Delivery has failed message to iCloud account

I regularly email a friend with an iCloud account and receive back a "Delivery has failed to these recipients or groups" message. She is actually getting the emails, but iCloud/MobileMe is trying to forward the emails to a nonexistant account and that causes it to bounce back to me (and presumably everyone else who sends her email). This is a user who has had Mac mail since the beginning of time, first a "DotMac" account, then a "MobileMe" account and now "iCloud". Evidentally this was caused by the transition to iCloud from her former account. Being nontechnical she tried to fix mail problems by creating a new iCloud account, which of course did not fix anything and created this problem where her real email address attempts to forward mail to a nonexistant email address, both theoretically sourced on iCloud. The Genius Bar guy told her it would automatically fix itself in June, which is both ridiculous and difficult to believe that it will self-repair.
Yes she's called and talked to Apple about it. It seems to me that there is a reference on the mail server that is causing emails to her real account to be forwarded to the not-real account. This reference can't be deleted? My friend has given up on getting it fixed. Any chance someone at Apple is willing to do something about it?

No on both replies.... I confirmed the same behavior with a different user that was able to send to all 1100 users before also...so it doesn't seem to be user specific.
I did try it again w the original user- this time the send log showed 0 unresolved recipients- and seemed to look normal- yet the sender received the same undelivered message and the emails were not sent\received.
159Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2195,172.16.240.11:11277,172.16.240.11:2525,*,,Transfering 1073 resolved and 0 unresolved recipient(s)
2014-01-07T20:51:33.159Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2196,172.16.240.11:11277,172.16.240.11:2525,>,BDAT 6868789,
2014-01-07T20:51:33.159Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2197,172.16.240.11:11277,172.16.240.11:2525,*,,Sending blob ADRC-2.1.0.0
2014-01-07T20:51:37.441Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2198,172.16.240.11:11277,172.16.240.11:2525,<,"250 2.6.0 CHUNK received OK, 6868789 octets",
2014-01-07T20:51:37.519Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2199,172.16.240.11:11277,172.16.240.11:2525,*,,"Transfering 2 mailitemlevel and 4292 recipient level properties for recipient(s) [email protected], [email protected],...etc..rest
of recipients.....
014-01-07T20:51:37.519Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2200,172.16.240.11:11277,172.16.240.11:2525,>,BDAT 90147,
2014-01-07T20:51:37.519Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2201,172.16.240.11:11277,172.16.240.11:2525,*,,Sending blob EPROP-1.2.0.0
2014-01-07T20:51:37.597Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2202,172.16.240.11:11277,172.16.240.11:2525,<,"250 2.6.0 CHUNK received OK, 90147 octets",
2014-01-07T20:51:37.597Z,Mailbox Proxy Send Connector,08D0CEFC897B36E7,2203,172.16.240.11:11277,172.16.240.11:2525,>,BDAT 72380 LAST,

Similar Messages

Getting "Delivery Notification: Delivery has failed" messages

When I haven't sent the email. I'm guessing someone is spamming my email address but how can I stop them? Or can I?
Getting more and more junk mail at my mac.com. Has my email address been comprimised?
Thanks,
Panama

Could this be the person spamming my email? Should I contact aol?
Possibly. But equally likely - if not more likely - is that someone you know with a PC has a virus which is using entries from their address as return addresses for spam.
Won't hurt to try contacting aol. Good luck with that.
charlie

