"Delivery Completed" Indicator in Goods Receipt

Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
Currently we are not able to check the Delivery Completed Indicator as it is not in editable mode.
Is there any issue if we enable the Check Box on Goods Receipt Screen. If no, how can we enable the Check Box.
Please guide.
Regards,

Hi
This is handled by the system automatically. you can change only in purchase order.
Refer SAP note 1093582 for more info
About delivery completed indicator functionality
The purchase order item is considered closed, even though the total
quantity may not have been delivered.
o Although a further delivery is not expected, it is still possible.
o At the time of the next goods receipt, the system suggests the item
as unselected.
o The purchase order item can be deleted, even if the total quantity
was not delivered.
Although the "delivery completed" indicator is not set, a purchase order
item is still considered closed if the full quantity has been delivered. In
this case, the "delivery completed indicator" is not required.
In Customizing for Inventory Management/Goods Receipt/Set Delivery
Completed Indicator, you can define at plant level that the "delivery
completed indicator" is set automatically in the order if:
o the total quantity was delivered
o the underdelivery or overdelivery lies within the tolerances
Hope it helps
Thanks/karthik

Similar Messages

Delivery Completed Indicator under Goods Receipt tab in COR2 to be hidden

Dear All,
I want to hide Delivery Completed Indicator under Goods Receipt tab in COR2.
Is it possible with configuration?

you may try to create screen variant with tcode SHD0
there are many threads on how to use shd0

Good Receipt after Delivery Completion Indicator on

Dear ALL,
In our Client there is a setting that if Delivery indicator Tick is on then the system is allowing the Goods Receipt . I want that if Delv. indicator is on then System should not allow GR.
Please provide the Config setting.
Regards,
Kapil.

Hi
This is a standard functionality incase PO qty is 100 and you set delivery completed indicator when goods receipt done for 90.then system will still allow receipt of another 10 qty. but not more than that.i.e. total receipt can be 100 only.
But can use user exit to stop further goods receipt after delivery comple indicator is on.
Vishal....

"Delivery Completed" Indicator in Purchase Order

Hi,
While doing GR, we want to check the "Delivery Completed" on the Goods Receipt Screen if we are expecting no future receipt against the Purchase Order.
On SDN & SAP Note, I got to know that we canu2019t tick the "Delivery Completed" Check Box while doing Goods Receipt.
We have implemented the Release Strategy on the Purchase Order. To tick the "Delivery Completed" Check Box, we need to cancel the Release Strategy.
Is there any other way (T Codes) to achieve the same?
Regards,

Even you flag Delivery Completed" Indicator in Purchase Order, system still allows GRN for open Qty.
Use MEMASSPO trxn & Put Deletion indicator for the PO Line Item. So that you can not do GRN for the open Qty of PO line item.
Check
mass setting of delivery completed indicator

Delivery complete indicator set by partial goods receipt in kanban orders

HI Experts,
we recently upgraded to ECC 6 DIMP EP 6. Now for kanban production orders delivery complete indicator is set for partial goods receipt. Under delivery tolerance is zero. Is there any notes available for this issue. Manual production order goods receipt is fine.
THanks
RIjil

Hi,
Let me try and understand your scenario better. You have a production order triggered by KANBAN. You then do a GR via inventory management of a partial quantity. Would you then GR the remaining quantity?
The reason I ask is because this is KANBAN production, the bin being filled multiple times for the same trigger does not sound right. The system behavior of not expecting further deliveries (by setting delivery complete) seems appropriate.

Final Delivery indicator in Goods Receipt tab in Process Order

Hello Friends,
I have one doubt, thought to discuss with you.Whats the importance of Final delivery indicator in Process order.I know that if any further goods receipt is not accepted against the order than we should tick this indicator,because of which system sets the DLV status at order header level or if goods receipt qty against the order is equal to order qty than system automatically sets this indicator.
when we do the settlement of order than system looks either for TECO or DLV status of order , if its find there than system consider such orders for settlement.
Now my question is suppose i have done the Goods Receipt against the order less than the order qty, than system will set the PDLV Status against that order.Now no further goods receipt is expected against that order.Now i haven't set the Final delivery indicator in goods receipt tab in process order.But i have technically completed the order,because of which system has set the TECO status against that order.
Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
As far as i know, system allows us to do,but on this issue i have got different answers from different person.So bit confused.
Thanks and Regards,
Jitendra Chauhan
Edited by: jitendra chauhan on May 8, 2009 8:42 AM

Dear,
Will system allow me to settle such order?and viceversa, if order has DLV status at header level and no TECO status, than system will allow to settle such order?
Yes
If yes than whats the other use of Final Delivery indicator in process order?Is it important to set that indicator from settlement point of view only?
You need to Final confirm (CNF) the Order to get the DLV Status.
Or if the Delivery completed indicator is set in the Process Order, then also th System status will be DLV
If your order quantity10 and you produced 10 quantity it means that order is fully deliver then Final delivery will automatically be set.
The "delivery completed" indicator has the following effects:
o The item is regarded as closed, even if the total quantity was not delivered.
o A further delivery is not expected, may, however, arrive.
If status is DLV then it cannot be a WIP stage where the the good are posted to stock and production is completed
Please refer this thread fro DLV and TECO,
Re: order settlement
Regards,
R.Brahmankar

