Demantra PTP table structure changed in 7.3.X.X

The staging tables structure is changed in Demantra version 7.3 onwards as compared to Demantra 7.2.X.X. Some of the "Required" columns in "BIIO_Promotion" table which is used to load promotion data`has been removed in Demantra 7.3. And some more "Required" columns are added in "BIIO_Promotion" table.
The disappointing thing is that the implementation and user guide doesn't speak about it. How the implementer know, what type of values to load in these mandatory columns to populate the promotion data in Demantra.
Regards,
Milind...

go to tables statements -
> double click on the structure----> it will takes you to that structure

Similar Messages

  • Table structure changes from PS HRMS 8.3 & 8.8 to PS 9.1

    Hi,
    Is there any delivered report (or) excel sheet explaining the table structure changes from PS HRMS 8.3 & 8.8 to PS 9.1
    Any help on this highly appreciated.
    Thanks
    Soundappan
    Edited by: Soundappan on Nov 1, 2012 7:04 PM

    I'm not sure to understand what kind of module you're talking about.
    Anyway, there are several docs available in MOS which shows the features differences over the versions, have a look :
    PeopleTools Cumulative Feature Overview Tool ID 793143.1*
    But I didn't find any starting by your (very old) Peopletools version.
    Nicolas.

  • Ho to track table structure changes ?

    Hi
    I need to know how to track the table structure changes ?
    I mean how to know when , which column was added/dropped/altered by which user for a table.
    Is there any DD view for the same in Oracle??

    user572632 wrote:
    Hi
    I need to know how to track the table structure changes ?
    I mean how to know when , which column was added/dropped/altered by which user for a table.
    Is there any DD view for the same in Oracle??refer auditing
    what is your oracle version?
    refer
    http://download.oracle.com/docs/cd/B10500_01/server.920/a96524/c25audit.htm
    http://www.oracle-base.com/articles/10g/Auditing_10gR2.php
    also check trigger,
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_7004.htm

  • Table structure changed in testing system after system refresh.

    Hi Team,
    Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
    Regards,
    Amit

    I believe System refresh only means refresh of data and it has nothing to do with table structure.
    Alas, you were wrong, after all table definition are data too, as program sources...
    You have to re-import every transport request which was not yet transported to production in your test system.
    Regards,
    Raymond

  • Oracle Data Pump - Table Structure change

    Hi,
    we have daily partitioned table, and for backup we are using data pump (expdp). we policy to drop partition after backup (archiving).
    we have archived dump files for 1year, few days back developer made changes with table structure they added one new column to table.
    Now we are unable to restore old partitions is there a way to restore partition if new column added / dropped from currect table.
    Thanks
    Sachin

    If a new column has been added to the table, you can import only the the data from the old structure to the new structure. Use the parameter CONTENT=DATA_ONLY.

  • Table structure changes

    Assuming that an OraLite 10g is now running on CE.Net and Msync is working fine to do data synchronization between Oralite 10g and an enterprise 9i database. If I make structure changes to a table on the enterprise database, how do I reflect the changes to the OraLite database on the CE.net device.
    Thank you.

