Delta between WAS 6.20 and WAS 6.40

Hi,
I'm trying to understand the difference between a WAS 6.20 and a 6.40 installation.
Are there any delta-documents available with an overview of additional functionalities/changes?
Are there any restrictions for migrating to a WAS 6.40: f.i. does a SAP CRM 4.0SP9 installation run on a WAS 6.40?
Will the upgrade impact the CRM applications/middleware?
Where can I find this information myself?
Thx in advance & kind regards,
Michael.

Hi,
There is a link in it with release notes though: http://help.sap.com/saphelp_nw04/helpdata/en/2b/64fc3e9d3b6927e10000000a114084/frameset.htm
and
http://help.sap.com/saphelp_nw04/helpdata/en/de/c8fe3e432fd861e10000000a114084/frameset.htm
Eddy

Similar Messages

How can I calculate the delta between 2 cursors on an xy graph

I have an xy graph with two sets of cursors: cursor0 and cursor1. I want to calculate the delta between cursor0 y position and cursor1 y position. I have created a cursor y position property node that gives me the y position of cursor1, but how do I get the y position for cursor0? There does does not seem to be any mechanism for selecting which cursor the property node references.
Thanks
John

There is a more rapid solution : you can read all the cursors attributes in a single property node call, then extract the info you need, as shown in the attached picture.
Message Edité par chilly charly le 08-29-2005 09:24 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left...
Attachments:
Example_BD.png ‏2 KB

Difference between BI 7.0 AND BW 3.5

BI 7.0 AND BW 3.5

hi kashi
u could have searched forum with u r question
anyway go thru following links
<b>/community [original link is broken]
Difference in Delta between BW 3.5 and BI 7.0
/message/2927917#2927917 [original link is broken]
How much difference between BW 3.5 and BI 7.0?

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

In latest version of MF there`s missing button, which was in previous version: between buttons back/forward and the typing bar there used to be little flash, which showed few last pages I have just browsed. How can I restore it?

If you mean the drop marker then you can still get the History of the Back and Forward buttons if any by either Left-Click and hold for a second or by Right-Clicking them.
If you still want the drop mark there also then there is this Extension at https://addons.mozilla.org/en-US/firefox/addon/backforward-dropmarker/
Also the abbreviation for Firefox is '''Fx'''

I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad an

I am trying to link coc between a new ipod and my iPad. The iPad was the old device. I did as I was supposed to by logging in the Game Center, then opening coc, and went thru the tutorial. The Game Center keeps trying to load the new village on my iPad and not the other way around. It basically is trying to make my old village the new village, meaning I lose a lot of progress. How do make it combine the 2? If I cannot, is there a way to remove the new village off the Game Center and add the one I want to be saved? Thank you.

You'll have to contact the app developer for help with this.

The cable between the logic board and the 3G board was removed can I convert it to a Wifi only?

I have a Ipad 2 3g. someone detached the cable between the logic board and the 3G board can I convert it to a Wifi only?

The ipads that have 3g have an extra section attached to the logic board by a glued on wire. I bought this at a tag sale. Someone was apparently trying to repair their iPad and they did not know that when you removed that glued strip attaching the 3g antenna to the logic board you would never be able to re-atach it again later. So basicaly my 3g logic board is now in two pieces. the main logic board with wifi and the cdma 3g antenna. Now their is no differnce between the logic boards in either wifi only or wifi and 3g devices. I attempted to restore the device with the ios for wifi only, because there are 3 different ios versions depending on if you have wifi only wifi 3g with SIM card, or wifi 3g cdma.

