Deluge not accepting wide characters

First post ever!
I'll get straight to my problem. I'm trying to download the discography of Jørn Lande <-- norwegian character right there
and Deluge doesn't accept it. Says something about invalid or incorrect multibyte or wide character. The download is thus paused, and I'm stuck. I've wasted the day downloading the torrent with transmission (no error message in GUI, didn't check terminal) but it didn't save the information downloaded, and thus wasted my afternoon. What do I do? Is there some patch or package I can download to make Deluge accept wide characters?
Cheers

I've uncommented the following:
nb_NO.UTF-8     UTF-8
nb_NO   ISO-8859-1
"locale" in terminal gives:
LANG=nb_NO.utf8
LC_CTYPE="nb_NO.utf8"
LC_NUMERIC="nb_NO.utf8"
LC_TIME="nb_NO.utf8"
LC_COLLATE="nb_NO.utf8"
LC_MONETARY="nb_NO.utf8"
LC_MESSAGES="nb_NO.utf8"
LC_PAPER="nb_NO.utf8"
LC_NAME="nb_NO.utf8"
LC_ADDRESS="nb_NO.utf8"
LC_TELEPHONE="nb_NO.utf8"
LC_MEASUREMENT="nb_NO.utf8"
LC_IDENTIFICATION="nb_NO.utf8"
LC_ALL=
Is something wrong?

Similar Messages

  • SQL Developer not accepting certain characters from the keyboard

    Hello,
    I have been using SQL Developer for 5 or 6 months now, with minor issues and great satisfaction.
    A few days ago, just out of the blue, in the middle of the day, SQL developer started not accepting the following characters:
    Ctrlv, Ctrl + c, F5, F9 (I Think all function keys), BackSpace, Delete, Enter and arrow keys.+*
    T*his is only happening in the text editor part*. I am able to use this keys in the results, whether they were a script output or an execute query output.
    SQL developer also functions properly (if i paste using the mouse, paste works.. and all the other keys)
    I checked the pc for viruses, using AVG, no viruses were found (my avg is updated daily and runs daily virus checks on a schedule, and this issue has been here for the past 1 or 2 weeks, so it was a virus, i think it should have been discoverd, besides, the keys are still working in sql developer, only not in the text editor part)
    Needless to say, but if i run notepad and type, keys work properly.
    I also reinstalled it in another folder with no luck
    Tried so many restarts .. no luck
    Tried it in safe mode .. no luck
    I am using SQL developer Version 1.5.4, Build MAIN-5940.. on Windows Xp
    I am suspecting there's some option in it that I disabled without paying attention..
    HELP!!!
    Regards,
    Charles

    All that time trying possible solutions is understandable, but then typing them in your post... when searching the forum would have given you the solution under 1 minute:
    Preferences - Accelerators - Load Preset - Default
    Hope that helps,
    K.

  • URL Parameters in KM Search iView not accepting spacial characters

    I have created an iView that shows standard search.
    When accessing the search iView, I use an url.  To specify the search query, I add QueryString=[search query string] to the url.
    Problem is that if my search query contains the danish characters æ, ø or å, then they are replaced with &#65533;.
    I have a text field on a 3'rd party component where user input the search string, and i have tried to encode it with the javascript function escape() and this does not work either. Difference is that the search is now based on escaped characters. The iView does not seem to be able to decode the string again.

    I have investigated further now.
    It is the KM Search iview that does not handle encoded characteres properly.
    When using the standard search function in the portal, same propblem exist.
    Steps for recreation:
    1) Log in to the enterprice portal using a user that has got the standard search input field and search button. Could be an administrator.
    2) In the search input field, write the danish word: skål.
    3) Push search button
    Search result page is now opened in a new window.
    Term is now presented as sk[box]l.
    Having a look in the url to the new window, shows that the special character is encoded. Therefore problem is that it is not decoded in the iView.
    I also found that "Note 917961 - NW04 CM & Collaboration: SP 14 Patch 5" describes that the problem is solved in patch 2 in SP14. As far as I understand the note.

