Delivery is to be done at the end user location not at the storage location

Hai Gurus.
I have a problem
I am working for a construction industry.. I had a storage location at say" X":. And in case of emergency for the material to the end user at different locations, delivery is to be done at the end user location not at the storage location.. Where to give the end user location address .As delivery address in PO item details will be plant address. pl help
regards
chandrasekhar

As i underdstand from your description of issue .You dont want to recive the material in the storage location of your main plant but you want to recive the goods directly to the end user from the vendor.This is typical scenario of Third party PO ..so kindly traise third part PO to vendor ..by changing the item category ...and so the delivery addfres popolutaed in ur PO will be directly from the ship to address from your sales order.rathewr than the storgae location you wd have specified in ur material master

Similar Messages

After installing icloud in ipad air model-MD785AE/A serial number-DM*****K10 had upgraded the storage to 20 gb. Payment has been done but the storage still shows 5 gb. Please kindly help.

After installing icloud in ipad air model-MD785AE/A serial number-DM*****K10 had upgraded the storage to 20 gb. Payment has been done but the storage still shows 5 gb. Please kindly help.
<Personal Information Edited by Host>

adetoye50 wrote:
Dear Contacts Journal Support Team,
FYI, this is a user to user support forum. You are NOT addressing Apple here.
Honestly, I doubt anyone is really going to take the time to read the novel you have written.

End users are not able to save interactive pdf form created with designer

I am new to using LiveCycle Designer and have created a pdf form but my end users are not able to save edited form. Does this have something to do with whether the form is static or dynamic. If so, I am not exactly sure how to use the restorestate option to convert it back to static. I also tried to enable the "user rights access in adobe reader" under the advance menu and had no luck.
My end users have acrobat reader 9 - do I need them to download anything else, maybe professional.

Thanks Paul for your reponse
In my Adobe Pro I don't see the option Reader Extend rather I enabled "Enabled Usage Rights in Adobe Reader" amd I figured this was somewhat the same. So if I enabled this option in Adobe Pro already and they are still not able to edit the fillable text slots or save it what other option do I have in figuring this out.

End User Can Not Open A Form within Responsibility

Hi to all,
I have an end user who tries to click on a form within a responsibility. And the form does not launch. As matter of fact, the browser green progress bar does not show up. There are other forms within that same responsbility that she is able to launch.
This end user was not having this issue before. She was able to launch any forms under any responsibility without any issue.
I tested the same responsbility and same forms on my machine as was able to launch without any issue.
These are the following conditions the end user has:
IE 7
Jinitiator 1.3.1.29
I tried the following steps to remedy the issue:
Cleared cache and cookies.
Clear jar cache
Did not fix the problem
Reinstalled Jinitiator
Did not fix the problem
I turned on the show java console and show exceptions dialog box on end user jinitiator. When I go back and click on the problematic form, no java console shows up, nor does any exceptions dialog box.
Does anyone have an idea, why this may be occurring and how to resolve this issue.
Thanks
F. Lucio
Edited by: Ferreira Lucio on Oct 9, 2009 1:15 AM

Greetings Hussein,
I worked on your recommend steps, and still unable to resolve issue:
Try opening the form using your username from the user's machine, and do the same with this specific user from some other machine.
I logged onto oracle with my credentials, and went to the same responsibility and form. This issue happens to me. But when I go back to my local machine. I have no problems.
Did you try using some other browser on the user's machine (for example, Firefox)?
I installed firefox, but everytime I click on a form, it tells me to download jinitiator.
Any recent changes have been done on the user's machine or in the user's profile options?
Unsure what profile options have changed for user
Note: 310961.1 - How To Enable The Java Console Jinitiator 1.1.8 and 1.3
Note: 232651.1 - How to Enable Tracing in Jinitiator
If none of the above helps, obtain FRD and see if you get more details about the error -- See (Note: 150168.1 - Obtaining Forms Runtime Diagnostics (FRD) In Oracle Applications 11i).
I uninstalled jinitiator, then reinstalled. Turned on java console and enabled tracing. Console/tracing does not come up for this form. On other forms it does.
I uninstalled jinitiator a third time. Then reinstalled. What I notice is that jinitiator still has the java console checked and tacing parameters set. What I believe could be happening is the jinitiator is not being uninstalled completely.
Where or how can I check if the jinitiator gets removed completely.
I have check the control panel and jinitiator is not there. I also check HKLM and it is not there also.
Any ideas how to move forward.