Delivery Completed Indicator - Open PO Quantity Issue

Hi All,
I have an issue relating to our Open Purchase Order Report. I have some POs which are appearing on the report eventhough they are marked, 'Delivery Complete' ie NOT open. The example of a PO is where the PO Quantity is 100 and the Goods Receipt is 99. The user knows that there will be no further deliveries and therefore marks the PO 'Delivery Complete'
In the Extractor to BI we have extracted this field ELIKZ 'Delivery Completed Indicator'. The structure of our datamodel is
PSA -> DSO (Write Optimised DSO) -> Cube
We calculate the Open PO Qty by taking 'PO Qty' minus 'Goods Receipt Quantity' I have checked the example PO in the cube & DSO. I can see that for the infoobject 'Delivery Complete Indicator' that it has been marked 'X' but only on the records relating to the Goods Receipt for this PO. The original PO record is added to the cube eg on 1st Jan and then the Goods Receipt record, including the delivery complete indicator is added to the cube on 31st Jan, but the original record is not updated by this indicator. Therefore at the moment I cannot use this to filter out records in my query. See below how it looks in the Cube;
Created Date - PO No - PO Line - Del Complete Indicator - PO QTy - Goods Receipt Qty
01.01.2011 123 10 (Blank) 100
31.01.2011 123 10 X 99
What should I do? How have you created this report?
Just to let you know I have already read the post Delivery Completed Indicator(ELIKZ:0COMPL_DEL) in 2LIS_02_SCL
Many thanks for your help,
Michelle

Hi Kalyan,
Thanks very much for your message,
In my case if the Order Qty is not equal to receipted this does not always mean that it is open. Sometimes the receipted quantity can be over or under (not equal) and the PO can be closed. What do you mean by confirmed quanity? Also, this is a Purchase Order report not a Sales report.
You have said...
"Then I would suggest to still keep the condition on the Net ord qty and Net confirmed qty and exclude the del compl indicator as X and also the status as open "
I don't understand how this will work. My issue is that the indicator is not on all the records of a PO only the receipted records.
Can you help again please?
Many thanks
Michelle

"delivery completed" indicator in GR

hi
I have created a PO for 100 nos.
I am now receiving 80 nos and then selecting the "delivery completed" indicator in GR screen for that PO.
Still system is allowing to receive remaining 20 nos .
How to prevent system once delivery completed indicator is set?
rgds
sara

Hi,
It is the correct system behaviour, It is programmed like this only and is standard system behavior.
As proposed by sap:
To stop the system from proposing a quantity in Transactions MB01 or MIGO and to prevent a GR posting, you can proceed as follows: ( choose any of these)
1. Reduce the purchase order quantity to the previous GR quantity.
2. Block the purchase order item.
(ME22N: Block pushbutton; ME22 Menu -> Edit -> Block)
3.Fill the date field for the 'Latest Possible Goods Receipt' (LEWED) in the purchase order item. If you do this and you enter a GR document after this date, the system issues message M7163, which you must set as an error message in Customizing.
I propose for the 3rd one.
Regards
Rajesh

Delivery completed indicator not working..

HI SAP expers,
some purchase orders not getting chick mark of Delivery completed indicator ater receiving goods
i have PO with 100 qty . then GR 100 qty . but its not taking in the purchas eorder
Delivery completed indicator not check automaticalley. i did all the configuration in spro-mm-inventory-GR-indi extt...
most of th ePO or getting but some POs or not getting.. is there any settings behind MATERIAL MASTER or any .?
Regards,
Anthyodaya.

Try the following config..
1. Set Delivery complete indicator at plat leve
spro - mm --inventory mgmt -
Goods receipt -
Set delivery complete indicator
2. COntrol field selection for MIGO to disable users from changing it.
spro --> Materials Mgmt --> Inventory Mgmt --> Settings for enjoy Transaction --> Field Selection for MIGO
set field : "Del.Completed" Ind. GOITEM-MIGO_ELIKZ to Display

Delivery completed" indicator cannot be set for item 00001

Hi all,
I have done a inter company stock transfer order , with respect to that Order I made Outbound delivery and posted GR with respect to outbound delivery. I have done MIRO for PO for all the Item ,
Now I need to return some material to supplying plant for some reason, I tried to make GR (MIGO) against the same outbound delivery with movement type 122. the document is posted but when I tried to make complete delivery indicator it does not allow me to do so .
it says me
Delivery completed" indicator cannot be set for item 00001
   Message no. 06 848
Diagnosis
   You have set the "delivery completed" indicator for a stock transfer item.
system Response
   You can only set the "delivery completed" indicator in stock transfer items if
   o   the sum of the goods issue quantities in the supplying plant equal the sum of the goods receipt    quantities in the receiving plant.
   o   the sum of the delivery note quantities is equal to the sum of the goods receipt quantities.
Regards,
Dhilipan.

