status of the conf. so that it will be updated in the backend.
    Workflow conditions are working perfect as there is no workflow error also.
    Best regards,
    Sridhar.

    Hi
    Please try this ->
    The status of the Rejected shopping cart can be seen under Stats : head.
    You can see the status in CRM_JEST table using the GUID of the shopping cart.
    The status will be updated with I1016 (Release rejected) from I1015 (Awaiting approval).
    Also look in the transaction - bbp_pd .
    See related Notes ->
    Note 958297 Search for confirmations with transfer errors
    Note 537459 Confirmation cannot be reversed despite invoice quantity = 0
    Note 1073012 Search for Confirmations with Status 'All'
    Note 1014108 No DocB status change after SRM document is rejected
    Note 827638 Populate possible statuses for PO correctly in extraction
    Hope this makes you clear. Clarifications are welcome.
    Regards
    - Atul

  • Process Order release rejected

    Hi All,
              I want release the process order but it shows the error like it is rejected .  in that i have seen the master data all are assigned to that process order and it shows like this  release rejected (check log) message no:C2039. what is this meaning

    Hi,
               i got this errors.       
            E     CO     288     1     1     70000862               Order type PI01 plant 1000: No checking rule maintained for operation
         E     CO     118     1     1                    Release of order not possible
    Edited by: chakri_man on Oct 3, 2011 11:32 AM

  • Control availability check during release of production order

    friends,
    Can you guys help me find the user exit/BADI which will allow me to control the release of production order after the availability check is complete.
    In detail, the scenario is that : based on a flag on material master, I should be able to ignore this product's availability during release. I cannot change the availability check to "KP" ( No check) as this product can be sold seperately. So what I thought was that if I get to control the availability check during production order release I would be able to ignore this product before check or may be after check and before the status change.
    I found PPCO0021 exit and function module EXIT_SAPLCOZR_003 which is actually intended for release control for automatic batch determination. I am not sure if I can use this.
    Please let me know if you guys have any idea.
    Thanks
    Prod_Planner

    Let me rephrase the scenario :
    I have a production order for a product P1 which consumes raw materials R1 and R2. R1 is supplied by a nearby vendor every 1 hour to my plant so I do not need to worry about the availability of it when releasing the order but R2 availability should be taken into consideration. So, function 1 or 2 in OPJK will not work (as release need to be stopped if R2 not available) hence I will be using 3. If I use 3, R1 availability is also considered hence the whole order is not released. I will maintain a flag on material master so if R1 has flag, I need to ignore R1's availability but still considering R2.
    As mentioned, I found PPCO---21 which could help me but need your help to understand if there is any other way.
    Thanks
    Prod_Planner

  • Project release rejected due to no material component

    Hi All,
    I am working on a cost project, i donu2019t have any materials to add my project there are only activity cost is booked to a person working at awork center.
    when i am trying to release a project system is throwing a error 'no material components. Release Rejected'
    Please guide me to resolve this issue.
    Thanks & Regards

    hi ahmed,
    check control keys  for activities.
    vengaiah chowdary
    Edited by: vengaiah chowdary pachava  chinna on Jun 12, 2010 6:14 PM

  • Application error during release to LiveCache

    Hi Experts.
    I got some orders stucked in my Outbound Queue in ECC side as SysFail with the error "Application error during release to LiveCache". When I click to activate the queue the order is released and transferred to APO. The question is Why is getting stopped?
    Thank you!

    Hi Everybody.
    SAP Provided me a note to implement to fix this issue. The note number is 1238616 but I need to understand how to reproduce this error in SandBox to implement this note and check if the problem will get fixed...
    Currently my OSS is assigned to SAP (Live Cache team) to let me know the root cause for this problem and how to reproduce in lower environment (sandbox) to implement the note and check if the problem will get fixed.
    As work around we are manually activating these errors in CIF queues that are getting clean.

  • Release Rejected

    Hi,
    My client facing issue regarding creation of production order gettin error Release Rejected  C2039.
    Actually problem with only single material and rest of the material working fine.
    There is no issue with OPJK Define checking control.
    So please help me for this...
    Atul

    Hiii,
    Please check whether the checking group has been Assigned to Material in the Material master MRP3 view if the same has been defined in Configuration......and check checking rule is maintained for plant in plant parameters...
    Thanks & Regards,
    Bharathish

  • Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

    Am trying to download itunes as it has previously deleted during an update, and it comes up during the installation that there is a file error with my resources

    That's perfect, thanks.
    error writing to file: C:\Program
    files\ i tunes\ i tunes.Resources\ja.lproj\AppleTVStream
    itxib. Verify that you have access to that directory
    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Maybe you are looking for