Delta Loads are not working: 0FI_GL_10 With enhancement : HR Data in source

Hello Friends. Thanks for your answer on theory which I know, Please help me with this situation. I read all the sdn response to my message and have below for your suggestion
QUES1: Why the 0RECORDMODE is not coming in Standard DSO and hence it is not there in Transformation in between Infosource and DSO. What do I need to include 0RECORDMODE in standard DSO. What is the correct OSS to Implement on SP 10 to solve this.
Ques2. As suggested by you If I run the Delta loads after waiting for 1 hour of Init load. say init load was done at 11 am . i will do the delta at 12:10 am to psa via Infopack and then wait for an hour to run the DTP from PSA to DSO. Delta Records come in but it also bring in the records in DSO that are not changed from about 7 hours in ECC. and make our total Balance incorrect.
Ques3: We have this Cocatenation of Keys in DSO since we exceeded the total number of 13 key in DSO.
Cocatenation#1 GL ACCT and CHRT OF ACCTS
Cocatenation#1 SEGMENT AND CONT AREA
Cocatenation#1 Version, Value Typem, Valuation view, Currency Type.
<b>
Since business want to include HR Data in Keys Like Employee Number, Emp Code, EMPSPIMCODE. Payroll ID and I can not remove these fields from Key in DSO as per the business.</b>
Also the above fields GL ACCT , CHRT OF ACCTS, SEGMENT, CONT AREA
exist in Data FIELDS OF DSO. so what are the steps to modify the design to fix this asap.
Please email me at [email protected] if you have any docs to resolve the above
Thanks
Soniya
null

Did the full load bring all records from sourcesystem to PSA?
Was this an issue with the first delta you have tested ?
Concatentaion of multiple keys into one should not be an issue here as that must have been happening in DSO and delta brings incorrect records to PSA itself.
Are you validating delta records against FAGLFLEXT inputing the timestamp value or RSA3 ..how ?
<b>Check if this note helps</b>
Note 1002272 - NewGL-DataSource 0FI_GL_10, 3FI_GL_*: Missing record.
Is delta bringing incorrect records to PSA or DTP brings incorrect records to DSO from PSA ?
May be you should revisit the logic behind for the enhancement of 0FI_GL_10.
I am facing a similar issue as well but here delta doesnot even bring a single record ( ODS has 20 keys )...will update if resolves and you do the same.
Message was edited by:
Jr Roberto

Similar Messages

Middleware - Delta load is not working from CRM to R/3

Hi Experts,
Our client is using SAP-R/3 4.7 and CRM 5.0
Connectivity was established via Middleware and initial load of Customizing objects and Master data( Customer and Material) was finished successfully.
Now if i create any Customer or Product in R/3 they were replicating to CRM(Delta load), but this delta load is not working in CRM to R/3 direction.
In CRM Administration console( Transaction code - SMOEAC) R/3 site was maintained and subscribed for Publications - All Business Partners, All Business Transactions and All Business partner Relationships.
Can anybody help me out that why Delta load is not happening from CRM to R/3 Direction.
Thanks in advance
Nadh.

Hi Nadh,
for BPs check PIDE settings once agiain, i hope u ve already downloaded all mandatory obects for BP, because u already told that replication from r/3 to crm is ok, so check once again PIDE settings (CRM to R/3),
for Products u ve to manual upload only
for Products
This may be necessary because the data is required in the OLTP System for a number of logistical processes such as procurement, inventory management, billing, financial accounting, controlling.
cheers
Ranga

Scrolling effects in Muse are not working properly with the Chrome browser at the moment.

My scrolling effects in Muse are not working properly in the Chrome browser .I disabled any third party widgets to see if that was the problem but it wasn't. Safari and firefox presented my site perfectly but when it was opened in chrome the menu navigation bar will not stop moving uncontrollably jittering when the page is scrolled. Does anyone know what I can do to fix this? My site is danieltoruno01.businesscatalyst.com

We are using Vertical spry menu bar features provided with Dreamweaver CS3.
You are using Spry 1.4.
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4.
When using Dreamweaver CS3 (uses Spry 1.4), it's wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
If after that you still have problems, please come back here.
Ben

Aiport Extreme and Airport Express are not working together with DSL

My 2wire modem failed and I have replaced it with a basic actiontec dsl modem. I have my airport extreme connected to the actiontec via ethenet cable. All is working. Internet access through the actiontec is working and internet access through the extreme is working. What I cannot for the life of me remember how to do is get my express to work as a range extender for airport extreme.
The extreme is set up in Ethernet not PPPoE mode which might be the issue, but I can't remember the right settings (IP ranges, etc) if I set it up in PPPoE mode.
Net - my network that was working DSL modem to Extreme to Express as a range extender no longer works at the Express end. And don't even get me started about AT&T tech support. Help smart guys/girls out there - I know this is something simple that I should have written down when I first set up my network...