Delivery Notification: Delivery has failed

I keep receiving a "Delivery Notification: Delivery has failed" message about a message that I apparently sent 4 years ago. How can I stop it?
Also please see notes at bottom of post!
thanks and regards
vats3
Delivery Notification: Delivery has failed
1 Attachment
This report relates to a message you sent with the following header fields:
Message-id: <[email protected]>
Date: Thu, 04 Nov 2010 11:58:43 -0700 (PDT)
From: {edited for privacy}
To: addressees deleted for this forum entry
Subject: Re: ACC Ladies Night Out
Your message cannot be delivered to the following recipients:
Recipient address: {edited for privacy}
Reason: SMTP transmission failure has occurred
Diagnostic code: smtp;554 5.7.9 Message not accepted for policy reasons. See http://postmaster.yahoo.com/errors/postmaster-28.html
Remote system: dns;mta6.am0.yahoodns.net (TCP|206.46.173.19|47987|63.250.192.46|25) (mta1640.mail.gq1.yahoo.com ESMTP ready)
Reporting-MTA: dns;vms173019.mailsrvcs.net (tcp_yahoo-daemon)
Arrival-date: Fri, 16 May 2014 10:29:51 -0500 (CDT)
Original-recipient: rfc822;{edited for privacy}
Final-recipient: rfc822;{edited for privacy}
Action: failed
Status: 5.0.0 (SMTP transmission failure has occurred)
Remote-MTA: dns;mta6.am0.yahoodns.net
(TCP|206.46.173.19|47987|63.250.192.46|25)
(mta1640.mail.gq1.yahoo.com ESMTP ready)
Diagnostic-code: smtp;554 5.7.9 Message not accepted for policy reasons. See
http://postmaster.yahoo.com/errors/postmaster-28.html
1. Hamburger Hamlet
2. Clydes
3. Rio Grande
The rest of the original messge was deleted by vats3 for this forum and also forum software gave me the following:
"Your post has been changed because invalid HTML was found in the message body. The invalid HTML has been removed. Please review the message and submit the message when you are satisfied."
could it be that the removed html was causing the problem?
About Us | Store Locator | Support | Site Map | Send Feedback | Careers | Verizon Think

If you are using a mail client, make sure the failed message is not in your outbox. If it is in there, the mail client will keep trying to send the email until you remove it.

IMCEAMAILTO issue causing "Delivery has failed ...".

What started as a single user experiencing an issue sending emails to some addresses has started to become multiple users.
In Outlook 2007, when a user does a reply to some emails the E-mail Type: changes from the normal SMTP to MAILTO and then when the user sends the email it is rejected because either Outlook or our Exchange server is adding @domain.local to the end of
the
recipient’s email address.
This also happens with emails where the senders address is shown as a clickable option [mailto:[email protected]].
Email address has been changed to
[email protected] for confidentiality reasons.
Delivery has failed to these recipients or distribution lists:
'[email protected]'
A problem occurred during the delivery of this message. Microsoft Exchange will not try to redeliver this message for you. Please try resending this message later, or provide the following diagnostic text to your system administrator.
Sent by Microsoft Exchange Server 2007
Diagnostic information for administrators:
Generating server: mailserver.ourdomain.local
[email protected]
#550 5.4.4 ROUTING.NoNextHop; unable to route ##
Original message headers:
Received: from mailserver.ourdomain.local ([fe80::d597:2413:93ab:cf17]) by mailserver.ourdomain.local ([fe80::d597:2413:93ab:cf17%13])
with mapi; Thu, 14 Oct 2010 13:58:28 +0100
Content-Type: application/ms-tnef; name="winmail.dat"
Content-Transfer-Encoding: binary
From: Internal User <[email protected]>
To: "'[email protected]'"
<[email protected]>
Date: Thu, 14 Oct 2010 13:58:27 +0100
Subject: email
Thread-Topic: email
Thread-Index: Actrn34QI8tEGRBCR/qQGIH5MxGgyA==
Message-ID: <[email protected].local>
Accept-Language: en-US, en-GB
Content-Language: en-US
X-MS-Has-Attach: yes
X-MS-TNEF-Correlator: <[email protected].local>
MIME-Version: 1.0

Okay here's the skinny. I don't see an immediate patch coming out for this. Also I'm concerned that Microsoft sees this currently as a single call, not that a bunch of folks are impacted.
While there is a bug they are tracking on this Offug49462, short term there will only be info detailed in the security update that there's a side effect of this update. No eta of when exactly that wording will be posted in the bulletin, but that certainly
will be sooner than a patch fixing this.
The trigger appears to be when you click on mailto links.
You have two choices as I see it:
1. uninstall the patch, and wait until I post back that there is an ultimate fix. I don't see this coming out in a week or two honestly, so be aware that per my read on the situtation, this won't be resolved quickly with another patch.
2. leave the security patch on, and as a workaround to ensure that you don't accidentally click on a mailto link and thus flip your email addresses and get NDRs to do the following:
In Outlook:
Click Tools > Options
Click the Mail Format tab
Click Editor Options
Click Proofing
Click AutoCorrect Options
Click the AutoFormat Tab
Uncheck "Internet and network paths with hyperlinks"
Click OK, OK and OK
Neither one is good, but it's all I have right now until something is coded up long term.
So here's where you can do me a favor. Call 1-800-Microsoft and explain to them you have an issue with a security update 2344993, say that you too are impacted by Offup49462 bug and tell them how many in your firm/office/school have been impacted.
Like I said right now they only have one call on this issue, and I'd like to ensure they see more numbers of impacted people.
Thanks.
Susan-at-msmvps.com

