Delivery address change
Dear pandits,
I wish to make certain changes in delivery address in purchase order.
Pincode should come after city name.
Counrty name is depicting as Repubic of India, I do not know from where it is picking up.
Telephone No.given in the communication data which is not flowing in delivery address. How to add, is it from abab?
thanks in advance
balajee.v
hi,
to add the field use the userexit :
MM06E005 - Customer fields in purchasing documents
Hope it helps..
Regards
Priyanka.P
Similar Messages
-
How I can find the Delivery address changes in purchase order
Hi Friends,
How I can find the Delivery address changes in purchase order
item details.And how i can find who did ths changes.Hi,
Go to ME22N, here select the line item and click on menu "Environment > Item Changes" to track the changes.
For multiple POs, go to ME2N, here enter Selection Parameter as "ALLES" and execute the report to check all the changes. -
Delivery Address changes in third Party Scenario
Hi All,
System is not allowing to make changes in delivery address (At PR/ PO Level) for Third party Scenario (Sales Order based).
I had checked the Field Groups of PO/ PR Knowm to me and try to make delivery address field editable. but didnt get any success. Is it Possible to get the dellivery address field in change mode for third party Scenario. If yes, how?
pls. Note: I'm not talking about the Manual third party order processing.
Regards,
S AnandWhy dont you want to make a change at SO level?
From OSS note 550192 - FAQ: Changing third-party and individual PO items
Question: What do I have to consider when I change the ship-to party for the entire sales order or for a third-party item?
Answer: In the third-party scenario, the ship-to party of the third-party item in the sales order is identical with the delivery address of the respective purchase order item. Up to and including Release 4.5, there is no automatic function for a synchronous change so that this must be done manually in both documents. As of Release 4.6, the system automatically updates the delivery addresses from the purchase order items if the ship-to party of the third-party item changes. The change of the delivery address in the purchase order is therefore no longer possible; thus the 'Delivery address' is only displayed in the display mode in the purchasing transaction.
For additional information, refer to Note 204190. -
Delivery address change in third party PO
Hi all,
There is a requirement that the user should be able to change the delivery address in a third party PO. The process is like SO is created with TAS item category which will create a PR with "S" item category and subsequently the PO with respect to PR. Now for reasons the customer may ask to change the delivery address given at the time of order. Now in standard SAP, a third party PO delivery address cannot be changed in PO (as the field would be disabled) rather in SO. But the user wants to change in PO itself and not in Sales order. One possibility for this is that the delivery address need not be a ship-to-party address rather could be a one time address without any masters. So the user need to manually type in the address.
Could anyone suggest a way by which the user is allowed to key in the address manually in such PO.
thanks & regards
asbin.Hi Rajesh
thanks for ur response. But when a PO is generated from a PR which is automatically created when a third party SO(TAS item category) is created, it will not allow to change the delivery address in PO. Even in change mode the delivery address fields remain gray. I know this is against standard SAP ,but would like to know whether there is any workarounds to change the delivery address in PO itself.
thanks
Binesh. -
In SAP 4.6 - Purchase order delivery address - Change
Hi All
I have created a PO and in print preview i can see the delivery address as plant address, which is also in PO item details. Now the EKPO-Address number does not have any value.
Once I have changed the delivery address in item details, the delivery address is blank in PO - print preview and also i can see a value in EKPO - Address number.
This value is exists in ADRC, which has the changed address. But the changed address is not in PO print preview, the preview is without deliver address only.
Please give some views about this. SAP version is 4.6
Thanks in advance
ARASDelivery address follows the rule
1. If Plant Address is maintained in Customisation, system will pick Plant address as delivery address
2. If Plant and Storage location address is maintained in customization and both plant and Sloc is maintinaed in P.O line item then Storage location address will pick.
3. If you cahnge the derived Default address to your own address, system will take precedence over the above 2 and create a address record, where you can see at ADRC, ADR6 I believe.
At present when you are making blank manually in the delivery address system is behaving properly by not picking the address.