shakeelium wrote:
Good People,
I have an Airport Extreme serving as my wireless router with an external hard drive connected to it. I also have an Airport Express in another room connected to a stereo for Airplay. Neither can be found on the Airport Utility (v5.5.3), but wireless internet still works. This happens often, with both reappearing in Airport Utility for short amounts of time periodically.
I've once had the same problem.
The reason for that issue is the frequency (radio band) hopping of the station.
On your AP-Extreme
Enter the manual setup
Disable Guest Network if not desperately needed
Set a dedicated name for the 5GHz wireless (wireless -> wireless options)
Eventually change the radio mode (if no 802.11b/g systems in your home) to "only 802.11n (5GHz) - only 802.11n (2.4GHz)" by holding down the option key *alt* while clicking on the drop down.
On your Mac
Disable (switch off) wireless
Enter system configuration -> network -> wireless
Uncheck "Ask to join new networks"
Enter advanced options and check that your wireless name is in the first position of the list. If not, drag it with the mouse to the first position.
Click apply
Join your wireless again and try to connect to the 5GHz name (SSID) because the 5GHz will improve the connection speed of your Mac remarkably.
Eventually you might change the settings on the Express too.
Check the location of the AP-Extreme.
It should NOT be placed: On the floor, in a corner, behind furniture, near metal objects, life high voltage wire or cordless phone bases.
It should be placed: As high as possible (up on a shelf or ceiling mounted) with a maximum line of sight to all stations, even thru walls.
If your home situation allows that, try to use the 5GHz band only. If you own a iPhone this must use the 2.4GHz radio.
Lupunus

Time series functions are not working in OBIEE for ESSBASE data source

Hi All,
I am facing a problem in OBIEE as I am getting error messages for measure columns with Time series functions(Ago,ToDate and PeriodRolling) in both RPD and Answers.
Error is "Target database does not support Ago operation".
But I am aware of OBIEE supports Time Series functions for Essbase data source.
using Hyperion 9.3.1 as data source and obiee 11.1.1.5.0 as reporting tool.
Appreciate your help.
Thanks,
Aravind

Hi,
is because the time series function are not supported for the framentation content, see the content of the oracle support:
The error occurs due to the fact the fragmented data sources are used on some Time series measures. Time series measures (i.e. AGO) are not supported on fragmented data sources.
Confirmation is documented in the following guide - Creating and Administering the Business Model and Mapping Layer in an Oracle BI Repository > Process of Creating and Administering Dimensions
Ago or ToDate functionality is not supported on fragmented logical table sources. For more information, refer to “About Time Series Conversion Functions” on page 197.
Regards,
Gianluca

External VGA monitors are not working only with my Macbook Pro 2012mid version

Hi all,
I have a macbook pro 13' 2012mid version, running the latest version of Mavericks, 10.9.2. If I connect my macbook to any extrernal VGA monitor (I have tried 4 different monitors), then the external display is detected in system preferences, but the monitor is showing only black screen (no signal). I am 100% sure, that my minidisplay port, the cable and the monitors are working properly, cause if I boot the same macbook from bootcamp win7 partition, then external monitors are working well.
I have also tried the same miniDP VGA with an older macbook pro (I think it is a model from year 2011, but also running Mavericks 10.9.2) on the same displays and the monitors are working fine. So the problem must be with in my OS X.
A have also tried some things, that I found on the net, like booting with the plugged in monitors in safe mode, reseting pram, I tried different settings for the external monitor in the system preferences (resolution, refresh rate...) but nothing helped. External monitor stayed recognized in system preferences, but with black screen and no signal.

Your post is incredibly hard to read, font is way to small.
If you used Boot Camp Assistant to create a partition to install Windows to you need a REAL Windows 7 or 8 install media and license key and you have to actually install Windows on your Mac. Boot camp is only for creating a partition to install Windows and starting the Windows install from REAL Windows install media.
That Windows install media has to be a DVD disc, if your Mac has a built in DVD drive (Apple does not allow Windows to be install any other way on Mac computers that originally come with a built in DVD drive), or from a USB stick with the actual Windows install files on it (Not an ISO of the Windows install files).
So the question is did you install Windows on your Mac? It doesn't look like it from the Option key boot and the list of available Boot Devices you posted.

Load balance not working right with jdbc connection string?

