Deployment issue on windows server 2008(64 bit)

Hi all,
I am using crystal reports 2008 trial version for my web application. Its working fine in development environment but when I deploy application in windows server 2008 64 bit edition it shows following error:"An error has occurred while attempting to load the Crystal Reports runtime. Either the Crystal Reports registry key permissions are insufficient, or the Crystal Reports runtime is not installed correctly. Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) containing the correct version of the Crystal Reports runtime (x86, x64, or Itanium) required."
Is there any resolution available for this problem except for changing the IIS settings for 32 bit applications?
Rgds

Read the following [article|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10d5fa88-2013-2c10-c9a5-f11963607d4e;jsessionid=(J2EE3417600)ID0244107750DB11172929121510648759End] as it goes over your issue.
Essentially you will have to set IIS to 32 bit at the least.
Jason

Similar Messages

Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)

Hi Forum,
I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
The application does not run and throws the following error in the event log.
Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
Please suggest me if i am missing something. Please let me know how can i debug this issue?

Hello,
Crystal reports XIR2 is not supported on Windows server 2008.
Check the supporting platforms guide here.
[Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
Thanks,
Bhushan.

Oracle ODBC version error on windows server 2008 64 bit

We had installed oracle 10g standard edition on windows server 2008 64 bit. After one hour use of ODBC connection, we are getting a error message like 'Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed'
Find the link for error message. http://www.google.co.in/imgres?newwindow=1&biw=1600&bih=1075&tbm=isch&tbnid=zc1Vas4O9Eqj4M:&imgrefurl=http://social.tech…
Please give solution for the said issue. Thanks in advance.

SAP said it is Oracle not support windows server 2008.

Problems installing OBIEE 11g on Windows Server 2008 64 bit

Hi, I'm trying to install OBIEE 11g on Windows Server 2008 64 bit (standard edition, SP2), and it's blowing up running the installer. The installer gets past the first couple of "info" screens, but blows up prior to coming to the first "real" screen with an error:
Microsoft Visual C++ Assertion Failed:
Program: ...
File: ../../../src/share/native/sun/font/t2k/t2kstrm.c
Line: 132
Expression: pos <= t->maxPos
Has anyone seen this and/or have an idea how to work around this? Note that I did do the prerequisite download / install of the 2005 Visual C++ 64 bit libraries.
Thanks,
Scott

Just to close the loop on this thread, this does indeed seem to be some sort of font / java issue on our servers. I've been completely unable to get the install to work using the GUI. However, if I run it from command line using the -silent and -response paramaters along with a proper response file, the install went perfectly. I'm going to continue working the SR with Oracle - don't want to be stuck using -silent mode when things get more complicated, but at least now I can move forward.
If anyone else has a better workaround - please let me know. "Silent" mode is workable, but difficult and time consuming.
Thanks,
Scott

How can I install and run lookout 6.1 on windows server 2008 64-bit without errors?

How can I install and run lookout 6.1 on windows server 2008 64-bit without any errors?
I was unable to start the lookout applcation after I install the lookout 6.1 on windows server 2008 64-bit.
(error code: 0xC0000142). Please help!
Thanks

This will pobably do http://joule.ni.com/nidu/cds/view/p/id/1051/lang/en but the major issue is that you should concentrate and read the instructions carefully. My two cents.
Dieet
Afvallen

Window server 2008 64 bit

Hi,
I plan to install and configure the environment in OS window server 2008 64 bit. OBIA 11g 64 bit,OBIEE 11g 64 bit,
Informatica 9.0 64 bit, DAC 7 32 bit. In my database is Oracle Linux 64 bit system.
Plz anyone suggest it is correct environment.
Thanks
Ganesh

You cant use DAC 64bit since there are some installation issues, you have to go with DAC 32bit (ref: ID 973777.1) on 64bit OS.
You can use TNSentries to connect with database from dac.
For any other issues(for DAC or OBIEE or Informatica) you have to go with Oracle Client 32bit on 64Bit OS.
Hope this helps, appreciate if you mark as correct/helpful
BTW: OBIA installers are 32 bit only. The OBIA installer can be run on Windows 64 bit.
Edited by: Srini VEERAVALLI on Dec 19, 2012 2:02 PM

