Delivery block not updated in sales order after released VKM3
Hi all,
I am facing below error
after released credit block throuh VKM3 also i am unable to delivery becasue it is not updated still block exist in sales order level.
i made all nacessary settings for that and also i tried through VKM1 but this tcode through error no poosible entries.
Thanks in advance
Srinivasa
hi,
check the following steps of assignment you did right or not
1)first check in t- code FD32 U assigned authorization person & each credit limit U shud assign
an authorization person along with credit limit
2) check - conditon records with KRML output is there or not
please read standard SAP config help as a check point doc.[Credit mgmt|http://help.sap.com/printdocu/core/Print46c/en/data/pdf/SDBFCM/SDBFCM.pdf]
Let me know if it is soling your issue...
rgards,
rajeev
Similar Messages
-
'Transit time' not updated in Sales orders.
Dear Experts
We have maintained '20.00' days for the Route.
Then the Sales order got created and the same route has been determined.
But while i checking the schedule line - shipping details.
The Transit time not reflected in the Sales order...
All those GI date/Loading date/MAD/TPD...etc, still the same date as Delivery date.
Hope kindly advise, why the 20 transit days not updated in Sales order??
Thank you very much.The delivery date will confirmed based on ur availability check .
Check ur setting for transportation planning for this . -
Condition type value not update in sales order
Hello Guru's
As per the sales order in VA01 the condition type value i.e surcharge value is not updating in sales order.
But I have maintain the condition record(Surcharge)also and in Condition technique I have checked every thing is correct .
please find below I have attached the Screen short .
Please give me solution Asap.Hi Sukdev,
Have you checked the respective pricing procedure for From and To reference step maintained against the condition type ZSUR?
Regards,
T.R.S.Praveen -
Delivery proposal not possiblre in sales order atp check screen
Hi Gurus,
The system is giving a messsage saying delivery proposal not possible in sales order atp screen and i'm able to save teh sales order but it doesnot show up in MD04. I want the sales orrder to show up in MD04.
PLesae help
Thanks
AnushaHi,
Now you have to provide additional information about your scenario;
1) Is it a new material created that gives this problem?
2) Did you create any new MRP type or schedule line category?
3) When you say some materials-sales order is not seen in MD04 and some seen in MD04. Is there any any difference between the materials like in types, MRP views etc?
From SPRO side,
You also need to check the transfer of requirement settings in t.code OVZ1 for what requirement type assigned to your MRP type and item category. Also check the properties of the requirement type in t.code OVZH what req.class is assigned to the req.type.
Check the property of the req.class in t.code OVZG (aval.check and TOR must be checked at req. class level)
You may also need to check in t.code OPSS on the strategy (which is assigned in the material master MRP view3) on whether TOR and availability check has been activated or not.
If all are OK, then run the report which is mentioned in the earlier response.
Regards -
Project Revenue Plan Not Update from Sales Order Item
I am generating a network and project from the sales order item using Assembly processing. I am using milestone billing on the sales order item and the milestones attached to the project network activities are appearing as billing blocks on the sales order item billing plan. However, the project revenue is not getting updated from the sales order billing plan. Can someone please help?
I have deleted the billing plan on the billing WBS element and activated revenue planning update from sales order in cusomization for PS. I am looking at CNS41 under the project revenue sched in version 0. Is there a different report I should be looking at?
Regards,
Venkat.HI Venkat,
You are looking at the correct report & I believe you have also done the necessary customization. If you create a sales order and reference it to a quotation, the related plan values in the WBS element are refreshed automatically.
When the payment data is recorded, the terms of payment and the customer payment history are taken into consideration. One of the probable causes could be the credit limit of the customer might have been exceeded. Take help of your SD consultant & increase the credit limit for that customer (from the sales document), t-code FD32 if it is permitted in the business.
After the new credit limit is set execute the following steps:
u2022 Go to the t-code Change billing request (VA02)
u2022 Open the required billing request
u2022 Remove the account assignment of WBS element from each line item
u2022 Save the billing request
u2022 Reopen the billing request in change mode
u2022 Reassign the WBS elements to all line items
u2022 Now the changed credit limit will take affect
u2022 Check the Planned Revenue for the said project in CNS41, it should get updated.
Rgds
Deepak -
Statistic condition values not updated during Sales order Settlement
Hi,
In our client we have different Price condition types for based on scenario wise. Ex: Domestic Sales (ZPR1) and Export Sales ZPR2. I have maintained separately value fields for each price condition types.