Redirect Rule - Delivery has failed to these recipients or groups

First of all my apology if this is wrong Forum. Please guide me to correct forum.
Scenario is that we need to send emails to AD Group using C# code or script.
First we tried C# code and it don't work, as per our finds, log in / password is required. Also, it was taking to much time because of protocol and we need to send 10 to 15 emails at same time.
We tried script and this time we created a mail box say, temp. We send emails to temp and added rules on bases of subjects of emails.
Now, issue is if we setup forward rule, temp is able to forward email to AD group. If we setup redirect rule, email is not send to AD Group and temp received failure delivery.
Delivery has failed to these recipients or groups:
AD Group Name
Your message can't be delivered because delivery to this address is restricted.
For more information about this issue see DSN code 5.7.1 in Exchange Online.
We even made temp owner of AD group.
Any help?
http://farhanfaiz.wordpress.com

Hi malikfarhan
I understand that delivery has failed to those recipients or groups when you setup the redirect rule.
Based on my research, you could have a try as follows
Open the EAC, navigate to Recipients > Groups.
In the list of groups, click the distribution group that you want to view or change, and then click Edit
icon .You can go to properties for DG, -> Select Delivery management ->Senders inside and
outside of my organization , Click on Save.
You can further limit who can send messages to the group by allowing only specific senders to send messages to this group. Click
Add + and then select one or more recipients.
For more details, you could click this link: https://technet.microsoft.com/en-us/library/bb124513.aspx?f=255&MSPPError=-2147217396
I am glad to be of help to you .
Regards,
David

Delivery has failed to these recipients or groups

Delivery has failed to these recipients or groups:
[email protected] ([email protected]) The server has tried to deliver this message, without
success, and has stopped trying. Please try sending this message again. If the problem continues, contact your helpdesk.
Diagnostic information for administrators:
Generating server: HYPER-SUNMAIL.xyz.org Receiving server: abc-bd.com (213.199.154.87)
[email protected] 7/29/2014 9:41:44 AM - Remote Server at abc-bd.com (213.199.154.87) returned '550 4.4.7 QUEUE.Expired; message expired' 7/29/2014
9:36:07 AM - Remote Server at abc-bd.com (213.199.154.87) returned '451 4.4.0 Error encountered while communicating with primary target IP address: "421 4.2.1 Unable to connect." Attempted failover to alternate host, but that did not succeed. Either
there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 213.199.154.87:25'
Original message headers:
Received: from HYPER-SUNMAIL.xyz.org (192.168.0.21) by HYPER-SUNMAIL.xyz.org
(192.168.0.21) with Microsoft SMTP Server (TLS) id 15.0.847.32; Sun, 27 Jul
2014 15:41:37 +0600
Received: from HYPER-SUNMAIL.xyz.org ([::1]) by HYPER-SUNMAIL.xyz.org
([::1]) with mapi id 15.00.0847.030; Sun, 27 Jul 2014 15:41:37 +0600
From: Administrator <[email protected]>
To: "[email protected]" <[email protected]>
Subject: check the mail
Thread-Topic: check the mail
Thread-Index: AQHPqX711QV7LAHG7kGziKuia+iJGw==
Date: Sun, 27 Jul 2014 09:41:37 +0000
Message-ID: <[email protected]>
Accept-Language: en-US
Content-Language: en-US
X-MS-Has-Attach:
X-MS-TNEF-Correlator:
x-originating-ip: [192.168.0.5]
x-brightmail-tracker: 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
Content-Type: multipart/alternative;
boundary="_000_ddb6a985d4d0418b91ad37942ea4dcecHYPERSUNMAILxyzorg_"
MIME-Version: 1.0
Md. Ramin Hossain

Hi,
From your description, I recommend you check the SMTP protocol logging on Send Connectors to find out why this message can't be delivered. SMTP log is very useful on diagnose mail delivery problem.
Here is the default location:
C:\Program Files\Microsoft\Exchange Server\V15\TransportRoles\Logs\FrontEnd\ProtocolLog\SmtpSend
For more information, here is a thread for your reference:
Configure Protocol Logging
http://technet.microsoft.com/en-us/library/bb124531(v=exchg.150).aspx
Hope it helps.
Best regards,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Amy Wang
TechNet Community Support