    There's a good post about this on metalink...
    A) Add column
    1. Upload all client data. Clients should not add new data until they are told by the administrator to sync again!!
    2. Stop Mobile Server listener
    3. Change the Oracle8i/9i database schema (add column)
    4. Create a Java program to call the Consolidator Admin API AlterPublicationItem()
    5. Start Mobile Server
    6. Execute a sync from the client
    7. The new column should be seen on the client. Use MSQL to check snapshot definitions.
    B) Drop column
    1. Upload all client data. Clients should not add new data until they are told by the administrator to sync again!!
    2. Stop Mobile Server listener
    3. Delete column of the base table in the Oracle database schema
    4. Create a Java program to call the Consolidator Admin API DropPublicationItem()
    5. Create a Java program to call the Consolidator Admin API CreatePublicationItem() and AddPublicationItem().
    6. Start Mobile Server
    7. Execute a sync from the client
    8. The new column should be seen on the cliet. Use MSQL to check snapshot definitions.
    C) Change column datatype
    Changing datatypes in a repliatated system is not an easy task. You have to follow certain procedures in order to make it to work. Use DropPublicationItem, CreatePublicationItem and AddPublicationItem methods from the Consolidator Admin API. You must stop/start Mobile Server listener to refresh the cache.
    1. Client syncs. Clients should not add new data until they are told by the administrator to sync again!!
    2. Stop Mobile Server listener
    3. Drop/create column (do not use conversion procudures) at the base table
    4. Call DropPublicationItem(). Check if the ErrorQueue and InQueue no longer exist.
    5. Call CreatePublicationItem() and AddPublicationItem(). Check if the ErrorQueue and InQueue reflect the new column datatype
    6. Start Mobile Server. This automatically resumes application
    7. Client executes sync. This should drop the old snapshot and recreate the new snapshot. Use MSQL to check
    snapshot definitions.
    D) Drop table
    1. Client syncs. Clients should not add new data until they are told by the administrator to sync again!!
    2. Stop Mobile Server listener
    3. Drop base table
    4. Call DropPublicationItem(). Check if the ErrorQueue and InQueue no longer exist.
    5. Start Mobile Server. This automatically resumes application
    6. Client executes sync. This should drop the old snapshot. Use MSQL to check snapshot definitions.
    E) Add table
    1. Client syncs. Clients should not add new data until they are told by the administrator to sync again!!
    2. Stop Mobile Server listener
    3. Add new base table
    4. Call CreatePublicationItem() and AddPublicationItem() method
    5. Start Mobile Server. This automatically resumes application
    6. Client executes sync. This should add the new snapshot. Use MSQL to check snapshot definitions.
    F) Changing Primary Keys
    Chaning PK is a severe operation which must be executed manually. A snapshot must be deleted and recreated to propagate the changes to the clients. This causes a full refresh on this snapshot.
    1. Client syncs. Clients should not add new data until they are told by the administrator to sync again!!
    2. Stop Mobile Server listener
    3. Drop the snapshot using DropPublicationItem() method o
    4. Alter the base table
    5. Call CreatePublicationItem()and AddPublicationItem() methods for the altered table
    6. Start Mobile Server. This automatically resumes application
    7. Client executes sync. The old snapshot will be replaced by the new snapstot using a full refresh. Use MSQL to check snapshot definitions.
    G) To Change a Table Weight =>
    Follow the procedure below to change the Table Weight parameter. The table weight is used by the Mobile Server/Synchronization to determin the sequence in which client records are applied to the Oracle database.
    1. Run MGP to apply any changes in the InQueue to the Oracle databse
    2. Change table weight using SetTemplateItemMetadata() method
    3. Add/change constraint on the the base table which reflects the change in table weight
    4. Synchronize

  • Table-Structure Change

    Hi Guys!!!
    I have created a Z***** table n activated,now i want to change the data type from FLTP to CHAR but the thing is am getting an error "Structure change at field level (convert table Z******).what i supposed to do?
    Warm Regards,
    Mohandoss P.

    Hi,
    Along with that message i think u will get 'ok' and 'delete' button will come..
    please click on delete button.
    but make sure that the table field is not  using any where after deleting the table. other wise dependent programs will give dump.
    Regards
    Aravind.

  • Last time the table structure changed

    What is the best way to find out as to when a table structure was last changed? (Like adding or modifying a column) ?
    I queried LAST_DDL_TIME in the dba_objects view but the problem is that it stores the last time the table was truncated (using TRUNCATE TABLE table_name), as we do truncates often. I was interested in find out when the table was altered. Any ideas ?