  • FindNode returning Null And XML Not Accepting Special Characters

    Hi All,
    i am trying the get the attribute value in the element "ns4:InfoCFDi" using FindNode method, but the method is returning NULL. I used the same code for other sample as well and was successfull. but for this specific XML file(which is below) I am getting a Null.
    i can get till S:Body, but when i try to use FindNode for ":Body/s4:ResponseGeneraCFDi" I get Null value.
    And I used "S:Body/*[local-name()=" | "ns4:ResponseGeneraCFDi" | "]";
    as mentioned in other post but still no success.
    ==>I Have one more question relating to special characters. I need to use characters such as - ó in my XML to read as well as write. When I try to read i am getting XML parse error and when writing, i cannot open the file properly.
    Your help is much appreciated.
    My code is here:
    Local XmlDoc &inXMLDoc, &reqxmldoc;
    Local XmlNode &RecordNode;
    &inXMLDoc = CreateXmlDoc();
    &ret = &inXMLDoc.ParseXmlFromURL("D:\Agnel\Mexico Debit Memo\REALRESPONSE.xml");
    If &ret Then
    &RecordNode = &inXMLDoc.DocumentElement.FindNode("" );
    If &RecordNode.IsNull Then
    Warning MsgGet(0, 0, "Agnel FindNode not found.");
    rem MessageBox(0, "", 0, 0, "FindNode not found");
    Else
    &qrValue = &RecordNode.GetAttributeValue("asignaFolio ");
    Warning MsgGet(0, 0, "asignaFolio." | &qrValue);
    End-If;
    Else
    Warning MsgGet(0, 0, "Error. ParseXmlString");
    End-If;
    XML File:
    - <S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/">
    - <S:Body>
    - <ns4:ResponseGeneraCFDi xmlns="http://www.xxl.com/ns/xsd/bf/rxx/52" xmlns:ns2="http://www.sat.gob.mx/cfd/3" xmlns:ns3="http://www.xx/ns/bf/conector/1&quo t; xmlns:ns4="http://www.xx/ns/xsd/bfxx/xx/32&qu ot; xmlns:ns5="http://www.xxcom/ns/xsd/bf/xxxxx&q uot; xmlns:ns6="http://wwwxx.com/ns/referenceID/v1">
    - <ns3:Result version="1">
    <ns3:Message message="Proceso realizado con exito." code="0" />
    </ns3:Result>
    - <ns4:InfoCFDi noCertificadoSAT="20001000000100003992" refId="STORFAC20121022085611" fechaTimbrado="2012-10-22T08:56:45" qr=" "
    uuid="a37a7d92-a17e-49f4-8e4d-51c983587acb" version="3.2" tipo="XML" archivo="xxx" sello="B8WjuhYLouSZJ6LU2EjxZ0a4IKyIENZNBx4Lb4 jkcAk6wA+EM477yz91/iDdsON0jm8xibBfom5hvHsH7ZK1ps3NnAXWr1LW 7ctmGsvYKAMvkCx/yOVzJTKFM2hN+OqCTE0WVfgv690vVy2CDQWKlMxbK+3idwG4t OKCMelrN9c=" fecha="2012-10-22T08:56:44" folio="281" serie="IICC">
    <InfoEspecial valor="Este documento es una representacin impresa de un CFDI." atributo="leyendaImpresion" />
    <InfoEspecial valor="||1.0|a37a7d92-a17e-49f4-8e4d-51c983587acb|2012-10-22T08:56:45|B8WjuhYLouSZJ6LU2EjxZ0a4IKyIENZNBx4Lb4 jkcAk6wA+EM477yz91/iDdsON0jm8xibBfom5hvHsH7ZK1ps3NnAXWr1LW 7ctmGsvYKAMvkCx/yOVzJTKFM2hN+OqCTE0WVfgv690vVy2CDQWKlMxbK+3idwG4t OKCMelrN9c=|20001000000100003992||" atributo="cadenaOriginal" />
    <InfoEspecial valor="Doscientos dieciocho mil cuatrocientos setenta y cinco pesos 00/100 M.N." atributo="totalConLetra" />
    </ns4:InfoCFDi>
    </ns4:ResponseGeneraCFDi>
    </S:Body>
    </S:Envelope>
    TIA

    First of all you have to supply a value you want to search for and this has to be the complete path to the value. You're saying you already tried that, but can you paste the code which you used for that? I don't see the path mentioned in the code you posted.
    *FindNode*
    Syntax
    FindNode(Path)
    Description
    Use the FindNode method to return a reference to an XmlNode.
    The path is specified as the list of tag names, to the node that you want to find, each separated by a slash (/).
    Parameters
    Path
    Specify the tag names up to and including the name of the node that you want returned, starting with a slash and each separated by a slash (/). This is known as the XPath query language.>
    Another option would be this snippet of code:
    &InfoCFDiArray = GetElementsByTagName("ns4:InfoCFDi");
    &InfoCFDiNode = &InfoCFDiArray [1];
    &attValue = &InfoCFDiNode.GetAttributeValue("noCertificadoSAT")
    Warning(&attValue);
    It creates an array of XML Nodes which match the name "ns4:InfoCFDi". Since there's only one in the XML it's safe to assume it will be the one and only node in the array. I've assigned that node to the variable &InfoCFDiNode and use that to retrieve the attribute "noCertificadoSAT" value. The warning message should display the value supplied there.
    Concering the special characters; you will have to change the encoding of the XML. Peoplecode sets this to UTF-8 by default, but doesn't include this in the header. There's a little hack for that somewhere on the web, I'll see if I can find it.