Difference between WAS and Netweaver

Hi Experts,
In Web Application Server (WAS) we have ABAP+JAVA combindly. But in Netweaver Why JAVA and ABAP stacks are separated. What is the difference between WAS and Netweaver?
Thanks in advance,
Manoj

Hi Manoj,
Netweaver is the technology plattform of SAP.
WAS is a component included in Netweaver plattform.
Further information:
Difference between WAS/NetWeaver/Enterprise
Re: Need clarification for these names, R/3, WAS, NetWeaver
Hope that is helpfull.
Carlos

I was just wondering when i turn my phone on it flickers between the home screen and the apple icon any ideas how to fix it ??, i was just wondering when i turn my phone on it flickers between the home screen and the apple icon any ideas how to fix it ??

i was needing someones advice on how to fix my iphone4 when i turn it on it flicks between the home screen and the apple icon

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

PowerPoint 2010 arrows in series lines was displayed reversely between the edit mode and the slide show

I encounter a strange problem with the column chart in PowerPoint 2010 (or maybe the combinations of Excel 2010 and PowerPoint 2010). The directions of the arrows in Series Lines display in the reverse direction between the edit mode and the Slide
Show.
Here are the steps to recreate this phenomenon:
Open a new Presentation > Insert > Chart > Column > Stacked Column > Press OK
Excel pops up. Close Excel and return to PowerPoint.
Click on the chart > Layout > Lines > Select "Series Lines"
Right click on the lines and select "Format Series Lines"
Line Style > End Type > Choose "Stealth Arrow"
(well, could not paste an image yet... arrows display like <--)
When F5 was pressed (Slide Show)
(well, could not paste an image yet... arrows display like -->)
If you look closely at the directions of the arrows, they are display in the reverse directions. Anyone is having the same issue?
Thanks!
Chen

Hi，
Based on my tested both of the PowerPoint 2010 and
PowerPoint 2013, I reproduced the issue in my environment.
If I choose the End Type> Stealth Arrow(---->), it showed "<-----" in "Normal mode", but showed the "---->" in "Slide Show mode". It seems display correctly in "Slide Show mode".
We have definitely heard your frustration, and we're thinking about ways to make this scenario work better for our customers. Please wait for the issue is fixed. Thanks.
Regards,
George Zhao
TechNet Community Support

Secure Communication between SAP R/3 and SAP portal(WAS Java)

Hi All,
We have a requirement where client says ,there needs to be a SSL tunnel established between SAP R/3 and Portal(through ITS) to access R/3 through portal
Do we have to use SSL for that or SNC?I heard SNC is a mechanism which have to be used here since it uses DIAG protocol to connect but not Http.Is it true?Kindly give some more ideas on this.
Other thing is to do this they need to open a port between for using Firewall.Can you guide which SAP port has to be open for this connection?
Thanks In Advance
Regards
Rani A

Hi Rani,
what the ITS Admin is, is explained in the docs to the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/28611e0bd26493e10000000a1553f7/frameset.htm">ITS Admin Tool</a>. This also includes how to access it.
Usually specifiying the ABAP backend is done by maintaining the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2b67fe369b060ae10000000a155369/frameset.htm">Global Service File Parameters</a>.
The <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2aa8081a3a060ae10000000a155369/frameset.htm">SNC configuration</a> is part of the <a href="http://help.sap.com/saphelp_nw04/helpdata/en/44/2a95a61a3a060ae10000000a155369/frameset.htm">Security Configuration</a> and also done in the ADM instance of the ITS.
Regards,
Patrick

Basic difference between WAS and Netweaver

I justwant to a know a basic fundamental question. What is the basic difference between web application server and Netweaver. I am always geting confused in these two terms. Can anybody please explain?

Hi,
NetWeaver is:
An application and integration platform that unifies people, information and business processes
New technical foundation for all future SAP applications
A replacement for BASIS framework
A platform that is based on Enterprise Services Architecture (ESA); SAP hopes to release future product offerings in compliance with ESA
NetWeaver is NOT:
A product or a language
A replacement for SAP R/3!
A marketing strategy
The SAP Web Application Server is the technical platform for SAP NetWeaver, providing the complete infrastructure to develop, deploy and run all SAP NetWeaver components, the mySAP Business Suite, customer- developed applications and 3rd-party J2EE 1.3 compliant applications.
SAP Web AS fully supports both the proven ABAP technology and the open source internet-driven technologiesJava and Java 2 Enterprise Edition, also called J2EE.

