Deletion Icon in Goods Movement screen of CO13

Hi experts
In the goods movement screen of CO13, the deletion icon provided is de-activated by default. Is it possible to activate it? If possible - how?
I want to remove the materials from the CO13 transaction, and cancel the confirmation qty only
Your inputs will be highly appreciated.
Regards
Krishnaraj

Thanks for your reply.
But my requirement is that I must not reverse the goods movements at all. Thats the reason why I wanted to delete the materials that appear in the Goods movement page.
In some thread, I read that some expert had asked to delete the materials from the goods movements list.
I would like to know how to delete the materials. My deletion icon is inactive.
Pls find below thread :
Regards
Krishnaraj
Re: CO13 cancel confirmation - error
Prasobh Karunak...  
Posts: 4,852
Registered: 9/1/06
Forum Points: 11,500 
   Re: CO13 cancel confirmation - error   
Posted: Aug 21, 2007 10:53 AM    in response to: Sankaran M           Reply 
Muthusamy,
*If you want to cancel only the confirmation, then after selecting the last operation for cancelling in CO13, hit the "Goods Movement" button, here you delete the line items which is basically to reverse GR & GI along with Confirmation.*
If you need to reverse the goods movement also, then follow the same step in the goods movement overiew scroll to the right side of the screen to find the field "Reason for cancellation", take a drop down and select the reason and save.
Regards,
Prasobh

Similar Messages

  • Reason in Goods Movement Screen

    Hi all,
               I want to Enter some fixec reasons in the goods Movements Screen(mb1a).
    The Reasons One reason for Over Issue , another one Good Material Return to W/H, and last one from Return of Defect Material
    Is it Possible to alter SAP Standard screen, If Possible  which Screen E#xit/User Exit can i use , Please reply me

    Hi,
    yes you can alter SAP Standard screen, this can be achieved via development but taking so much pain to do this is better user select what the reason is.
    this is given in standard SAP since there may be more than one reason, your requirement is unique.
    Regrds
    Rang

  • During conf-plant field in goods movement screen - to be didplay

    During Confirmation of a process order, in the goods movement screen, user can change the plant for a component...As a default it is copying the order header plant.
    Since it is a changeable field i.e. value can be changed , user is changing the filed value and system is issuing the material from that plant.
    Since the user has authorization in many both plant, hence I cannot restrict by authorization.
    I tried in CO86 to change field status, but I am not in the position to get the plant filed in goods movement screen.
    I am changing the screen with transaction variant, but I need to change all the training documents which  is very big job and train many people.
    Is there any other way out?

    Hi Rajesha
    Not fully sure but i think you can use the BADi ( WORKORDER_CONFIRM) to acheive this.
    BADI Details-
    Definition - WORKORDER_CONFIRM
    Interface - IF_EX_WORKORDER_CONFIRM
    Methods = AT_SAVE, BEFORE_UPDATE, IN_UPDATE, AT_CANCEL_CHECK
    Within this  a system message may be issued only in in these conditions, while saving the confirmation ERROR_WITH_MESSAGE (for AT_SAVE method) or NOT_ALLOWED (for AT_CANCEL_CHECK method) at the same time
    Just try this with your ABAP consultant  ...
    IT'll not make the plant field in display mode..but send an error if doesn't match with the plant in order header
    Best Regards
    Sumit Sharma
    Message was edited by:
            Sumit Sharma

  • At co11n in goods movement screen material not showing

    hi all,
           when i m doing co11n n going to goods movement screen it not showing  material and its quantity though after the confirmation material deducted from its stock, plz help me in this matter

    Hi dear,
    In Production order in operation overview check if control key is correctly maintained or not.
    Also in Production order component over view if the back flush is unticked then that material will not be seen in CO11N goods movement.

  • Storage Location is not found in Goods Movement Screen in Prod.Order CNF.

    Hi Experts,
    I have create a production order with Auto GI &GR.When i going to confirm it,in Good Movement Screen  storage location entry field is not found thats why i can't enter Sto.Location.
    Can any Expert tell me the solution for this issue?
    With regards.
    Prashant

    Dear,
    In the material master, MRP2 view maintain Storage loc for material.
    Please refer this thread as a reference,
    Storage location not found in MIGO for 101 movement type
    Regards,
    R.Brahmankar

  • Need to disable delete icon in over view screen (table maintainance)

    In the overview screen (transaction se 54 -> generated object -> overview screen) in table maintainance i need to disable the delete icon.
    Anyone can please help me in it.

