Depreciation missing for some past months..

Just now I have noticed that for an asset which has still useful life of 4+ years, has not been depreciated since May 2011. In 2011, depreciation was posted for January, Feb, March & April. After that I find another row for Planned depreciation for Dec 2011. I am wondering why depreciation for this asset was not posed from May to November ? Could you please help me to analyze the situation ?

No shutdown indicator is set in the depreciation key or asset master.
However, I find that the asset was capitalized on 30.04.2006. Useful life mentioned in the asset master is 5 years. Hence, in that case, the useful life 5 ends in April 2011. I find that depreciation was posted upto April 2011. Is that the reason why the depreciation was stopped after April 2011. (The settings in the depreciation base method, it is found that depreciation after planned life is not required).
So, can I assume that because of the above settings only the depreciation was stopped ?

Similar Messages

Can we run CK40N for the past month?

Hi All,
One of our users forgot to do the cost estimate for the month of May, that's why when he run CK40N (June 1), the prices went to future price, (i think because our MM is still May). I have some few questions and hoping for your positive feedback.
1.) If we open the June period, will the future price became present price? or we need to run again CK40N?
2.) Can we run CK40N for the past month of May? Reason is, we would like to capture the prices of Material last May.
Please advise.
Thank you in advance.

Hi Tina,
CK40N Meant for creatting cost estimates for the product and estimation is some wht which you create for future or current period. It is not possible to run ck40n for the past period.
Now since you said that period june is not opened in MM. you can not release the price i.e.ck40n for june. check the details fo costing dates you have put in the dates parameters in ck40n. If you have run ck40n for june then after marking the price system will set the price as a future price and same prices become the current price once you release the price. So if you r executing ck40n for june and june is not opened , you can not release the price. First u open the period june then execute the release functionality future price would automatically become the current price for JUNE.
Regards / Ashok verma

Wifi "unable to connect" for the past month

I have not been able to connect to my home wifi for the past month. It keeps popping up saying that it is unable to connect. sometimes it will work, but only for 2 minutes tops. My roommate uses the same internet connection and she said that she has not had a problem with it. I have tried rebooting it, turning it on airplane mode then resetting network settings and rebooting it, forgetting the network, and even resetting my entire phone. nothing will work. but my phone connects to the wifi at work and works perfectly fine. SOMEONE PLEASE HELP

The router in 99.99% of the time may be fine and see and connect to the devices it detects. However after certain updates to phones it has been said that the phone will not connect to the router.
There was a list of known routers on this forum that just did not work. The so!ution was to either reset the broadband modem, wireless router and turn off the phone.
Then if it connects your problem is solved. If it doesn't your next step is to see if there are firmware updates for the modem and the router. (Mainly routers) if it still does not connect a new router not on the non working list should be purchased. Yes its another expense but if you want the device to connect that is your option.
Another trick you can use is to change the security from WEP to WPA, PSK or WPA 2 and change the password to the router.
Some people stated a password of at least 9 figures / digits worked great.
If you placed the phone on its own IP address that also has been known to work.
However its best to talk to tech support at the router maker to assist.
Good Luck

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Cost and/or Conversion Rates are missing for some planning resources

Hi,
In Workplan of projects, we are facing a issue "Cost and/or Conversion Rates are missing for some planning resources". even though the schedules for the project WP is defined.
Any inputs on this is highly apprciated. Thanks !!!
Regards,
Pallavi

Did you check the Cost for all the Planned Workplan Budget Lines. Generally, this type of error comes when the Quantity is defined but the Cost is missing for any Line. Find that Planned Workplan Budget Lines and enter the Cost for them and save it.
I hope it may help you.
Regards,
Khan.

HT201250 Is there a way to change the intervals at which Time Machine performs backups (e.g., weekly instead of hourly or daily) past 24 hours, daily for the past month, and weekly for everything older...

Is there a way to change the intervals at which Time Machine performs backups (e.g., weekly instead of hourly or daily) past 24 hours, daily for the past month, and weekly for everything older...

You can edit the interval in Console or install a Pref Pane
called TimeMachineScheduler (Leopard or higher) free from:
http://www.klieme.com/TimeMachineScheduler.html
Good luck, Tom

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

For the past month, I've had an echo of my voice while I'm talking on my phone. It's very annoying and sounds like multiple people are speaking at the same time and it's only me. Anyone know what's wrong?

Final Cut Pro X: What's Missing for Some Pros

Final Cut Pro X: What's Missing for Some
See:
Creative cow:
Walter Biscardi

The floppy drive is a horrible analogy. One could still use the external floppy drive, as you say. But what your analogy is ignoring is that at some point that floppy drive option will disappear as a later OS rolls out and the floppy drive is no longer supported, however the other people I am innvolved in working on a project need me to have a floppy drive to pass along my work.
Yes, I can use FCP7 as I need to for the time being (and will do so) but you can bet that won't be the case for all that long. Eventually the ability to use FCP7 will decline as OS changes etc. In the meantime you can bet that the broadcast and film world is not going to change their delivery specs and requirements simply because Apple decided to change FCP to X and ditch the genuinely PRO features of FCP7. There are too many Avids and other options for them to decide that they will change just because a portion of the professional editing world has been forced into Apple's way doing things. They will simplu say, "Get an Avid . . ."
So the floppy analogy not so accurate.

Depreciation freeze for some asset for some months.

