Dell Venue Pro 11 w/Dock / Unable to concurrently use ethernet and wifi?

Does anyone know why you are unable to use the dock ethernet connection and the tablet's wifi connection at the same time?
I assume this is a limitation of the dock / tablet because if you hook a laptop up you can use the ethernet and wifi at the same time because they have different MAC addresses.
Thanks for any assistance you can provide....

Similar Messages

Imaging Dell Venue Pro 5130s

i'm working on imaging dell venue Pros 5130s. I believe I have everything set up correctly (i'm imaging on a dock) . I get the Checking Media... ipv4 screen that goes past to the ipv6 screen and hangs. i'm on sccm 2012 r2. can u
point me to some logs to check? or have advice?
thanks

just getting back to this. below is my smsts.log. I have not added any extra drivers to my boot image yet.
<![LOG[LOGGING: Finalize process ID set to 768]LOG]!><time="19:06:20.963+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772" file="tslogging.cpp:1495">
<![LOG[==============================[ TSBootShell.exe ]==============================]LOG]!><time="19:06:20.963+480" date="10-06-2014" component="TSBootShell" context="" type="1"
thread="772" file="bootshell.cpp:1055">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="19:06:20.963+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772"
file="util.cpp:964">
<![LOG[Debug shell is enabled]LOG]!><time="19:06:20.963+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772" file="bootshell.cpp:1066">
<![LOG[Waiting for PNP initialization...]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:60">
<![LOG[RAM Disk Boot Path: NET(0)\SMSIMAGES\BOE0002E\BOOT.BOE0002E.WIM]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776"
file="configpath.cpp:302">
<![LOG[Booted from network (PXE)]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="configpath.cpp:317">
<![LOG[Network(PXE) path: X:\sms\data\]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="configpath.cpp:319">
<![LOG[Found config path X:\sms\data\]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:548">
<![LOG[Booting from removable media, not restoring bootloaders on hard drive]LOG]!><time="19:06:20.994+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776"
file="bootshell.cpp:582">
<![LOG[X:\sms\data\WinPE does not exist.]LOG]!><time="19:06:20.994+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:599">
<![LOG[X:\_SmsTsWinPE\WinPE does not exist.]LOG]!><time="19:06:20.994+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:613">
<![LOG[Executing command line: wpeinit.exe -winpe]LOG]!><time="19:06:21.291+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="19:06:31.374+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:942">
<![LOG[Starting DNS client service.]LOG]!><time="19:06:31.374+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:666">
<![LOG[Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="19:06:31.909+480" date="10-06-2014" component="TSBootShell" context=""
type="1" thread="776" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="19:06:31.909+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:942">
<![LOG[==============================[ TSMBootStrap.exe ]==============================]LOG]!><time="19:06:32.049+480" date="10-06-2014" component="TSMBootstrap" context="" type="1"
thread="1096" file="tsmbootstrap.cpp:1165">
<![LOG[Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="19:06:32.049+480" date="10-06-2014" component="TSMBootstrap" context="" type="0"
thread="1096" file="tsmbootstrap.cpp:1166">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="19:06:32.049+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096"
file="util.cpp:964">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL']LOG]!><time="19:06:32.065+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096"
file="resourceutils.cpp:169">
<![LOG[Current OS version is 6.2.9200.0]LOG]!><time="19:06:32.065+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096" file="util.cpp:3094">
<![LOG[Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH]LOG]!><time="19:06:32.065+480" date="10-06-2014" component="TSMBootstrap" context="" type="0"
thread="1096" file="tsmbootstrap.cpp:963">
<![LOG[PXE Boot with Root = X:\]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096" file="tsmbootstrap.cpp:1062">
<![LOG[Executing from PXE in WinPE]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096" file="tsmbootstrap.cpp:1077">
<![LOG[Loading TsPxe.dll from X:\sms\bin\i386\TsPxe.dll]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSMBootstrap" context="" type="0" thread="1096"
file="tsmbootstraputil.cpp:1363">
<![LOG[TsPxe.dll loaded]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tsmbootstraputil.cpp:1373">
<![LOG[Device has PXE booted]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tspxe.cpp:122">
<![LOG[Variable Path: \SMSTemp\2014.10.06.14.27.40.0004.{CFC8720C-E1D8-4E8B-867D-E7A4ED8A7F21}.boot.var]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSPxe" context=""
type="0" thread="1096" file="tspxe.cpp:134">
<![LOG[Variable Key Len: 69]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tspxe.cpp:141">
<![LOG[Succesfully added firewall rule for Tftp]LOG]!><time="19:06:32.096+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="fwopen.cpp:123">
<![LOG[Executing: X:\sms\bin\i386\smstftp.exe -i 10.3.1.178 get \SMSTemp\2014.10.06.14.27.40.0004.{CFC8720C-E1D8-4E8B-867D-E7A4ED8A7F21}.boot.var X:\sms\data\variables.dat]LOG]!
><time="19:06:32.096+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="19:06:32.284+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\i386\smstftp.exe" -i 10.3.1.178 get \SMSTemp\2014.10.06.14.27.40.0004.{CFC8720C-E1D8-4E8B-867D-E7A4ED8A7F21}.boot.var X:\sms\data
\variables.dat]LOG]!><time="19:06:32.284+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\i386\smstftp.exe" -i 10.3.1.178 get \SMSTemp\2014.10.06.14.27.40.0004.{CFC8720C-E1D8-4E8B-867D-E7A4ED8A7F21}.boot.var X:\sms\data
\variables.dat]LOG]!><time="19:06:32.284+480" date="10-06-2014" component="TSPxe" context="" type="1" thread="1096" file="commandline.cpp:827">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="19:06:34.084+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772"
file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="19:06:34.084+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772" file="bootshell.cpp:942">
<![LOG[Successfully launched command shell.]LOG]!><time="19:06:34.084+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772" file="bootshell.cpp:432">
<![LOG[Process completed with exit code 1]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="1" thread="1096" file="commandline.cpp:1123">
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="fwopen.cpp:146">
<![LOG[uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="0"
thread="1096" file="tspxe.cpp:185">
<![LOG[Failed to download pxe variable file. Code(0x00000001)]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="3" thread="1096"
file="tspxe.cpp:185">
<![LOG[PxeGetPxeData failed with 0x80004005]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="3" thread="1096" file="tsmbootstraputil.cpp:1458">
<![LOG[HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1459)]LOG]!><time="19:07:19.474+480" date="10-06-
2014" component="TSPxe" context="" type="0" thread="1096" file="tsmbootstraputil.cpp:1459">
<![LOG[TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap
\tsmediawizardcontrol.cpp,2667)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tsmediawizardcontrol.cpp:2667">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!
><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tsmbootstrap.cpp:1078">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap
\tsmbootstrap.cpp,1226)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tsmbootstrap.cpp:1226">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="1" thread="1096" file="tsmbootstrap.cpp:1238">
<![LOG[hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0"
thread="1096" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context=""
type="0" thread="1096" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0"
thread="1096" file="environmentlib.cpp:553">
<![LOG[Execution complete.]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:693">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell"
context="" type="0" thread="776" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="19:07:19.505+480" date="10-06-2014"
component="TSBootShell" context="" type="0" thread="776" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell"
context="" type="0" thread="776" file="environmentlib.cpp:553">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!
><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="0" thread="776" file="utils.cpp:809">
<![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="2" thread="776"
file="utils.cpp:809">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="2" thread="776" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:725">
<![LOG[Finalizing logging from process 768]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776"
file="tslogging.cpp:1583">
<![LOG[Successfully finalized logs to C:\SMSTSLog]LOG]!><time="19:07:19.512+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="tslogging.cpp:1640">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="19:07:19.512+480" date="10-06-2014" component="TSBootShell" context="" type="0" thread="776"
file="tslogging.cpp:584">