I dont think you need to set "delivery completed" indicatory while returning from one plant to another.
For example : You ordered 100 qty. and you are receving only 80 Qty. and you don't expect any receipts anymore. in this case you want to close the open purchase order with delivery completed indicator.
But while returning to vendor or to another plant you are not referring the P.O directly and hence you dont need "delivery completed indicator'

Delivery completed indicator is not tick on generic article

Hello Expert,
I create a normal purchase order with generic article and variants.
Then, I do goods receipt with full quantity.
Delivery completed indicator is automatic set 'X' on variant items.
But with generic article, Delivery completed indicator is not set 'X'.
Do I miss any configuration ?
Please help me !
Regards,
Minh

Hi Minh,
as far as I know, this is a normal system behaviour and not an error or missing configuration.
The generic article in the goods receipt has a statistical character. No goods receipt can take place for the generic article. The goods receipt only takes place for the variants of the generic article and so the delivery completed indicator only gets set for the variants and not for the generic article.
Hope it helps.
Regards
Tobias

Delivery completed indicator for STO cannot be set!

Dear colleagues,
There are number of STO’s those goods issue quantity > quantity of goods received. Because of this delivery completed indicator cannot be set due to message “06 848 - Delivery completed indicator cannot be set for item XXXXX”.
There is an OSS note (167795) that allows to set delivery completed indicator for such purchase orders. Even though our SAP release is 6.04, report RM06EV70 does not exist (yet BADI ME_ARCHIVE_ACTIVE is active) in the system and OSS note cannot be implemented.
Any help would be appreciated.
Regards,
Melih
PS. Please do not provide answers like “the goods receipt must be first posted via the entire goods issue quantity; then you can post a scrapping via the shortfall quantity” since there are backdated STO’s.

Hi,
Find STO created for which plant in t.code:ME23N and check MRP parameter maintained for that plant in t.code:OPPQ( also check entry of that plant in t.code: OMCD).
Also cross check which Field Selection Key assigned to your STO PO document type and check “Delivery completed" indicator” available as Optional entry in GR/IR control segment in your Field Selection Key.
SPRO - > MM - > Purchasing -> Define Screen Layout at Document Level
Regards,
Biju K

PO delivery completed indicator

Hi All
I notice that some of my po shows the DCI ticked once the delivery gets completed.but some don't get ticked even the delivery gets completed.Whats missing here?Your input will be appreciated.

Hi ,
From your message it seems that the automatic DCI is not set for all the cases.Please check if it so happens for some specific Plant .If so check whether auto DCI is not ticked against that specific Plant .For this go to Spro-MM-Inventory Management & Physical Inventory- Goods Receipt- Set Delivery Completed Indicator . Here check whether all Plants are checked or not.
Dhruba

What is the pre-requisite of getting delivery completed indicator in PO

Hi ,
I we have done complete GR against a PO item still delevery completion indicator is not set for this material in PO,
Is there any other condition to be fulfllled to get this indicator?
we don not have any over delivery tolerance .
Thanks in Advance
Anand

Hi,
Based on the under delivery tolerence ( if set ) or if Receipt Qty = your ordered qty then system will set Deleviery completed indicator.
Before that please check in config, whether to automaticlly set delivery completed indicator is activated. ( below given the path )
IMG-Material Management-Inventory management and Physical Inventory-Goods Receipt- Set Delviery completed Indicator
Regards
Rewrard Points if useful

GR possible despite Delivery completed indicator in PO

Dear All,
We have PO created for 100Kg, now we have received 80kg and no further deliveries are expected and we want to close this PO line item.
We are selecting Delivery Completed Indicator after making GR for 80Kg. But Still we can make a GR posting in MIGO for this PO line item.
Can someone suggest me on short closing of this PO line item.
Thanks
Uday

Hello.
This is standard behavior of the system, You can refer SAP Note# 856279.
According to this we have three possible solutions
1.Reduce the purchase order quantity to the previous GR quantity.
2. Block the purchase order item.
     (ME22N: Block pushbutton; ME22 Menu -> Edit -> Block)
3. Fill the date field for the 'Latest Possible Goods Receipt' (LEWED)
     in the purchase order item. If you do this and you enter a GR
     document after this date, the system issues message M7163, which
     you must set as an error message in Customizing.
But I would suggest to go with 3rd option because of below issues.
With 1st option, if we reduce the PO qty to, PR will become Open again.
with 2nd option, system will not allow invoice verification for blocked line item.
With reagrds
VB

"Delivery Completed" Indicator in Goods Receipt

Similar Messages

Maybe you are looking for