Delimited Org Unit(having end date Current date) are not coming in Bex output.

HI All ,
I have problem with BEx query output while using the Org. Unit Time dependent Hierarchy structure. In ECC side some of the Org. Unit nodes were delimited or their end date set to less than current date. Now this hierarchy is loaded to BW on daily basis those Org. Unit also laoded to BW hierarchy and these nodesare not coming up in our query output. Client wants to see these unit data as it important to him.
Please suggest .
Thanks,
Arvind Venai

Hi Arvind,
As per my understanding, the valid to/end date for Hierarchy should be 31.12.9999. May I know what is Valid To in your case?
Did yo u check the change happend in ECC for hierarchy is reflecting in BW ?
There mught be some restriction in BEx Query , please check

Similar Messages

How to find delimited ORG unit in a report?

Hi All I need to find the org unit's which doesn't have end date as 12/31/9999 and delimited within 2 years in my report?
How can we achieve this ...waiting for reply
PS: I believe there is no LDB required..
Regards
Sas

>
> Hi,
> Where are you stuck?
>
>
HRP1000 table, field - OTYPE(check for "O" for org unit).
> get the difference between BEGDA and GDATE(delimited on) and check if it's more than two years.
>
> Regards,
> Sumit
I want ORG UNITS whose END DATE is within 2 years????
I Will give you scenarios
If HRP1000 table has changed for some reasons' and 5000(ORG UNIT) will create 2 records
Ex: 5000 jan 1 2005 dec 31 2009
                jan 1 2010 12/31/9999
This 5000 should't pick up as it has end date 12/31/9999 ok...
EX: 5001         JAN 1 2006 OCT 1 2007
                       OCT 1 2007   MAY 5 2009
Last record:    MAY 6 2009 Feb 6 2010
So this 5001 org unit should pick up as this last date is FEB 6 2010.
Sas
Edited by: saslove sap on May 3, 2010 1:59 PM

Activities under a delimited Org unit

Hello,
We have recently implemented EIC.
Have a simple query,if we delimit a particular Org unit,whether activities under that Org unit can be processed or not.
Thanks & Regards,
sushil

>
> Hi,
> Where are you stuck?
>
>
HRP1000 table, field - OTYPE(check for "O" for org unit).
> get the difference between BEGDA and GDATE(delimited on) and check if it's more than two years.
>
> Regards,
> Sumit
I want ORG UNITS whose END DATE is within 2 years????
I Will give you scenarios
If HRP1000 table has changed for some reasons' and 5000(ORG UNIT) will create 2 records
Ex: 5000 jan 1 2005 dec 31 2009
                jan 1 2010 12/31/9999
This 5000 should't pick up as it has end date 12/31/9999 ok...
EX: 5001         JAN 1 2006 OCT 1 2007
                       OCT 1 2007   MAY 5 2009
Last record:    MAY 6 2009 Feb 6 2010
So this 5001 org unit should pick up as this last date is FEB 6 2010.
Sas
Edited by: saslove sap on May 3, 2010 1:59 PM

Default date (current date - 1) on prompt

Hi Everybody,
I have BI 11.1.1.6.1
I have a Prompt in which there is a calender
I need Defalut date to be set as (sysdate - 1).
I tried
Need default date (current date - 1) on prompt
and
How to create a prompt with default value as current_date?
But it doesn't work in BI 11
Thanks

Hi,
Refer the screen short
http://imgur.com/Xopmt
go to edit your dashboard prompt-->edit you date prompt column-->expand option -->set Default selection as SQL Results-->Enter a SQL statement to generate the list of values
SELECT case when 1=0 then "tablename"."columname" else timestampadd(sql_tsi_day, -1, current_date) end FROM "subject area name"
E.x:
SELECT case when 1=0 then "Time"."Calendar Date" else timestampadd(sql_tsi_day, -1, current_date) end FROM "Sample Sales Lite"
this will return current date - 1 date values.
Thanks
Deva

GR Date & Current Date

Hi
We are using WE03 for printing GR in that GOODS RECEIPT DATE & CURRENT DATE is there what is this current date, what is the difference between two.
Regards
rang

Hi,
You may take the print of GRN any time after posting the GRN. Hence, it shows the GRN date (date on which GRN was posted) & current date (date on which the print was taken).
Regards,
Prashant Kolhatkar
Pl. reward points if answer is helpful

Applications show as up to date, but they are not current versions

I am trying to make deployable image of OSX 10.8.5.
CC desktop is telling us that applications are up to date, but they are not.
I have tried uninstalling and reinstalling the applications, only to have it go to an evem earlier version (the original CC release) and the CC desktop still says it is up to date.
I have also tried using CC Cleaner and reinstalling with the same results.
I also noticed that CC Cleaner didn't seem to completely remove all adobe files. In fact, EDGE applications and a few others still remained in the applications folder.
Can you give me any advice?

