Delivery address appearing at Item level and not at Header level in PO

Hello Experts,
We are facing an issue as described below:-
We are in SRM 7.0 using classic scenario.
After approval of multi line Shopping Cart in SRM ,PR's are getting
automatically created in backend R/3 system.After converting PR's into
POs in backend R/3,we are observing that the delivery address for these
PO'are getting printed at Item level and not at the Header Level
inspite of the delivery address being same for all the Item level.
As desired,the delivery address in the PO's should have the delivery
address at the header level if the the delivery address is identical
for all the Item Levels.
However,if we create a PR directly in R/3 system and then convert these
PR's into PO's in the backend R/3 system,we find that the deliver
address are getting printed at the Header Level if the delivery address
is same for all the item level(which is as desired)
Any pointers will be highly appreciated.
Thanks & Regards,
RKS

HI Paul,
Thank you for your response.In our case even if all the Line/items level have same Plant and storage location still the delivery address is getting printed at Item level and not at Header Level and this is happening only for PO's created from PR's orginating from SRM7.0.
However if we create PR's directly in R/3 and then convert them into PO's,the delivery address is getting printed at the Header level if the delivery address is same for all the Item level.
Can you plz some insite into this?
Your help will be highly appreciated.
Regards,
RKS

Similar Messages

  • Delivery address at Item level and not at Header level in PO

    Hello Experts,
    We are facing an issue as described below:-
    We are in SRM 7.0 using classic scenario.
    After approval of multi line Shopping Cart in SRM ,PR's are getting
    automatically created in backend R/3 system.After converting PR's into
    POs in backend R/3,we are observing that the delivery address for these
    PO'are getting printed at Item level and not at the Header Level
    inspite of the delivery address being same for all the Item level.
    As desired,the delivery address in the PO's should have the delivery
    address at the header level if the the delivery address is identical
    for all the Item Levels.
    However,if we create a PR directly in R/3 system and then convert these
    PR's into PO's in the backend R/3 system,we find that the deliver
    address are getting printed at the Header Level if the delivery address
    is same for all the item level(which is as desired)
    Any pointers will be highly appreciated,
    Regards,
    RKS

    This may be an old note, but it may point you in the right direction: Note 450425 - Delivery Address creates individual R/3 address number.
    If you debug the function module in SRM that creates the PO in ECC, you can check if this is the case.
    Regards,
    Robin

  • Delivery address at Item Level and not at the Header Level

    Hello Experts,
    We are facing an issue as described below:-
    We are in SRM 7.0 using classic scenario.
    After approval of multi line Shopping Cart in SRM ,PR's are getting
    automatically created in backend R/3 system.After converting PR's into
    POs in backend R/3,we are observing that the delivery address for these
    PO'are getting printed at Item level and not at the Header Level
    inspite of the delivery address being same for all the Item level.
    As desired,the delivery address in the PO's should have the delivery
    address at the header level if the the delivery address is identical
    for all the Item Levels.
    However,if we create a PR directly in R/3 system and then convert these
    PR's into PO's in the backend R/3 system,we find that the deliver
    address are getting printed at the Header Level if the delivery address
    is same for all the item level(which is as desired)
    Any pointers will be highly appreciated.
    Thanks & Regards,
    RKS

    It is standard process only.
    In Po delivery address is maintained at item level because to which address perticular material to be delivered,
    this may change from material to material or may not change

  • Making vendor down payment at PO header level and not item level

    Hi
    I am making downpayment to vendor. I am using new functionality in EHP 4 for making downpayment through purchase order. When I run ME2DP for making downpayment, it asks for PO item number also.
    But my requirement is to pay downpayment at PO header level and not PO item level.
    Please let me know how can I do payment at PO header level.

    Dear All,
    I am also facing the same problem. Though Advance is maintained in PO Header Level when we are trying to create  DP Request / DP system is asking line item mandatory. Suppose i have 2 line items  and maintain all the DP amount in first line item. I am making service entry for 2nd line item and bill for the second line item. Then in this case, the Down Payment clearing tab doesn't appear in MIRO. That means I am unable to adjust the advance for the line item though I have to adjust it.
    Problem is that there are more than 300 lines items in PO/WO. Hence it becomes difficult to maintain advance for each line or the user is forced to maintain certain amount in line item..
    Please help ..Its urgent
    Regards,
    Ganesh

  • ASCP Taking Lead time to buy Item from Item Level and not from ASL

    Hi All.
    We have a buy Item Which is used at multiple Organization now we have defined processing Lead time for this Item at Item Level and ASL level (Global) However for different organization Like ABC and XYZ we have same supplier and Supplier Site for this item,
    Below is the details of Item
    Item's Processing Lead Time at Item Level
    Org - ABC - 35
    Org - XYZ - 15
    Item's Processing  Lead Time at ASL Level
    Org - ABC - 10
    Org - XYZ - 5
    Now when we run ASCP plan for org XYZ and check for exception, Item's Lead time is coming from Item Level (15) not from ASL Level (Does this is expected behavior from Oracle?)
    Regards.

