Delivery Document is closed-Solution required to manage transaction!

Dear All,
What could be  the best solution for....
"A delivery document has been added from a standalone return document and status is closed,Now customer wants to add an invoice for closed delivery and skipping outgoing invoice"
Pls suggest me,how to manage this out of procedure transaction in SAP B1.
Thanks....

Hi Param,
SAP B1 is quite restrictive in the case of closed documents. What you can do is create a delivery note exactly same as the one which is closed. In the remarks field/or any other suitable field add the 'closed delivery note' document number to maintain the traceability. Create the invoice exactly the one you were going to for 'closed delivery note'.
Hope this helps.
Regards,
IC

Similar Messages

  • Urgently required Good Installation Document for SAP Solution Manager 4.0

    Hello Experts,
    Iam implementing /installing SAP Solution Manager 4.0 in our scenario in a day/two. My query is tat do we need to install it APAP + JAVA based only or can we install it ABAP based only?
    Secondly i needed good self prepared document for SAP Solution Manager 4.0 installation which gives me step wise step procedure in detail.Plz dont give service marketplace link as i hv already seen and checked installion guide over it ,act. i wanted self prepared doc which is of more use. The useful answers shall be surely awarded points. Requested to revert at earliest as i need this guide in a day itself.
    My Email Id is [email protected] .
    Regards,
    Saumya

    Hey Somya,
    Can u plz send me the configuration guide of change request management that Rakesh had sent to you..
    My Email-id is [email protected]
    Plz its urgent, let me know if u want me to open a new thread so that i can reward you with points..
    Tnx in advance.

  • Credit Management of Delivery Documents

    Dear Experts ,
    We all Know in the credit management of the Order :OVAK
    *We can define what type of credit check we are doing either automatic or simple. *
    But in the Delivery Document : Where do we define the type of credit check in Customizing:
    T-code: OVAD
    We only define the Delivery Credit Group and PGI Cre GRP.
    However I can Understand that in OVA8 we have the credit group to determine the Credit mangement controls:
    But *We can define what type of credit check we are doing either automatic or simple. *
    please explain,
    A S

    Hi,
    My understading is simple credit check is performed in delivery documents and the reason why I am saying this is b'coz of below statement:
    > When you define automatic credit checks, you can also freely define requirements which cause a document or the forwarding of the material requirements to MRP to be blocked
    Now, requirements are tranferred to MRP in sales order stage not at delivery stage as far as I know.. which means simple credit check is performed at delivery level as there are no additional things which can be performed during simple credit check compaired to automatic credit check {which occurs normally in sales order stage}
    Other elite members may elaborate more on this if somewhere my understading is wrong..
    Hrishi

  • Lotus Notes documents migration into Solution Manager

    We have been using Lotus notes application for maintaining only documentation in our landscape. But now, the plan is to move all the documentation from Lotus notes to SAP Solution Manager and use it as a document management system from now....
    Could anyone please answer the following queries:
    1) Does LSX environment help/enhance the migration ?. If not, are there any tools/accelerators/functions/automatic methods for mas uploading?
    2) This documentation is not project specific documentation. Where do you think this must go in Solution Manager?
    In the custom area of BPR?. If yes, please do let me know the procedure for the same.
    3) Would it be possible to link the documents to functional domains/ business scenarios/ business processes in the BPR?
    4) Lotus notes provides access to all the versions (Draft/Approved/Reviewed) of a document. Would it be possible to have the same features even in Solution Manager?
    5) What all document types does Solution Manager recognize?.
    I think the Lotus notes documents can be converted to 'Word' format and then put in Solution Manager. Besides this, is there any other common format which is recognized by both the tools?
    6) Standard SAP Solution manager does not provide indexed search. So, in order to retrieve a document later what indexing nomenclature/guidelines do you recommend?
    Has anyone done/faced with this kind of requirement. The idea now is to use Solution manager as a document management system. The efforts/process/timelines information if already known would be of great help to start with for us....
    Could you also provide the trade offs b/n Solution Manager and SAP knowledge warehouse (KW)?
    Hoping for some replies ...

    we also had the same requirement to migration from LN to SolMan Documentation base but there is no such tool (yet?)
    What you can do you can migrate from any ARIS like platform to SolMan:
    http://en.sap.info/ids-scheer-announces-migration-program-to-aris-platform/4058
    You do have versioning in SolMan and you can upload any kind of document via SOLAR01
    regarding the indexing you can either use SAP SES or connect TREX, this is documented in the customizing (SPRO)
    TREX will also be the prerequisite to make use of KM in SolMan
    nesimi