  • Login screen will not accept special characters in password

    So, I have a domain account that has a password that contains the character created by pressing ctrl and Backspace key. I have found that if you attempt to type that character at the windows login screen, it will not recognize that. If you remote desktop
    to the pc from any version of windows, it will allow you to type in that character and logs in fine. If you went to change a local users password by using the Computer management mmc, it will allow you to enter that character.
    How is it possible that this was overlooked, and is there a likelihood of it being fixed?
    I'd like to point out that this occurs in windows 8.1 also. I have a large base of bilingual users that have Spanish and other characters in their passwords that have worked up until now.

    Hi,
    If i understand you correctly, you could not type the special character at the windows login screen in windows 8.1, but remote desktop could. Am i right?
    According to my test, the same result.
    So i think you could remote to the pc and change the password:
    http://support.microsoft.com/kb/149427/en-au
    Regards.
    Vivian Wang

  • Contact form not accepting certain characters in the email box

    Hi, i am currently using a flash template from flashmo.com and i have installed it etc... The problem i have is that when you go to send a message in the contact form you cannot enter certain characters in the email box, especially the '@' symbol, hw do i go about fixing this?
    Thanks a lot

    for each textfield you see in the ide, click it (to select it) and check the properties panel/embed fonts to make sure all characters needed in your app are checked.

  • Photoshop elements 13 serial number field not accepting any characters...WHY...WHY...WHY not?

    second installation of software first worked no problem but now no go. running windows 7 on both, any thoughts?

    HI Collin
    If you have a 24 digit code that contains letters and not all numeric numbers. It sounds like that you have the redeem code. Click this link to redeem the code. http://creative.adobe.com/redeem
    Then you will be provided the serial # to install the software with.
    Let me know if you run into any issues
    Thanks
    Scott

  • What can I do about a 2008 iMac that does not accept any input, thus blocking entry of password at startup?

    My 2008 iMac (20 inch) often freezes. Now it will not accept any input on startup.  I type in my password, but it will not accept any characters I enter.  The blinking line just continues to blink.  It will not acknowledge my keyboard, mouse or trackpad.  I have done a forced reboot and a force reboot combined with subsequently disconnecting the power cord and then restarting.  No response from either step.  What can I do?
    Thanks.

    Glad it is working for you.
    Have a look at these two articles they may help if it occurs again.
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/HT1379

  • In Query mode, date items does not accepts more than 10 characters..Why?

    Dear All,
    In my form, While querying my date items, it does not accepts more than 10 Characters. Could it be changeable.
    Actually i want to search like greater than specified date( >01/01/2007 ).
    But i can specify like >01/01/07. After tabbing out from that item, it displays like >01/01/200.
    How to overcome this issue.
    Please help.
    Regards,
    Balaji

    You are absoletely correct Francois!
    Previously i have made a mistake that both of my maximum length and query length property to 20. That time it was not worked. Now i changed my maximum length to the old one like 11 and i changed only the query length to 20.
    Now it is working. I understood the concept wrongly.
    Thanks Francois!

  • Desktop not accepting HP-Display - Compaq WF1907 Wide LCD Monitor update

    All...
    My desktop not accepting the HP-Display - Compaq WF1907 Wide LCD Monitor update.  I've tried many times since 1/10/2008.  Its really just annoying more than anything else.  Anyone know why I can't get this update into my computer.  I've never had any other problem with my Compaq-Presario GG060AA-ABA SR5127CL.  Maybe I should just count my blessings and overlook this anomaly.  Thanks. 
    P.S.  I just noticed that I put this message under the Notebook category.  Oh well, maybe someone can answer my question anyway.  

    Here's the basic steps , including checking the parameters.   My all time favorite,  using reverse logic (sometimes).
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • External table is not accepting more than 255 Characters

    Hi,
    I'm new to External table.. Somehow External table is not accepting more than 255 Characters even though I'm using VARCHAR2(4000 BYTES).. Can you please help me..
    CREATE TABLE DM_CL_ExterTbl_Project
    project_name VARCHAR2(80 BYTE),
    project_id VARCHAR2(20 BYTE),
    work_type VARCHAR2(100 BYTE),
    work_description               VARCHAR2(4000 BYTE)
    ORGANIZATION EXTERNAL
    TYPE ORACLE_LOADER
    DEFAULT DIRECTORY UTL_FILE_DIR
    ACCESS PARAMETERS
    records delimited by '#(_@p9#' SKIP 1
    logfile 'pp.log'
    badfile 'pp1.bad'
    fields terminated by ','
    OPTIONALLY ENCLOSED BY '"' and '"'LDRTRIM
    missing field values are null
    REJECT ROWS WITH ALL NULL FIELDS
    project_name,
    project_id,
    work_type,
    work_description
    LOCATION (UTL_FILE_DIR:'TOG_Data_Extract.csv')
    REJECT LIMIT UNLIMITED
    NOPARALLEL
    NOMONITORING
    Thanks in advance..
    ~~Manju