We are booking some financial charges, and interest on working capital etc., this cost we need to transfer to COPA each Material wise based on sales revenue.
For this purpose we have created one COPA Assessment Cycle. Tracing factor is Sales Revenue and receiver is Materials.
In COPA Assessment cycle we can give only one base means ZPR1 related value field or ZPR2 related value field.
For this reason we have created one new statistic condition type, what is amount there in ZPR1 that amount will updated automatically in statistic condition place and so that we can give once one trance factor in COPA Assessment Cycle. We have assign this statistic condition all pricing procedure
Now my problem is in MTS scenario statistic condition values updated correctly. But in MTO scenario sales order settlement time statistic condition values not updated.
So is it possible update during sales order settlement time statistic condition values.
Please give me suggestion.
Regards,
ThiruHi Ajay Sir,
As you said is correct.
But in our client we have around 9 Plants and each plant manufacturing product are different. Client Requirement is in COPA Report they need see each product wise sales revenue. In this way we mapped product wise value field. System already mapped one guy in this way earlier. Now I am doing some changes for relevant to month end activities.
Some financial changes transfer to COPA each plant wise on Material. Here sender is cost center and receiver is Material. Base is Sales Revenue.
Please suggest me is there any alternative.
Regards,
Thirumalesh . -
Not Updating Open Sales Orders Value for CreditManagement
Hi Frendz,
This is the first time am implementing creditmanagement in my system tested simple credit limit check working fine.
Now testing Static and Dynamic(Automatic) it also working fine but Its not caliculating open sales orders value either static or dynamic while Creating s.o, settings made clicked on open s.o, i have already created sales orders value of 10th.
EX:- customer balance is 2lacs, credit limit is 1lac while creating s.o it always showing balance 1lac only(Instead of 1lac10th) with open sales order value is 10th.
Let me know Where i have missd settings.
Hari Prasadhello,
it is maintained against the cr control area in ent structure.
one needs to change there.
r u in prd system or development?
becoz if prd, then this change will effect a lot of ongoing docs.
rgs,
AK -
Price Update on Sales Order - After partial delivery and invoice
Hi all,
I have created a sales order of 10 tons and a despatch advice of 5 tons and invoice of 5 tons. Now when i want to update price on sales order then system give me "Update" button in grey.
My client wants to update price on those sales orders too which are partially despatched. Is that possible to do this in SAP? If yes then how?
Please respond.
Best Regards,
AI.Hi
I can suggest 2 alternatives .
!.Create a debit memo request sothat prices can be updated along with other details and changes can be tracked.
For voluminous data you can create a BAPI for Sales order creation and give related paramenters.
2. Create a BDC and update pricies for all partially processed sales order in KONV table using KNUMV .
This a bit tricky ,as there are chances of dumps and sensetive data becomes unstable ,also when you change by updating condition ,you dont get earlier prices and change is not controlled and almost irreversible.
I suggest first approach ,with better tracking , analysis and less disturbance to standard system.
Check business object Sales Order
Function module : BAPI_SALESORDER_CREATEFROMDAT1
You can take help of ABAP developer for creating BAPI.
I hope this helps
Regards
Mandar -
Financial Document not updated with Sale Order Number
Hello,
I wish to update the Financial document posting from the billing document with the Sales order and line item number against the revenue account.
This is not populating in COBL-KDAUF.
I have seen some other messages concerning this, but none with answers.
Is this possible, I assume it is.
If so, are there any other necessary settings?
We are not using CO-PA, and I can get the reference number & /or allocation field to populate with the sales order number but not line item. But I want the coding block filled so that BSEG VBEL2 is populated.Hi Roger,
In the situation that you have a 1:1 relation this is possible with a substitution and look then to the order in the first line from the invoice.
Where you can have a look to is the sumarization in FI and CO. TC OBCY for VBAK and VBRK.
Example:
When you have 2000 posting lines in an invoice the system can create 1 posting line by used G/L account
With this transaction you can set-up that there is create one posting line by:
(G/L account)
Sales order number
You have first to look how your set up is. (perhaps when this is set-up correct you have already the order number in the field).
Paul -
Delivery Block being Removed in Sales Order
Hello,
While Creating a Sales Order, the moment we enter the Sales Order Entry initial Screen, the Delivery block is being set to a Default Value. However, when I enter the Sold-To,Ship-To, Material, Quantity & Plant and press enter, it disappears. But the Functional Requirement is that it should remain the same even after pressing enter. Can some one give me an idea as to how to achieve it?