Hi
assets have been capitalized on 01.01.2012 and depreciation has been run for 1 and 2 month now the cleint requirement is that, they want to stop depreciation for some assets up to April and calculate the depreciation again from 01/05/2012. Please suggest what should we customize for this issue.
Your feedback would be highly appreciated.
Regards,
Danish
Edited by: danish01 on Mar 7, 2012 9:07 AM

Hi Danish,
One possibility is to use Shut Down feature.. and the other is using a depreciation key 0000, which is a time dependent depreciation feature and is available only from ECC 6.0 EHP4 onwards..
Before EHP4, if u use depreciation Key 0000, system reverses the entire epreciation posted in that year in that particular month, but from EHP4 onwards, system does not reverse if you use 0000 depreciation key, but only posts Zero depreciation for those months when you have applied 0000, As soon as you restore your original depreciation keys, it will again post normally..
Hope this helps..
Regards,
SAPFICO

Need to delete the requirements in md61 screen for the past month

Hi Gurus,
I am having one requirment that my client need to auto delete the md61 screen entries , Suppose the requirement is maintained for 1000 the planned order will also generated for 1000 qty if stock is not available , then the production is done only for 500 quantities. On the next MRP run the system is considering again the past month 1000 quantities .
How we can restrict this? If suppose the balace 500 quantities also the user dont want to produce . Then how can we delete automatically .
Pl help me out this.

Hello Vishnu,
You can delete the old PIRs when the new month begins through batch job for MD74/MD75/MD76.
Other way is to define a period of adjustment for the MRP Group in transaction OMPG and assign the MRP group to your material. Please refer F1 help there
Adjusting in the past, that is the period of adjustment is calculated backwards - the system starts from today's date and calculates backwards by the number of days specified. Thus, planned independent requirements that lie before the date calculated by the system are not included in the planning run.
Please refer
MD61 considering Past requirements
Best Regards,
R.Brahmankar

Firefox update download for my Mac in zip code 96822 just runs and runs without downloading anything. Has been happening for the past month. ???

Over the past month, when Firefox indicates it has an update for me, and to download it, all I get is "connecting" and nothing happens. We live in 96822. This is for a Mac.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

Purchase Order missing for some of the Sales Order for few customers

Hi All,
There are few sales orders for which corresponding PO is missing.
But most of other Sales orders for the same set of customers, PO is coming.
Could you please enlighten me how this PO is assigned to the Sales order or it is updated with the Inbound Idoc ..
In any case what may be the reason for PO missing for these sales order...How I can explore this...?
Thanks,
Sanjeet

Hi sanjeet,
If your IDOC is ORDERS05, Check if you are getting the PO Number in : E1EDK01-BELNR
Regards,
Ravi

StoreFront : Payment and Shipping group relationships are missing for some orders

Hi Team,
In our application, we are able to see relationship between payment and shipping group for some orders. But we are not able to find these relationships for some orders.
We are verifying in "dcspp_payship_rel" table. We are wondering why this behavior is happening for some orders.
Could you please suggest to move further ?
Regards,
Babji...

Hello.
First of all you must ensure that you are properly using transactions when you create/update the orders.
There are best practices to update the orders in ATG that must be followed to avoid loss of information.
Like this steps below:
Acquire a write lock using the ATG lock manager.
Start the transaction.
Synchronized on the Order object.
Update the Order.
End the synchronization.
End the transaction.
Release the lock.
Here are some links that should help you understand the steps to be followed to make a correct update of an order:
https://atgoasis.wordpress.com/2014/08/28/best-practices-for-updating-an-order-in-atg-commerce-applications/
http://www.digitalsanctuary.com/tech-blog/java/atg/design-pattern-for-updating-an-atg-order.html
http://sumangalavijay.blogspot.com.br/2011/10/atg-update-order.html
Oracle ATG Web Commerce - Managing Transactions in Oracle ATG Web Commerce
Hope it helps you! =)

Statistics missing for some tables in sys after scheduler job ran

In a 10g database, the scheduler automatically has the job set up to gather the statistics for the sys schema. I noticed the job was disabled for some reason so I enabled it yesterday and it ran last night. I didn't see any errors for last night's scan.
I have looked at sys.all_tab_statistics and noticed that there are many tables in sys that have a last_analyzed date of last night but there are also many tables that have a last_analyzed date that is a long time ago. For example, the argument$ table has stats from 8/21/06. Also, the scheduler window did not close before the job finished.
Some of the tables that weren't scanned report 'YES' in the 'STALE_STATS' column.
Why doesn't the GATHER_STATS_JOB gather stats for all of the tables in sys and only some of them?
Ideas?

Check whether statistics gathering is locked. You can use below query
SQL> select stattype_locked,table_name from dba_tab_statistics where table_name
like '%ARGUMENT%';
STATT TABLE_NAME
ARGUMENT$
SCHEDULER$_JOB_ARGUMENT
SCHEDULER$_PROGRAM_ARGUMENT
CWM$ARGUMENT
If you find stattype_locked column null, then i believe it is to do with monitoring stuff.
Regards,
Satheesh Babu.S

Iphone 4 will not sync with cloud, just tells me it failed and try again for the past month

my iphone 4 will not sync with teh cloud. I tried deletaing the backup on the cloud adn starting a new one, I tried resetting cloud on my iphone adn still an error that jsut says it had an error and try again later for over a month now. any suggestions?

Hi not sure if Im leaving this is in the right place but here is my issue:
I have an iphone 4s and everything is working, including syncing it except that I have shot two videos that are 30 and 60 minutes that are not showing up on itunes. Therefore, I cannot save them and delete them off my phone. Curiously, when I view my phone on itunes it is showing on the content summary (color coded bar on the bottom of the screen) that the 'other' type content is 13 GB. I don't have other content and I am positive itunes is not recognizing them as video but 'other'. Any thoughts on this? My phone is full and don't want to delete these two interviews I shot. Thanks.

Depreciation missing for some past months..

Similar Messages

Maybe you are looking for