Dented ipod, USB cable doesn't fit :S

HELP! I dropped my ipod and the bottom has a dent in it and the USB cable won't fit in, will cost money to have it fixed at the apple store? Or will I have to get a new back??? please reply thanks.

If the store can "bend" the iPod case back, they will only exchange the iPod for refurbished one. The price will be:
Apple - Support - iPod - Repair pricing

Similar Messages

  • IPad 3 USB cable doesn't fit flush in back...normal?

    I notice when I plug the USB cord into my new iPad 3, it's flush in the front but not in the back. In the back, you can see part of the metal sticking out. Is this normal?
    Hard to believe Apple would not create a better-fitting cord for the iPad's sloped design...so I figured I'd ask. Worried I might harm my iPad with a defective cord.

    No, it is perfectly fine.  The iPad 2 is the same way, along with almost all the iPod Touchs, and the first 3 iPhones if I remember correctly.  The reason is so that you can have one cable for the iPad, iPhone, and iPods.  Trust me, if you use the cable from your iPad box, it will look the exact same.  Nothing to worry about.

  • PC shuts down when I plug the iPod USB cable in :(

    Hi,
    I have just bought an iPod Nano 8GB. Downloaded the latest version of iTunes and installed. Then as soon as plugged the USB cable into the PC it shut down instantly. I had to wait a good 5 minutes when before it would boot back up again. I have tried the front and rear USB port... but to no avail
    I running Windows Vista and my PC spec is as follows:
    AMD Athlon X2 4600 Dual Core
    2GB Corsiar RAM
    256MB GeForce 7600GS
    320GB SATA II HDD
    MSI K8N Neo2 Platinum with Nvidia nForce 3 Ultra Chipset (motherboard)
    The USB ports are all 2.0 compatible.
    My PSU is 400W.
    I have 3 USB devices plugged in the rear and nothing in the front. Devices connected are:
    Keyboard
    Printer
    Scanner
    I am sort of guessing the iPod USB cable is causing a surge of some sort, but I might be wrong.
    Does anyone have any ideas as to what the problem might be... and to fix it please?
    Many thanks,
    Gazza.

    Have you tried to use a different USB port on the PC?
    Does the same thing happen when you plug in a different USB device?
    Try a restart of the PRE and try again. Go to device info, reset options and select restart. Try again and see if you get the same error.
    When you get the Blue Screen Of Death in Windows, it ususally means that Windows has a problem and needs to be reinstalled.
    You could try to re-insall the usb drivers for your PC and see if that may resolve the BSOD error. You may need to contact the PC manufacturer for assistance in re-installing the USB drivers.
    For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
    http://kb.palm.com/wps/portal/kb/na/pre/p100eww/ve​rizon/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit,

    My desktop IMac OSX 10.6.8 : IMovie '11: Trying to upload a home movie clip from my Panosonic camera model PV-DV203D. I've had this camera several years, and used it with Windows desktop. Now trying to work with my Mac. I have a USB cable, both ends fit, but iMovie '11 does not recognize it. Is there a driver fix for this?

    What kind of Mac to you have?  This camera is a tape based DV one that connects best with firewire and I cannot tell if your Mac has firewire.  If your mac *does* have firewire, get a camcorder firewire cable and try again.
    ETA:  Oops, I am pretty sure that all the "desktop iMacs" have firewire, so you should be good to go.  You will probably need a cord that goes from FW800 to your camcorder.

  • Why tethering with USB cable doesn't work after IOS6.0 update?

    why tethering with USB cable doesn't work after IOS 6.0 update?

    Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

  • PCIE power cable doesn't fit!

    I didn't get a convertor with my MSI6800GT, as it was a demo sample, but my PSU supports 6 pin output, I did however get a cable thrown into the box at a last minute, which doesn't produce enough power.
    Cable 1:
    Normal ATI X800 pcie power cable, only fills two of the 6 pins in the 6 pin output, so doesn't produce enough power.
    PSU 6pin cable:
    doesn't fit!  The pin right under the attachment thing is square, on the other cable (which fits but doesn't have enough power) that's rounded and that fits fine.

    neuron,
    How about listing your specs and post some pix of the hardware in question.
    Take Care,
    Richard

  • Ipod Not working (burned by ipod usb cable)

    I connected my 20gb ipod to my pc with the ipod usb cable to transfer songs to my ipod, after about a minute or so by ipod got hot so i disconnected it and now my ipod wont turn on and it smells burned. What should i do, and will my warranty cover it?
    I would appreciate any help thank you!

    I think that the only way you'll find out if the warranty covers it is if you send it for service and let Apple look at it.
    http://depot.info.apple.com/ipod/
    Could be a battery problem (overheating).