What Drivers should I use to access SQL Server 2005 SP2 from Windows Server 2008 64 bit

and yes I do know that is an odd scenario so let me explain
I have just joined a project that is "in flight" where the customer is upgrading a LOT of things at the same time
(some Microsoft, some other supplier: some at the OS level, others at server or services levels)
the current step is replacing some services leaving the back end databases as they are
i.e. SQL Server 2005 SP2
a later step will upgrade the backend data bases which may make more work
What we have now runs on Windows Server 2003 32 bit using the OLEDB drivers
version 2000.86.3959.00
What we want must run on Windows Server 2008 64 bit still using the OLEDB option
which version should I download & try to install?

Here are a known list of issues with this configuration with their corresponding workarounds: https://support.microsoft.com/kb/936302/en-us
Satish Kartan www.sqlfood.com

Hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard

hp laserjet pro mfp m126nw printing issues in windows server 2008 r2 standard
printer installed but print not coming ...
please give me solutions of this problem

go to http://www.hp.com/go/tools may help resolve the issue.
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
I work on behalf of HP.

Oracle 10g xe 32 bit on windows server 2008 64 bit

I have windows server 2008 64 bit and oracle 10g xe 32 bit
does it work on ?
I have tested but no success.
Any one knows reasons

You seem to have posted threads before on very similar topics, and you also posted this once in the appropriate forum:
{thread:id=2270082}
Please avoid duplicating posts!
As already stated in one of your other threads, it is not a certified combination. Again, read the Installation Guide !
If you want to play with it and try to make it "work", that's up to you. And as you say you have already tried, with "no success", it seems you already got an answer.
I suggest you close this thread and continue in the dedicated 10g XE forum thread (or try the 11g XE Beta - only for 32-bit Windows yet, but there's a chance the general release will be aimed for Windows x64 as well).
Edited by: orafad on Aug 20, 2011 1:14 PM

Oracle 10.1.0.4 on Windows Server 2008 64 bits Standard

Hello,
For migratiion purposes, we would need to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard, and then upgrade it to 11g.
We have forced Oracle 10.2.0.4 installation on a Windows Server 2008 64 bits Standard, but we are not sure for 10.1.0.4.
Since we don't have that software version to try it and we are looking for it, is it possible to install Oracle 10.1.4.0 on a Windows Server 2008 64 bits Standard?
Could you point me out a document that reference Oracle versions compatibilty with Windows Server 2008?
Thanks

At MOS, click on the certifications tab, then enter database in the first drop down box, and select the rdbms. Then enter the relevant info in the other boxes, and then you will see Oracle Database 10.1.0.4.0 is not certified on Microsoft Windows x64 (64-bit) 2008 R2
Certification is a little more strict than supported, but extended support ended in January. REMINDER: Premier Support for Oracle Database 10.1 ends January 2009 [ID 761713.1]
There's always lifetime support, but your case shows how useful that can be.

Oracle 11g R2 to MS Access .mdb (Windows Server 2008 64-bit) problem

I have a need to make connection from Oracle 11g R2 to MS Access database file (mdb). OS is MS Windows Server 2008 64-bit. My configuration is next:
1. I made System DNS mikeacs (using c:\windows\sys_wow6\odbcad32.exe) to my access mdb file;
2. I made initmikeacs.ora file in ora_home\hs\admin folder:
# HS init parameters
HS_FDS_CONNECT_INFO = mikeacs
HS_FDS_TRACE_LEVEL = debug
HS_FDS_SHAREABLE_NAME = c:\Windows
3. Listener.ora file is:
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\Oracle\product\11.2.0\dbhome_1)
(PROGRAM = extproc)
(ENVS = "EXTPROC_DLLS=ONLY:C:\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
(SID_DESC =
(SID_NAME = mikeacs)
(ORACLE_HOME = c:\oracle\product\11.2.0\dbhome_1)
(PROGRAM = dg4odbc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = cspo02)(PORT = 1521))
4. Tnsnames.ora is:
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
MIKEACS =
(DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521))
(CONNECT_DATA=(SID=mikeacs))
(HS=OK)
5. After this, I restarted Listener:
lsnrctl stop;
lsnrctl start;
Given feedback:
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Production
Start Date 20-RUJ-2010 14:47:21
Uptime 0 days 0 hr. 0 min. 3 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\Oracle\product\11.2.0\dbhome_1\network\admin\listener.ora
Listener Log File c:\oracle\diag\tnslsnr\cspo02\listener\alert\log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "mikeacs" has 1 instance(s).
Instance "mikeacs", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
6. I created db link: create public database link macs using 'MIKEACS' (connected as sysdba);
7. tnsping mikeacs:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=cspo02)(PORT=1521)) (CONNECT_DATA=(SID=mikeacs)) (HS=OK))
OK (0 msec)
Then, when I try fire query (connected as sysdba): select * from mytable@macs;
get result:
ERROR at line 1:
ORA-28513: internal error in geterogeneous remote agent
ORA-02063: preceding line from MACS;
Although, when I fire the same query, but connected as other user, get next result:
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Microsoft][ODBC Driver Manager] Data source name not found and no default
driver specified {IM002}
ORA-02063: preceding 2 lines from MACS
Where is my problem? Please help. Thanks in advance!

