Deltas are not coming to RSA7 from SM13

Hi All,
In BW i am not getting Delta's for 2LIS_02 Datasources,
I have checked in RSA7 it is showing 0 Records, but in SM13 there are many V2 Processed Jobs.
Please can anybody help me how to get Delta's to RSA7, this problem is persist since 1 week.
Regards,
Kiran

Hi Praveen,
I have run that, still i am not getting  records in RSA7.
I have followed like this, Please correct me if i am wrong
Gone to LBWE, Selected Job Control towards 02, 
Maintained Start Data is Immediate in Job Parameter,
And Scheduled Job from Job Control,
When i checked in SM37, there is no job, Only one job is in Released state for Tomorrows load.
Please let me know your views on this.
Regards,
Kiran

Similar Messages

  • Deltas are not coming to PSA

    Hi all,
    we have a data model in BI to extract data from table through Generic data source
    previously the delta infopackage is working very fine in picking deltas but now the delta infopackage is not getting any delta records to PSA we have around 750 new records in the table
    but when running the delta infopackage it showing "0 from 0 records" and turning to green saying "no new data in the source"
    what may be the cause for this i reactivated and saved everything
    please guide me in this
    thanks in advance

    Hi MSS,
    The Delta and Full Load are TWO different Routes.Both are not connected to each other.
    If u  r pulling Delta records the it will come to RSA7 and If it is FULL Load then it come to RSA3.
    If u want Delta records then u have to do an Init and run V3 job.
    Follow this procedure
    For Full Load
    1)Delete Set Up Table-In r/3
    2)Do an Init Data load without data transfer .BI Side
    3)Fill Up Set up Table-In R/3 and Check in RSA3 for data.
    4)FullLoad -in BI -the histroy data will flow.
    For Delta Loads
    1)Do an Init Data load without data transfer .BI Side
    2)Check whether the datasource is GREEN Status in RSA7 in R3
    3)Run the V3 job-LBWE JOb Control or in SM37
    4)Then check data for the Delta in RSA7 in R3.
    5)Do a delta Load .
    If u follow this u shud get the Data in BW,u have probable not initiallized the delta that is the reason u r not getting data or u have not RUN the V3 job in LBWQ or SM37,also check in RSA7 ,whether data is avaliable.
    Rgds
    SVU

  • New deltas are not posted to BI from datasource:2LIS_12_VCITM

    Hi All,
    recently we integrated new sales organisation to our  datasource: 2LIS_12_VCITM,but the  data is not coming from this datasource:2LIS_12_VCITM
    to BI system.this data is not coming to BI system,but data is available in r/3 tables: likp and lips tables. daily we are loading deltas to our bi system.Could you please provide us the table at r/3 side where i can check the settings of this datasource:2LIS_12_VCITM.
    Thanks,
    Vikarm.

    Hi Vikram,
    Below are tables where you can check for datasources:
    In the Source System:
    Table                         Description
    ROOSOURCE            Header table for DataSources in the source system
    ROOSFIELD              Specific fields for a DataSource in the source system
    ROOSGEN                Generated objects for spcific DataSource in the source system
    In the Business Warehouse system:
    Table                                       Description
    RSOLTPSOURCE                    Replicate Table for OLTP Sources in BW. For 3.X DataSources.
    RSOLTPSOURCEFIE OLTP      Source Fields. For 3.X DataSources. I
    RSDS                                      For 7.X DataSources.
    RSDST                                    DataSource - Texts
    Regards,
    Ashvin