    Hi,
    check the program name for the transaction and create a screen exit for the same.
    Also u can go for copying the code in customer namespace and then add ur own functionality to dactivate or remove the delete function.
    Pls reward points for the answer.
    Regards,
    Ameet

  • Restrict user to delete item in good movement at the time of confirmation

    Hi ,
    I have one requirement i.e. When user confirming the partial confirmation and if he selected the goods movement button i have to restrict the user not to change the material quantities in the goodsmovement screen.How i can do it .Is there any user-exits to do so, if any plz give me more info .
    Regards,
    Anand

    Hi
    Try any of the below enhancements
    CONFPP01
    With this customer enhancement you can determine your own default values
    (ones that deviate from SAP logic) for a confirmation. The confirmation
    can be changed in the customer enhancement.
    The following are copied to the interface: the operation in the order
    (AFVGD), the order header (CAUFVD) and the confirmation (AFRUD) as well
    as the confirmation parameters (TCORU). The confirmation is copied back
    from the customer enhancement to the SAP standard program.
    CONFPP02
    With this customer enhancement you can make your own checks of the
    confirmation after the SAP checks have taken place. The confirmation
    cannot be changed.
    The following are copied to the interface: the operation in the order
    (AFVGD), the complete order header (CAUFVD) and the confirmation
    (AFRUD).
    CONFPP03
      With this customer enhancement you can make your own checks once an
      operation has been selected for confirmation. The data cannot be
      changed.
      The following are copied to the interface: the operation in the order
      (AFVGD) and the complete order header (CAUFVD).
    CONFPP04
    With this customer enhancement you can carry out your own checks on the
    confirmation. The confirmation can for example be changed depending on
    the user's entries.
    The following are copied to the interface: the operation in the order
    (AFVGD), the complete order header (CAUFVD) and the confirmation
    (AFRUD). The confirmation is copied back from the customer enhancement
    to the SAP standard program.
    CONFPP05
    With this customer enhancement you can update your own data once you
    have saved the confirmation. You cannot change the confirmations.
    In this customer enhancement it is strictly FORBIDDEN to send error
    messages or other messages because otherwise there is the danger that
    data will be inconsistent. SAP takes no responsibility for this !!!
    The following are copied to the interface: a table with all the
    confirmations (AFRUD) created in this transaction and a table with the
    order headers (CAUFVD) that belong to it.
    CONFPP06
    With this enhancement you can determine which data from a manually
    entered confirmation is transferred to the automatically created
    confirmations, for example, when a confirmation is entered for a
    milestone operation.
    In addition to the order data (IS_CAUFVD) and operation data (IS_AFVGD),
    the confirmation type (I_CONF_TYPE) is also transferred. The data from
    the manually entered confirmation is imported via the structure
    IS_AFRUD_MAIN and the data determined by the system for the
    automatically created confirmation is imported via the structure
    IS_ACT_DATA.
    The data from the automatically created confirmation can then be
    modified and exported via the structure ES_ACT_DATA.
    CONFPP07
    With this enhancement you can define your own detail areas (screens)
    that can be issued for the single screen entry of time ticket
    confirmations.
    Two function modules are available to implement the flow control for the
    customer-defined screens. While the function module EXIT_SAPLCORU_S_100
    transmits the data from the confirmation, order, operation and work
    center, the entered confirmation data can be exported using the function
    module EXIT_SAPLCORU_S_101 and the structure ES_AFRUD.

  • CO15 - SAPLCOWB : Adding field to Goods Movement Screen

    Hello,
    Have a requirement to add matl master field "Old Material Number" (MARA-BISMT) as a column within the CO15 Matl movements overview screen.  Is there an available user exit, customizing, enhancement that could be used for this requirement?  Any suggestions?
    Thanks,
    Barry

    Hi!,
    Please note the list of stsndard user exit available for CO15 / CO11N:
    CONFPP01 PP order conf.: Determine customer specific     default values
    CONFPP02 PP order conf.: Customer specific input checks 1
    CONFPP03 PP order conf.: Cust. specific check after op. selection
    CONFPP04 PP order conf.: Customer specific input checks 2
    CONFPP05 PP order conf.: Customer specific enhancements when saving
    CONFPP06 PP Order Confirmations: Actual Data Transfer
    CONFPP07 Single Screen Entry: Inclusion of User-Defined
    Subscreens
    Regards,
    Uday

  • Manufacturer Serial No. on Goods Movement Screen

    Hi,
    In a scenario, user wants that while doing goods issue for a material, apart from entering the SAP serial no., he / she should be able to enter the Manufacturer's serial no and which will update the manufacturer serial no. field under serial no. master.
    Please let me know, how this can be done?
    Regards...

    Hi
    Check and make active the filed MPN Material - GOITEM-EMATN in OMJX t code.
    Vijay

  • Restriction to delete goods movement data during confirmation thru CO11N

    hello all
    Please let me know how to prevent the user to delete the rows in goods movement screen during confirmation through transaction CO11N ,as users are able to confirm without goods issue by deleting that rows.
    Should we contact basis person for the same
    with regards

    Dear,
    Please refer my reply in this thread,
    https://forums.sdn.sap.com/click.jspa?searchID=16368869&messageID=6047820
    https://forums.sdn.sap.com/click.jspa?searchID=16368869&messageID=6151829
    Try using transaction variants. There is a utility called GUIXT in transaction. You can write code to add a pushbutton on the desired screen by using the GUIXT. The coding syntax is provided in the SAP application help. Use transaction SHD0 to create the variants.
    http://wiki.ittoolbox.com/index.php/Implement_a_screen_exit_to_a_standard_SAP_transaction
    Hope it will help come back if any problem.
    Regards,
    R.Brahmankar