Delete key in on screen keyboard for Dell Venue Pro 8 tablet?

Using Windows 8.1 on a Dell Venue Pro 8 tablet. The software, onscreen keyboard does not have a Delete key. That makes it very hard to do any editing after highlighting a block of text. Hitting the backspace key takes it out of the block edit mode and
just deletes on letter at a time. Anyone know if this is a general Windows tablet problem or possibly some unique to the Dell Venu Pro 8 tablet? I would like to change the keyboard layout to include the Delete key. Also, is there setting so it could recognize
when to capitalize a word? I would think that my Sumsung phone would not have a better software keyboard, but it has a much, much better version in SwiftKey.

I guess you mean the "touch keyboard" ?
There is a "keyboard selector" key in the bottom right hand corner, which allows you to select alternative layouts - have you tried that?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Windows 8.1 randomly freezes and restarts on Dell Venue Pro 11

I have a new Dell Venue Pro 11 with Windows 8.1. It freezes at random times -- on random processes (music, firefox, etc.) -- goes to the BSOD and into a restart. Happens a few random times-- a day; no pattern. Looking through the answers to related
questions seems it comes down to hardware problem (new machine) or reinstall the OS. Correct?

Hi,
To identify your issue, would you please help to post back the minidump file for our research?
Please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled, refer to the step “Configure the dump type” in following article:
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263#method2
Kate Li
TechNet Community Support

PDF files and the Dell Venue Pro

If I have the Dell Venue Pro can I sign a PDF document which has a signature field inserted into it?