  • Delta Records not coming from sm13 to rsa7

    Hi,
    We have found that for the application 02, delta records are coming in RSA7(delta queue) even if these are coming in sm13.
    It appears that some protocol responsible for bringing the delta records from sm13 to rsa7 is failed.
    Fact is that for the data sources related to application 02 (purchasing: LO Cockpit), we did some enhancements through LBWE.
    But before transporting the relavant requests to production, we did not delete sm13 and rsa7 entries and also at the time of transpoting the requests in production, postings were made by several users and the entries for those were appearing in sm13.
    Thing to notice is that whatever fields were shifted in LBWE, those changes have successfully appeared in production after transporting ( LBWE and relavant Extract Structure in Production are containing the required changes)
    Now each time to load the data in BW, we have to delete and refill the set up tables and schedule full update which is taking a lot of time and not advisable.
    Each time when we are running job control in LBWE, it is throwing dump in ST22 with the heading CONNE_IMPORT_WRONG_STRUCTURE.
    It appears that some internal problem has occured in the structure of rsa7/sm13 for application 02.
    Also it is written in the dump that:--
    When attempting to import data, the structure of the complex object
    "MC02M_0ITM_TAB"
    was not compatible with the target object. The error occurred with
    component no. 24.
    Try to find out why the structure of the object is unsuitable.
    There are several possible reasons:
    |
    --- In the ABAP Dictionary, the structure of the imported
    |   object has changed. Make sure that the structure of the imported
    |   object matches that of the Dictionary structure.
    |
    |   If the data could not be restored from another source, this data
    |   must be read with the "old" structure, then converted and exported
    |   back with the new structure, so that future IMPORTs always work
    |   with the new structure.
    |
    --- A new program version is active, and it no longer matches the
        dataset. Try to solve the error by generating the program "SAPLMCEX" again
        as follows:
        In the SAP System, choose the transaction SE38. Enter the program
        name "SAPLMCEX". Then choose the "Activate" function.
    Now how to make the things back on track so that delta records come in rsa7 from sm13 so that we schedule delta update in info package.
    Is there any OSS Note or Standard SAP Report which we have to run for getting the solution.
    If not, please suggest the solution.
    Thanks in advance,
    Tarun Brijwani.

    Hi,
    1. Check whether your Extractor will support Early Delta Inti or not..
    See this link for  Early Delta Initia...
    http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
    Minimize downtime for delta intia..
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d51aa90-0201-0010-749e-d6b993c7a0d6
    Perform this activity on Weekends,
    Also see 436393 - Performance improvement for filling the setup tables
    Note 753654 - How can downtime be reduced for setup table update
    2. Obviously Background job.
    BG jobs can be monitored thru SM37 and maintain Logs thru SM21 and can be easier for administration
    Thanks

  • Delta changes in R/3 sales document are not coming into CRM

    Hi Middleware experts,
    We are on CRM 5.0 SP 005 with ECC 5.0 SP 007 and using the scenario X for sales documents replication.
    Now the order is created in CRM and successfully transfered to R/3. I can see 3 Bdocs in SMW01 with green lights. First Bdoc says 'R/3 adapter is called', second Bdoc says 'the order is successfully saved' and displays a warning 'The sales document is not yet complete: Edit data' and third Bdoc has no messages. Also I do not see any struck queues in CRM and in R/3
    I am able to edit the sales document in both the systems as per the scenario X. Now I have completed and saved the document in R/3. Surprisingly these changes are not coming into CRM and no new entries in SMW01. Also R/3 SMQ1 and CRM SmQ2 doesn't show any entries. I am also not able to debug, since I do not see any Bdocs in SMW01.
    Now, if I changes the document in CRM and these changes are coming into R/3.
    Also all documents created in R/3 are successfully going into CRM including delta changes in R/3.
    I do not have any clue on what is happening? Highly appreciated, if you can help me.
    Thanks,
    PK

    Hi PK,
    In R3AC1 only we put the filter. So if you do not have any other filter then make sure that you are changing the order which was created not before the date mentioned.
    I would recommend you to just deregister the CRM system in R/3 Transaction SMQS and do some changes in the orders and check any queues are getting created corresponding to that order, If yes that means filter is not an issue. Then debug the queue and find the exact problem. Also make sure that the order you are changing in R/3 is of the same order type what you have mentioned in the filter.
    Make sure to registor back the CRM other wise all the queues will get stuck in R/3 outbound.
    <b>Reward points if it helps!!</b>
    Best regards,
    Vikash.
    Message was edited by: Vikash Krishna

  • When I send a text message from my iPhone response only comes back to my iPhone .  If I send from iPad, response only comes back to iPad. Whichever I used last is where response comes.  Responses are not coming to both anymore!  Please help?