  • Batch Classification Screen for Goods Movements

    SAP Gurus,
    Very recently (24. April), we experience the following issue: (PP-PI Process Order)
    At the moment of process order confirmation, for any new batch assigned in the good movement overview, there's no pop-up of batch classification screen which allow our user to entry the classification data. And this functionality works fine in the past.
    Do you have an idea that how it happens? We checked the configuration OMCV and master data as well, the settings are all fine to me.
    Best regards,
    Vincent

    Dear Vincent,
    I think you talk about the 101 movement, don't you? In this case this is not possible at all, check SAP note  85310
    Because goods movements can be decoupled from confirmations and          
    processed in background, it was decided that this functionality would    
    not be implemented; therefore this is Standard R/3.                      
    Solution                                                                 
    As a work around for this you have the following options:                                                                               
    1.  Classify your batch manually through Batch Master Maintenance.                                                                               
    2.  Turn off automatic goods receipt and classify your batch through the 
        pop-up that is presented during MM goods receipt.                                                                               
    3.  Do not create your batch during Order Processing. Instead have the   
        system create it during confirmation and at this time you will be    
        able to classify your new batch from the Goods Movement screen       
        COMPONENT>BATCH MANAGEMENT>CREATE BATCH.                                                                               
    Note :                                                                   
    If you want that your batch is classified in the background you can set  
    in the transaction OMCV (classify batches within goods movement          
    overview) that the classification is to happen in the background. You    
    can then utilise the user exit EXIT_SAPMM07M_004 to valuate the          
    characteristics if it is valid for                                       
    your release.                                                            
    Regards,
    Sabine

  • Compnts in goods mvt. screen in proc. order confirmation in display only

    Hi Gurus,
    My requirement is , while confirming the process order, in the Goods movements screen, we should not allow the user to change or delete the components. It should be in display mode only.
    pls help me in achieving this.
    Thanks in advance.
    - Gowri

    Gowri,
    You can create a transaction variant using SHD0 transaction for CO11N and in the defination define these fields output only and deactivate the delete button.
    The other option is to control through authorisation object.
    There are several post on this..so kindly request you to search this forum for details,
    Regards,
    Prasobh

  • Marking "goods movement completed" automatically during iw41 in PM

    Hi all,
    I have a problem during iw41.
    I asign material/components in component tab in order, and use t-code IW41 for confirmation, in this I confirm operation then click on goods movement icon, "completed" field is getting ticked automatically in this goods movement screen.
    So when I change the amount of component to a lower quantity than planned quantity and come back and save, it is recorded as completed goods movement. But I don't want this goods movement with missing amount to be ticked as completed goods movement because it is recorded in tables as completed also.
    Please kindly let me know how can I avoid this ticked automatically.
    Thanks and Regards
    Damlasu

    As the component has been mentioned as Backflush in component tab of the order, Completed check box is selected in Goods movement screen.
    Implicit meaning is that as it has been mentioned as Backflush, no more qty is required. I guess, there is no config to change this. Only using user exit or manually, we need to remove the tick.

  • Goods Movement Qty While Confirming the Order

    Hi Friends,
    While confirming the order The end user Will go to the goods movement screen and enter the actual consumed Qty (When all BOM components Are marked with automatic Back flush) For the components with 261 movement type and will enter the storage location and batch no if required .
    Now my requirement is the user should not have the access (it should be in gray) to the BOM Components qty to change
    OR
    He should not be able to change beyond the qty As per scrape % Given in Material Master or BOM.
    The Reason for this is
    Even When there is a shortage for BOM components in SL location, he is reducing/Adjusting  the required quantities as per the existing Qty ( If there is no stock then making it to ZERO also)  and confirming the order.
    Pl suggest me is there any user Exit for this or can I do it thru Standard SPRO settings.
    hari

    Hi,
    You  can make screen variant SHD0 for CO11N and hide it.
    In t code SHD0, give the transaction variant name ( say ZCO11N )of ur std CO11n.
    CO11N screen will appear, when u will save the variant, u will getgood movement tab , it will hide now.
    Activate the transaction variant.
    Regards,
    R.Brahmankar

  • Co-Product Good Movements

    Hi -
    I need help with production orders & co-product.
    I have set up a production order with a co- product.  For this material there is no fixed quantity, the quantity may vary per WO. So I would like the user to enter the quantity that is received during WO confirmation in CO11 on the goods movements. 
    Instead of setting up an specific quatity in the BOM.
    Right now, I'm using a control key which allow auto goods receipt and milestone confirmation. But I'm not able to see any movement for 103 (good receipt) on the good movements screen of C011.
    Thanks for you very much for your help and any material you guys understand will be helpful !!

    Dear Villanueva,
    As said by our forum friend Jade,you cannot make a Auto GR for a co-product.
    You have to do the same manually using MIGO or MB31 for 101 movement by mentioning the order.You can mention the actual
    quantity of co-product and then do the GR.
    Also check these links,
    movement type for co product
    Re: Order Qty Exceed error message
    Regards
    Mangalraj.S

Maybe you are looking for