For months we've used the following connection string to get Tomcat to open connections to our Oracle 10g RAC:
jdbc:oracle:thin:@(DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST
= db1vip) (PORT = 1521)) (ADDRESS = (PROTOCOL = TCP) (HOST = db2vip)
(PORT = 1521)) (LOAD_BALANCE = yes) (CONNECT_DATA = (SERVER = DEDICATED)
(SERVICE_NAME = orcl) (PREFER_LEAST_LOADED_NODE_ORCL = OFF) ) )
Today, db2 became inaccessible during prime time, and the web app completely hung--when you tried to type in a username and password to log into the site, it would just hang indefinitely, and the Tomcat log files were complaining about being unable to open a connection to the database because of a network adapter error.
I would have expected the JDBC driver Tomcat was using to just switch to the other database server, but none of our Tomcat machines did that, and I'm wondering why (they all just hung trying to connect to db2). Our guess is that the difference this time is not that Oracle was down on db2, but that db2 was down entirely. Maybe that connection string works only if the server is up when the database is down, and not when the server is unreachable (we couldn't SSH to the box, and when we tried to get to it locally using a remote access card, a lot of options were grayed out and we couldn't see a shell, so all we could do was reset the box).

Hi,
Please refer to the link below:
SCOM 2012 – Monitoring Oracle Database OLE DB Management Pack Template
http://stefanroth.net/2012/12/05/scom-2012-monitoring-oracle-database-ole-db-management-pack-template/
Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Delta reocrds are not getting extracted . Problem with delta Quaue

Hello friends .
Could you please help me in this scenario ?
Its related to delta load from application 12 , - 2LIS_12_VCITM.
Some how data is not getting transferred from LBWQ to RSA7 . There are more than 200000 entries in LBWQ , but the job is not able to transfer any entries to RSA7.
For rest other application , data is going correctly .
The job status showing is correct , like XXXXX LUW are transferred there is no error in Job log , it technically correct .
I have found one notes , in SAP service market place , but still it doesnt match with my job status . My job status is NOTESID ..where as per the notes it should WKEDPI*** ( something like this ) .
I have taken below steps to solve this problem but still it doesnt work .
1.     Removed job from schedule ( the job for LBWQ to RSA7 ) and Executed the job manually .
2.     Executed Program RMSBW12.
3.     Deleted the Delta Q from RSA for application 12 and regenerated the same once again by running the infopackage , early delta initialization with out data transfer , . Once Delta Q is generated , run the job once again .
I hope , I tried with all correct way ..but still I could not able to transfer the data .
But with all above steps , still data is not transferred . Daily infopackage is running as per the schedule , and bringing only 0 record . If it still doesnt work then I have to do Re-initilization . and this is big cost for us . as we have to lock the sys for users and so on .
Could you please give me some tips , that how can I transferr the data from LBWQ to delta Q ( RSA7) . If it works then definitely , I will save my lot of time .
Please suggest me , how can I proceed . Please save me from this situation.
Many many thanks in advance.
Regards,

Hi Akshay,
Go to SMQ1 and check MCEX12 Queue. If your delta records are piling up in SMQ1 and not being transfered to RSA7, you need to check your back gound job control option once again.
The back ground collector job will collect the recrords from SMQ1 and push to RSA7.
Try to execute RMBWV312 program in SE38 and manully push all the recrods to RSA7. Once all the records are available in RSA7 you will find the MCEX12 queue will be cleared in SMQ1.
Cheers
Praveen

Delta records are not loading from DSO to info cube

My query is about delta loading from DSO to info cube. (Filter used in selection)
Delta records are not loading from DSO to Info cube. I have tried all options available in DTP but no luck.
Selected "Change log" and "Get one request only" and run the DTP, but 0 records got updated in info cube
Selected "Change log" and "Get all new data request by request", but again 0 records got updated
Selected "Change log" and "Only get the delta once", in that case all delta records loaded to info cube as it was in DSO and gave error message "Lock Table Overflow" .
When I run full load using same filter, data is loading from DSO to info cube.
Can anyone please help me on this to get delta records from DSO to info cube?
Thanks,
Shamma

Data is loading in case of full load with the same filter, so I don't think filter is an issue.
When I follow below sequence, I get lock table overflow error;
1. Full load with active table with or without archive
2. Then with the same setting if I run init, the final status remains yellow and when I change the status to green manually, it gives lock table overflow error.
When I chnage the settings of DTP to init run;
1. Select change log and get only one request, and run the init, It is successfully completed with green status
2. But when I run the same DTP for delta records, it does not load any data.
Please help me to resolve this issue.

Playback preferences are not working with 10.5. solution?

I downloaded iTunes 10.5 and my playback preferences are not working. For example, crossfade is screwy. Sometimes it will fade out at the end of a song, but the next song will not come in until the end, or the next song will come in WAY too early. Sound enhancement is also doing nothing. These all worked fine before the update. Has anyone else encountered this?