  • Link one solution manager word document into another solution manager HTML

    Hi,
    I have requirement in solution manager that there are two documents uploaded into solution manager.
    1. One word document in one of the project folder
    2. HTML page in another folder of same project
    I have to set up a hyper link of word document in the HTML web page.
    If anyone has gone through this type of requirement, please let me know the details of how did you set up the link between word and HTML document.
    Appreciate the early response.
    Thanks,
    Siva

    Go to the properties of the file you want to link your word document to. (attributes icon)
    There you will find a button "Generate Document URL (F9)". Clicking this button will buffer the URL into clipboard.
    Then you open your Word document in edit mode and paste the URL there.
    source: Inserting a document into another in Solution Manager

  • Delivery Document not getting closed

    Hi Experts,
    I am using 2007 B PL 08. I want to close the delivery document through SDK against which no Invoice or return is booked. it gives me error 'Internal error -5002 occured' when I try to close this document with following code.
    Dim fd As SAPbobsCOM.Documents
      fd = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes)
             If fd.GetByKey(93) = True Then
                    DelClose = fd.Close
                    If DelClose <> 0 Then
                        oCompany.GetLastError(FErrCode, FErrMsg)
                        MsgBox(FErrMsg)
                    End If
              End If
    i even try following code to loop through the lines collection and close lines instead of closing header.
    it gives me "you can not close rows in this type of document" error:
    Dim fd As SAPbobsCOM.Documents
                fd = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDeliveryNotes)
                If fd.GetByKey(93) = True Then
                    For i = 0 To fd.Lines.Count - 1
                        fd.Lines.SetCurrentLine(i)
                        If fd.Lines.LineStatus <> SAPbobsCOM.BoStatus.bost_Close Then
                            fd.Lines.LineStatus = SAPbobsCOM.BoStatus.bost_Close
                        End If
                    Next
                    DelClose = fd.Update
                    If DelClose <> 0 Then
                        oCompany.GetLastError(FErrCode, FErrMsg)
                        MsgBox(FErrMsg)
                    End If
                End If
    this used to work with 2005 B. Am I doing anything wrong?
    Thanks in advance,
    Binita

    Hi Binita,
    Closing the delivery at the header level works in the DI API in SBO 2007A (though it's not good practice as the correct method, as you know, would be to add a return linked to the delivery to return the goods to stock and update the GL). I can also do this via the SBO client (it warns me that there is no target document but I can choose to continue).
    If you can close the delivery via the SBO client in 2007B then it sounds like a bug in the DI API.
    Kind Regards,
    Owen

  • Adding Item managed by serial no.s to Delivery Document

    Hello Experts,
    Can you please help me in the following?
    I'll appreciate your help.
    I want to add items managed by Serial Number to delivery document (using DI API).
    We have a set of internal serial numbers to be used for those items.
    For E.g, we have to add an item with code A0001, quantity of 2, with internal serial numbers to be used 00080,00090
    to the delivery document.
    (We allow the user to specify the internal serial numbers to be used).
    I'm not sure how to get the system serial number for this item.
    I believe OSRI has the Serial No/Internal serial no. for each item, w.r.t the marketing documents. (Is each item has its own set of system serial nos & internal serial no.s? From where we need to take it?)
    Can you please post if you have any sample code?
    (If possible, can you please explain me the relationship between OSRI and marketing documents, and oitem)
    Thanks a lot.
    Regards,
    Geetha
    Code that I'm using:
    Private Function UpdateSerialNumbers(ByRef objSerialNumbers As SAPbobsCOM.SerialNumbers, ByVal strShpReqNm As String, ByVal strShpReqRw As String) As Boolean
    'Get the values of Internal Serial numbers from our table, into this RS.
    If objRS.RecordCount > 0 Then
    objRS.MoveFirst()
    Dim i As Integer
    If objSerialNumbers.Count <= 0 Then SerialNumbers.Add()
    For i = 0 To objRS.RecordCount - 1
      Dim strTmp As String
      strTmp = objRS.Fields.Item(0).Value() & ""
      objSerialNumbers.SetCurrentLine(i)
      objSerialNumbers.InternalSerialNumber = strTmp 'e.g 00080
    'Need your help in this step
      objSerialNumbers.SystemSerialNumber =     objCommon.GetNextKeyValue("OSRI", "SysSerial")
      objRS.MoveNext()
      If Not objRS.EoF Then
        SerialNumbers.Add()
      End If
    Next
    End If
    End If
    return true
    End Function
    Function CallingFn() as boolean
    UpdateSerialNumbers(objDLDoc.Lines.SerialNumbers, objHeaderInfo.ShipReqNum, strTmp)
    objDLDoc.Add
    End Function