    When I send a text message from my iPhone response only comes back to my iPhone .  If I send from iPad, response only comes back to iPad. Whichever I used last is where response comes.  Responses are not coming to both anymore!

    On both devices when you go to settings>messages>send and recieve how are poeple contacting you on each device?. e.g. email or mobile number.

  • I just recently upgraded from a 3gs to a 4s and since i upgraded text messages are not coming in or going out unless i'm texting another iphone?

    I just recently upgraded from a 3gs to a 4s and since I upgraded text messages are not coming in or going out unless I'm texting another iphone?

    http://support.apple.com/kb/TS2755

  • The movies from my Iphone 5 are not coming across on Apple TV. The little spinning beach ball appears like it is thinking.  It use to work but quick working a month ago.

    The movies from my Iphone 5 are not coming across on Apple TV. The little spinning beach ball appears like it is thinking.  It use to work fine but quick working a month ago. I mirror from my phone to the Apple TV.  Still images and everything I do on the phone is mirrored on to the TV except when I want to show a YouTube video or any video and then the screen on the phone and the TV screen go black and the spinning beach ball appears.  The videos open right up on the phone if I do not have mirroring on and going through the Apple TV.  I just downloaded the latest update to the phone it did not fix the problem.  Please help.  Thanks, Elvis G

    Hello Elvis G,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps concerning device issues. You may want to consider a reset, then testing to see if the issue is resolved:
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    How to reset
    You should reset your device as a last resort and only if you can't restart it.
    To reset, press and hold both the Sleep/Wake and Home buttons for at least 10 seconds, until you see the Apple logo.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Tables are not coming to oracle model from sqlserver 2000 while using OMWB

    Hi,
    I am using oracle migration workbench to migrate SQL Server 2000 to oracle 9i. When �capture source database and create the oracle model� is run. only tablespace and users coming to Oracle model from sql server. Table are not coming. These table are owned by dbo in sql server and
    All other users in the database has full privilege on this tables. Do I need to some setup to get this tables
    In oracle model.
    Thanks
    Harish

    Try the following
    || This script sets the "dbo" to have the "sa" login.
    || NOTE: Server settings for the SQL Server instance must be set to
    ||"Allow modifications to be made directly to the system catalogs".
    || This is found under Server Setttings tab for server properties.
    UPDATE sysusers
    SET sid = (SELECT sid FROM master..sysxlogins WHERE name = 'sa')
    WHERE name = 'dbo'

  • Delta records are not found in RSA7 but can be seen in RSA3

    0HR_PY_1
    Delta records for 0HR_PY_1 is not showing in RSA7 for the month of April
    but showing in RSA3.How can we load to BI when they are not appearing in RSA7?
    Can any one please guide what and how many  transactions should exactly lead to the updation of RSA7 delta queue?
    If the list of the transactions can be given,I can cross verify with the users whether these transactions are already over or not.Help is sincerely expected..Kindly help.
    Regards
    Sharif.

    Hi,
    Please examine this note for RSA7 : 380078

  • My photos from my iphone 4s are not coming across in my ipad or my computer.  I have everything with icloud and photos turned on

    My photos from my new iphone 4s are not coming across on my ipad or my computer.  I have all devises synced together, icloud on photos are turned on.  Not sure what else to do?

    Welcome to the Apple Community
        •    Photostream only syncs photos over Wi-Fi, make sure you are connected to Wi-Fi to begin with.
        •    Photostream only syncs when the camera app is closed, ensure it is closed.
        •    Photostream only syncs when the battery is above 20%, try recharging the device
    Try disabling photo stream on your device (settings > iCloud), restarting your device and then re-enabling photo stream.
    If this doesn't help you may need to reset photo stream. You can do this at icloud.com by clicking on your name in the top right corner and then the advanced settings in the pop-up dialogue box that appears.
    Note: disabling photostream and re-enabling it will result in any photos that are currently in the photostream album on your device, that are older than 30 days old, not being added back.
    Photostream when enabled will only add photos from the camera roll that were taken post photostream activation. (Photostream does not currently share video)

  • What does it mean if I get blank text messages from someone but they are not coming from number they appear and disappear they are not coming over the network also emails have been moved around, has my phone been hacked?

