Deletion of obsolute connector in RAR

Hi,
We have removed one system from our landscape. This system was connected with RAR.
We are on AC 5.3 SP 9. Since we are not yet on SP 10 or above, we do not have option to delete one system in RAR under Configuration --> Utility --> Manage Deletion --> Delete system.
Is there any other way available in SP9 to delete a connector. Because if I tried to delte the connector, getting message "Cannot delete connector as there are entries related to this connector in the system".
We do have rules generated for this system which need to delete.
Please suggest.

Hi Deepak,
SP 9 does not have the facility of deleting the connector of redundant systems
SP 10 is providing this facility of deleting the connector. You can refer to SAP Note 1416728- Manage Deletion Functionality in RAR
5.3 Support Pack 10
The SAP note details how this feature is used to delete obsolete systems, and their related data, from the RAR capability.
Thanks and Best Regards,
Srihari.K

Similar Messages

  • Delete an SCSM Connector

    I created a connector to SCOM in SCSM, it was manually removed from SCOM.  Now I cannot delete the SCSM connectors that were connected with SCOM.

    Deleting the connector in SCOM can be done (unsupported):
    http://blogs.technet.com/b/kevinholman/archive/2009/09/10/removing-an-old-product-connector.aspx
    Due to the similarities between the products, the SQL queries that Kevin shows for removing the connector from OpsMgr also work on SCSM .. but it would be a big risk to try it out in a Production environment. The prudent action might be just to rename the
    connector in SCSM to "Decommsissioned OpsMgr connector" or similar.
    Good Luck
    Graham
    View OpsMgr tips and tricks at
    http://systemcentersolutions.wordpress.com/

  • Attributes not deleted int the Connector View

    when an attribute is deleted in the data source, the corresponding attibute is not deleted in the connector view.
    For example :
    when a mailforwardingaddress attribute is deleted in the datasource entry, it remains visible in the connector view.
    Config :
    The UTC uses an attribute flow including mailforwardingaddress,
    updates are made only from datasource to CV.
    no default values, no filter.
    Thanks for any help.
    Best regards,
    Vincent MAZARD
    [email protected]

    MEtadir is not attributes owned but entries owned: to do so, you must create a new AF where the criteria is %operation% = DeleteFromCVtoMV and in flow, you choose attributes you want to see deleted
    hope it helps

  • HOW COULD I DELETE A DBUM CONNECTOR?

    Hi,
    I have cloned my dbum connector and i need clean the oim deleting some dbum connector cloned that i don't use anymore
    any body know how to do this??
    thanks!

    There is an uninstall process documented here: http://docs.oracle.com/cd/E21764_01/doc.1111/e14308/conn_mgmt.htm#BABFBAAI
    -Kevin

  • How to delete System / System Connector  in VIRSA CC ??

    We have implemented VIRSA with 1 System Landscape. i.e for VIRSA we have only one system.
    Our VIRSA version is 5.1.
    Currently our VIRSA is configured  with 2 DEV + 2 QTY + 2 PRD ABAP systems.
    i.e VIRSA is having now 6 ABAP Systems for analysis.
    As we aware in 5.1 Batch Risk Analysis can not be run for 1 system.
    we have to run Batch Risks Analysis for all systems - it is taking everytime 72 Hours to compete the same.
    During 72 Hours any system has any problem / connection / restart / any thing happens. The batch risk analysis goes into "ERROR".
    In this corner - we want to remove DEV & QA Systems from VIRSA.
    How we can do that??
    When we are trying to delte the Connectors of respective Systems.
    we are getting the following message
    " com.virsa.cc.rulearchitect.dao.DAOException: Cannot delete connector as there are entries related to this connector in the system. "
    How can we delete the Connectors in a standard way. if it can not be delted in stnadard way , what is the work around ??
    Rgds
    Edited by: B Jyothi on May 11, 2009 5:50 AM