Hope the above clarification will help you understanding , and you also simulate to get the result. -
Delivery Address Change in Contract (Urgent)
Hi
we created contract on that the delivery address is coming wrong not our company address it comes some vendor address how to remove that
please guide me urgent
Regards
Chidu
Thanks Guys
it has been solved
Edited by: Chidambaram Muthukumarasamy on Feb 13, 2008 11:57 AMFrom Store loc it take the address while remove the store loc in po it comes correct
Thanks -
Delivery Address in Despatch Advice
Hi all,
Where in despatch advice, we can enter delivery address? My client use to maintain one dealer in system but the delivery address changes every time depends on the client.
Best Regards,
AI.Hi,
One idea. Create a new partner role and use for this role a customer CPD, when the system set it, then it ask you for the adress.
I hope this helps you
Regards,
Eduardo -
How to populate VENDOR in Delivery ADDRESS tab durinG PO creation/Change
Hi Expert,
which structure is used to populate VENDOR in Delivery Address TAB in PO creation /Change using BAPI (BAPI_PO_CREATE1/BAPI_PO_CHANGE).
VENDOR SCREEN FIELD NAME IS CMMDA-EMLIF. Actually this field is available in EKPO and I have been asked to modify this filed only corresponding to PO. But direct modification of EKPO is not good practice . what I'm trying is, using BAPI_PO_Change to make this change. can we do this at time of PO creation using BAPI_PO_Create1?
Thanks in advanceHi,
You can use the above BAPI's and fill the structure -POITEM with the field : SUPP_VENDOR{Vendor to be supplied/who is to receive delivery}
Simultaneously you need to update the field SUPP_VENDOR to X of the BAPI structure POITEMX
Hope this helps
Regards
Shiva -
Delivery address of PO is not geting disp in print o/p when it is changed
Hello,
When delivery address is changed at PO line item it is not getting displayed in print output.
Before change it is getting displayed.
Note - system is 4.6C.
Thanks - aadilHi,
Why you want delivery address should change once you change storage location in your purchase order?
Universally purchase order considered as committed document by business which provides to vendor with defined delivery conditions such as price, delivery date and delivery condition etc.
Now you need to check/understand – how delivery address designed for your purchase order layout where some times delivery address hard coded in your PO Smartform( refer NACE t.code wwith EF application and find your purchase order ouput type assigned to Smartform ) or delivery address picks from plant address which is available in t.code:OX10
Regards,
Biju K -
Report to Monitor the change of delivery address on the delivery document
Is there a report that can show me when a user had changed the delivery address in a sales document or delivery document. The ship to # would stay the same but the address can be changed within the sales document which does not effect Master Data records.
We are trying to moitor this to find where users have modified the address when shipping a delivery.
ThanksGrant,
I was unable to find a solution to your problem. I think it is unlikely that this change
when a user had changed the delivery address
is explicitly recorded by SAP. In the systems I looked at today, address changes in Sales docs are not among those that are automatically recorded.
You can, however, look in table VBPA. If an address has been entered manually (vs the normal automatic determination via customer master tables), then VBPA-ADRA is changed to 'E'. Unfortunately, I can't find any place where this event is time-stamped, or the user responsible is recorded. You might be able to intuit the user using other means.
Regards,
DB49 -
Plant address not changed in PO delivery address
Hello, I have changed a plant address in DEV & moved to QAS.i can find all the changed data in QAS in OX10.but when i create a new po for the same plant, print preview & delivery address tab is picking old address. how to handle this? please guide me.
Regards
Bheemahave changed a plant address in DEV & moved to QAS.i can find all the changed data in QAS in OX10.
Where exactly did you change the address and check for the address?
Often misunderstood, the address has to be maintained by clicking the envelope button in OX10 -
How to change delivery address of limit order shopping carts?
I created and hold a limit sc. Afterwards I wanted to change the delivery address of the position by starting 'status check' and update sc.
I cannot find a tab with delivery address according to the screens of 'wizard'.
I get only the display of preferences for new shoppinc cart lines.
We have SRM 5.5 Server and ECS.
Can anyone help me?
Regards Joe
Edited by: Joe on Oct 16, 2008 5:35 PMHi Joe,
Did you try to do via default ADDR_SHIPT address atribute? so this default values applicable to your limit sc also.I agree Joe. you are absolutely correct . There is no ship to address / location folder to change the delivery address in limit shopping card. We can not see ship to address folder in limit sc.