Delta between Business Connector 4.8 and 4.7

This seemed like the most logical place to put my post so here it goes..
We are assessing our options for replacing/upgrading existing Business Connector installations that will shortly be out of support (OSS Note 571530).Whilst researching our options I have come across OSS Note 1094412 which describes a new version of 4.8 becoming available in July 2008.
Information on BC4.8 is virtually non-existent on the web - can anyone provide me with details of the delta between 4.7 and 4.8, licensing structure, hardware requirements, support/maintenance strategy and ease of migration from 4.6/4.7 to 4.8?
As an aside it is very interesting that SAP has chosen to provide BC 4.8, presumably to ensure BC can continue to runs on supported O/S' and Java environments, when SAP XI/PI is being touted as the de facto integrator for companies with a significant SAP presence. Maybe customers are not quite as keen to move on/remove their BC instances as SAP would hope...

Hi Daniel,
We have been on this topic for years (some vested interest through product development).
What seems to have happened, from what we can gather, is that Netweaver XI/PI uptake hasn't happened as fast as initially hoped (SAP was looking at an intial end of life of Dec 2004 for BC).
The case is quite simple. BC is free, easy to install and maintain. XI/PI, new product, takes a while to stabilize, much more feature rich, but at the same time more complex and less performing (and did I mention the license cost?).
What we know about BC 4.8 and this is purely based on talking to people and reading about it, we have not seen / tested BC 4.8 ourselves - Mainly a platform upgrade, no significant changes. Most likely free as well (the original contract states that if SAP charges money for BC they have to pay extra to Webmethods / Software AG) accordingly. I would expect to see a few new built-in function and hopefully some hooks into standard SAP monitoring tools.
I think you hit the nail on the head. We have seen customers panic and move to non-Netweaver platforms from BC to be on a supported solution (back when EOL was imminent before 4.8 was released). Why non-Netweaver? Because many customers use non-SAP Integration Products as well and they tend to drift to known solutions instead of trying to manage the risk of migrating to a unfamiliar product.
I would not expect any major changes that would make migration to 4.8 hard. If there would be some major issues then that would signal some significant developments from SAP and that would be a strange thing at this point of the product lifecycle.
End of life for BC 4.8 is in 2012 or thereabouts if I remember correctly, this was part of some note which was released/updated towards the end of last year.
You might want to make some design calls if you continue developing your integration scenarios on BC. The best format to allow for an easy / relatively painfree migration to PI one day is by using BC graphical MAPS where possible, NOT XSL maps as wrongfully indicated in so many previous posts and articles. XSL is the hardest format to migrate to PI even though it might look superficially as a compatible format...
Cheers
Kalle

Delta functionality between SAP 4.7 and ECC 6

Hi All,
Can anyone please provide me with any documents or links on delta functionality between SAP 4.7 and ECC 6.0 in MM/WM.
Any information would be helpful.
Regards
Prashant