    Hi.. Experts
    If we would like to delete the connectors,
    we can do it manually from database.
    You can use attached deletion script which needs to be run at database level.
    and restart the instance which very much mandatory
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    Note : SAP never recommends to use deletion script on Production Server.
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
    IMPORTANT Note 1 - 
    +++++++++++++++++++
    This script will delete EVERYTHING related to a connector
    including rules, mitigations, management reports, etc.
    Therefore, Customer are doing this on their own accord.
    In order to delete the (CC) data, you would have to run a
    deletion script against the database tables.
    However, this is not the recommended best practice especially
    in a production environment.
    In doing so this may cause data inconsistencies and may render your
    application unstable. Therefore, please be advised that by using the
    script you are doing this at your own accord and SAP Support will not
    be responsible for any loss of data consequent to the application of the
    script and SAP cannot support an unstable application.
    The script will be provided only upon request. Again, please be aware that
    execution of this script is recommended only in a non productive environment.
    It is also recommended that you take a backup of the database prior to
    executing the script.
    IMPORTANT Note 2 -
    +++++++++++++++++++
    Please involve your DBA to run the attached scripts on the Java Database
    where you have the CC 5.x Installed. Since you want to delete the data
    for a particular connector,
    kindly replace the '&1' in the script
    for VSYSKEY with the SID of the Connector.
    Note:
    +++++++++++++++++++
    The Management reports will also be removed after you run the script
    andyou will have to re-run the Management Update Jobs for the exisiting
    connectors, to make sure that you have the accurate results in the
    graphs.
    PLEASE USE THIS SCRIPT ONLY ON YOUR OWN RISK. STILL WE HAVE A COMPLETE BACKUP
    WE HAVE NO RISK; TAKE BACKUP & TAKE A CHANCE RUNNING THIS SCRIPT.

  • Problem deleting search object connector template in template modeler

    Hi Experts
    By mistake I have created same search object connector in two different software components. Now in adminstration cockpit, template modeler when I try to create a connector, error message is displayed about the conflict in of same object names. Now I want to delete the business template under ESH_COMMON_OBJECTS, which I am not able to do. Please help me out
    Thanks in advance!!
    Goutham

    I resolved it. if delete is disabled,we can delete or rename the template after selecting the option 'resolve conflicts' in 'actions' dropdown. But even this didn't work with ESH_COMMON_OBJECTS templates, so I have created new template with different name.

  • How to delete a DBUM connector cloned - OIM 11g R1 ?

    Hi,
    I have a DBUM connector cloned, sometimes the cloning process wasn't successfully and now i have to delete the wrong cloned connectors .
    Looking for information i found how to delete a connector, but this is for the big connector and i need when is a cloned connector.
    any idea?
    thank you.!