Requestors end users will not acces a site directly and add list items

Hi
i created a site for IT services and this site includes some lists for various services
http://Intranet.com/Units/IT services
main site is http://Intranet.com
and also workflow are configured for these lists for create new item
and only 3 type of users will work on these lists
1)Requestors (Create,View rights)
2)Contributers (Contribute permissions)
3)Approvers
Scenario:
-- Requestors will create list items and approvers will Open this list item and edit list item like
approve and add a Contribute userid in AssignedTO field
---Contribute user also will recieve email and he also Open item and edit ans save this list
so basically its backend , data inserted by requestors will save in lists
so here i need all Requestors end users will not acces IT services site and add list item directly in list.
is any other option availabe that i will provide a diffrent front end page for Requestors at root level site (which is Intranet.com )
and they will add and view only their data, and Contributers also view and edit all users data.
adil

Hi adilahmed,
You can use two web parts to show the list items for different group.
In the List view page, add another list view web part, set the first web part list view to filter Created By field with Me, second list with all list items.
Then set the first web part with audience Requested group, and second web part with audience Contributers group.
Thanks,
Qiao Wei
TechNet Community Support

LC Rights Management End User can not find groups or users during policy creation process

hello,
I'm using LC8.0.1 turnkey install on win2003 box.
Problem is LC Rights Management End User can not find groups or users (search result is empty) during policy creation process, thus can not apply specific restriction to certain groups or users.
I have create a user in the DefaultDom and assigned the following roles:
Live Cycle Rights Management Invite User
Live Cycle Rights Management End User
How can I allow the above created user to search for groups and user during policy creation? Thanks.

Good catch Phuc. Make sure you do this for each Policy Set as well as My Policies.
Here's an overview of Policy Sets:
http://blogs.adobe.com/security/2008/04/delegating_control_over_policy.html
Cut and paste the URL.

How to restrict end-user from not using certain movement-types in MB1B

Dear Gurus,
My client wants that end user has access to only particular movement types in MB1B.i.e only to 311 and 412,421E.
They do not want any other movement types to be access by end-users in MB1B
How to go about this requirement?
Thanks in advance
Regards
Ram
Edited by: RAMKUMAR WARIYAR on Jun 27, 2009 2:14 PM

hi,
This is possible you can restrict and allow user for movement type which they can do through any t code.
Contact yours BASIS consultant for that
Regards,
Vishal
Edited by: VS on Jun 27, 2009 5:46 PM

End user notifications not appearing for Software updates

I'm pushing out security updates to Windows 7 clients. The updates are deploying correctly but some users say they are not seeing any notification that the updates are available or that they are installing - It's set up in the deployment to notify. They
say the first time they know about them is when the machine reboots. On my own machine I always get the notifications, on all the IT users near me we always get the notifications, and on all the test machines I've built I see the notifications. It's possible
my users are just not registering the message before it fades away.
I've made some changes to the Computer Agent, Greater than 24 hours - remind every 3 hours, less than 24 remind every 2 and less than 1 remind every 5 minutes so that may help. What I'm wondering though is there a local log on the client end anywhere that
updates every time a notification appears - I could at least verify it - or is there a local reason why the balloon doesn't show. It's not turned of in a GPO.
Is there any way that the balloon can be replaced with a pop up that the user would have to click OK to clear?