Hi bretts,
Please refer the steps mentioned in the article: http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.
Regards,
Romit Sinha

Cannot activate cellular data network you are not subscribed to

Cannot activate cellular data network you are not subscribed to a cellular data service. Never happened until I have switched to boost. I have spoken with them for hours and they say it's fine from their end and I've reset network settings, replaced my nano sim for my iPhone 5, restored my phone played with wifi on and off airplane mode on and off I don't know what else I can do. Please help me experts!

Under "settings / general / network" is your "Cellular Data" button set to "ON"?

HT4623 Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Hi. After I updated ios6, I couldn't use my cellular network. It said "could not activate cellular data network - You are not subscribed to a cellular data service". I don't know why. My iphone is 4s

Contact your carrier to ensure data access via their network is provisioned properly for your account and iPhone with the new iOS 6 update installed.

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service"

I purchased an unlocked iPhone4 last month. Everything was fine till yesterday. Today morning when I tried to check mail, i suddenly got an error message saying " Could not activate cellular data network: you are not subscribed to a cellular data service", when I checked on my network settings i was not able to find the cellular data network tab ( where we use to input APN manually). i even tried to restore my iPhone to its factory settings, Still it remains the same. i cant able to connect to Internet using cellular data. help me...Plz..

Where did you purchase it from? There are lots of iPhones sold as "unlocked" which are carrier locked phones that were hacked and are not officially unlocked. These phones are subject to re-locking to the original carrier, particularly when updated.

The types of the parameter field and parameter field current values are not compatible.----

HI,
I am attempting to set report parameters in my .jsp code via URL parameters.
I am able to set the report name, server connection dynamically however when attempting to set the Parameters I receive:
com.crystaldecisions.sdk.occa.report.lib.ReportSDKParameterFieldException: The types of the parameter field and parameter field current values are not compatible.---- Error code:-2147213303 Error code name:invalidParameterField
The parameter on the report is a String Type, named for this example p1.
The value that p1 represents is LERAD
My code:
String stringValue = request.getParameter("p1");
CRJavaHelper.addDiscreteParameterValue( clientDoc, "","p1", stringvalue);
returns the above mentioned error.
I have tried:
String stringValue = (String)request.getParameter("p1");
which returns the above error
And;
String stringValue = new String(request.getParameter("p1")).toString();
which returns
java.lang.NullPointerException
java.lang.String.<init>(Unknown Source)
org.apache.jsp.callReport_jsp._jspService(callReport_jsp.java:105)
org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:432)
org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:390)
org.apache.jasper.servlet.JspServlet.service(JspServlet.java:334)
javax.servlet.http.HttpServlet.service(HttpServlet.java:722)
I notice that the CRjavaHelper.java declares this addDiscreteParameterValue as accepting an Object type for the newValue.
Any ideas???

Hi,
nevermind.
case sensitivty strikes again.
my URL param was P1 ( case sensitive)

Org unit Hierarchy structure at Key date

Hello Friends,
We have an issue with displaying HR Org unit hierarchy structure between two calendar months.
The BI Report has a selection parameter to select Org unit hierarchy , Calendar month From and Calendar month To
The BI Report is to display the no.of sick absence days for employees in a chosen Org unit hier.
Employee A had a sick absence of 5 days in the month 04.2011 in the Org unit X . The same employee had a sick absence of 4 days in 05.2011.The Org unit X then delimit in 05.2011 , the Org unit X is no longer in Org structure from 05.2011.
When we run the report for 04.2011 to 04.2011 , the employee A is showing absence   under Correct Org unit ie X with correct Org structure .
When we run the Report for 05.2011 to 05.2011 , the employee A is showing absence under hierarchy Org unit Not assigned which is OK .
But the issue is when we run the Report from 04.2011 to 05.2011 , The employee A absence days 9 (5 +4 ) showing under Not assigned Org unit hierarchy structure which is the latest Org unit .
When I deactivate the Org unit hierarchy and choose tech name of Org unit , It is showing correct Org unit key
But The user would like to see 5 days under org unit X and 4 days under Not assigned with Correct Org unit hier structure when we run the Report from 04.2011 to 05..2011 .
We have a user Exit variable for the Key date in the Bex Report which seems to be taking only one date at any time .
Is there any way to get the correct figures under Org unit hier structure where employee had absence in when we put range of calendar months on a selection screen ?
Any advice appreciated.
Thanks.