Hello
Following are the basic differences as far as MM Module is concerned;
Pickup list - Batch where-used list display in transaction MB56
u2022 Until release 4.7, the top-down and bottom-up analyses in the function pickup list for batch where-used list (transaction MB5C) were displayed only in the form of simple output lists. As of release 6.00 of SAP ERP Central Component, the function pickup list for batch where-used list branches to the batch where-used list itself (transaction MB56).
u2022 In addition, user can define how the data in the batch where-used list is displayed, in the initial screen.
u2022 User can use all the settings available in the batch where-used list. For example, he can expand transfer posting or display vendor batch. However, it is not possible to limit the selection to valid plants in the initial screen of the pickup list.
Usability enhancements for transaction MIGO for the posting of goods movements
u2022 For goods movements that refer to purchase orders as reference documents (for example, goods receipt, goods issue, subsequent adjustment), user can specify the ordering plant as an additional selection criterion directly next to the purchase order number and the item number.
u2022 There is a new default value: "copy account assignment fields." When entering other goods receipts, user can copy existing account assignment data from the previous item to use as the default values for a new item. To do this, user has to set the copy account assignment fields indicator in the default values.
u2022 User changes the default values in the menu path "Settings -> Default Values."
u2022 Goods movement is monitored with reference to a material document. When you enter the following goods movements, it is possible to specify a material document, such as the following, as the reference document:
Goods receipt
Goods issue
Transfer posting
Remove from storage
u2022 Note that these material documents must be documents that have arisen from a goods movement without reference ("Others") and that are not reversal documents.
New report : display list of invoice documents (MIR5)
u2022 Logistics invoice verification offers a new report display list of invoice documents (RMMR1MDI), w hich user can use to display such a list (Transaction is MIR5).
u2022 As an addition to the existing program invoice overview (transaction code MIR6), user have extended selection criteria and display options. For example, on the initial screen user can make selections by one-time customers, invoice gross amount, and entry date.
u2022 User can also show an expert mode, which enables him to select at plant level by FI document, GL A/c posting, and Material Posting.
u2022 In the output list, the report shows both posted and held invoices.
u2022 It does not show invoices without a corresponding FI document; such as invoices planned for verification in the background or which the software has already verified as containing errors.
Requirement prioritizations in materials management
u2022 With Requirement Prioritization functionality user can assign requirement urgency at item level in purchasing and reservation documents.
u2022 The software determines the relevant requirement priority (overall priority) of a material requisition from the combination of requirement urgency group and organizational priority.
Mass maintenance of outline agreements
The following two transactions available:
u2022 Mass maintenance for contracts: transaction code MEMASSCONTRACT
u2022 Mass maintenance for scheduling agreements: transaction code MEMASSSA
Commitment plan for purchase contracts
u2022 With the function of the commitment plan for purchase contracts, it is possible to pre plan value consumption for a purchase contract.
u2022 To this end, a commitment plan is generated for each document item of the relevant contract.
u2022 This commitment plan itself can have any number of items.
u2022 User can define a value and a validity date for each commitment plan item.
u2022 This enables user to pre plan different values for different periods of time.
u2022 The software generates an earmarked fund document for a defined commitment plan item.
u2022 This earmarked funds document can in turn contain several different items with different account assignments.
u2022 The software adopts these account assignments from the item account assignments of the commitment plan.
u2022 If a purchase requisition or purchase order references this contract, the earmarked funds document is copied into the purchase order, and the account assignment is adopted from that document.
u2022 Account assignment to a different account assignment object is then no longer allowed.
Availability check in "Enjoy purchase order and requisition"
u2022 Display and checking of availability are invokable separately in the "Enjoy purchase order and requisition" function, in line with the software behavior on the sales side.
u2022 User invoke the display and checking of availability in the "Enjoy purchase order" function (transaction code ME21N) and the "Enjoy purchase requisition" function (transaction code ME51N) as follows:
To display the availability overview, choose the menu path "Environment -> Availability." - To check availability, choose the "Check Availability" icon.
Until this release, if user carried out the availability check for an item of a stock transport order, the software adopted confirmations as per the desired date/time only.
u2022 Two settings are possible with availability check:
Confirmation as per desired date/time (this is the standard setting and corresponds to previous software behavior)
Delivery proposal - Full confirmation
External services: putting service items in the purchase order on hold (changed)
User can put purchase orders with service items on hold if these items do not contain any errors. Purchase orders with service items can also be put on hold if errors occur only at header level or as a result of the availability check.
Customizing transactions OX18 replaced by view