DEFAULT SETTINGS FOR ITEMS HAS SHIPT TO ADDRESS so you could not see.
regards
Muthu -
Hi Experts,
I want to change the delivery address in PO for a particular Account Assignment Category. When the category is 'Z', I want to fetch the sales order ship to party address which is mentioned in Account assignment tab by clicking more button. I have found the enhancement MMDA0001 - Default delivery address where i can pass the adrnr . But i am not getting the account assignment tab values in the debugger.
Its urgent.
Awaiting your responses.
Thanks & Regards
Akshay JHi Akshay,
BADI ME_PROCESS_PO_CUST may helpful you to achive this.
Regards,
KAUSHIK SAVALIYA -
Change delivery address in third party po
Hi,
In third party PO the delivery address field is a display only, the data comes from the customer's address (from the SD order).
In some cases we would like to change the delivery address (we need to send it to the currier that has different address (.
This can not be change by customization,
Can someone suggest me what to do? Do I need a development for that?
Which user exists?
Thanks,
Tal SassonDear Tal Sasson,
You can choose to make fields display only, required entry, optional, suppressed for a particular transaction. Choose either optional or required entry for the fields that you want to enter (uncheck display only option).
You can achieve this in 2 ways.
1. in IMG under
Materials Management -> Purchasing -> Purchase Order -> Define Screen Layout at Document Level
2. You can use transaction SHD0.
http://help.sap.com/saphelp_webas620/helpdata/en/eb/5fab41d79b11d296190000e82de14a/content.htm
In the SAP Reference IMG, you can create transaction variants. Choose Basis Components -> Application Personalization -> Tailoring of Application Transactions -> Configure Transaction-Related Display Values for Fields (Transaction SHD0). Transaction variants allow you to preset values for fields in a transaction, set field attributes, or hide entire screens.
To execute a transaction variant, you define a variant transaction using the Transaction Maintenance transaction (SE93).
Once you have entered a transaction code and short description, choose transaction type Transaction with variant (Variant transaction).
To define a variant, enter the name of the transaction and the name of the variant. You can then use the new transaction code to start the special variant of the transaction.
Hope this will help.
Regards,
Naveen. -
PO printout is not coming after changing only line item Delivery Address
Hi
Can anybody suggest a solution for the problem?
Using ME22N , if I change the line item delivery address details to the already generated manual address number ( Not generated using Transaction MEAN)
If I save the PO then PO Printout is not coming but output message log showing " No print-relevant changes to document XXXXXXXXX exist"
We can read CDHR and CDPOS table for changes .
Is there a way to pass the parameter to the print program to Print the changes?
Thanks
sanath
Edited by: sanath kumar sarvepalli-venkata on Nov 2, 2010 11:23 PMHi,
In IMG - Materials Management- Purchasing-Messages - Fields relevant to Print out of changes
Enter Table EKPO , Reference Field LOEKZ, tick on change print relevant for purchase order,in routine enter 03.
Now your Output will be triggered with a change indicator and you can process it using ME9F.
Regards
Chandra Shekhar
Maybe you are looking for
-
100% zoom is too small on screen
Hello, I'm using photoshop CC on amacbook pro retina. I mainly use photoshop for web design and when I open a document that is 300x200 px, the 100% view is too small on screen. Any ideas, It was this way on PS cs6 also before I upgraded. I just tried
-
Got Pacifist..but am I lost on trying to use it ! Expert help please !
Having trouble with lost files like everyone else,sssoooo... I got Pacifist, thinking I can do this! I havn't a clue on what I am doing! Just not "techy enough" to know what to do. I open Pacifist with the "open package button, then where to and what
-
Hi all, Well I got cracking on the books and I don't know if I am already getting fatigued, but there are a series of questions I want to ask to get this stuff under my belt. First of all I a confused with method overloading and overriding. I have co
-
Skillbuilder Modal Page: Popup to close on session time out
Hi All, I implemented skillbuilder modal page plug-in in my application. When a session expires, the Popup window remains open and in the same popup window current page gets redirected to login page. I want popup window to close so that users can log
-
Interfacing with C API/SDK and other questions
Please be patient with me, I am new at Java and J2me.... 1. What are the limitations in using J2me v 2 in writing apps (non games for a mobile device? 2. Can J2me interface with C APIs/SDKs Is there a JNI for J2me? 3. What Functions are available for