    Hi Abhishek,
    I tested one more time with the same scenario, this time ASCP is considering Processing lead time form ASL only however it is considering processing lead time for another organization (When I am running ASCP plan for Org XYZ ASCP is considering Processing lead time for ABC).
    Does it is due to same supplier site for both the organization?
    Also it has an active sourcing rule for the same supplier
    Regards.

  • After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one,  When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine.  How

    After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one,  When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine.  How do I correct this. I am using Windows 8.1 .  My wife has never had an iTuunes account

    Hello Lakesidetom,
    It sounds as though you are experiencing an issue with an Apple ID and authorizations. Based on your post, it sounds like you are familiar with the authorizing and deauthorizing process. The Apple ID in question (your wife's email) may be originating from the iPhone you are attempting to update. Is it possible that your wife created an Apple ID or iCloud account which is signed in on that iPhone? Below, I have included links to some resources that may help you determine if your wife has created an Apple ID:
    How to find your Apple ID - Apple Support
    Use these steps if you forgot your Apple ID or aren't sure that you have one.
    Apple - My Apple ID
    If you can't remember your Apple ID, just provide us with some information and we'll find it for you. Then we'll help you reset your password.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album.  How do I get them back together again other than a playlist.  I do not want the tracks showing up as albums on the Touch?

    Some albums I put on my Mac to later sync with a Touch appears as seperate tracks and not a single album.  How do I get them back together again other than a playlist.  I do not want the tracks showing up as albums on the Touch?

    Are your tracks pat of a collection? Different artists, but still one album? Then mark them a s acollection or set the album artist. See this guide on how to group separate tracks into albums:
    iTunes: Grouping Tracks Into Albums

  • Validation at View Object level and not Enity Object

    How would you create validation logic at the view object level and not at the entity object level? I have many VOs that reference the same EO and want some validation logic to be applied only to certain VOs.
    Thanks,
    Quoc

    My use case for this is to perform form validation inputted by the user via a JSPX page.

  • Can a CR work only for one aggregation level and not other ?

    Hi Experts,
    I have a real time infocube (RTIC) over which there is a multiprovider, on top of which I have built 2 aggregation levels.
    There are sequence of 2 characteristic relationships (CR's based on exit class) defined for the same RTIC.
    Is it possible that the CR's be functional for one aggregation level and not in case of second aggregation level ?
    Thanks and Regards,
    Pankaj

    Additionally let me explain the scenario in more detail:
    The difference between 2 mentioned aggr levels is that of 0CALMONTH which is checked in second aggr level.
    0CALMONTH is assigned as target char in first CR, hence both the CRu2019s work for input ready report built on first aggregation level and do not function with input ready report built over second aggregation level.
    Therefore I wish to skip the complete execution of CRu2019s for I-R reports based on 2nd aggregation level.
    As CR of type with derivation is functional only if the target char selected is not present in the aggregation level.
    Please let me know if any more details are required.
    Thanks,
    Pankaj

  • Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help

    Screen stuck on gray, used shift key and my screen appears with MacBook Pro and not the recovery option. Please help!

    Hi ..
    Shift key boots into Safe Mode, not Recovery.
    This only works on a Mac running v10.7 Lion or later.
    Startup your Mac while holding down the Command + R keys. From there you should be able to access the built in utilities to repair the startup disk and restore OS X using OS X Recovery
    If you can't boot into Recovery Mode, help here >   Mac OS X: Gray screen appears during startup

  • HT5312 forgot answers for security questions, my apple account has updated email address but the rescue email address  for account is old and not accessible - do not know how to update that address so i can authorize new devices...

    forgot answers for security questions, my apple account has updated email address but the rescue email address  for account is old and not accessible - do not know how to update that address so i can authorize new devices...

    Welcome to the Apple Community.
    Start here (change country if necessary) and navigate to 'Password and Security', reset your security questions using the link provided, you will receive an email to your rescue address, use the link in the email and reset your security questions.
    If that doesn't help, you don't receive a reset email or you don't have a rescue address, you should contact AppleCare who will initially try to assist you with a reset email or if unsuccessful will pass you to the security team to reset your security questions for you.
    If you are in a region that doesn't have international telephone support try contacting Apple throughiTunes Store Support.

  • HT4968 My "Home" calendar only appears on my Mac and not the Cloud even though "Home" is checked in all places.

    My "Home" calendar only appears on my Mac and not the Cloud. If I uncheck "home on my mac" all events disappear even though it's still checked on the iCloud calendars.