Thanks and Regards,
Venkata Phani Prasad KonduriHello,
In fact there are no Checks / Validations in any of the User-Exits for Sales Order. I think it has something to do with Config which is setting the Delivery Block automatically for some of the Order Types and I want to know which would be the appropriate place to restore the Delivery Block after the Enter is pressed. Is there a BADI for Sales Order? Or do I need to do the check in USER_EXIT_MOVE_FIELD_TO_VBAK? Please let me know.
Thanks and Regards,
Venkata Phani Prasad Konduri -
Variant Configuration not updated in Sales Order
We've added new variant configuration and used an ECN with a current date; and the configuration does show up in the similator CU50; however, in the sales order, using this same ECN date or even tomorrow it will not pull in. If you use the following Monday as the requested delivery day, the new configuration will update. Does anyone have experience with this date delay?
Thank you,
Laurie
Global Electric MotorcarsIn a Sales document, VC will use the BOM_Explosion date (STDAT ?) I'm going from memory here. Look for OSS notes, 'cuz it "depends" on where it gets that date, wether its the Requested delivery date, or something else.
-
Letter of Credit value is not updated against Sales Order
Hi SAP Gurus,
I have created LC in VX11N. When I am assigning the LC in the item level while creating the sale order, in the LC master, the open value is still remaining the same. It is not getting adjusted against the sale order value.
For Ex: Against Rs. 1 lakh of LC of the Customer, we create a Sale Order of Total Value Rs.80,000/-. Then the remaining balance of Rs.20,000/- is not getting upadted in the Open Value field in the LC Master.
Also, in the sale order LC screen part, the tab Ret. beside pmt. guarantee form is remaining at 0%. It is not getting edited.
Plz suggest is this a configuration issue or SAP Standard doesn't support LC fully.
Regards
SubratHi SAP Gurus, I am also facing the same problem of open value of Letter of crdit not getting updated. Kindly solve this. It is very urgent.
Regards,
Anant Saraogi -
Configuration is not updating in sales order using function module SD_SALESDOCUMENT_CREATE
Hello Experts,
we are using SD_SALESDOCUMENT_CREATE function module to create sales order.
Sales order is creating successfully but the configuration for the items are not updating.
Could any one help me out on this ....we tried in different ways but couldn't ....
Here is the code....
*---Filling Configuration data
*--- Filling Configuration Reference Item / Instance
w_sales_cfgs_refinst-posex = w_items-itm_number.
w_sales_cfgs_refinst-config_id = '000001'.
w_sales_cfgs_refinst-inst_id = '00000001'.
APPEND w_sales_cfgs_refinst TO t_sales_cfgs_refinst.
CLEAR w_sales_cfgs_refinst.
*---Filling Configuration Reference Data SALES_CFGS_REF Table
w_sales_cfgs_ref-posex = w_items-itm_number.
w_sales_cfgs_ref-config_id = '000001'.
w_sales_cfgs_ref-sce = '1'.
w_sales_cfgs_ref-root_id = '00000001'.
w_sales_cfgs_ref-complete = 'T'.
w_sales_cfgs_ref-consistent = 'T'.
APPEND w_sales_cfgs_ref TO t_sales_cfgs_ref.
CLEAR w_sales_cfgs_ref.
*---Filling Configuration Instances SALES_CFGS_INST Table
w_sales_cfgs_inst-config_id = '000001'.
w_sales_cfgs_inst-inst_id = '00000001'.
w_sales_cfgs_inst-obj_type = 'MARA'.
w_sales_cfgs_inst-class_type = '001'.
w_sales_cfgs_inst-obj_key = w_sales_items_in-material.
w_sales_cfgs_inst-quantity = w_items-target_qty.
w_sales_cfgs_inst-quantity_unit = 'EA'.
w_sales_cfgs_inst-complete = 'T'.
w_sales_cfgs_inst-consistent = 'T'.
w_sales_cfgs_inst-OBJECT_GUID = 'T'.
w_sales_cfgs_inst-PERSIST_ID_TYPE = w_sales_items_in-material.
APPEND w_sales_cfgs_inst TO t_sales_cfgs_inst.
CLEAR w_sales_cfgs_inst.
*---Filling Configuration Characteristic Values SALES_CFGS_VALUE Table
LOOP AT w_items-itm_config INTO wa_itm_config.
w_sales_cfgs_value_in-config_id = '000001'.
w_sales_cfgs_value_in-inst_id = '00000001'.
w_sales_cfgs_value_in-charc = wa_itm_config-charc_name.
w_sales_cfgs_value_in-value = wa_itm_config-charc_value.