    25 Jan 2013 15:41:42 DEBUG Logger Initialized
    25 Jan 2013 15:41:42 DEBUG Exiting Method: validateAndInitiazeLogger of Class: ConnectorUninstall
    25 Jan 2013 15:41:42 DEBUG Exiting Method: loadPropertyFileAndLogger of Class: ConnectorUninstall
    25 Jan 2013 15:41:42 DEBUG Start of ConnectorUninstall Utility.
    25 Jan 2013 15:41:42 DEBUG Entering Method: getDBPassword of Class: ConnectorUninstall
    25 Jan 2013 15:41:48 DEBUG Exiting Method: getDBPassword of Class: ConnectorUninstall
    25 Jan 2013 15:41:48 DEBUG Entering Method: getOIMAdminUserName of Class: ConnectorUninstall
    25 Jan 2013 15:41:51 DEBUG Exiting Method: getOIMAdminUserName of Class: ConnectorUninstall
    25 Jan 2013 15:41:51 DEBUG Entering Method: getOIMAdminPassword of Class: ConnectorUninstall
    25 Jan 2013 15:41:55 DEBUG Exiting Method: getOIMAdminPassword of Class: ConnectorUninstall
    25 Jan 2013 15:41:55 DEBUG Entering Method: getOIMServerT3URL of Class: ConnectorUninstall
    25 Jan 2013 15:42:02 DEBUG Exiting Method: getOIMServerT3URL of Class: ConnectorUninstall
    25 Jan 2013 15:42:02 DEBUG Entering Constructor of Class: UninstallUtility.
    25 Jan 2013 15:42:02 DEBUG Validating Properties File..
    25 Jan 2013 15:42:02 DEBUG Entering Method: validateAndPopulateDBAndConnectorParameters of Class: UninstallUtility
    25 Jan 2013 15:42:02 DEBUG Exiting Method: validateAndPopulateDBAndConnectorParameters of Class: UninstallUtility
    25 Jan 2013 15:42:02 DEBUG Valdiation Succeeded.. All the properties have been loaded.
    25 Jan 2013 15:42:02 DEBUG Getting the Database Connection
    25 Jan 2013 15:42:02 DEBUG Entering Method: getDatabaseConnection of Class: UninstallUtility
    25 Jan 2013 15:42:02 DEBUG jdbc:oracle:thin:@192.168.12.57:1521:ban26
    25 Jan 2013 15:42:16 DEBUG Connection established
    25 Jan 2013 15:42:16 DEBUG Exiting Method: getDatabaseConnection of Class: UninstallUtility
    25 Jan 2013 15:42:16 DEBUG Setting the OIMClient
    25 Jan 2013 15:42:16 DEBUG Entering Method: setOIMClient of Class: UninstallUtility
    25 Jan 2013 15:42:25 DEBUG Exiting Method: setOIMClient of Class: UninstallUtility
    25 Jan 2013 15:42:25 DEBUG Successful in setting the OIMClient
    25 Jan 2013 15:42:25 DEBUG Exiting Constructor of Class: UninstallUtility.
    25 Jan 2013 15:42:25 DEBUG Entering Method: doObjectDeletion of Class: ConnectorUninstall
    25 Jan 2013 15:42:32 DEBUG Entering Method: validateObjectDeletion of Class: UninstallUtility
    25 Jan 2013 15:42:32 DEBUG Exiting Method: validateObjectDeletion of Class: UninstallUtility
    25 Jan 2013 15:42:32 DEBUG Entering Method: getTokens of Class: ConnectorUninstall
    25 Jan 2013 15:42:32 DEBUG Exiting Method: getTokens of Class: ConnectorUninstall
    25 Jan 2013 15:42:32 DEBUG Entering the getROList method of UninstallUtility
    25 Jan 2013 15:42:33 DEBUG List of Resource object fetched from database: [Oracle DB User, Oracle DB Trusted, AD Group, AD Organizational Unit, AD User, AD User Trusted, UNIX User Trusted, UNIX User, TB_BAN23_SIC_GTC, iPlanet Organisation Unit, iPlanet User, iPlanet Group, iPlanet Role, RSA Auth Manager Token, RSA Auth Manager User, Xellerate User, Xellerate Organization, Installation, Oracle DB User 1, Oracle DB Trusted 1, TB_BAN24_SUB_GTC, TB_BAN24_AUR_GTC, TB_BANE_AURO_GTC, TB_BAN24_CUD2_GTC, TB_PRUBAN24_GTC, OracleBAN26, Oracle DB Trusted ban26, OracleBAN23, Oracle DB23 Trusted, OracleSICBan23, OracleBAN25jano, Oracle DB Trusted mfnsys DCV, Oracle DB Trusted Usu Esp