That's the problem. DG4ODBC on 64bit Windows is 64bit and thus it also requires a 64bit ODBC driver.
If you don't find one - maybe you can install DG4ODBC 32bi on a 32bit platform (please do NOT install it on the 64bit Windows machine) and then use this 32biit DG4ODBC with the 32bit ODBC driver.
Another option would be to purchase a commercial ODBC driver or a bridged ODBC driver.

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.

Hi,
Installing Oracle SOA suite 10.1.3.1.0 on windows server 2008-64 bit.
Getting the following exception when installing BPEL
oracle.as.install.util.ActionFailedException : java.io.FileNotFound Exception :
D:\software\bpel\bpel_oc4j\install\log.properties(The system couldnot find the specified).
at oracle.as.install.action.LogConfigAction.execution(Unknown Source)
at oracle.as.install.util.ActionQueue.run(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
Caused by : java.io.FileNotFoundException : D:\software\bpel\bpel_oc4j\install\log.properties
(The system cannot find the specified file)
at java.io.FileInputStrem.open(Native Method)
at java.io.FileInputStrem.<init>(Unknown Source)
at oracle.as.install.action.LogConfigAction.execute(Unknown Source)
at oracle.as.install.util.ActionQueue.run(Unknown Source)
at oracle.sysman.oio.oioc.OiocOneClickInstaller.main(Unknown Source)
In the unzipped BPEL software folder for installation there is no such file.
Have installed several Oracle SOA suite 10.3.1.0 on windows server 2003 - 32 bit using the same software.
But now am using it along with a patch- p6712338 for windows server 2008-64 bit.

If this is a production instance, you should NOT read past this sentence -- contact Oracle support to do it right.
If this is just for testing/experiments, have you tried putting an empty file at D:\software\bpel\bpel_oc4j\install\log.properties? How about putting a copy of the file from one of your "windows server 2003 - 32 bit" installations?
Good luck, Andy