    Geetha,
    let me explain you shortly how the serial data is stored in the database
    OSRI - Serial Numer for Items
    SRI1 - Serial No. Trans. for Item
    OSRI and SRI1 are "connected" by SysSerial
    SRI1 is connected to the Document Tables Lines (INV1, DLN1, ...)
    with BaseType, BaseNum and BaseLinNum to the Document
    a Serial Number is Unique - 1 SerialNr = 1 Quantity (thats the difference to Batches)
    regards
    David

  • Office 2007 Document Attaching in Solution Manager

    Dear Gurus,
    When document attaching in Solution Manager 7.01, the system does not support Microsoft Office 2007 formats. (docx, xlsx) Are there any customizing for this topic?
    Thank you,

    Hi,
    Thanks, in lieu with your detailed system message, please try with this
    The warning is because the file extension docx is not known for the
    system. All the known extension is defined in table SDOKMIME by standard
    . And customer can extend it in table SDOKMIME_C.
    Actually that is only a warning message, which will not block the
    following up processing. The docx file will be attached if you click on
    the green tick. And the file can be previewed and checked later on.
    If you would like to get rid of this warning anyway, you may extend the
    customer table using the following step:
    -spro->SAP Customizing Implementation Guide
    ->SAP NetWeaver->Knowledge Management
    ->Settings in the Knowledge Warehouse System
    ->Document Management Service
    ->Define MIME Type for File Name Extension
    -add an entry like
    File name extension = docx
    MIME type of a Web object = application/vnd.openxmlformats
    After everything has been done as above, please retry to attach, it should help.
    Cheers,
    sh

  • Delivery Document closing -5002

    Hi,
    I am closing my delivery document and the document doesn’t close with item with serial number; I get error -5002 and the document doesn’t close.
    Is there a special routine to close a delivery document with items with serial number?
    Thank you,
    Rune

    hi Rune,
    there's only one way to close a document
    the .Close Methode
    odocument.close
    there's no special way with serial numbers

  • Adding existing RWD uPerform documents using SAP Solution Manager Adapter?

    Note# 1468552
    Cannot add existing RWD uPerform documents using the SAP Solution Manager Adapter.
    Currently, a user can only create a new document with the Solution Manager Adapter; there is no
    ability to add existing uPerform documents that have already been created.
    RWD has submitted an enhancement to SAP requesting this functionality.
    Hi All,
    Has there has been any update on the functionality to add existing RWD uPerform documents to Solution Manager? I have found a note from 2010 stating that this functionality has been submitted as a enhancement. My question is, has this feature been implemented yet? If not, does anyone have any suggested work-arounds for this issue?
    Thanks in advance!
    Stephanie

    Hi Stephanie,
    I can't find much information on this topic.
    You could create a message in component SV-SMG-SPA.
    Regards,
    Matthew

  • How to find closing date for a delivery document

    I nedd to fin closing date for a delivery document. I tried with clsdate but didnt work
    If someone can help me with this

    Hi.............
                 Better and simplest way you can get it through a simple qury report. Create a query by joining two tables ODLN and OINV. OINV's docdate means the closing date of delivery challan.
    Regards,

  • How to update packing list inform to an outbound delivery document

    Hi all Experts,
    I meet with an tough requirements, Is there any solution fuction can use to generate packing to a outbound delivery document?
    PLease kindly advice, thanks!
    Regards,
    wei-guo

    Hi,
    I did a little test and, within the method CHANGE_DELIVERY_ITEM, itu2019s possible to fill the picking quantity (structure CS_LIPSD) but unfortunately during the save the added information is lost.
    This is because the BAdI method is fired too soon and the routine PICKMENGE_BEARBEITEN (SAPFV50P) is not called at all.
    The problem is quite complex; even after changing the picking quantities, the picking status still remains open!
    The picked quantity is generally filled:
    u2022     by printing the picking list
    u2022     Warehouse Management by creating a transfer order
    u2022     or by manual entry
    Otherwise, it is assumed that picking has not yet been initiated and the result is that picked quantity is ignored.
    In my opinion itu2019s very difficult to solve your problem using only the BAdI implementation.
    I suggest you to propose an alternative solution such as the automatic processing of Picking Output EK00; easy to activate and absolutely standard!!!!!!
    Regards,
    Andrea