Bane, TB_BAN23_JAN_GTC, TB_BAN23_MAS_GTC, TB_BAN23_SEC_EXT_GTC, TB_BAN23_SECE_GTC, TB_BAN24_CUD_GTC, TB_BANE_AUR2_GTC, TB_SIPEC_GTC, TBBAN24_CUD_ESP_GTC, TBBAN25_AUR_ESP_GTC, TBBAN23_AUR_ESP_GTC, TBBANE_SISEC_ESP_GTC, TB_MFNSYS_DCV_4_GTC, TB_MFNSYS_DCV_5_GTC, OracleBANE, OracleBAN23Sic, Oracle DB Trusted Ban23 SIC, OracleBAN24cud, Oracle DB Trusted ban25 JANO, OracleBANEsisec, Oracle DB Trusted bane SISEC, Usu Esp OracleBAN25, Oracle DB Trusted Usu Esp Ban25, Oracle DB Trusted Usu Esp Ban26, SPRU1A Trusted, SPRU1A User, TB_BAN23_AURA_GTC, TB_BAN25_AUR_GTC, TB_BAN25_SIM_GTC, TB_BANE_AUR_GTC, TB_BANE_SIS_GTC, TB_BAN26_MAS_GTC, TB_BANE_SISEC_GTC, TB_BANE_SIS_2_GTC, TB_MFNSYS_DCV_2_GTC, TB_MFNSYS_DCV_3_GTC, TBBAN24_AUR_ESP_GTC, TBBANE_AUR_ESP_GTC, TBBAN25_JANO_ESP_GTC, TBBAN26_MAS_ESP_GTC, TBBAN23_SIC_ESP_GTC, TBBAN24_CUD_ESP_2_GTC, Oracle_Ban27, Oracle_Ban27_Trusted, OracleBAN24, Oracle DB24 Trusted, OracleBAN25, Oracle DB25 Trusted, OracleBAN27, Oracle DB27 Trusted, Oracle DBBANE Trusted, Oracle DBMFNSYS Trusted, Oracle DB Trusted SIC Ban23, OracleBAN23praxis, Oracle DB Trusted Ban23 PRAXIS, Oracle DB Trusted ban24 CUD, OracleBAN26master, Oracle DB Trusted ban26 MASTER, OracleMFNSYSdcv, Usu Esp OracleBAN23, Usu Esp OracleBAN24, Oracle DB Trusted Usu Esp Ban24, Usu Esp OracleBAN26, Usu Esp OracleBANE, TB_BAN23_AUR_GTC, TB_BAN25_SMV_GTC, TB_BAN25_JAN_GTC, TB_BAN26_AUR_GTC, TB_BANE_UPLO_GTC, TB_BANE_UPDU_GTC, TB_BAN26_MAS_2_GTC, TB_PRUEBA_C_GTC_GTC, TB_MFNSYS_DCV_GTC, TB_BAN25_SMV_2_GTC, TB_BAN27_IDMUSER_GTC, TB_ACH_CENIT_GTC, TBBAN26_AUR_ESP_GTC, TBBAN24_CUD_ESP_3_GTC, TB_MFNSYS_DCV_6_GTC, Oracle DB User ban24, Oracle DB Trusted ban24, Usuario BD ban23, Oracle DB Trusted ban23, OracleMFNSYS, Oracle UsuEspDB23 Trusted, SUCED USUARIOS_GTC, SUCED USUAUTORIZADOS_GTC]
    25 Jan 2013 15:42:33 DEBUG Exiting the getROList method of UninstallUtility
    25 Jan 2013 15:42:33 DEBUG Entering Method: doResourceObjectDeletion of Class: ConnectorUninstall
    25 Jan 2013 15:42:33 DEBUG Entering Method: checkAccessPolicies of Class: UninstallUtility
    25 Jan 2013 15:42:33 DEBUG Checking the access policy related to the resource object(s): [OracleBAN25jano]
    25 Jan 2013 15:42:33 DEBUG Exiting Method: checkAccessPolicies of Class: UninstallUtility
    25 Jan 2013 15:42:33 DEBUG There are no Access Policies Associated with the Resource
    25 Jan 2013 15:42:33 DEBUG Closing all the Requests Associated with the Resource
    25 Jan 2013 15:42:33 DEBUG Entering Method: closeRequest of Class: UninstallUtility
    25 Jan 2013 15:42:33 DEBUG Getting the RequestService Handler
    25 Jan 2013 15:42:33 DEBUG Entering Method: getRequestService of Class: UninstallUtility
    25 Jan 2013 15:42:33 DEBUG Exiting Method: getRequestService of Class: UninstallUtility
    25 Jan 2013 15:42:33 DEBUG Successful in getting the RequestService Handler
    25 Jan 2013 15:42:33 DEBUG Prepared Statement that would be executed : select distinct(request_beneficiary_entities.rbe_request_key) from request_beneficiary_entities request_beneficiary_entities, obj obj, request request, request_beneficiary request_beneficiary where request_beneficiary_entities.rbe_entity_type='Resource' and request_beneficiary_entities.RBE_ENTITY_KEY = obj.obj_key and obj.obj_name=? and request.REQUEST_KEY = request_beneficiary.REQUEST_KEY and request_beneficiary.REQUEST_KEY = request_beneficiary_entities.rbe_request_key and request_beneficiary.BENEFICIARY_KEY = request_beneficiary_entities.RBE_BENEFICIARY_KEY and request.REQUEST_STATUS not in ('Operation Initiated', 'Template Approval Rejected', 'Request Approval Rejected', 'Operation Approval Rejected', 'Request Closed', 'Request Withdrawn', 'Request Completed', 'Request Failed', 'Request Partially Failed', 'Operation Completed', 'Post Operation Processing Initiated', 'Request Completed with Errors')