Delivery has failed to Recipients NDR

Question on a non delivery receipt. My boss received the email receipt below (1<sup>st</sup> one) which is fine as the guy no longer works there. But the area of concern is highlighted. It states another person in the company. He is not listed in
the email address area. I did a test on the email to see what I would get. That is the second one below. I haven’t seen this before do you have any idea why this would show this way? Just want to be sure that person is not receiving any emails that my boss
sends or receives or done something that I should further investigate.
Diagnostic information for administrators:
Generating server: impgroup.com
recipient innotech-execaire.com #550 5.1.1 RESOLVER.ADR.RecipNotFound; not found ##
Original message headers:
Received: from IAL-Iron.innotech-execaire.com (10.10.0.1) by
monexc11.innotech-execaire.com (10.10.3.20) with Microsoft SMTP Server id
14.3.181.6; Mon, 30 Mar 2015 11:14:42 -0400
X-IronPort-Anti-Spam-Filtered: true
X-IronPort-Anti-Spam-Result: A0ClAQBhZxlVnHaTN9hZA4JDgRVcw2gGgUUBBYI3g0ACgTU4FAEBAQEBAQEQAQEBAQEICwkJFC6EFAEBAQQFAQICBQEVAwUBJgooAQICCQ4DBAEBBgEBAQoOAQYHAgUQAgIGBSAJCAIEAREBCwUJiAIDEbEQAQGUBAgFhRwBAQEBAQEBAQIBAQEBAQEBAQEBARcEiiZ/gkeBTxEBJAYLCwsLAQYLhBwFixqDNIIOYYI9hFYzgmkRgyEFhmeCUIJjg0iCJByBblEBAYEJgTgBAQE
X-IPAS-Result: A0ClAQBhZxlVnHaTN9hZA4JDgRVcw2gGgUUBBYI3g0ACgTU4FAEBAQEBAQEQAQEBAQEICwkJFC6EFAEBAQQFAQICBQEVAwUBJgooAQICCQ4DBAEBBgEBAQoOAQYHAgUQAgIGBSAJCAIEAREBCwUJiAIDEbEQAQGUBAgFhRwBAQEBAQEBAQIBAQEBAQEBAQEBARcEiiZ/gkeBTxEBJAYLCwsLAQYLhBwFixqDNIIOYYI9hFYzgmkRgyEFhmeCUIJjg0iCJByBblEBAYEJgTgBAQE
X-SBRS: 5.6
Received: from mail113c45.carrierzone.com ([216.55.147.118]) by
IAL-Iron.innotech-execaire.com with ESMTP; 30 Mar 2015 11:14:40 -0400
X-POP-User: doug.den atsainc.com
Received: from garrettPC ([209.105.177.28]) by mail113c45.carrierzone.com
(8.13.6/8.13.1) with ESMTP id t2UFBiTa006504;       Mon, 30 Mar 2015 15:12:13 +0000
From: Sender <sender atsainc.com>
From my email:
Diagnostic information for administrators:
Generating server: impgroup.com
recipient innotech-execaire.com #550 5.1.1 RESOLVER.ADR.RecipNotFound; not found ##
Original message headers:
Received: from IAL-Iron.innotech-execaire.com (10.10.0.1) by
monexc11.innotech-execaire.com (10.10.3.20) with Microsoft SMTP Server id
14.3.181.6; Wed, 1 Apr 2015 06:43:56 -0400
X-IronPort-Anti-Spam-Filtered: true
X-IronPort-Anti-Spam-Result: A0CyAAB5yhtVnG+TN9hZA4JDgRVctjiNKiEGgUYBhz04FAEBAQEBAQEQAQEBAQEGDQkJFCoEhBsIAgUBGAUmCwEnBQ1bOAQDAQQTCwWIH6UCjlsBAZoeDCCQOQWEFwWLHoVFYpRHiQuELlGCQwEBAQ
X-IPAS-Result: A0CyAAB5yhtVnG+TN9hZA4JDgRVctjiNKiEGgUYBhz04FAEBAQEBAQEQAQEBAQEGDQkJFCoEhBsIAgUBGAUmCwEnBQ1bOAQDAQQTCwWIH6UCjlsBAZoeDCCQOQWEFwWLHoVFYpRHiQuELlGCQwEBAQ
X-SBRS: 5.6
Received: from mail106c45.carrierzone.com ([216.55.147.111]) by
IAL-Iron.innotech-execaire.com with ESMTP; 01 Apr 2015 06:43:57 -0400
X-POP-User: msandoval .atsainc .com
Received: from tyn2229 ([209.105.177.28])   by mail106c45.carrierzone.com
(8.13.6/8.13.1) with ESMTP id t31Ahhxn000456 for
<recipient innotech-execaire.com>; Wed, 1 Apr 2015 10:43:48 +0000
From: Mark Sandoval <Sender atsainc.com>
To: <recipient innotech-execaire.com>
Subject: test
Date: Wed, 1 Apr 2015 05:43:43 -0500
Message-ID: <000b01d06c68$bad9aa10$308cfe30$ atsainc. com>
MIME-Version: 1.0
Content-Type: multipart/alternative;
        boundary="----=_NextPart_000_000C_01D06C3E.D203A210"