The assigned customizing transactions have been replaced by the following view in the following implementation guide activity in customizing for the enterprise structure: Assign plant to company code: transaction OX18 replaced by view V_T001K_Assign. One will find this activity in the implementation guide under the menu path "Enterprise Structure -> Assignment -> Logistics General -> Assign Plant to Company Code."
Goods receipt: new movement types in inventory management
The following new movement types are available in inventory management:
107: Goods receipt to valuated goods receipt blocked stock
109: Goods receipt from valuated goods receipt blocked stock
Prepayment of invoices
This functionality is characterized as follows:
u2022 User can trigger prepayment of vendor invoices in logistics invoice verification.
u2022 User use the prepayment function for vendors with whom organisation has a good, long-standing relationship.
u2022 The function enables payment soon after issue of the invoice and full exploitation of the date of required payment and existing cash discounts, by posting the vendor liabilities, taxes, and cash discounts in financial accounting in advance.
u2022 The software executes the payment of the invoice regardless of the relevant goods receipt and the outcome of the invoice verification check.
u2022 Most logistics invoice verification standard functions are not affected by the prepayment function.
u2022 When the software posts invoices, it continues to execute the standard checks.
u2022 If the software has already posted the prepayment document, user can make only restricted changes to the header fields of the invoice.
u2022 To ensure adequate and orderly financial accounting postings, a prepayment clearing account has been added to SAP ERP Central Component.
u2022 Upon prepayment, the software debits this account and then settles the account again after executing the check.
Purchasing accounting information to the former SAP Business Information Warehouse
u2022 With the transfer of the purchasing account information to the former SAP Business Information Warehouse component (whose functionality is now part of SAP Net Weaver), it is now possible to maintain Info Cubes, reports, and queries that can determine how and where the costs from purchasing documents have been assigned and controlled.
u2022 As part of the software, a new data source (2LIS_02_ACC) has been created and the purchasing extraction process extended to cover the account information for purchasing orders, schedule agreements, and contracts.
Automatic settlement of planned delivery costs with evaluated receipt settlement (MRDC)
u2022 A new report (RMMR1MDC), available within the logistics invoice verification, can be used to automatically settle planned delivery costs.
u2022 To invoke the report, from the SAP easy access screen, choose the menu path "Logistics -> Materials Management -> Logistics Invoice Verification -> Automatic Settlement -> Automatic Delivery Cost Settlement" (transaction code MRDC).
u2022 Functionality for report RMMR1MRS is enhanced.
u2022 User can use the report RMMR1MRS, "Evaluated receipt settlement with logistics invoice verification (LIV)" (transaction code MRRL), to settle planned delivery costs in addition to goods and service items within logistics invoice verification.
u2022 To do so, set the relevant indicator on the initial screen of the report.
Parking service items
It is now possible to put service orders without errors or with commitment errors on hold.
Report MB5B : Stock on Posting Date
u2022 This Report is available with "Non-Hierarchy" display option which provides details of Opening, Receipt, Issue and Closing balances of Stock with quantity and value both for a given period.
u2022 This functionality is not available in Release 4.7.
Stock Transfer Between Storage Locations
u2022 Function of stock transport orders between storage locations is available from ECC 6.0 onwards.
u2022 As a result of which user can input issuing storage location with supplying plant.
u2022 Facility of using different delivery types for different issuing storage locations is available.
u2022 Shipping Point data can also be determined based on the issuing storage location.
If u want to know more go through the following links
http://solutionbrowser.erp.sap.fmpmedia.com/
http://help.sap.com/saphelperp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/frameset.htm_
https://wiki.sdn.sap.com/wiki/display/ERP6/ERP2005+Upgrade
check following
http://help.sap.com/bp_bblibrary/500/html/U40_EN_IN.htm
for more help check following
http://help.sap.com/bp_bblibrary/500/BBlibrary_start.htm
Go through the following link for the Delta functionality notes
http://solutionbrowser.erp.sap.fmpmedia.com/
Regards
Priyanka.P

Delta between ORACLE 8.0.5 and ORACLE 8.0.6

I am looking for information that outlines the major differences (bug fixes, enhancements) between ORACLE 8.0.5 and 8.0.6.
THanks Joerg
null

We are running oracle 8.0.5 on a thru64 unix system. Now one of
our software suppliers demands us to install oracle 8.1.5. Not a
big problem, but i want to know the difference between oracle
8.0.5 and 8.1.5. The difference between 8.0.5 and 8.1.5 ?
For this I had to write a whole a book,
there are a lot of new features and enhancements.
But why to do you need to install 8.1.5 ?
Is there no 8.1.7 on thru64, because 8.1.5 is the first of 8i and
there are some important bugs.
So do yourself a favour and use the latest version.
Regards,
Thomas

Delta between cube and ods

I have existing deltas between ods into cube.
Now, new deltas into cube are failing for lack of init!
A new init is not possible from ods to cube, because there is already one in infopak.
Problem is "The data mart status on the ods is empty."
I need help in setting this datamart status to being init done, is there an table fix?
What tables are involved in this ?
Thanks
Gopi

RSDMDELTA table stores the datamart status of requests.

Delta between WAS 6.20 and WAS 6.40

Similar Messages

Maybe you are looking for