Post your problem in the forum for Acrobat SDK.

Installation Problem - Skype for Desktop on Dell Venue Pro 8

I have a new Dell Venue Pro 8. It had the modern Skype app installed out of the factory, but clicking on it made me download the Skype for desktop app. It downloads fine (in looking through the forums, I saw that others had problems with this, but it was fine for me). The problem comes when it's installing. Skype brings up the "Installing Skype" window. The problem is that it takes up the whole screen. I can do what I need to with the "Select your language" drop-down menu, but there is nothing that lets me go to the next screen. I see no "Next" or "OK" or anything like that to use to continue the installation process. I cannot resize the window. Maximize and minimize are the only options. "Move" and "resize" are grayed out. Thank you for any ideas!

Try to install the currently latest Skype 7.7.0.102 version using this installer: http://download.skype.com/msi/SkypeSetup_7.7.0.102.msi

"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!

"Unable to Connect" using Firefox and Windows 7. Have tried all the suggestions on this website to no avail. I need firefox for my work! Please help!
== This happened ==
Every time Firefox opened
== Since I downloaded Firefox

same here my AV is ESET, i already unblock it but no use can't connect to the internet..

Projector works on Dell Venue Pro 11 tablet?

Hi there
I am trying to run a director 11.5 windows projector (made on a mac) on Dell Venue 11 Pro tablet (win 8.1/1920x1080/baytrail CPU) and am having problems with "alignment" on the screen. The 1920x1080 movie seems to be loading but fills only about 60% of the screen. You can see the desktop through the other 40%. It appears that the movie (at normal size) has been shifted up by 250 pixels and to the left by 400 pixels and is playing. So you are seeing the desktop through lower "SW" portion of the screen.
This particular movie ran fine on a microsoft surface pro tablet a few months ago (no access to that projector file, I republsihed). Unfortuntately I do not have access to that surface tablet anymore. I am wondering if there is a problem with the integrated graphics hardware and/or the processor in the dell. The venue has the new baytrail processor and integrated intel graphics. The surface pro has an i5 processor.
Thanks in advance for any help.
AK

Made some other windows projectors (on the mac) with the following results and run on the dell venue tablet.
(1) 1600x900 - similar problem with only part of screen showing
(2) 1280x720 - projector seems to be working and displaying properly. The projector image is scaled to fill the full 1920 screen width.
I am beginning to think that there is a problem with the intel integrated graphics hardware. I should add that the problem I am having also occured a few months ago when I tested a similar projector with a acer iconia w3 tablet (8 inch screen/windows 8.0/1280x800/atom Z2760 CPU/intel Graphics Media Accelerator HD hardware).
I hope that problem has a solution, hopefully coming as a director 11.6 upgrade and director 12.1 upgrade. I think this combination of cpu and graphics hardware is a going to do pretty good business.

Skype on Dell Venue Pro 8

I have a tablet Dell Venue 8 Pro. it defaults to the rear camara. I tried installing a new version, changing camaras, nothing works. I didn't have this problem 5 months ago. It just started this month. The only use I have for this tables is skype ( as I'm very iliterate when it comes to computers ) Please help, how can I change so I can have a face to face conversation. ( why this happen? anyone knows?)Thanks

Try to install the currently latest Skype 7.7.0.102 version using this installer: http://download.skype.com/msi/SkypeSetup_7.7.0.102.msi

Macbook Pro 10.7.5 internet will not work. HELP!!! Ethernet and WIFI both say connected but still no internet.

I have a macbok pro running 10.7.5. My internet has always worked on it but I decided to try changing my router set up - the set up didn't work so I reverted back to the original setup that had previously worked.
Now, I have an Imac running tiger - I can connect to the internet via WIFI or Built In Ethernet with no problem.
When I try to connect to the internet on the Macbook Pro running osx 10.7.5 my internet will not work
Safari Says (You are not connected to the internet) and Google Chrome says (Page is Unavailbe) and lists some trouble shooting options that I tried.
When I go to System prefrences > Network my WIFI and Ethernet both say "Connected" and have a green light next to them.
I have tryed deleting the connections and starting new ones and I have even tried deleting the Location and starting a new one.
Nothing works - no matter what I do, even know the WIFI or ETHERNET says Connected, the internet will not work on the Macbook Pro.
The Internet works fine on my Imac and I have tried everything such as swaping cables but there doesn't seem to be a problem with my internet
or with my router - it all works fine with my Imac running Tiger.
Can anyone help me get my internet working on my Macbook Pro again? Any ideas?