    I Have been getting blank texts from a number, but the person who owns the niumber is not sending them, they appear then disappear, they are not coming over the network, they come even though number has been black listed, also emails have been moved, I believe by someone who is cyberstalking me but don't know how to prove it, what can I do ?

    Hi,
    When a Mac is "registered" for iMessages account with an Apple ID the Serial Number of the Mac is used to create an Auth Token as it is called for the Messages app that allows that Mac to work.
    I would guess a similar process of linking the Number of the iPhone to a Hardware fact about the device is also in place.
    I would contact Apple Support and check with them.  (you might need to speak to a Level 2 person as Level 1 people are script led and try to fit everything into Software or Hardware categories where as sorting and Apple ID (which the Number is in this case) is normally Free).
    I did find this iOS: Troubleshooting Messages - Apple Support
    It starts off about sorting SMS that is not working.
    This one has a bit on Unlinking an iPhone Number (with or without the iPhone) iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage - Apple Support
    7:55 pm      Tuesday; January 6, 2015
    ​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad

  • Few line items are not coming at the time of creation of delivery

    Dear Experts,
    When the user creating the delivery few line items are not picking in the delivery document
    the following checks i verified,
    Stock is available
    shpping condition is differ from sold to party and sales document
    Plants are same for all the line items
    why the few line items are not coming in the delivery document creation,
    please help me to sort out this issue
    Thanks and Best Regards,
    Muralidharan S

    Hi,
    Check below points.
    Point 1:
    When you create a delivery document, you create it for a Shipping Point.
    So whatever the line that came in to one delivery has determined same shipping point that you entered in VL01N screen.
    Others got a different shipping point and that's why it didn't come to the same delivery document.
    Shipping point determined based on below criteria
    - Shipping Condition - From customer master
    - Loading Group - Material
    - Plant  - Delivery Plant of the sales order line item
    You assign a proffered shipping point for above combination in configuration.
    If that combination is not find, those line items are not going in to the delivery.
    You can check the log of the delivery document for more information as well.
    Point 2:
    Check the line item Requested delivery date and the "Selection Date" you entered in the VL01N screen.
    Al  Requested delivery dates has to be on or before the  "Selection Date" you entered in the VL01N screen.
    Those line items which has a date more than that will dropped in the delivery.
    Best regards,
    Anupa

  • Prices are not coming in invoice

    Dear Friends,
                     When i prepare a sales order than prices are coming, but during invoice preparation prices are not coming for particulary 2 materials only.Please help.
    Regard.s,
    Abhijeet

    Dear Friends,
                    Thanks for your reply. In copy control from delievery to billing,settings are as follows,
             Pricing type:- G
             Coping requirement:-004
             Data VBRK/VBRP:-007
      Users enter prices manually when they prepare sales order.Condition category is empty in condition type.
      Looking forward for your reply.
    Regard,s
    Abhijeet

  • Educationau200Bl SCessCVD (J1CV) is not coming in MIGO from MIRO

    Hi,
    This is a scenario of Import Purchasing of Excisable Material
    I did Invoice Verification (MIRO) for Custom and CVD and while doing Goods Receipt (MIGO), I referred the Invoice Document No. as well.
    The value of CVD (JCV1), ECess CVD (JECV) and Add. Customs duty (JADC) is being captured in MIGO from the Invoice document but the value of Educational SCessCVD (J1CV) is not flowing from the Invoice document.
    The CIN settings regarding Excise default seems to be properly maintained for the rest three condition types above mentioned but since the condition type J1CV is hard coded in SAP so this couldn't be maintained in Excise Default.
    Please provide the expert opinion to overcome this issue.
    Thanks in advance
    Rajesh Praveen

    Hi
    J1CV SEcess you have to maintain in AT1
    Check once again Chapter ID Tax indicator, Vendor Tax indicator, Cenvat determination for particular materials all are in J1ID, and check your condition type is in classify condition types
    [Re: Ecess and SCEss values are not coming automatically in MIGO for import;
    Regards
    Kailas ugale

Maybe you are looking for