  • Cable doesn't fit into back USB ports

    My front USB port isn't working...everytime I plug a cable into it I get a message that reads "Power Surge on Hub Port" and it won't connect. My ports in the back are functioning, but I cannot connect my iPOd into them because the cord doesn't fit. Is there something I can buy (like a mini extension cord) that will connect them?
    Please help I am so frustrated. thanks!

    thanks so much for your help...
    I'm using a Dell Computer (it has Optiplex GX270 written on it) with Windows XP. If you need more info just tell me where to find it.
    Even when I plug in a USB cable (one that isn't connected to a device), the message still appears. The iPod connector does fit in the front, but not the back ones. I know the back ones work because I plugged a camera into one in the back and it worked, (it didn't in the front).
    I would just use the back ports for my iPod too but the cable is a little different and won't work. I think there is excessive plastic on the connector?

  • USB cable no longer fits into iPad.

    My USB cable, which came with the iPad, no longer fits into the slot.  What do I do now to recharge my iPad?

    Use a vacuum cleaner to remove any dust or debris.
    Use a magnifying glass to examine the iPad's connector and the cable connector. May be a bent pin or the connector wraparound may be dented. If your iPad is in a case, take it out of the case.
     Cheers, Tom

  • Hdmi cable doesn't fit, upgraded from old 21 imac...5yrs old to new 27 imac..the hdmi plug doesn't fit. any suggestions?

    i used to have a hdmi input on my older 21 inch mac that displayed my imac on the lcd tv... the plug from the old imac won't fit into my new 27 inch imac.. any suggestions? also my firewire external hard drive plug doesn't fit into any of the inputs... yikes! Thanks for any help!

    Not sure what adapter cable you have but if your new machine is a mid 2011 iMac you need this cable. Not a replica of the cable you need the adapter cable Apple sells:
    http://store.apple.com/us/product/H1824ZM/A/Moshi_Mini_DisplayPort_to_HDMI_Adapt er?fnode=MTY1NDA3Ng

  • T510i eSATA/USB3.0 combo port: eSATA cable doesn't fit

    Hello,
    my T510i has a eSATA/USB3 combo port. I assume that an eSATA plug should fit in there. But the eSATA cable I bought doesn't fit. (It fits into my external hard drives eSATA port, though.)
    Can you help me with this, please?
    Thanks a lot in advance!
    Ben
    Solved!
    Go to Solution.

    Hi wt510,
    could you please post the Type and Model Number of your T510 along with the manufacture date, (shown after the s/n on the label), please do not post your s/n.
    Thanks in advance
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • IPhone 3G stock and first gen charging cable doesn't fit cleanly.

    Has anyone else noticed that the charging cord that came from apple doesn't fit cleanly into their iPhone 3G? Mine fits crooked. It still charges and everything but it just doesn't fit right. This is true for the cord that came with the phone and the old cord from my own phone.

    It should fit flush and straight. I use multiple cables (the one that came with the iPhone, a BT Travel Cable, an old Griffin cable in the car (the one with the pinch-to-release clasp) - they all fit flush and straight in the iPhone 3G.
    You might want to have yours checked out at an Apple Store.

  • Ipod Usb cable dead

    Hi
    My ipod cable (USB cable) is dead and its not working.. If i connect ipod with my cable the device is not recognized. I tried with my friends cable it worked fine. Do apple replace ipod cable ( am still under warranty period)? If so then how can i request Apple to send me the cable?..

    Service request.
    Or call into any Apple store.

  • USB cable doesn't connect

    My USB cable simply will not fit the port. Anyone else having similar problems?

    The standard usb to pc cable will have a gap of about 1.5mm (1/16") between the plug body and the playbook.
    Check for gold wires pressed up against the back of the socket which would indicate a ruined socket.
     it may be that it's far enough in but no connection- very common problem. It only needs to be plugged in upside down once to ruin the socket.
    If so, get a rapid charger which uses the three pin socket to the right of the usb,  and use wifi sharing for file transfer.
    Sarah.

  • Hi my iPad 2 charger the one with the USB port and a USB cable doesn't work anymore I've changed fuses even tried a different cable no luck HELP!!!

    HEEEELLLLLPPPP MEEE I'm going crazy!

    Sounds like you need to restore your Apple TV to factory settings.
    See this Apple document:
    http://support.apple.com/kb/HT4367
    You will need to use the "Micro USB Cable" to restore it to factory settings.
    See the article shown above.
    You must unplug the power cord before connecting the ATV to your computer....

Maybe you are looking for