    25 Jan 2013 15:42:33 DEBUG Executing the Prepared Statement for the ResourceObject: OracleBAN25jano
    25 Jan 2013 15:42:35 DEBUG Successfully executed the Prepared Statement for the ResourceObject: OracleBAN25jano
    25 Jan 2013 15:42:35 DEBUG Exiting Method: closeRequest of Class: UninstallUtility
    25 Jan 2013 15:42:35 DEBUG Entering Method: checkAndPrintRequestTemplate of Class: UninstallUtility
    25 Jan 2013 15:42:35 DEBUG Prepared Statement that would be executed : select distinct(request.REQUEST_TEMPLATE_NAME) from request_beneficiary_entities request_beneficiary_entities, obj obj, request request, request_beneficiary request_beneficiary where request_beneficiary_entities.rbe_entity_type='Resource' and request_beneficiary_entities.RBE_ENTITY_KEY = obj.obj_key and obj.obj_name=? and request.REQUEST_KEY = request_beneficiary.REQUEST_KEY and request_beneficiary.BENEFICIARY_KEY = request_beneficiary_entities.RBE_BENEFICIARY_KEY
    25 Jan 2013 15:42:35 DEBUG Executing the Prepared Statement for the ResourceObject: OracleBAN25jano
    25 Jan 2013 15:42:35 DEBUG Successfully executed the Prepared Statement for the ResourceObject: OracleBAN25jano
    25 Jan 2013 15:42:35 DEBUG Exiting Method: checkAndPrintRequestTemplate of Class: UninstallUtility
    25 Jan 2013 15:42:35 DEBUG Proceeding for the Deletion...
    25 Jan 2013 15:42:35 DEBUG =====================================================================
    25 Jan 2013 15:42:35 DEBUG Invoking Object Deletion:
    25 Jan 2013 15:42:35 DEBUG =====================================================================
    25 Jan 2013 15:42:35 DEBUG Entering the deleteResource method of UninstallUtility
    25 Jan 2013 15:42:35 DEBUG Entering the removeDeletedResourceObject method of UninstallUtility
    25 Jan 2013 15:42:35 DEBUG Exiting the removeDeletedResourceObject method of UninstallUtility
    25 Jan 2013 15:42:35 DEBUG List of resource object selected for deletion: [OracleBAN25jano]
    25 Jan 2013 15:42:35 DEBUG Entering Method: checkAndPrintAttestationTask of Class: UninstallUtility
    25 Jan 2013 15:42:35 DEBUG Prepared Statement that would be executed : SELECT DISTINCT apd.apd_name FROM apd,atr,apt,atd,oiu,obi,obj WHERE apd.apd_key = atr.apd_key AND atr.atr_key = apt.atr_key AND apt.apt_key = atd.apt_key AND atd.oiu_key = oiu.oiu_key AND oiu.obi_key = obi.obi_key AND obi.obj_key = obj.obj_key AND obj.obj_name = ?
    25 Jan 2013 15:42:35 DEBUG Executing the Prepared Statement for the ResourceObject: OracleBAN25jano
    25 Jan 2013 15:42:35 DEBUG Successfully executed the Prepared Statement for the ResourceObject: OracleBAN25jano
    25 Jan 2013 15:42:35 DEBUG Exiting Method: checkAndPrintAttestationTask of Class: UninstallUtility
    25 Jan 2013 15:42:35 DEBUG Entering Method: deleteReconciliationData of Class: UninstallUtility
    25 Jan 2013 15:42:35 DEBUG Getting ReconConfigService instance.
    25 Jan 2013 15:42:35 DEBUG Successful in getting ReconConfigService instance.
    25 Jan 2013 15:42:35 DEBUG Deleting the reconciliation profile for the resource object: OracleBAN25jano
    25 Jan 2013 15:43:09 DEBUG Deleted the reconciliation profile for the resource object: OracleBAN25jano
    25 Jan 2013 15:43:09 DEBUG Exiting Method: deleteReconciliationData of Class: UninstallUtility
    25 Jan 2013 15:43:09 DEBUG Stored Procedure Call= {call XL_PKG_RemoveObject.XL_SP_RemoveRO(?,?)}
    25 Jan 2013 15:43:11 DEBUG Exiting the deleteResource method of UninstallUtility
    25 Jan 2013 15:43:11 DEBUG Messsage Returned by the SP: null