Database logon failed when deploy CR on Windows Server 2008

I use Crystal Reports for Visual Studio 2010 Production Release with MVC 2 web aplication and SQL Server 2008 database server. When I compile/run from VS 2010 it running well, but when deploy it on Windows Server 2008, when load certain report (Not All report) face the following exception message:
Database logon failed
Stack Trace is as the following:
at CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportOptions options) at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToStream(ExportFormatType formatType) at SequisLife.Controllers.ReportController.run_report(String report_name, IDictionary`2 dic_param)
InnerException:
System.Runtime.InteropServices.COMException (0x8004100F): Database logon failed. at CrystalDecisions.ReportAppServer.Controllers.ReportSourceClass.Export(ExportOptions pExportOptions, RequestContext pRequestContext) at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)
run_report method is as the following:
private ActionResult run_report(string report_name, IDictionary<string, string> dic_param)
            string ls_respon = "";
            try
                get_sqllogin();
                ReportClass rptH = new ReportClass();
                rptH.FileName = Server.MapPath(VirtualPathUtility.ToAbsolute(report_name));
                rptH.Load();
                rptH.Refresh();
                Database crDataBase;
                Tables crTables;
                TableLogOnInfo crTableLogOnInfo;
                ConnectionInfo reportConnectionInfo = new ConnectionInfo();
                reportConnectionInfo.ServerName = server;
                reportConnectionInfo.DatabaseName = database;
                reportConnectionInfo.UserID = login_user;
                reportConnectionInfo.Password = login_pass;
                crDataBase = rptH.Database;
                crTables = crDataBase.Tables;
                foreach (Table crTable in crTables)
                    crTableLogOnInfo = crTable.LogOnInfo;
                    crTableLogOnInfo.ConnectionInfo = reportConnectionInfo;
                    crTable.ApplyLogOnInfo(crTableLogOnInfo);
                ParameterFields lpf_parameters = rptH.ParameterFields;
                if (lpf_parameters.Count > 0)
                    foreach (ParameterField lpf_param in lpf_parameters)
                        var llst_tmps = dic_param.Where(d => d.Key == lpf_param.Name);
                        foreach (var param in llst_tmps)
                            if (param.Key == lpf_param.Name)
                                if (lpf_param.ReportName == "")
                                    rptH.SetParameterValue(lpf_param.Name, param.Value);
                                else
                                    rptH.SetParameterValue(lpf_param.Name, param.Value, lpf_param.ReportName);
                Stream stream = rptH.ExportToStream(CrystalDecisions.Shared.ExportFormatType.PortableDocFormat);
                return File(stream, "application/pdf");
            catch (Exception ex)
                ls_respon += ex.Message;
                ls_respon = " - "ex.StackTrace;
                ls_respon += " - " + ex.InnerException;
                ls_respon += " - " + ex.Source;
                ls_respon += " - " + ex.Data;
                return Content(ls_respon);
Please any body hepl me...
Thank's in advance

Hi,
I am using CR with visual studio 2010 in windows 7 box 64bit box. using a ADO.net data source. And I need to export .rpt as pdf.The solution works fine in my dev box. by when i try to deploy in a windows server 2008 R2 box (64bit) it fails . Both my dev box and deplyment box uses sql server 2008 DB . Also i am using .Net framework 4.0 (not client profile)
installed the following things in deployment box:
1. CRRuntime_64bit_13_0_1.msi in
2. Also copied the CRforVS_mergemodules_13_0_1 in C:\Program Files (x86)\Common Files\Merge Modules
I get the following error in my Box:
CrystalDecisions.ReportAppServer.ConvertDotNetToErom.ThrowDotNetException(Exception e)   at CrystalDecisions.ReportSource.EromReportSourceBase.ExportToStream(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.FormatEngine.ExportToStream(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.FormatEngine.Export(ExportRequestContext reqContext)   at CrystalDecisions.CrystalReports.Engine.ReportDocument.ExportToDisk(ExportFormatType formatType, String fileName)   at Tesco.Instore.PickingControl.ReportController.PrintDriverDocumentation(String driverDocumentation, Int32 vehicleTripId)] 20/10/2011 08:08:41        PCS        Critical                   Classic .NET AppPool      Error running End of Van [Logon failed.
Error in File temp_31b3196f-fd25-45c8-b657-5d9cd7c9dccb {4F74290C-D56E-4FC4-8DEF-371BB5C5B10B}.rpt:
Unable to connect: incorrect log on parameters.]
I also verified the database connection is upto date. while creating the solution
the project build is set to anyCPU.
is there anything else i have to install ?? Please help me ..I am trying this thing from last one week and have not got any proper solution till now

Support for JDeveloper 10.1.3 on Windows Server 2008 64 bit OS

Hello,
We are using JDeveloper 10.1.3.3.0 (patch # 9879989) for R12.
Would like to know support for Jdeveloper on windows server 2008 - 64 bit.
Thanks,
Swati.

Hi Swati,
Currently I am using Jdeveloper Patch#9172975 for R12.1.2 on windows server 2008 X64 and it works fine.
As Jdeveloper Patch#9172975 is lower version then Jdeveloper Patch#9879989, Patch#9879989 should work on Windows Server 2008 64bit.
Still I am not confirm about Jdeveloper Patch#9879989 on Windows Server 2008 64bit.
Thanks,
Laukik

Deployment issue on windows server 2008(64 bit)

Similar Messages

Maybe you are looking for