Hi,
As a test, please try sending multiple emails to the recipient, does it always state the same highlighted user? If yes, I suspect the highlighted user may have been set as the recipient's delegate.
Please detail your environment a bit if possible, are you using Office 365 or Exchange on-premise? Office 365 users may get the error in the scenario mentioned in this kb below:
"Delivery has failed" and "550 5.1.1 RESOLVER.ADR.RecipNotFound" NDR after a mailbox is moved to Office 365
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Password fail message from iCloud

I Am submitting this question for my cousin, who is receiving a Password Fail message on her iPad, iPhone and MacBook. Just recently she changed her password to her Apple ID because of a possible security attack with her printer. Since then she has been receiving Password Fail Messages from iCloud. Since iCloud uses Apple ID as a login mechanism, she is unable to initiate a question to this forum.
she attempted to reset her password but when she did, she received a Security question, which she answered but she received a failure notification that her answer was incorrect. I recommended she try again and she received the same fail notification and now she is locked out And still receiving password Fail notifications.
IIs there anything this forum can recommend to remove the Fail alerts?

It is a phishing attempt. Do not respond. Do not divulge any personal or financial information. You can use the address below to forward the suspect email message to Apple.
[email protected]
The link below has information to help identify fraudulent emails.
http://support.apple.com/kb/HT4933

HT4436 If someone else has set up an ICloud account (that uses his name in the email address) using my Apple ID, do I have to change my Apple ID to open an account with my name in the email address?

If someone else has set up an ICloud account using my email address and Apple ID but has chosen his name for the mail name, can I get rid of his name in the [email protected] and put mine in there? Or do I have to set up a whole new acount with a new Apple ID? Will I be able to do that with his name already linked to my email address?

How did he manage to do this? - he would have to have known your password if he was using an existing Apple ID. You should change it immediately to something strong and unguessable. That will prevent him accessing the account or using the email he has set up (assuming he hasn't changed the password and locked you out).
You can't change the primary @icloud.com address once set up, though you can create additional addresses as email aliases: if he's given this address out you will get his emails but you could set up a Rule to trash them.
You might to better to create a new ID and iCloud account anyway. To do this you wil need a different non-Apple email address (you could use a free GMail one); or you have the option in the iCloud prefs pane to choose an @icloud.com address and make that the ID.

I have brought a iphone 4 and the person i brought it from has not deleted her icloud account i need her pasword to delete it but hse wont give it to me what can i do how can i add my icloud account can you give me a reasonable answer please. thank you

i have brought a iphone 4 and the person i brought it from has not deleted her icloud account i need her pasword to delete it but hse wont give it to me what can i do how can i add my icloud account can you give me a reasonable answer please. thank you.

The seller needs to follow this procedure:
http://support.apple.com/kb/TS4515
If she refuses, then as Tim suggested the iPhone is probably stolen. You'll need to contact your local police department and ask how to proceed.
Regards.

Connection to server has failed on my email account, why ?

connection to email has failed although I have a strong wifi connection, why

I have exactly the same problem.
I exchanged my iphone 4 to a 4S at the Apple store with data uploaded via icloud.
I am connected to the internet and all my email accounts operate accept for one gmail account that gets the message "The connection to the server failed".
I can access the account from my ipad but not fron the iphone. The other Gmail account operates perfectly. I can still use my old iphone to access this gmail account. It is just that it will not work on the new iphone 4S. I have made settings the same in both iphones. HELP