  • How to delete the clonned connector

    Hi all,
    I have imported AD 11.1.1.5 connector.
    completed clonning for 2 AD's.
    Now I want to delete the one cloned connector.
    every where I am seeing the uninstalling the original connector, but I dont want to uninstall the original connector.
    could anyone please let me know how to remove the cloned connector with all scheduletasks, lookups, RO, PO's.
    Thanks in Advance,
    Valli

    Hello dennis130915 and welcome to the BlackBerry Support Community Forums.
    The image you have uploaded is unable to be displayed.
    Call Forwarding is a carrier controlled feature. Most likely, the number you see could be for the Voice Mail server.
    It's advised you call your mobile service provider to further assist with this feature.
    Thanks!
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • Creating an Adaptive RFC Connector in RAR

    Hi ,
    We are trying to add a new ECC 6.0 system to our RAR monitored systems. We use GRC RAR SP8 Patch1
    In the connector  config, the config guide says:
    "SAP GRC Access Control 5.3 gives you the option of setting up SAP JCO connections instead of Adaptive RFC connections. We
    recommend that you use Adaptive RFC for your first 21 connectors because they are more efficient than SAP JCO connectors"
    So we want to create the new connector based on Adaptive RFC type. We have maintained the back end system in the SLD and created the JCO destinations for Metadata and Model on the GRC system. But the newly created system is not getting listed when trying to create a new connector (RAR -> Configuration -> Connectors -Create) for the back end .
    Does it need any further config/set-up for the system to be availalble in the list?
    Thanks & Regards,
    Anil

    Registred the server in service file and restarted server?
    RFC service user OK? No block, suffitient authorization ?
    Cheers,
    Vit
    Edited by: Vit Vesely on Nov 9, 2009 8:08 PM

  • User not deleting using iPlanet Connector

    Hello,
    I am using iPlanet connector & created a task where users with Employee-Type as Part-Time are provisoned
    to iPlanet Resource & user is created in target system,but when i remove that user from Part-Time & set some
    other Employee-Type then iPlanet resource is revoked but user is not deleted from target system & it gives
    response as user does not exist,but users exist in target system.Could anyone suggest what is missing ?
    Thank-You
    Rahul Shah

    Thanks Kevin
    After your reply i checked my Task status & there was 1 task created by me was having status
    as Pending,so i tried to delete that task,but was not able to delete that task as OIM does not allow to
    delete any task once a task runs , so i renamed it & made conditional & then checked & was working i.e
    users were getting deleted from target system.

  • Getting Error while deleting connector in CC.

    Hi All,
    I am trying to delete a connector in Compliance Calibrator 5.2.
    I am getting a error message "Error:Exception!!. No relavent language message available in database for :0140".
    Please suggest.
    Thanks in Advance.
    Regards,
    Pravin

    Hello Pravin,
    To delete any connector in CC 5.x, you need to delete all data related to that.
    For that you need script, which is provided by SAP GRC support team.
    Create message under GRC component and they will provide you script for the same.
    After running that script you can delete the concerned connector.
    Remember this script will delete all your Management data.
    Regards,
    Surpreet Singh Bal

  • RAR Enterprise Portal Connector issue

    Hello All,
    I'm trying to connect my RAR system to Enterprise Portal and getting "Connection Failed" message. Could anyone help me out or walkthrough the steps for creating EP connector in RAR system.
    Below is the error log:
    Apr 21, 2011 1:22:44 PM com.virsa.cc.dataextractor.bo.ConnectorUtil testConnection
    SEVERE: Cannot get data extractor for.  Reason:DEVPORTAL/DEVPORTAL
    com.virsa.cc.dataextractor.dao.DataExtractorException: Cannot get data extractor for.  Reason:DEVPORTAL/DEVPORTAL
    at com.virsa.cc.dataextractor.dao.DataExtractorFactory.getExtractor(DataExtractorFactory.java:158)
    at com.virsa.cc.dataextractor.bo.ConnectorUtil.testConnection(ConnectorUtil.java:55)
    at com.virsa.cc.comp.CreateSystem.onActionTestConnection(CreateSystem.java:1728)
    at com.virsa.cc.comp.wdp.InternalCreateSystem.wdInvokeEventHandler(InternalCreateSystem.java:281)
    at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
    at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
    at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
    at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
    at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
    at java.security.AccessController.doPrivileged(Native Method)
    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.virsa.cc.dataextractor.dao.DataExtractorException: DEVPORTAL/DEVPORTAL
    at com.virsa.cc.dataextractor.bo.DataExtractorSAPPORTAL.init(DataExtractorSAPPORTAL.java:98)
    at com.virsa.cc.dataextractor.dao.DataExtractorFactory.getExtractor(DataExtractorFactory.java:152)
    I appreciate all your thoughts.
    Thanks,
    Mohan

    Hi
    Remember you have to use a rfc user on the ERP Back end, wich uses virsa roles. So you have to use user and password with JCO connection or SSO.
    Dont forget to check the SLD.  The logon groups should be configured in the right wat.
    regards,
    Alejandro

  • Error In ESH_COCKPIT while deleting Search Connectors ?

