Depreciation run - What does field Ref. Document mean?

Hi All,
I am trying to post the depreciation run for the period 7. I would just like to know where the values for the field Ref. Document is being picked up from?
Currently in test mode, i am getting the value 8, i would like to know if it is related to the period i am posting to ( as it should then be 7)
Please reply asap.

Hi
please see note 890976 !
Best Regards,
blaz

Similar Messages

FI-AA Depreciation Run :what does I need to run depreciation (AFAB trans.)

I don´t know what I need to run depreciation, I have create a fixed asset, and I have done a posting f-90 , and afterwards I want to execute depreciation but I cannot ¿what does I need to do this ?
Thanks in advance.
Olga.

Hi,
First of all before running depreciation you need to give the required GL accounts needed for posting the depreciation to the GL accounts in T.Code AO90.
Then after doing the required configurations u can run a depreciation run only in the month end or in the next month for the previous month.
If u had posted transactions to an asset using F-90 say suppose in october, u can do the depreciation in the month of october or in the coming month.
hope it is clear.
regards
srikanth.

I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.

I understand that when using Numbers/Pages - an up-arrow on a document means that the file is still to be uploaded to the cloud, what does a down arrow mean? It seems the document can't be accessed until the arrow clears.

I believe what it's supposed to mean is that some changes were made to the document on another device, and those changes were saved back to the cloud. Now you've opened iWork on a different device to access that document - it compares the document you've got locally with the one in the could, sees some recent changes and downloads them.
What gets me is why this sometimes happens even when I've not made any changes to a document from another device.

What does (error code -600) mean?

What does (error code -600) mean?
I received this code in a pop up window while trying to open iTunes from my Apps folder.

procNotFound
= -600, /*no eligible process with specified descriptor*/
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Any change?

What does the RHD symbol mean when using the multiple speakers?

i have two 1st gen apple TVs and when i pull up the multiple speakers prompt, i see an acronym "RHD" after each device.
what does the RHD symbol mean when using the multiple speakers?
typically i was used to seeing the Apple TV-1 vs. Apple TV-1-RHD??
What is the difference?

It's been modified to run Remote HD.
http://remotehd.com/

What does this error message mean? disc recording not found

What does this error message mean? disc recording not found

Often it suggests issues with device filters in your registry. But it's probably best to check the situation more closely.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

What does the following code mean???

what does the following code mean ??
fpm.raiseReviewAndSaveEvent(IFPM.EVENT_REVIEW, IFPM.EVENT_SAVE, vcFormEditButtons);
thanks in advance.
can you please tell me best site to learn WD4J coding.
site having lot of WD4J code examples

Hi,
While Creating an FPM View we can use this line code.For more details of above line
[code|http://help.sap.com/erp2005_ehp_04/helpdata/en/fc/ffd8464eb041848ca66749165d8f33/content.htm]
Please look at these documents for WDJ Example Application. Please go through this documenst.
[WDJ Application|Web Dynpro Java Tutorials and Samples NW 2004 ] and [Samples for Web Dynpro Java|http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/00b64d9f-fea2-2910-c988-ee2544047f8c] and [Web Dynpro for Java Demo Kit|http://wiki.sdn.sap.com/wiki/display/WDJava/WebDynproforJavaDemo+Kit]
Hope this is help full for u
Regards
Vijay

What does pump motor stalled mean? HP Office Jet Pro 8500 Premier

what does pump motor stalled mean? HP Office Jet Pro 8500 Premier

Hi maryhelt,
You can click here to go to a document that will help you learn about the pump motor stalled error message for your printer. It will also help you troubleshoot this message.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

What does scratch disk full mean? My photoshop elements 2 won't initialize.

What does scratch disk full mean???

If your scratch disk were really full, it would mean that there's not enough space left on your hard drive for PSE to do its calculations. But usually that error message means your hard drive is too big. PSE 2 can't see a 1 GB drive, for instance. It wants 750MB or less. If you use windows you can possibly get around it by partitioning your hard drive, if you think it's worth it. There's no way to make PSE 2 run on a current mac.

What does this error message mean: "Filename: Mips32.ari TFTP Error: 'File not found' in AP-105"?

Question: What does this error message mean: "Filename: Mips32.ari TFTP Error: ‘File not found’ in AP-105"?
Product and Software: This article applies to AP-105.
The root cause of this error is that the AP cannot perform a code upgrade.
Scenario 1
Check the ArubaOS code.
The minimum requirement to bring up an AP-105 is ArubaOS 3.3.3+ or ArubaOS 3.4.1+.
If the controller is running pre 3.3.3 code, upgrade the code to fix the issue.
Scenario 2
If the AP is not connected to the controller directly, bring up the AP in the controller and then connect it to the desired location. This process loads mips32.ari to the AP so that the AP can upgrade the code.
Scenario 3
The AP has no power adapter and you want to use the PoE feature. A few controller series like the 200 and 3000 Series do not support PoE. In this case, the AP cannot be terminated physically in the controller. Instead, connect the AP to the PoE switch, which is connected to the controller. Then assign a static IP configuration for the AP using the following commands:
apboot> setenv ipaddr <ip address>
apboot> setenv netmask <netmask>
apboot> setenv gatewayip <ip address of the gateway>
apboot> setenv master <ip address of the master>
apboot> setenv serverip <ip address of the TFTP server>
apboot> setenv bootcmd tftp
apboot> save
apboot> boot
Locally configure the TFTP server for the AP and load the mips32.ari file from the controller with the help of the TFTP application.