APPEND w_sales_cfgs_value_in TO t_sales_cfgs_value.
*---Filling Configuration Variant Condition Key SALES_CFGS_VK
w_sales_cfgs_vk-config_id = '000001'.
w_sales_cfgs_vk-inst_id = '00000001'.
w_sales_cfgs_vk-vkey = wa_itm_config-charc_name.
APPEND w_sales_cfgs_vk TO t_sales_cfgs_vk.
CLEAR : w_sales_cfgs_value_in,w_sales_cfgs_vk.
ENDLOOP.
Regards,
Harsha PHello All,
Actually there was a bug in my code to update configuration for an item in sales order
Below is my Updated Code with that i can updated configuration successfully....
*---Filling Configuration data
*---Filling Configuration Reference Data SALES_CFGS_REF Table
w_sales_cfgs_ref-posex = w_items-itm_number.
w_sales_cfgs_ref-config_id = '000001'.
w_sales_cfgs_ref-sce = '1'.
w_sales_cfgs_ref-root_id = '00000001'.
w_sales_cfgs_ref-complete = 'T'.
w_sales_cfgs_ref-consistent = 'T'.
APPEND w_sales_cfgs_ref TO t_sales_cfgs_ref.
CLEAR w_sales_cfgs_ref.
*---Filling Configuration Instances SALES_CFGS_INST Table
w_sales_cfgs_inst-config_id = '000001'.
w_sales_cfgs_inst-inst_id = '00000001'.
w_sales_cfgs_inst-obj_type = 'MARA'.
w_sales_cfgs_inst-class_type = '300'.
w_sales_cfgs_inst-obj_key = w_sales_items_in-material.
w_sales_cfgs_inst-quantity = w_items-target_qty.
w_sales_cfgs_inst-quantity_unit = 'EA'.
w_sales_cfgs_inst-complete = 'T'.
w_sales_cfgs_inst-consistent = 'T'.
w_sales_cfgs_inst-object_guid = w_sales_items_in-material.
w_sales_cfgs_inst-persist_id_type = 'G'.
APPEND w_sales_cfgs_inst TO t_sales_cfgs_inst.
CLEAR w_sales_cfgs_inst.
*---Filling Configuration Characteristic Values SALES_CFGS_VALUE Table
LOOP AT w_items-itm_config INTO wa_itm_config.
w_sales_cfgs_value_in-config_id = '000001'.
w_sales_cfgs_value_in-inst_id = '00000001'.
w_sales_cfgs_value_in-charc = wa_itm_config-charc_name.
w_sales_cfgs_value_in-value = wa_itm_config-charc_value.
APPEND w_sales_cfgs_value_in TO t_sales_cfgs_value.
*---Filling Configuration Variant Condition Key SALES_CFGS_VK
w_sales_cfgs_vk-config_id = '000001'.
w_sales_cfgs_vk-inst_id = '00000001'.
w_sales_cfgs_vk-vkey = wa_itm_config-charc_name.
APPEND w_sales_cfgs_vk TO t_sales_cfgs_vk.
CLEAR : w_sales_cfgs_value_in,w_sales_cfgs_vk.
ENDLOOP.
CLEAR : w_sales_items_in,wa_mara,w_items,w_sales_schedules_in,
w_items-itm_number.
ENDLOOP.
Cheers,
Harsha -
Ztable not updating in sales order user exit
Hi Genius Abapers.
We want to take text ID data of sales order into Ztable. For taking the data we have used user exit in sales order. Now the problem is if we go through debug mode then the Ztable is updating but if we remove the break point Ztable is not getting updated.
Please give solution for this problem
Regards
NarayanaHi Gurus,
I am basically from SD and we used commit statements in the programme and this is the code we used
Include name --- MV45AF0B_BELEG_INITIALISIEREN
**********************************Code Addd by paresh 8.10.2007 starts *******************************
DATA : BEGIN OF itab_so OCCURS 0,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
spras LIKE t002t-spras,
END OF itab_so.
DATA : BEGIN OF itab_so1 OCCURS 0,
vbeln LIKE vbap-vbeln,
posnr LIKE vbap-posnr,
spras LIKE t002t-spras,
END OF itab_so1.
DATA : BEGIN OF it_tabid OCCURS 0,
tdid LIKE stxh-tdid,
tdspras like stxh-tdspras,
END OF it_tabid.
DATA : is_stxh TYPE stxh.
DATA g_header TYPE string .
DATA wa_plain_text TYPE zplain_text.