    Hi ,
    When I am starting the transaction ESH_COCKPIT and then trying to delete the search connectors created for HRTMC*
    it is giving an error
    "Software component EA-HRGXX has been locked by user <username>"
    Although I have deleted all the enteries in SM12 for my user , The error is occuring for any user who logs and tries to delete the search connectors .Hence I am unable to delete the connectors also when I am trying to create new connectors it is giving the same error.
    Kindly help me here !
    Regards,
    Soumya

    Hi Soumya,
    Try these SAP notes:
    1541984 - Search connectors are not found
    1542741 - Deleting connections
    If these don't work let us know.
    Best regards,
    Luke

  • Mass Delete Background Jobs in RAR

    We frequently run out of file space on our Dev box of RAR. The reason being that we have close to 1500 background jobs out there created/ran by multiple users. I know that we can select each and every row and with the Ctrl+ key.. delete them simultaneously. Is there a better way to delete the jobs from within RAR ?

    Hi,
    To delete multiple jobs in RAR, Search the jobs based on last run date and from the list of the jobs, press the Ctrl key + select the row. By holding the ctrl key pressed you can select multiple row of entries (jobs scheduled) and then can click on the delete button to delete them simultaneously.
    Hope this helps!!
    Regards,
    Raghu

  • Exchange Connector 3.0 (Hotfix Release) Error - Error Message=The key value of an object cannot be changed.

    Hello,
    I am running Service Manager 2012 with the Exchange Connector 3.0 RTM (Re-release Version).  The issue I have is that when an e-mail is processed that is trying to update the status or event log of an incident, the Exchange Connector encounters an error
    and will not update the object.  The Operations Manager log denotes: 
    Exchange Connector: Unable to process mail item. Subject="Close Ticket: [IRXXXXX]", Error Message=The key value of an object cannot be changed.
    This will happen on a seemingly random selection of Incident work items.  I cannot correlate them with a specific template, exchange connector, or incident tier queue that could be causing the issue.  I can recreate the way a specific ticket
    was created and update it through e-mail without issue, and the next ticket can cause the error to trigger. 
    I have already opened a Microsoft Support Case using our Software Assurance agreement.  After a few months of troubleshooting the issue and trying different fixes, Microsoft support said they were unable to fix the problem and that we would need to
    purchase Premier support to go further. At this point I thought I would reach out to the community for ideas.
    The setup I have for the Exchange connectors is as follows.
    I have three separate Exchange connectors set up to three different mailboxes.  One Exchange connector processes external support tickets and applies a specific template.  Another processes client support tickets and applies a different template. 
    And the last Exchange connector processes internal tickets and also processes the updates of tickets created by the other two exchange connectors. 
    Here are the fixes I've attempted so far:
    1.  Changed the templates that each Exchange connector applies.
    2.  Changed the management pack that each template is stored in.
    3.  Checked my management pack(s) for extended classes by searching for Extension="true" (This was also checked by Microsoft support)
    4.  Deleted each Exchange connector and recreated each connector
    5.  Deleted each Exchange connector, deleted the management pack, and reinstalled the management pack and connectors
    6.  Repeated Step 5, deleted Microsoft.SystemCenter.ExchangeConnector.dll and Microsoft.SystemCenter.ExchangeConnector.resources.dll and then installed the Exchange connector Re-release version 3.0 Published 10/7/2013 (which is supposed to address this
    issue)
    7.  Deleted the HealthServiceState folder and restarted the Management Service
    I'm not really sure what to do at this point.  I've put many hours into customizing my installation to get it working for my organization so reformatting and starting from scratch would be a nightmare scenario.  This environment is in production.
    I do have a band-aid in place using Orchestrator.  Basically I have a monitor task searching for the error message and when it finds one it searches the mailbox for the offending e-mail and applies either the Resolve or Close status change that is requested
    from the user.  However, I do not have it working to update the ticket if a comment is applied to the incident.  If anyone is in this position and needs to know how to apply this Orchestrator task I am willing to provide my workflow.
    I am new to the community and am already impressed with the amount of help and effort there is in this forum.  I appreciate in advance any help that is provided and am open to any ideas at this point.  I can post more information as needed.
    Thank you,
    John