    (unless you already have one) Create a new empty calendar from the iCal file menu, select which account you want to create it in.
    If you have only a few appointments you can move them individually by editing them and changing the calendar in the edit options.
    Alternatively you can copy all the appointments in one calendar to another and delete the original.
    To copy a calendar ctrl-click on it from the menu that appears when you select the calendar button (top left corner of iCal) and choose export (export it to your desktop for ease)
    Double click the exported file and choose the new empty calendar to import them into.
    Ctrl-click on the original calendar from the menu that appears when you select the calendar button and choose delete.

  • My ipod is locked on the initial screen that appears black apple logo, and not respond to any button, please someone knows I do? PLEASE it is urgent

    My ipod is locked on the initial screen that appears black apple logo, and not respond to any button, please someone knows I do? PLEASE it is urgent

    Try to connect in recovery mode, shown here: iPhone and iPod touch: Unable to restore

  • Delivery address in PO item level

    Hi,
    in PO item level there is a tab "Delivery address". Under this tab there is a Field "Address" having data for eg. 22706.
    1.Please tell me from where this "address" comes. where is the customization for this "address".
    2.Delivery address, is it related to storage location in the line item.

    kunalc13 ,
    The address number used will be maintained on PO item table EKPO. The address number it uses is determined as follows (assuming standard SAP without user exits):
    Default address;
    - Storage Location Address, if maintained,
    - Plant Address, if maintained AND If Storage Address is not maintained,
    - Company Code Address, if maintained AND if the Plant & storage location addresses are not maintained
    - Blank, if none of the above have been maintained
    - If you look in table ADRC, this address will be assigned to address group CA01 (Customizing address)
    - Maintenance of these addresses are performed in configuration.
    The user has the option to change the default address, or add a vendor number,
        custom number, or address number in the fields on the right. They can only do
        one of these, not a combination of them
    - Manual change of an address on the address tab:
         - If the address is physically changed on the screen, SAP will generate a new
           address number that applies to this PO only and cannot be reused on future POs.
         - In table ADRC, this address group is ME03 - One time vendor address.
      - If they choose a vendor, the vendor number appears on the address tab, the address
         number for that vendor will be in table EKPO, in ADRC, it will account group BP
         (Business Partner)
       - Maintenance of this address is performed in the Vendor Master
      - If they choose a customer, the customer number appears on the address tab, the
        address number for that customer will be in table EKPO, in ADRC, it will account
        group BP (Business Partner)
       - Maintenance of this address is performed in the Customer master
       - If they choose an address number, that number appears on the address tab, and
         that address number will be listed in ADRC as address group ME01 (Delivery Address)
       - maintenance of these addresses are performed in transaction code MEAN

  • Delivery address in PO item level with no addressnr

    Hello,
    I have to print the delivery address in a form. This goes correct if the addrnumber is filled in the tab PO-item/delivery.
    However if this addressnumber is not filled it is not printed.
    Searching in adrc i have found the correct addressnumber (which is not shown in ME23N). But i cannot found the link between this po-item delvery address and this addressnumber.
    does anyone could me tell the link between this.

    In the received IT_EKPO table, look for address til found
    - ADRN2
    - ADRNR
    - If KUNNR is not initial, look for a customer address (select from KNA1)
    - If EMLIF is not initial, look for a vendor address (select from LFA1 or use FM VENDOR_MASTER_DATA_SELECT_00)
    - If WERKS is not initial, look for a plant address (FM MM_ADDRESS_GET)
    Look at the standard forms delvered by SAP (*) to get more information and coding samples)
    Regards,
    Raymond
    (*) You can also look at best practices forms for your country or industry

Maybe you are looking for

  • With Firefox 8.0.1 using Mageia 1, I am unable to log into Verizon mail or My Account. I can log in withFirefox 8.0 with PCLinux OS 2011.9 KDE.

    I am using a Dell Inspiron 530 Desktop computer. I can log-into Verizon from Windows Vista Home Premium or any Linux version using Firefox 8.0, I am unable to log-in with Firefox 8.0.1 with Mageia Linux 1. Cheers. Ray.

  • Stage color "missing" in SWF

    One of our clients is having an error that we can't reproduce and I'm wondering if any of you have seen this issue before. We have a menu bar on their site ( see it here) that has the stage color set to a navy in Flash 8. Only on one person's browser

  • Strange error $Proxy91

    Hi everybody! I was just wondering if some could help me with my problem. I wrote a java bean and have deployed it on a server. So in JNDI there is an entry ".+ - CandidateBean (class: org.jnp.interfaces.NamingContext) + - remote (class: java.lang.Ob

  • FF 3.6.8 and4 or 5 previous versions ALWAYS crash on ANY download.

    Anytime I download a file of any type, from gmail or from a website, as soon as the download is complete, FF crashes. Has been doing this for as many versions have been offered for the last two years or so. I don't download large files so don't know

  • Getting at a Tile's children's children ?

    I've been puzzling with this for 2 days now and it's driving me crazy - please help me if you can. Using AS I add children to a Tile. Each child consist of a <vbox> containing 2 <image>. What I want to do, is to be able to loop through the Tile and g