Thanks for the reply - I had a look at the logs - here's an example
Adding Open Software Center Menu for Icon Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete, because no required item and no reboot are present.    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete at get_VisibleMenuItems)
SCClient   05/11/2014 12:15:55   1 (0x0001)
Setting the current app data    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleNotificationEvent)   SCClient   05/11/2014 12:15:55   1 (0x0001)
Verbosity set to low, don't show balloon    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleNotificationEvent)   SCClient   05/11/2014 12:15:55   1 (0x0001)
The current visible object is of type Microsoft.SoftwareCenter.Client.Notification.NotifyObjectInstalling with priority Installing    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleCurrentNotifyObject)   SCClient
05/11/2014 12:15:55   1 (0x0001)
This object is of type Microsoft.SoftwareCenter.Client.Notification.NotifyObjectComplete with priority Completed    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at HandleCurrentNotifyObject)   SCClient
05/11/2014 12:15:55   1 (0x0001)
Removing monitored notification object Microsoft.SoftwareCenter.Client.Notification.NotifyObjectInstalling for app Security Update for Microsoft .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2972100)
(Microsoft.SoftwareCenter.Client.Notification.MonitoredNotifyObjectsCollection at RemoveObject)   SCClient   05/11/2014 12:15:55   1 (0x0001)
Number of total seconds in countdown is 5400; starting value is 4; seconds til restart is 5396, system will restart at 13:45:54 (utc end time = 13:45:55)    (Microsoft.SoftwareCenter.Client.Pages.RestartCountdownDialog at .ctor)
SCClient   05/11/2014 12:15:58   1 (0x0001)
User will be alerted (and hide/close disabled) at 13:15:54    (Microsoft.SoftwareCenter.Client.Pages.RestartCountdownDialog at .ctor)   SCClient   05/11/2014 12:15:58   1 (0x0001)
ShowBalloonTip: determining if tooltip should be shown for notification type = Microsoft.SoftwareCenter.Client.Notification.NotifyObjectRestartCountdown    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)
SCClient   05/11/2014 12:15:58   1 (0x0001)
Notification is for a logoff/restart required or logoff/restart countdown.    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)   SCClient   05/11/2014 12:15:58
1 (0x0001)
Attempting to display the notification balloon with title 'Restart Required' and tooltip 'Recently installed software requires your computer to restart in 90 minutes to complete the installation. No additional software can be installed until your computer has
restarted. '.    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)   SCClient   05/11/2014 12:15:58   1 (0x0001)
The operating system version is 6.1.7601.65536    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)   SCClient   05/11/2014 12:15:58   1 (0x0001)
This is Windows 7 or earlier, showing notification balloon    (Microsoft.SoftwareCenter.Client.Notification.NotifyObjectBase at ShowBalloonTip)   SCClient   05/11/2014 12:15:58   1 (0x0001)
NamedTimer: Starting timer timeToAvoidDisplayingTheSameBalloon, interval = 120000, period = -1    (Microsoft.SoftwareCenter.Client.Common.NamedTimer at .ctor)   SCClient   05/11/2014 12:15:58   1
(0x0001)
NamedTimer: timeToAvoidDisplayingTheSameBalloon initial interval = 120 seconds, subsequent period = 0 seconds, overall due at 05/11/2014 12:17:58    (Microsoft.SoftwareCenter.Client.Common.NamedTimer at SetTimerInternals)   SCClient
05/11/2014 12:15:58   1 (0x0001)
Would that imply that it's set not to show the balloon - except on the reboot?
I had a look at the following policies using wbemtest
DisplayNewProgramNotification
CCM_SoftwareDistributionClientConfig/DisplayNewProgramNotification
CCM_ClientAgentConfig/DisplayNewProgramNotification
and both are correct - DisplayNewProgramNotification set to true

A test question only... (this is an end-user question not an admin one)

You can try responding here if you want.