    Yes that is the whole template.  However, I did confirm that this is only happening to incidents where either of two situations triggers a runbook to fire and modify the incident.  When I remove the activity from the incident it does clear the
    issue.  For some background the first Runbook Activity set's the first response date when an incident is resolved if the first response value is null.  The second assigns the incident to a user upon creation if the title contains assignto:username;
    1.)
    <ObjectTemplate ID="Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
    <Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.d33b5bbcaf3c49b18d8b72bc1e5e1ee4</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$">&lt;?xml version="1.0" encoding="utf-16"?&gt;
    &lt;ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;
    &lt;ParameterList&gt;
    &lt;RunbookParameterItem&gt;
    &lt;Name&gt;Get RA Guid&lt;/Name&gt;
    &lt;Id&gt;344b15effc1a44528e517c5b4227179c&lt;/Id&gt;
    &lt;Type&gt;String&lt;/Type&gt;
    &lt;Value&gt;Generic::Id&lt;/Value&gt;
    &lt;Direction&gt;In&lt;/Direction&gt;
    &lt;ContextInfo /&gt;
    &lt;/RunbookParameterItem&gt;
    &lt;/ParameterList&gt;
    &lt;RunbookId&gt;4085f0da-ab83-48e5-bbe3-1f3b5fa2dc4a&lt;/RunbookId&gt;
    &lt;/ParameterMapping&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1906</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Library!System.WorkItem']/Title$">Set First Response on Resolve</Property>
    </Object>
    </ObjectTemplate>
    2.)
    <ObjectTemplate ID="Template.b311e1f9126e4e19bbbbeb65ddb220ba" TypeID="IncidentManagement!System.WorkItem.Incident.ProjectionType">
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Escalated$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/Status$">$MPElement[Name='CustomSystem_WorkItem_Incident_Library!IncidentStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/NeedsKnowledgeArticle$">False</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Incident_Library!System.WorkItem.Incident']/HasCreatedKnowledgeArticle$">False</Property>
    <Object Path="$Context/Path[Relationship='CustomSystem_WorkItem_Activity_Library!System.WorkItemContainsActivity' TypeConstraint='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity']$">
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/RunbookId$">ca88b13b-861a-4d39-a3cb-fd912d951e35</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/TemplateId$">Template.b311e1f9126e4e19bbbbeb65ddb220ba</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/IsReadyForAutomation$">True</Property>
    <Property Path="$Context/Property[Type='CustomMicrosoft_SystemCenter_Orchestrator!Microsoft.SystemCenter.Orchestrator.RunbookAutomationActivity.Base']/PropertyMapping$">&lt;?xml version="1.0" encoding="utf-16"?&gt;
    &lt;ParameterMapping xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"&gt;
    &lt;ParameterList&gt;
    &lt;RunbookParameterItem&gt;
    &lt;Name&gt;RA Activity GUID&lt;/Name&gt;
    &lt;Id&gt;5677d117a0294a2c898a695032f26c72&lt;/Id&gt;
    &lt;Type&gt;String&lt;/Type&gt;
    &lt;Value&gt;Generic::Id&lt;/Value&gt;
    &lt;Direction&gt;In&lt;/Direction&gt;
    &lt;ContextInfo /&gt;
    &lt;/RunbookParameterItem&gt;
    &lt;/ParameterList&gt;
    &lt;RunbookId&gt;ca88b13b-861a-4d39-a3cb-fd912d951e35&lt;/RunbookId&gt;
    &lt;/ParameterMapping&gt;</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/ChildId$">1120</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Status$">$MPElement[Name='CustomSystem_WorkItem_Activity_Library!ActivityStatusEnum.Active']$</Property>
    <Property Path="$Context/Property[Type='CustomSystem_WorkItem_Activity_Library!System.WorkItem.Activity']/Skip$">False</Property>
    <Property Path="$Context/Property[Type='WorkItem!System.WorkItem']/Title$">Execute Orchestrator IR - Autoassign</Property>
    </Object>
    </ObjectTemplate>

Maybe you are looking for