Delivery Notification & Failed Message Routing At the same time

Hi All,
Here's our scenario.
BizTalk Orchestration --> One Way Send Port --> SAP
Now, we've enabled 'Delivery Notification' on the Logical Send Port, so if the message fails due to some connectivity issue, it's caught in Orchestration and persisted in another custom database from where it'll be automatically retried. Problem is although
the Orchestration instance is terminated after catching the exception, Send Port instance remains suspended, we don't want that, to solve this we 'Enabled Failed Message routing' on the Send Port and had another Send Port to subscribe to those failed messages
and terminate them.
But after that, failures are not really handled as expected, sometimes the message is not routed back to orchestration (delivery failure notification), sometimes the Failed Message routing port is not getting the message, it's intermittent and unexpected.
Would you guys be able to help us here with.
1. Do you see us doing something wrong?
2. Any other solution to this problem rather than using 'Failed Message routing', may be programmatically terminating the Send Port instance? any examples of that?
Thanks alot
Syed

Hi Sayed,
In my view the issue is with your design of using Delivery Notification and Failed message routing together.
Case 1 : The thing is that when you enable failed message routing on the send port it will not suspend the message and the message will be delivered successfully and since message will be delivered successfully your Delivery Notification exception will not
get invoked.
Case 2 : Since the delivery notification works on the ACK NACK concept, sometimes it could happen that before failed message routing send port subscribes the message the NACK message may have been send to the Orchestration hence the message is routed back
to the Orchestration.
Hence you are getting the unexpected behavior. You could always create powershell or MSbuild scripts to remove the send port suspensions. Below links gives you the code to remove suspended and terminated instances :
http://code.msdn.microsoft.com/windowsdesktop/Script-to-delete-biztalk-1cd312ac
http://stackoverflow.com/questions/11795105/get-all-suspended-instances-for-specific-application-in-biztalk
Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question
Regards,
Rahul Madaan
biztalkvillage.blogspot.com

TS3988 i have updated my phone with the new software and it keeps saying that verification has failed on my icloud and that the certificate for service is invalid. following this now my phone does not recognise any of my iphone contacts and so i cannot f

i have updated my phone with the new 6 IOS. Since doing this my icloud account keeps saying that verification failed and the certificate for service is invalid. Folowin this problem my phone also does not recognise my other iphone contacts so i cannot facetime or send imessage

You don't need an app. You need couple's counseling. I believe what you want to do may also be illegal in many jurisdictions.

TS3988 My iPad has a message saying: "iCloud Backup. This iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi." When I tap OK, nothing happens. The message won't disappear and I cannot access

My iPad has a message on it saying: "iCloud Backup. This iPad hasn't been backed up in 2 weeks. Backups happen when this iPad is plugged in, locked, and connected to Wi-Fi."
When I tap OK, nothing happens. The message doesn't disappear and I have no access to any of the other icons. I tried shutting down the iPad, but it won't even let me do that.
What do I do now?
Thank you!

Welcome to Apple Support Communities
Hold Sleep and Home buttons for 10 seconds until the device restarts to perform a reset, so you will be able to use your device again

Z68a-G43 (g3) overclocking has failed message/boot problems

Mobo- z68a-G43 (g3)
Cpu- Intel Core i5 2400 3.10ghz
Memory- Kingston 4gb (2 sticks)
VGA- NVIDIA GeForce GTX 460
PSU- Thermaltake TR2 600w
Windows 7 Ultimate 64bit Service Pack 1
I just built this computer two months ago and it was running perfect. Then I started getting a black BIOS screen when ever I turned the computer on. It said "Warning! Previous overclocking has failed. Press F1 to go to set up. F2 to reset settings and continue." This confused me because I have never put it into overclock. Soon after when I tried to turn my computer back on it would not boot. It tries to boot up several times and only the fans spin. The only way to stop it is to turn the power switch on the psu off. After all this occurred my psu would no longer work either. I sent both my mobo and psu in for warranty and just now got the new ones back. I put it all together and it was working perfectly. A few days later the same message came up again "Warning! The previous overclocking has failed. Press F1 to go to set up. F2 to reset settings and continue." I reset it to the defaults and all the BIOS are updated but it has happened again. My computer will no longer start up but my psu is still functioning at least this time. I have reset the CMOS, tried one stick of RAM, took the comp apart made sure everything was firmly in place and put it back together, and tried unplugging everything but the basics but still the same issue fans run and it keeps trying to start up over and over and never boots. I refuse to believe that this mobo is broken because it is brand new. I was wondering if there is some sort of compatibility issue or voltage problem but I can't figure out what to do. Please someone give me some help. It is very much appreciated.

Thanks but I finally figured out the problem. The socket is set to 1333MHz and I have my RAM at 1600MHz. I just had to manually clock it higher becasue that is overclocked.

Delivery has failed message to iCloud account

Similar Messages

Maybe you are looking for