DATA t_lines LIKE tline OCCURS 0 WITH HEADER LINE.
DATA g_item(16)." type i.
data :it_ztable type table of ZPLAIN_TEXT .
data wa_ztable type zplain_text.
data flag.
*****************************Read Header text***************************************
*loop at vbak.
itab_so1-vbeln = vbak-vbeln.
itab_so1-posnr = vbak-posnr.
itab_so1-spras = vbak-wklnd.
APPEND itab_so1.
CLEAR itab_so1.
ENDLOOP.
refresh it_tabid.
clear it_tabid.
refresh it_ztable.
clear it_ztable.
LOOP AT xvbap.
itab_so-vbeln = vbak-vbeln.
itab_so-posnr = xvbap-posnr.
itab_so-spras = xvbap-wklnd.
APPEND itab_so.
CLEAR itab_so.
ENDLOOP.
LOOP AT itab_so.
SELECT tdid tdspras FROM stxh INTO TABLE it_tabid WHERE tdobject = 'VBBK' AND tdname = vbak-vbeln .
ENDLOOP.
*loop at it_ztable into wa_ztable.
LOOP AT itab_so.
LOOP AT it_tabid.
is_stxh-tdobject = 'VBBK'.
is_stxh-tdname = vbak-vbeln.
is_stxh-tdid = it_tabid-tdid.
is_stxh-tdspras = it_tabid-tdspras.
CALL FUNCTION 'READ_TEXT'
EXPORTING
id = is_stxh-tdid
language = is_stxh-tdspras
name = is_stxh-tdname
object = is_stxh-tdobject
TABLES
lines = t_lines
EXCEPTIONS
id = 1
language = 2
name = 3
not_found = 4
object = 5
reference_check = 6
wrong_access_to_archive = 7
OTHERS = 8.
IF sy-subrc = 0.
LOOP AT t_lines.
CONCATENATE g_header t_lines-tdline INTO g_header SEPARATED BY space.
ENDLOOP.
wa_plain_text-application = 'SO'.
wa_plain_text-key1 = itab_so-vbeln.
wa_plain_text-key1 = vbak-vbeln.
wa_plain_text-key2 = 'HDR'.
wa_plain_text-sub_application = it_tabid-tdid.
wa_plain_text-text = g_header.
wa_plain_text-last_date = sy-datum.
MODIFY zplain_text FROM wa_plain_text .
wait up to 60 seconds.
commit work.
CLEAR: wa_plain_text.
CLEAR : g_header,t_lines.
refresh t_lines.
ENDIF.
if sy-subrc <> 0.
delete from zplain_text where key1 = vbak-vbeln and
key2 = itab_so-posnr and
SUB_APPLICATION = it_tabid-tdid.
commit work.
endif.
ENDLOOP.
ENDLOOP.
*endloop.
Please do me the needfull
Regards
Manam.Narayana -
Remainder amount of contract not updated in sales order
I have a value contract with orders on it. However, when I create a new sales order on this contract, the amount which appears is the contract value instead of the remaining amount.
Could you please let me know how to have the remaining amount of the contract appear in new sales and not the total amount of the contract item.
Thanks,Hello,
Update Document Flow option is available only at Item Level in copy control setting from Contract to Sales Order.
Check out your Copy Control Records at Item Level. There would be "2" mentioned in "pdate document flow" box.
2 means Create doc. flow records except for dely/goods issue/billdoc. Here you to maintain "X" for Complete Document flow.
Hope this helps,
Thanks,
Jignesh Mehta
Maybe you are looking for
-
I began this crazy fiasco on Friday (it's now Monday). My phone didn't have enough storage to update to iOS8 via wifi, so I connected to my laptop. Thankfully I backed up my phone to iCloud & even saved pics manually onto my laptop before beginning
-
I recently formatted the hard drive to do a fresh install of Mavericks on my Macbook Pro Retina. I then formatted my Western Digital 2 TB External Hard Drive for Time Machine. I then began storing others files and folders on the external hard drive a
-
When I open the application the following alert appears: "Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory." There is a solution on the support site but on
-
Hi All, I have a SFTP to SFTP scenario where file is getting picked up from the source location and failing at the taget side. When tested with File to SFTP the same channel is able tp place file sucessfully. However when scena
-
Script for user setup in Discoverer
Do anyone have a script that I can use to scan a table or spreadsheet with User names and Business areas and setup the users in Discoverer. I need to setup lot of users in Discoverer and manually doing them is a time taking process. Thanks in advance