    I got the asnwer.. In the filed list I have to specify the datatype & it's Size otherwise by default it will take CHAR(255)..
    work_type CHAR(4000) solved the problem..!!

  • HP Officejet 6500, Windows XP and 7, wireless LAN security code is not accepted

    The security code of my wireless LAN is not accepted by the HP6500A. According to the diagnostic software of HP a code consisting of more than 50 characters is required (the total number of characters can not be identified because the code isgoing on out of the window). The security code of the route consists of 12 characters. Resetting the printer is not solving the problem.
    This problem was identified after rinstalling the software after problems with printing: connection with the printer was identified; message: "busy with printing", but no printing result at all.

    Security codes can be in ASCII or HEX.  I'm guessing that the diagnostics is reporting HEX and the printer entry is in ASCII. 
    You can try running the diagnostics SW on the Windows 7 computer.  It might return the key in ASCII.
    A good option is to get the password from somewhere other than the diagnostics.  Maybe you stored it somewhere or wrote it down?  Once you get it try to enter from the front panel.
    Can I get a little information from you?
    What router brand model?
    What security mode are you using (WEP, WPA, WPA2)?
    Which model of the 6500 do you have (6500 or 6500a)?
    Please mark the post that solves your problem as "Accepted Solution"
    Sometimes it takes several posts back and forth to get to a solution - please be patient.
    I am employed by HP

  • File URLs -  do not accept spaces in folder/direcotry name?

    Version of US used is: 1.0.3
    I tried to create a file data source with the following file URL from the Administration Application under the Sources/File tab:
    file://localhost/c:/myDir/New Folder/
    But I got the following error:
    Oracle Ultra Search Error
    Invalid file protocol URL:Folder/
    URL does not begin with file://
    Note: It is not a problem if the folder name does not have a space. E.g. when I renamed "New Folder" to "New_Folder", it was fine.
    My questions: Is that correct that US does not accept file URLs with spaces in the folder/directory names? If so, is it the same with the newer release US 9.0.2?
    Thanks.

    Currently space is used as a delimiter in file seed URL.
    Therefore, user can not crawl files located in directory containing space. This is the case for 9.2, 1.0.3, 9.0.2. You raise a good point, I will evaluate the possibility to remove this restriction in our next release (iAS 9.0.4). If we decide to support this, I will update this question.
    Thanks ! ^_^
    Cindy
    This is the text on Create File Source Step 2:
    ===================================================
    Enter a list of URLs separated by valid delimiters. A valid delimiter can be any one of the following characters: a space, tab, newline or comma.

  • When starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names

    when starting up after a erase/reinstall of Mac OS X 10.6 it will not accept any of my passwords/names, I had just entered my info and clicked on "continue", the cube began to turn and froze, a translucent screen came over the whole window and request that I restart the computer, after doing so, I got the start up sound and a message saying that OS X was starting up and then the sign in window, but when I entered my info it kept shaking/rejecting it, only thing I can think is that could I have possibly entered my password wrong twice, don't know, I'm still scratching my head.

    Do it again, I'm afraid. Be sure you set up the initial admin account with a proper password you can remember - all lowercase letters and numbers. No special characters or spaces except for the "_" underline character.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. Be sure you configure your initial admin account with the exact same
             username and password that you used on your old drive. After you finish Setup
             Assistant will complete the installation after which you will be running a fresh
             install of OS X.  You can now begin the update process by opening Software
             Update and installing all recommended updates to bring your installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Upgraded Blackberry Desktop software and now it will not accept my device password. What's happened?

    I've upgraded the software on my desktop and connected my Bold 9700 to my computer.  It asked me for my device password but it's not accepting it.  I'm up to 8/10 tries and I know I'll have issues if I keep trying.  I've disconnected my bb but it is still wanting a password and not accepting it.
    Also the password field on my bb is showing me the characters I'm typing in as opposed to astericks.
    I don't know what is happening and I don't want to lose all my data.  Help!
    Solved!
    Go to Solution.

    I found the answer.  I was entering the wrong password and not realizing it.  sorry if i waster your time reading this.

Maybe you are looking for