> The overview page says there are
2677 Audition CS5.5 discussions but only 326 discussions about Audition
3.01 and all earlier versions.
I haven't bothered going
through and looking for/counting everything but surely this is a
mistake. Even if you've deleted thousands of useful discussions on the
earlier stuff, I'm sure I haven't seen 2677 discussions about CS5.5.....
The Audition 3.0.1 and earlier forum is new, split off from the Audition CS5.5 forum. I migrated over the recent threads that were obviously about Audition 3.0.1 and earlier, but there's no easy way to move the whole mess over.
This doesn't impair anyone's ability to search for old threads or use old links to these threads, so this shouldn't actually affect anyone's functional use of the forum.
If (when) older threads are reawakened by someone responding to them, I'll see them and move them over to the 3.0.1 forum.
This is the same thing that we did when splitting the Premiere Pro forums into version-specific forums, and it only took a couple of weeks for everything to settle out.

Find the User ID through which the end user logged in BEx Analyzer?

I want to fetch the end user USERID who is executing the query. I am the end user and want to view a report, so I will login into BEx Analyzer with my userid and start executing query. Is there any way I can find that ID, in any table, program, function module or some where........?
I don't want 'created by', 'last changed by'. I want ID through which end user is logging into in Analyzer.
Also if the end user is logging in through RSRT wanted to know the SAP login user ID through which the user logged in?

Hi,
If you want to see the end user id that is running the query, and then open the workbook, select Layout from the menu u2013 Display Text elements. Click on All (or General, Filters or Variables based on your requirement). It will display the technical name, info provider, current user details. You can save it as existing work book transport to production, then when this query executed you can find end user login id.
May be you can check RSRWBTEMPLATE table for workbook users details. Mostly end user will not have access to RSRT.
Hope it helps you
Thanks
Riyez

How can i disable debug information from the end user

By changing debug flag in the url to YES it is possible to view debug information. i want to disable debug information, so that end user could not see debug information. can anyone please tell me the solution.

Sundhar,
when you export the application select Debugging:No
It's one of the available properties together with Build Status, Export Comments, Export Supporting Objects Definitions and so on.
Bye,
Flavio
http://www.oraclequirks.com

How can I hide the provisioning tab from end users?

Hi,
Can someone tell me if it's possible to hide the "provisioning tab" within FIM? End users do not need to see this.
I know how to modify RCDCs to hide individual fields, but I'm not sure about entire tabs.
Thanks in advance

http://social.technet.microsoft.com/Forums/en-US/74242380-c8ce-4904-863e-f28ae3605c7e/fim-r2-end-user-portal-customization?forum=ilm2

DPM 2012 still requires put end users into local admin groups for the purpose of end user data recovery?

On client computers that are protected by DPM 2010 and prior versions, you had to put the end users account in the local administrators group. If you did not add the end user account to the local administrators group you would get this error after opening
the recovery tab in the DPM client: “DPM found no recovery points which you are authorized to restore on the specified DPM server. You can restore only those recovery points for which you were an administrator at the time the
backup was taken. To restore other recovery points, contact your DPM administrator, or attempt to restore from another DPM.” This is not ideal on many networks because the end users are not allowed to have local administrator access.
Ths fix to this was included in hotfix 2465832 found here: http://support.microsoft.com/kb/2465832.
This hotfix (a hotfix rollup package for DPM 2010) resolves other issues with DPM 2010 as well. You can find the full list of what this hotfix corrects on that link.
One would think this issue should have been resolved in DPM 2012, however I am encountering the same exact issue, had to include end-users into the workstation local admin group before they can search for recovery points on the DPM server. This is not acceptable
practice.
Is there a new hotfix for the same issue on DPM 2012? I am hesitated to apply KB2465832 since it also includes many other fixes for DPM 2010, which may not appicable for version 2012.
Please help.
Thanks,