I want to download this file Mips32.ari for AP-105 device. Please give me this file download link. APBoot 1.2.4.4 (build 26618)
Built: 2011-01-07 at 13:42:04Model: AP-10x
CPU: AR7161 revision: A2
Clock: 680 MHz, DDR clock: 340 MHz, Bus clock: 170 MHz
DRAM: 128 MB
POST1: passed
Copy: done
Flash: 16 MB
PCI: scanning bus 0 ...
dev fn venID devID class rev MBAR0 MBAR1 MBAR2 MBAR3
00 00 168c 0029 00002 01 10000000 00000000 00000000 00000000
01 00 168c 0029 00002 01 10010000 00000000 00000000 00000000
Net: eth0
Radio: ar922x#0, ar922x#1Hit <Enter> to stop autoboot: 0
Checking image @ 0xbf100000
Invalid image format version: 0xffffffff
Checking image @ 0xbf800000
Invalid image format version: 0xffffffff
eth0 up: 1 Gb/s full duplex
DHCP broadcast 1
DHCP IP address: 192.168.x.xx
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 192.168.x.xx
DHCP DNS server: 192.168.x.xx
DHCP DNS domain: xx
ADP multicast 1
ADP broadcast 1
ADP multicast 2
checksum bad
ADP broadcast 2
checksum bad
ADP multicast 3
checksum bad
checksum bad
checksum badRetry count exceeded
DNS request 1 for aruba-master to 192.168.x.xx
checksum bad
checksum bad
checksum bad
T Using eth0 device
TFTP from server 192.168.x.xx; our IP address is 192.168.x.xx
Filename 'mips32.ari'.
Load address: 0x2000000
Loading: checksum bad
T T checksum bad
T checksum bad
checksum bad
checksum bad
T checksum bad
checksum bad
T T checksum bad
T checksum bad
checksum bad
T T T
Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplex
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum badARP Retry count exceeded; starting again
eth0 up: 1 Gb/s full duplexchecksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad
checksum bad ThanKs :)

I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

I got an iphone from Hong Kong which is locked one. Can anyone explain me what does a locked iphone means. How do I use it in India now, with my own sim card. How do I unlock it???

If your iPhone is locked to a wireless provider, only that wireless provider
can unlock it. Contact the wireless provider in Hong Kong to see if they
offer unlocking and if you qualify.
If your iPhone is locked to an AppleID that you do not know, return it for
a refund as it is useless. Only the person whose AppleID was used for
activation can remove the lock. There is no workaround for Activation Lock.
If neither of the above is what you are facing, provide more detail so someone
may offer a solution.

I was playing with my ipad settings (it's an older model) and noted in the advanced settings of Safari there was a place to view website databases. When I clicked on this I saw websites. How do these get there and what does the space amount mean?

I was playing with my ipad settings and noted in he advanced settings of Safari there was a place to view "website databases". When I selected this I saw a multitude of websites.
Can anyone tell me how these get there? Can a website be posted even if it was never went to? What does the space amount mean? For example, 1.5 kb...is this quite a bit? Would it indicate someone has gone to a site multiple times?
I share my ipad with my teenage daughter and I'm trying to find out if she's lying to me. Obviously she's swearing that she has "no idea" how these got there and I'm trying to keep her safe (she's only 14).
Thanks everyone.
Concerned Mom

Think of your PC and the 'temporary internet folder' where it keeps cached copies of web pages or elements off a web page for 'quicker display the next time you visit'. That's pretty much what that folder is. 1.5K is tiny. Probably just a basic page with some text on it. (you might be confusing 1.5K with 1.5 megabyte....megabyte is large...it's roughly 1000 kilobytes, so the 1.5K is a tiny file)
As far as I know, the only way info gets into that folder is if the browser has been to that site.
if you have a concern there are browsers out there, McGruff is one i've seen recommended, that allow some degree of parental control and supervision. That or you could passcode lock the iPad or enable the restrictions to turn off some parts of the device to have some control.

I have many photos that are visible as thumbnails in the Pictures Library, however when I try to open them in a big screen they show a back screen with an exclamation mark in a triangle. What does this exclamation mark mean ?

I can see my images in the libarary as thumbnails but when i try to edit/email some of them become Exclamation Marks in a triangle.
What does the exclamation mark mean and how to i retrieve the photo

The exclamation make is an indication that iPhoto has broken the file path to the original photo.
Make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. How do I avoid this on my Mac (Mavericks)? Thanks for your help!

What does "extracted channel PDF" mean and why does it continually duplicate on my desktop? I think it happens when I move a file in Finder to another file and when I copy some web files. I have to immediately move to trash all the duplications on my desktop. How do I avoid this on my Mac (Mavericks)? Thanks for your help!

What application is set to open PDF files? If you CNTRL click on the file and open with Preview does the problem occur?
If not change the default application to open PDF files to Preview.
You can do this by highlighting the file and either use CMD i or Get Info , this will open a window with the info on the file with an option to change the application that opens the file.
That's all I can think of.

What does "on my mac' mean and how do i delete or reduce the number of items in there?

What does "on my mac" mean and how do i delete or reduce the number?

Hi ya
I'm seeing this on my email screen, on the left hand side - under the "RSS Apple". The number of items in there is now 752. It's preventing me from sending and receiving emails in my AOL account.
Any help would be deeply appreciated.
Thank you.

Depreciation run - What does field Ref. Document mean?

Similar Messages

Maybe you are looking for