Hi,
You can try adding two more attributes to Org Unit as "Calender month from" and "Calender month to".
In these attributes maintain the validity period for the corresponding master data.
For example, in your case you can maintain the master data as:
Employee | Org Unit | Calender month from |Calender month to | sick absence
A | X | 4.2011| 4.2011 | 5 days
A |    | 5.2011 | 05.2011 | 4 days
And in report use variables for Calender month from" and "Calender month to".
Hence, when user executes the report with selection as:
Calender month from" = 04.2011
"Calender month to"    = 05.2011
The data will be read from master data based on these selections along with key date and report will show output as expected.
Employee | Org Unit | Calender month from |Calender month to | sick absence
A | X | 4.2011| 4.2011 | 5 days
A |    | 5.2011 | 05.2011 | 4 days
Hope this works for you.
Regards,
Geetanjali

Cancellation billing date = current date

Dear all,
I have a requirement that cancellation billing document date as current date. For example my billing document date is 15.03.09 and iam cancelling that billing on 31.03.09, so i require biiling date of cancellation document as 31.03.09.
Kindly provide me information, thanks in advance.
V S Kumar

Hi,
Is there any possibility that system should determine automatically not by giving the billing date as a manual entry for cancellation billing document?
Thanks in advance
V S Kumar

Prompt with Default date (Current Date)

Hi Experts,
I have WEBI Report With Calendar Date (0CALDAY) Object on a OLAP Universe (OLAP Universe built on SAP BW BEx Query).
I need to create a prompt on Calendar Date Object with default value as Current date (systemdate). I need to create this at universe level not at BEx level (No Exceptions).
Looking forward to hear from you.
-Thanks,
Deepu

Hi Ingo,
Thanks for your response.
>
Ingo Hilgefort wrote:
> this is because a EXIT VAriable doesn't have a DEFAULT value.
>
> Ingo
But EXIT Variable has a DEFAULT value in BEx Designer. DEFAULT Value (Current system Date) is populated when a BEx Query is Run. How come it is not properly reflected into BOBJ?. It retrieves the data for Current system Date in BOBJ too when WEBI Query is run but it does not show Current system Date in prompt screen.
I hope you understand my problem.
-Thanks,
DEEPU.

Delimiting Org Unit

Hi All,
i have an issue. When i am delimiting an org unit using Po10 system is giving me a meassgae that
"IT1000 can only be delimited via Delimit Objects."
What does that mean? Also How can I delimit an object?
Regards
Aryan

Hi,
No it does not allow me to delimit object using Po10, PP01 or PP02.
Also in main screen of Po10 is i select the IT1000 and go to delimit icon in the proceeding screen i cant delimit
org unit.
Does it has to do anything with some logic or concepts?
How can i delimit object?
Aryan
Aryan

Master data load: texts are not loaded

Hi friends,
Trying to load BW Hierarchy(0COSTCENTER) to BPC dimension(P_CC).
Loadedd master data & text data using package "Import master data from BI infoobject"(/CPMB/IMPORT_IOBJ_MASTER), but EVdescription (texts) are not uploaded ino BPC dimension (P_CC).
Because of above error, when i try to load hierarchy(0costcenter), sytem throwoing one more error(JScrpit evaluation error).
Now i want to load texts into P_CC. ours is bpc 75nw sp10.
Found 2 notes, but these are related to older support packges
1462732 u2013 DM: text node descriptions canu2019t be imported.
1531601 - Incident 737084 / 2010 / text nodes aren't loaded
Transformation file:
*OPTIONS
FORMAT = DELIMITED
HEADER = YES
DELIMITER = TAB
AMOUNTDECIMALPOINT = .
SKIP = 0
SKIPIF =
VALIDATERECORDS=YES
CREDITPOSITIVE=YES
MAXREJECTCOUNT=-1
ROUNDAMOUNT=
*MAPPING
ID=ID
CURRENCY=0OBJ_CURR
*CONVERSION
DM package run:
Infoobject: 0COSTCENTER
set selection: Attributes Controlling area = SP00
                       Hierarhcy: import text node(yes), selected hierarchy, version(empty),memberid(SP001170),level(not filled)
                       language: English, medium description,
                      attiribute list: currency(0OBJ_CURRENCY),controlling area
fileter by attributes or hierarhies option selection,
Mode: Update
Format: internal
Dimension: P_cc
package ended with error
Failed to write text of master data; check the error message
checked BPC dim, only member ID & currency is updated, but not evdescription.
Can you please share valuable inputs.
thanks,
naresh

resolved problem.
Packages given bpc7.5 nw sp10 are is exactly working.
Mapping section:
ID=0CO_AREA+ID
CURRENCY=0OBJ_CURRENCY
becoz base members are automatically added with controlling area in BW hierarchy on 0costcenter.
Followed method given in how to guide.

Delimited Org Unit(having end date Current date) are not coming in Bex output.

Similar Messages

Maybe you are looking for