Hello ASGR.SYS amd WahWar,
I tried both of your suggestions and neither of them worked.
ASGR SYS - When I tried it your way i got a message saying that the that the diagnostic couldn't repair the problem. It shows the thw WIFI, WIFI SETTINGS, NETWORK SETTINGS, ISP, all turn green. But the Internet and Sever stay red. The thing is, there is nothing wrong with my internet connection as I can connect to the internet on my Imac running tiger, both through ethernet and wireless. When I go to System Prefrences and Ntwork the WIFI and ETHERNET both say "Connected" even know I can't veiw any websites.suggestion
When I tried WAHWAR's suggestion I get a message that says cannot connect to the WIFI network and then it lists your typical trouble shooting tips. Like Make sure you entered the right password and make sure you are in range of the wireless network
Again, just to confoirm - My internet connection is working fne both the WIFI and the Ethernet. When I use it on my IMAC running tiger, everything connects as it should and it works perfectly. But when I try to connect with the MacBook Pro, Even know the connections in the Network settings window show up as "connected" the MacBook still seems to think that my internet connection isn't working at all.
I have tried creating new connections, creating new locations, and I have even gone as far to reset my router and start completely from scratch. The result so far has been the same - the IMAC running tiger will connect - my blackberry and iphone will connect - but the macbook pro running lion will not connect..
I'd apprechiate any other suggestions

Blackberry Desktop on Dell Venue Pro 8 Tablet Questions

I have read that it is possible to use Blackberry Desktop with Windows 8 & 8.1. And I have read that Blackberry Desktop works with any version of Outlook other than 2013. I have been told by Microsoft that I can install any version of Outlook older than 2013 onto a Windows 8 or 8.1 device. HAS anyone out there done this. I really like my Torch 9800 and wish to be able to use it with the new Dell tablet. OR does anyone have any other inexpensive tablet ideas.

Hello,
Some clarifications to resolve what you "have been told" versus what is accurate...
FlyHolst wrote:
I have read that it is possible to use Blackberry Desktop with Windows 8 & 8.1.
http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
Note carefully that it states very clearly Windows 8...not 8.1
FlyHolst wrote:
And I have read that Blackberry Desktop works with any version of Outlook other than 2013.
KB12268 Synchronization support for BlackBerry Desktop Software for Windows
FlyHolst wrote:
I have been told by Microsoft that I can install any version of Outlook older than 2013 onto a Windows 8 or 8.1 device.
We can neither confirm nor deny what MS may or may not have told you.
FlyHolst wrote:
HAS anyone out there done this.
Not me...but perhaps someone else...then again...
FlyHolst wrote:
I really like my Torch 9800 and wish to be able to use it with the new Dell tablet. OR does anyone have any other inexpensive tablet ideas.
Please re-read the above system requirements page...I'm not at all sure that the Desktop Software is compatible with any tablet at all...but you need to compare your gear against what the Desktop Software supports.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Info Dell Venue Pro/ unlocked

Hi!
Have some questions:
1. Do you know if this phone can be used as hotspot (so I can have access to internet for other devices through this phone)?
2. I have a sim card from Mexico - telcel, here it uses at&t to have service, does this phone work with my sim card?
Thank you for your help!

Hi,
How about your problem now? Could your computer find other WIFI signal? If not, it is probably driver or hardware problem.
Firstly, please try to reinstall Wireless Card driver for test.
Secondly, if problem persists, you may need to contact Dell for further assistance.
Roger Lu
TechNet Community Support

Where to find Model Number on Dell Venue Pro 11

I am trying to figure out if my tablet will support dual monitors but I need to find the model number (box was thrown away long time ago). Where can I find the model number?

Do you mean the model number or the serial number? Both are available in the "More Info" link within "About This Mac" (on the first tab, "Hardware"). You can also find the serial number under your battery.
Matt