I too am having problems with crossfade since installing iTunes 10.5 where mostly it is just fading the end of the song.. when set to a 6 second crossfade it is just fading the last 20 seconds and still waiting till the song ends before starting the new song & i've also noted that sometimes a new song will begin when there is in excess of 20 seconds left of the previous song remianing.. hence, it sounds rediculous. i've tried uninstalling & re-installing but no fix. please help anyone..

Help needed I updated my ipad2 with iOS5 but few of my dashbaords are not working now can any one let me know how to downgrade the OS

Help needed I updated my ipad2 with iOS5 but few of my dashbaords (HTML5) are not working now ,can any one let me know how to downgrade the OS as we have a meeting coming up .. its urgent

Downgrading the iOS is not supported. If you are using Safari this try clearing its cache via Settings > Safari.
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "

In PHotoshop CC, my blenidng options are not working at all. A window comes up with the message "Could not complete your reequest because of a program error. "
Linda

In Photoshop CC whenever I try to apply blending options to a layer, an error message comes up.. In my error message log, this is what comes up
2013:07:12 16:17:16 : tracked key 0000000000000238 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:12 16:17:16 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:07:18 19:20:19 : tracked key 0000000000000100 of type struct _ADsc * __ptr64 not found : 1 : REQUIRE failed 2013:07:18 19:20:19 : e:\ps13\ps_14_win_x64_daily_retail\20130423.r.221\photoshop\main\photoshop\interfaces\UTr ackResourceImp.h : 137 : REQUIRE failed 2013:09:05 22:42:22 : ..\..\sources\USheetRendererCommands.cpp : 556 : REQUIRE failed 2013:09:16 17:22:13 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:16 17:22:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:20 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:19:37 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:25:58 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:21 16:28:01 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:34:51 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:19 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:35:30 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:55 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:37:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:38:22 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 14:43:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:25 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:42 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:13:59 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:23 17:14:16 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:25 22:04:18 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 16:58:46 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:46:04 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:08 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:47:32 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:05 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:12 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:54:33 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 17:57:02 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:03 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:40 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 18:05:49 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:17 :
..\..\sources\UPattern.cpp : 1679 : REQUIRE failed 2013:09:26 20:31:53 : ..\..\sources\UPattern.cpp : 1679 : REQUIRE failed

ADF bindings are not working with inheritance heirarchy.

ADF bindings are not working with inheritance heirarchy. I am using embedded OC4J in JDeveloper 10.1.3.2.
For the data model I have the following objects\attributes.
1) User (abstract EJB 3.0 POJO)
- Id
- userId
- userName
2) Employee -> extends User (EJB 3.0 POJO)
- enabled
- password
3) Manager -> extends Employee (EJB 3.0 POJO)
- numOfEmployees
4) UserSessionBean (Stateless Session Bean)
- public User findUserByUserId(String userId)
- public List<User> queryUserFindAll()
- Object mergeEntity(Object entity)
I created 2 JSF pages using ADF.
1) ListUsers.jspx - Lists all the users of type Employee and Manager in a table. You can select an user and chose to modify the user details using a modify button.
2) ModifyUser.jspx - Modify the selected user and persist the modified user details.
I implemented ListUsers.jspx by dragging and dropping queryUserFindAll() method from the ADF datacontrol on to the JSF page and selected ADF Table format with selection enabled.
Similarly for the ModifyUser.jspx page I dragged and dropped the User object returned by findUserByUserId(String userId) and selected ADF Form format. I selected OutputText field types for userId and userName.
I then created a navigation case from ListUsers.jspx to ModifyUser.jspx and pass the selected user.
Now when I try to run the web application, ListUsers.jspx correctly displays all the users. Then I select a user of type Employee and click on the modify button. This brings up the ModifyUser.jspx page. However, the UserId text field displays the value for "Id" field rather than "userId".
Question that I have is:
- Why is ADF framework not able to retrieve the appropriate user attribute value for a Employee based on the binding information in case of inheritance ?
Thanks,
Piyush

Hi,
tried with JDeveloper 10.1.3.3 and this works for me. Try JDeveloper 10.1.3.3 - if it doesn't work, have a closer look at your sessionFacade
Frank

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS

After installing iOS6, my Maps are not working at all, anything i search it says "result not found" even after placing a pin and selecting "Direction to here" i get the same result not found. Very disappointed with the new iOS.

Have you run it in a debugger? That will show you exactly what is happening and why.

Delta Loads are not working: 0FI_GL_10 With enhancement : HR Data in source

Similar Messages

Maybe you are looking for