    Hi,
    i think database trigger will do better according to your need....
    its simple and best.
    Just create a new table and database trigger.
    Like
    create table db_ddl_log
    username varchar2(30),
    ddl_date date,
    ddl_type varchar2(30),
    object_type varchar2(18),
    owner varchar2(30),
    object_name varchar2(128)
    create or replace trigger db_DDL_Trigger
    AFTER DDL ON DATABASE
    BEGIN
    insert into db_ddl_log
    username,
    ddl_date,
    ddl_type,
    object_type,
    owner,
    object_name
    VALUES
    ora_login_user,
    sysdate,
    ora_sysevent,
    ora_dict_obj_type,
    ora_dict_obj_owner,
    ora_dict_obj_name
    END;
    now check it.
    SQL> select * from db_ddl_log;
    no rows selected
    SQL> desc a
    Name Null? Type
    NO NUMBER
    SQL> alter table a add (name varchar2(1));
    Table altered.
    1* select * from db_ddl_log
    USERNAME DDL_DATE DDL_TYPE OBJECT_TYPE OWNER OBJECT_NAME
    SYS 06-MAR-06 ALTER TABLE SYS A
    SQL> truncate table a;
    Table truncated.
    sql> select * from db_ddl_log
    USERNAME DDL_DATE DDL_TYPE OBJECT_TYPE OWNER OBJECT_NAME
    SYS 06-MAR-06 ALTER TABLE SYS A
    SYS 06-MAR-06 TRUNCATE TABLE SYS A
    Thanks
    Kuljeet Pal Singh

  • Table Structure changed in Function Module

    Hello All,
    How to check the strcuture of the table " yrdb_tp10_map:
    got changed in the following FM.
    As its not working properly.
    function yrdb_tp10_get_mapping.
    ""Lokale Schnittstelle:
    *"  IMPORTING
    *"     REFERENCE(VARIANTE) TYPE  YDOMAENE
    *"     REFERENCE(DOMAENE) TYPE  YDOMAENE OPTIONAL
    *"     REFERENCE(OLD_VALUE) TYPE  YOVALUE OPTIONAL
    *"  EXPORTING
    *"     REFERENCE(NEUER_WERT) TYPE  YNVALUE
    *"  TABLES
    *"      YRDB_TP10_MAP TYPE  YRDB_TP10_MAP_TYPE
    *"  EXCEPTIONS
    *"      NOT_FOUND
    *"      WRONG_IMPORT
    tp10_map Feld über Zustand der globalen internen Tabelle
    g_yrdbtp10_map
    Wert X Tabelle gefüllt
      data: import(1) type c,
            tab_in type i.
      if tp10_map eq space.      "interne Tabelle leer.
        select * from yrdb_tp10_map into table g_yrdbtp10_map.
        sort g_yrdbtp10_map.
        tp10_map = 'X'.
      endif.
    prüfen der importparameter.
    wenn import = 'initial' beide Importparameter sind leer
    wenn import = 1 domaene gefüllt
    wenn import = 2 domaene und old value gefüllt
    wenn import = 3 nur old value gefüllt --> raise Exception wrong_import
      if domaene(1) ne space.
        import = '1'.
      endif.
      if old_value(1) ne space.
        if import = 1.
          import = 2.
        else.
          raise wrong_import.
        endif.
      endif.
    Vorbereitung der Rückgabe
    wenn import = 'initial' Rückgabetabelle vorbereiten Ebene VARIANTE
    wenn import = 1 Rückgabetabelle vorbereiten Ebene Domaene
    wenn import = 2 Einzelwert zurückgeben new_value
      case import.
        when space.
          loop at g_yrdbtp10_map into yrdb_tp10_map
                             where variante = variante.
            append yrdb_tp10_map to yrdb_tp10_map.
          endloop.
          describe table yrdb_tp10_map lines tab_in.
          if tab_in le 0.
            raise not_found.
          endif.
        when '1'.
          loop at g_yrdbtp10_map into yrdb_tp10_map
                             where VARIANTE    = VARIANTE
                             and   domaene     = domaene.
            append yrdb_tp10_map to yrdb_tp10_map.
          endloop.
          if tab_in le 0.
            raise not_found.
          endif.
        when '2'.
          read table g_yrdbtp10_map into yrdb_tp10_map
            with key     VARIANTE    = VARIANTE
                         domaene     = domaene
                         old_value   = old_value.
          if sy-subrc eq space.
            neuer_wert = yrdb_tp10_map-new_value.
          else.
            raise not_found.
          endif.
      endcase.
    endfunction.