Pro*C/C++ Precompiler Error when using OTT and CODE=CPP

I am trying to precompile a Pro*C application for the company I am working.
Generating Include file and Intype file with OTT succeeded.
But invoking the Pro*C precompiler results in error messages concerning
the processing of the "size_t" structure being involved by including
the file "oci.h" in the OTT-generated Include file. This file in turn
seems to include "ociextp.h", "ociapr.h", "nzt.h" which cause the
precompiler to complain: (i translated some terms to english)
proc code=cpp cpp_suffix=cc intype=diacron.typ
'sys_include=(/u01/app/oracle/product/8.1.7/precomp/syshdr,
/usr/lib/gcc-lib/i486-suse-linux/2.95.2/include,
/usr/include/g++,/usr/include,/usr/include/linux)'
iname=transact
Pro*C/C++: Release 8.1.7.0.0 - Production on Mi Jan 30 12:04:34 2002
(c) Copyright 2000 Oracle Corporation. All rights reserved.
System-Defaultsettings from: /u01/app/oracle/product/8.1.7/precomp/admin/pcscfg.cfg
Syntaxerror in Line 233, Col 50, File
/u01/app/oracle/product/8.1.7/rdbms/public/ociextp.h:
Error in Line 233, Col 50, in File
/u01/app/oracle/product/8.1.7/rdbms/public/ociextp.h
dvoid ociepacm(OCIExtProcContext with_context, size_t amount);
.................................................1
PCC-S-02201, Found Symbol "size_t" when expecting one of the following:
... auto, char, const, double, enum, float, int, long,
ulong_varchar, OCIBFileLocator OCIBlobLocator, OCIClobLocator,
OCIDateTime, OCIExtProcContext, OCIInterval, OCIRowid, OCIDate,
OCINumber, OCIRaw, OCIString, register, short, signed,
sql_context, sql_cursor, static, struct, union, unsigned,
utext, uvarchar, varchar, void, volatile,
a typedef name, exec oracle, exec oracle begin, exec,
exec sql, exec sql begin, exec sql type, exec sql var,
Das Symbol "enum," ersetzte "size_t", um fortzufahren.
........the above several times for the other files.............
My pcscfg.cfg looks like:
===============================================================
include=/u01/app/oracle/product/8.1.7/precomp/public
include=/u01/app/oracle/product/8.1.7/oracode/include
include=/u01/app/oracle/product/8.1.7/oracode/public
include=/u01/app/oracle/product/8.1.7/rdbms/include
include=/u01/app/oracle/product/8.1.7/rdbms/public
include=/u01/app/oracle/product/8.1.7/rdbms/demo
include=/u01/app/oracle/product/8.1.7/network/include
include=/u01/app/oracle/product/8.1.7/network/public
include=/u01/app/oracle/product/8.1.7/plsql/public
include=/u01/app/oracle/product/8.1.7/otrace/public
include=/u01/app/oracle/product/8.1.7/ldap/public
include=/home/wilf/lib/include
ltype=none
parse=partial
==============================================================
And the beginning code in the file transact.pc looks like:
==============================================================
#include "sqlnet/transact.hh"
EXEC SQL BEGIN DECLARE SECTION;
#include <stdio.h>
#include <stdlib.h>
#include <sqlca.h>
#include "diacron.h" //generated by OTT
int id;
varchar szenario[20];
char username="***********";
MYTYPE *MyPtr;
EXEC SQL END DECLARE SECTION;
Transaction::.....several class encodings..........
Transaction::.....several class encodings..........
=============================================================
By the way, i figured out so many different settings and
alternative code placements now, I satisfy all guidelines of
the Pro*C-Programmers Guide, but I don't get that stuff running!
I'd appreciate any help!
Regards,
Wilfried

When I first ran into this problem I scoured this forum and found the usual suspects (add the proper path to the pcscfg file by doing a "find /usr -name stddef.h -print"). Assuming that you did this and changed the reference from Suse to your distribution you can move to the next point.
I did this and still ran into problems. It turns out that with my distribution and version (Mandrake 8.1), I needed to reference the egcs version of these includes which were not installed by default. I needed into install the egcs packages. After this I had two references to stddef.h in my usr/include path. One was quite obviously the egcs version. I needed to use that one. It cleared up the problem.
[jflynn@CN83845-A /]$ find /usr/lib -name stddef.h -print
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/2.96/include/stddef.h
/usr/lib/gcc-lib/i586-mandrake-linux-gnu/egcs-2.91.66/include/stddef.h
so I modified the pcscfg file as:
sys_include=(/usr/include,/usr/lib/gcc-lib/i586-mandrake-linux-gnu/egcs-2.91.66/include)

I recently purchased a MacBook Pro and transferred data from my MacBook via Ethernet cable. I did not consolidate my accounts and kept using my MacBook. Can I update the data transfer now using Ethernet and can I consolidate my accounts?

I recently purchased a MacBook Pro and transferred data from my MacBook using Migration Assistant via Ethernet cable. I was confused about consolidating my accounts, so I continued to use my old MacBook. Can I now update the data transfer using the same process and begin using my new MacBook Pro exclusively? How do I consolidate my existing accounts?
Thank you.

Of course. It does everything it did before Yosemite. You just won't be able to send or receive SMS messages with it.

Dell Venue Pro 11 w/Dock / Unable to concurrently use ethernet and wifi?

Similar Messages

Maybe you are looking for