This is a hands off solution to allow all users that use a machine to be able to restore their own files.
1) Make these two cmd files and save them in c:\temp
2) Using windows scheduler – schedule addperms.cmd to run daily – any new users that log onto the machine will automatically be able to restore their own files.
<addperms.cmd>
Cmd.exe /v /c c:\temp\addreg.cmd
<addreg.cmd>
set users=
echo Windows Registry Editor Version 5.00>c:\temp\perms.reg
echo [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection]>>c:\temp\perms.reg
FOR /F "Tokens=*" %%n IN ('dir c:\users\*. /b') do set users=!users!%Userdomain%\\%%n,
echo "ClientOwners"=^"%users%%Userdomain%\\bogususer^">>c:\temp\perms.reg
REG IMPORT c:\temp\perms.reg
Del c:\temp\perms.reg
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
That's a good one! Thanks for that.
I've been scripting on KIX for some time, so here is mine, hope it helps to someone... (it's probably not the best, but it works)
========================================================================
$RC=setoption("WOW64AlternateRegView","on")
$DPMkey = "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft Data Protection Manager\Agent\ClientProtection"
$uservariable = "%userdomain%\%username%"
If KeyExist ($DPMkey)
$Userstring=ReadValue($DPMkey, "ClientOwners")
If $Userstring == ""
WriteValue($DPMkey,"ClientOwners", $uservariable, "REG_MULTI_SZ")
? "Key created"
else
If not instr($Userstring,$uservariable)
$Userstring = "$Userstring,$uservariable"
WriteValue($DPMkey,"ClientOwners", $Userstring, "REG_MULTI_SZ")
EndIf
Endif
EndIf
==========================================================================
The problem actually is that you still need to use an admin account to write on the registry, so ensure you configure it properly on the schedule task.
In case you use a service account on the schedule task... the "$uservariable" will get populated with that account. As a work around to this... I changed it for the following line:
=========================================================
$uservariable = ReadValue("HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Authentication\LogonUI", "LastLoggedOnSAMUser")
=========================================================
The only problem with that, is that key gets created/updated only if user gets logged phisically on that PC, but will not work for anyone connecting through RDP.

How to restrict end user from modifying/saving the workbook?

<Moderator Message: As you deleted my comment in this thread by editing it again, I am locking it now>
Hi,
We have created few workbooks. The requirement is that the end user should not be able to modify or save the workbook. We tried using S_RS_Tools authorization object with "themes" in the Command ID. But this does not seem to solve our problem. Please suggest whether it is possible to enter any other value in this field to restrict access to the end user.
We also tried including the following authorization objects with the corresponding values :
1.S_GUI with the value Activity=60(import)
2.S_USER_AGR with Activity = 03 and * in Role.
3.S_BDS_DS with Activity = 03(display) and 30 ; Class Type = OT.
4. S_USER_TCD with tcode = RRMX.
But still the end user is able to modify the workbooks. (The end user must not be able to make changes to settings of any of the buttons in the design mode, must not be able to save the workbook).
Please suggest the corrections required. Also kindly suggest if there are any other ways to resolve this issue <removed by moderator>.
Your help is appreciated.
Thanks.
Edited by: Siegfried Szameitat on Nov 26, 2008 12:55 PM
Edited by: suresh naidu on Nov 26, 2008 1:19 PM
Edited by: Siegfried Szameitat on Nov 26, 2008 1:23 PM

Hi,
Only few people have authorization to create S.O. w.r.t. quotation (as in our case, sales ppl create quotation and Finance ppl create S.0., with reference to Quotation Only - T.Code: VTAA).
Others have only authorization to View/ Display, VA03.
Consult your Basis-Admin, he will create appropriate role & assign T. Code: va03 for list of user, provided by you.
Best Regards,
Amit.
Note: You can't restrict anyone with T. Code: VA02, to change qty or price in Sales order, directly.

End user can't see the KM content

Hi,all
If the end user can't see the KM content(pictures,text documents)
what may e the problem?On my pc all is working fine.
May be it depends on InternetOptions->Security options on
specific computer?
Regards,
Michael

Hello Michael,
1> Are you an end user as well/
2> Try and chek the permissions of each Km content i.e pictures, text, documents.
If the end user does not have rhe permissions then you will have to assign the permissions before the nd user could see rh content
Thanks
Pradeep Bhojak

Delivery is to be done at the end user location not at the storage location

Similar Messages

Maybe you are looking for