    go to tables statements -
    > double click on the structure----> it will takes you to that structure

  • Table structure changes when using 'create table X as ( select * from X@remote_server )'

    I need to create and copy data from a remote Oracle server to a local server. The command I use is
    create table X as ( select * from X@remote_server )
    with remote_server is the tns name of the remote Oracle server.
    The local table is created and populated with data as expected but when I check the structure using 'desc X' it shows me all the CHAR fields of the local table are triple as large as of the remote table.
    I guess the problem is the difference  between the NLS_CHARACTERSET settings . The local charset is AL32UTF8 and the remote is  WE8MSWIN1252.
    How do I change the command to make the two tables have the same field sizes ?
    Thanks,
    Vu

    Do you want to be able to store all the data from the remote table in the local table?  Assuming you do, increasing the size of the column would be the correct behavior.
    By default, a VARCHAR2(10) allocates up to 10 bytes of storage.  In the Windows-1252 character set on the source, 1 character requires 1 byte of storage.  So a VARCHAR2(10) has space for up to 10 characters.  In the UTF-8 character set on the destination, however, 1 character can require up to 3 bytes of storage.  So a VARCHAR2(10) may allow you to store as few as 3 characters.  Since Oracle has no way of knowing what data you have (and will have) in the source system, it triples the size to ensure that all the data from the remote system will fit in the new table.  If you want the columns to be the same size on the destination that they are on the source, it is highly probable that you'll get errors inserting the data because at least one value will be too large for the destination column.
    Justin    

  • Suggestion required in target table structure change

    Hi all good morning,
    I have one requirement. I have a target table T with some coulmns. Now I need to add one additional column to T and one procedure is there to populate the data for new column. This target table T is used by 50 mappings.my questions is if we change the structure of the table do we need to import(I think we must import). If we import what could be the impact of this re-import. do we need to rebound and validate alla the mappings and then deploy?
    the other possibility what I can do is I will create a replica of T as T1 with one additional column. I will create a new mapping which dumps data from T to T1and I will replace my T with T1 in my reporting environment.
    pls suggest which is good one. it is urgent.
    thanks in advance.
    Viki

    Hello, if you don't need the new column in the 50 mappings, you can temporarily leave them alone (you say it's urgent), and just feed the new col..
    When you have more time, you should reconcile the mappings with table T and re-deploy them. OMBPlus scripting is ideal for this task.
    Hope this helps, Antonio

  • Oracle 9i Lite: Table structure changed

    Hello,
    how do I add a new column to a database table? I mean what actions to I have to take to add the column to the database on the server and how is this change transferred to the clients? Are these changes impossible to do with Oracle Lite?
    Stefan

    Yes, this is possible. There are two ways you can update the clients...
    1) repackage the app with the packaging wizard
    2) use the consolidator API - see the javadoc.

  • Error during transport-Structure change at field level (convert table /BIC)

    Hi,
    I am trying to transport from DEV to Test when I encountered this error.
    The tables are both consistent when I checked with SE14.
    Start of the after-import method RS_CUBE_AFTER_IMPORT for object type(s) CUBE (Activation Mode)
    Error/warning in dict. activator, detailed log    > Detail
    Structure change at field level (convert table /BIC/DZCRUSDI026)
    Table /BIC/DZCRUSDI026 could not be activated
    Return code..............: 8
    Following tables must be converted
    DDIC Object TABL /BIC/DZCRUSDI026 has not been activated
    Error when activating InfoCube ZCRUSDI02
    Error/warning in dict. activator, detailed log    > Detail
    Structure change at field level (convert table /BIC/DZCRUSDI023)
    Structure change at field level (convert table /BIC/FZCRUSDI02)
    Table /BIC/DZCRUSDI023 could not be activated
    Table /BIC/FZCRUSDI02 could not be activated
    Return code..............: 8
    Following tables must be converted
    DDIC Object TABL /BIC/DZCRUSDI023 has not been activated
    Error when resetting InfoCube ZCRUSDI02 to the active version
    How do I resolve this
    thanks