  • Cancellation of Delivery Document

    Hi everyone,
    I would like to ask if there is a way to correct a posted Delivery document without having to re-create the reference Sales Order document. Here's the scenario: Upon creation of a Delivery document, the user has forgot to change the delivery quantity before posting it. (human error)
    Example:
    Sales Order Qty = 10
    Delivery Qty = 8 (Partial Delivery)
    The Delivery Document has been posted in B1 with 10 as the quantity. If we try to create a Return Document for the 2 quantity which was not served, we cannot anymore create a new Delivery Document for the remaining 2 because the reference Sales Order document is already closed. Is there a way we can serve the remaining 2 without having  to create a new Sales Order and just used the same Sales Order? Any suggestions will be appreaciated (either thru SDK or thru a workaround)
    Thanks in advance.
    Malu

    Hi Malu,
    There is no workaround either you make a return of 2 and again delivered 2 directly or return 10 and create a new sales order of 10 quantity a better option will be to return 10 and create new sales order.
    I hope SAP will come up with solution on this as these is a commen scenerio required.
    Thanks
    Kamlesh

  • Delivery document is still open even already invoiced

    Good day! Could anyone help me on this?
    Here is the scenario:
    A new delivery document was created based in sales order. The delivery undergoes to approval procedure and then approved.
    Upon posting of the delivery doc and after past few days, sales return was requested. So, sales return was processed and successfully posted based in that delivery doc, but later that day another sales return was requested and did same procedure (successful).
    Two sales return was created based in that delivery doc and both SR were 'closed' while the delivery doc is still open, now to close that DR an invoice doc is required. Invoice was made base again in that DR and successfully posted. Expectedly, the DR should close but apparently it doesn't close. Why is that? Or did I miss something that would close that DR?
    Thanks in advance!

    Hi Nagesh,
    Yes your right, all marketing docs undergone with approval procedure are all saved as Draft until it was approved by the approver and then posted by the originator and that is the only time DR or any marketing docs should be called as official/posted transaction.
    Going back to my scenario, what I mentioned was approved and posted meaning the transaction was officially saved and undergone with the normal module flow SO->DR->SR->SI.
    And my concern was focused on why DR is still open even already invoiced.
    Correct me if I'm wrong, DR will still remain 'Open' only if the item total qty was not yet invoiced. For example:
    DR1              QTY            Amount
    Item 1             10              100
    SI
    Item 1              8                80
    Thanks,
    Rhod

  • Report on delivery document and item

    Hi experts,
    I have some report requirements where i need delivery document number and item in the report. I wanted to hear some opinions on how to model this, i mean, should i add document number and item to the cube (0SD_C04) or should i build a DSo before and make the reporting over it?
    thanks in advance,
    Nuno
    @points assigned

    Hi,
    as usual it all depends on your requirements and the environment you are dealing with.
    a) how many documents are created daily/weekly/monthly? --> check the data volume
    b) what are the reporting requirements? --> will users expect lots of drill down/thru possibilities and short response times
    c) what is the time frame for keeping the doc numbers/items for reporting?
    I already added the doc no. to the cube for smaller companies creating may be a 2nd and 3rd cube after some time (2 - 3 years) combining them via multicube. In case you will have lots of drill downs/thrus this is may be the only performant solution because on a ods you might have to build tons of indexes to enable fast reporting. In case the documents are only relevant for a short period (e.g. the last 3 - 6 months) you might think about creating a ods and do selective deletions of the older data......
    regards
    Siggi

Maybe you are looking for

  • How can I use an existing iTunes library with a new iTunes account

    My daughter is going to college, and wants to untangle herself from the family iTunes account. Right now, we have three iPods with libraries on three computers, all using my iTunes account - and have had no problems. She has signed up for a new accou

  • Empty mailboxes after importing from panther to tiger - can't solve

    Dear all, I have been happily using my ibook G3 300mhz for seven years now, running system nine first then jaguar then panther (currently 10.3.9). I have nearly all my emails from 98 onwards, which I first imported from eudora to eudora (8600 to iboo

  • There is no sound in my laptop

    ,,, that's after hp update there is no sound ,, so can you help me to find solution .. thanks ,,, This question was solved. View Solution.

  • SAPConsole doesn't connect

    Hello, We are implementing SAPConsole 7.1 on Windows Server 2008. I want to connect via SAPConsole to the two sap systems (two profiles). The case is that connection to SAP production system is working properly but connection to development system do

  • Performing Oracle DBA task on Linux OS

    Hi, I an Oracle 9i OCP DBA fresher. I've been performing DBA tasks on windows XP. But, now I wish to switch to linux as dual OS. Please tell me which distribution of linux would be suitable for me ( I've never used Linux before.). I also wish to upgr