    Hi,
    There are no Inactive objects in the cube in DEV system. Also must of the changes I made in Test are already in the cube in TEST But the cube is not active.
    SAP proposed that the cube be activated manually but is not a good procedure to activate in TEST system.
    Error when resetting InfoCube ZCRUSDI02 to the active version
    Message no. RSO410
    Diagnosis
    Errors arose when activating InfoCube ZCRUSDI02. An active version already existed before the activation.
    System Response
    InfoCube ZCRUSDI02 could not be reset to the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
    Procedure
    The old active version of InfoCube ZCRUSDI02 can no longer be used. Remove the cause of the activation error and activate InfoCube ZCRUSDI02 anew.
    thanks

  • How to Change S012  Table Structure ..?

    Hi MM Experts,
    How to copy and how to create new structure  and new caracterstics and MAterial type from  table S012 .
    T-code for execute MCE1 .
    How to Change S012  Table Structure ..?
    Regards,
    Anthyodaya.
    Edited by: anthyodaya Reddy Nagaram on Jul 7, 2010 12:44 PM

    Anthyodaya,
    Values?  Your newly created infostructure will have no data until you define how to update the underlying tables, and then execute the update.
    You need to be a bit more specific.  Are you saying that you attempted a 1-to-1 copy of S012 into a new structure, and you got a failure?  What failure?  What error message?  If you have saved your new infostructure, you can run the consistency utility to see what if anything is missing/misconfigured  MCSCHECK.
    If you have no experience with infostructures, I suggest you enlist the services of an experienced person to assist you.  Especially if you intend to implement non-standard characteristics and values, this can be a complex task.
    SAP help in this area
    Creating new IS
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/3754f7449a11d188fe0000e8322f96/frameset.htm
    Purchasing Info system
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/c1/375504449a11d188fe0000e8322f96/frameset.htm
    Rgds,
    DB49

  • Using ADF against changing table structures

    Hello,
    We are developing a JSP app that will hit the same tables in different dbs/scheams, but the attributes (columns) of the tables could change (all except the primary key and name of the table). I want to write the app once and allow it to hit the same tables even if they have different columns (depending on what db is connected). As an example, using ResultSetMetaData I can easily "loop" thru through all column "labels" and then loop thru the ResultSet to display the data.
    I am assume that ADF would NOT be a good fit for this type of application but I wanted to see what others had to say.
    Thanks.

    The biggest problem is that the number of columns in the tables could differ. Is it possible/feasible to create dynamic ViewObjects based on the structure of the currently connect db? As in, once the app initially connects, it dynamically build the ViewObjects and then allows the app to access these ViewObjects as needed.

Maybe you are looking for

  • Concatenation messing up SQL query

    I have an array of SQL commands that need to get run. To run them, i'm doing this: quote: <cfloop from="1" to="#arraylen(queries)#" index="i"> <cfquery name="runquery" datasource="mydatasourcehere"> <cfoutput>#queries #</cfoutput> </cfquery> </cfloop

  • Multiple drop down menu items to populate the same separate text box. How can I do it?

    In Acrobat Pro X, I've figured out how to create a drop down menu with items that will populate a separate text box, but how can I get multiple menu items to populate the same text box. For example. My drop down menu has three items  cat, dog, mouse.

  • How can i accept meeting request on calendar

    Hello, How can I accept a meeting notice in my calendar?  The meeting will pop up but I do not have the choice to accept or decline. Thanks, KK

  • Ms Access 2010

    I have client that access Ms access through their network drive.  when one person is on the database the other one can't access the information.  How can I change it where they can access the information at the same time?

  • Unable to move photos between albums in search mode

    I am unable to move picture between albums when I have done a search for a title etc. eg. search for 'Leeds' brings up 20 pics one album and 15 in another, but the two albums are several years apart (possibly 100's of rolls!). Why am I unable to then