Derivation of Commitment Item from Material and Services codes

Hi experts,
I need to derivate a Commitment Item from Material and Services codes, because the many material and services are related with the same financial account.
I have seen that material codes appears in Source Fields, but service codes not.
Can you indicate me if exist some option to derivate commitment item from Services Codes?
Thanks a lot in advance.
Regards,
José Luis

Hi,
You can add fields to the source:
https://scn.sap.com/thread/1969599
Regards,
Ming

Similar Messages

Cannot derive commitment item from account 300100 in company code XYZ

Hi SAP Guru's,
We are trying to Post the Student Fee Cal amount to the GL A/c. While posting the same thru Student File in SLCM. we are encounting the following Error-iam working on 6 Ver.
"Cannot derive commitment item from account 300100 in company code XYZ
Message no. CMAC_FEE_CALC329"
I have activatyed the Find mamagement, & Derivation rules in the same.
and also given Commitment item in the GL A/c 300100.
Pls help & Also Pls help how to mention Commitment Item in Cost Element.
Regards,
Pradeep.J

Hi
Please check the note 499768.
https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=499768
Hope it helps.
Karthik

Material and Service in a Single Line Req

Hi
We hv a requirement of material and service in a single line item, Exampls is client ordering some fabrication work to one vendor. It involves both matl and service changre.
For the matl cost we need to calculate VAT and for the service charge we need to calculate service tax.
For ex 1000 is the total amt for a line item. In this 600 to be calaulated for VAT 4% and for balance 400 to be calculated as serv tax 12.5%.
The same is happening in sales and they can be do this. How tro do the same in MM purchasing.
Vijay

Hi
Can it be possible to make a PO only one line item. Say item 10 thats only one item. That line 10 have both matl and service.
Both matl tax and service tax need to be calculated for the line item 10.
Is this possible.
Client dont req these as 2 line items. Here the scenarion and req is like that.
Vijay

How to put material and service in the same order

I want to put the material and service in the same order. How do it input different taxes. and also migo for one material item and other service item.

HI,
In your scenario create material and service PO using T-code ME21N as follows.
1) Select PO document type, vendor and PO date
2) PO first line item account assignment 'N' if project and give input data material code,plant,storage location,qty,rate,delivery date and tax code.
3) PO second line item account assignment 'K', item category 'D',material short text for service, plant,storage location,material group data's are input given and press enter it will open 'Service Tab' in Item Detail Menu.
4) In item Detail Menu - Service tab you will give Service no.,qty,gross price for the above service material activity and service tax code in Invoice TAB and then check PO and SAVE.
5) After getting PO approved by top management.
6) PO first line item, you will do MIGO and PO second line item you will do ML81N service entry sheet.
7) On the vendor bill, you will mention material document number (GRN no.) & Service sheet number and given to accounts dept.. They will book vendor bill and give payment.
Hope, it is useful for you and solve your requirement.
Regards,
K.Rajendran

Material and Service PO

Hi
Can material and service PO be linked together?
Can we maintain delivery terms in the PO?
Regards
Soumen

Hi,
Linking Material & Serive PO means as I understood is
You can create both Material purchase & Service Procurement in the Same PO creation ME21N here in the line item you can maintain the Material and for service maintain the Item category as " D" with Account assignment category
" A".
Delivery terms can be maintained Item texts or header texts and can be shown in your PO print out .
rgds
Chidanand

Can you delete an item from itunes and get your money back???

hi!!! can u please tell me if you can delete an item from itunes and get your money back???
Thanks XD

You can certainly delete it, but you won't get your money back.
Stedman

It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer

It doesn't work when I press "transfer purchased items from ipod" and I don't know specidicly whitch item I need to transfer.
Whenever i press "transfer purchased items from ipod", itunes sync's for about 3 seconds, but I still can't install updates on the ipod without itues warning me about purchased items on the ipod, that aren't in the itunes library. I've tried folowing the steps in itunes help, but I can only find a step guide for when you know the specific item that needs transferring, and I donøt know that specific item.

This Apple Tech Note explains the process:
http://support.apple.com/kb/ht1848
It will transfer all purchased items that the computer you are transferring to is authorised to play: you don't have to select the items.

HT4009 I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases.

I have purchased items from CityVille and they are not available in the App although my card has been charged for the purchases. I also have an email receipt with the purchase. Can you please tell me how to resolve this issue?

iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919

Non-stock material and service material

What is
1) The difference between non-stock material and service material? and
2) The difference between text material and service material?
Give the example and how to configure it into sap.

hi
1) The difference between non-stock material and service material?
1.A. non stoc material goes with NLAG Eg: Office supplies such as stationary & service materials goes with DIEN material type
2) The difference between text material and service material?
2.A. there is no any text material as a seperate master data in MMR & DIEN (services).
please chec the sap liabrary in it SAP has explained it very well.
regards
balajia.
Edited by: balaji timmampalli achari on Nov 14, 2010 3:10 PM

How do I delete items from Exchange and resynch to fix a bug in Apple Mail?

How do I delete items from Exchange and resynch to fix a bug in Apple Mail? Mail does not synch with iCal. Many more Mail problems that may need this fix.

Is This you want...?
The best solution is the one you find it by yourself
Attachments:
BD_Image.JPG ‏9 KB

Security/Calls and Services Code for Pantech Hotshot

I have been trying to get assistance with this issue from Verizon on and off for more than six months, and am so disgusted by the absolute unwillingness to help me displayed by Verizon that I can't think of anything that would motivate me to continue service beyond the contract end date.
I want to be able to utilize the security options on the device to restrict outgoing calls and messages being made by an unauthorized person on my phone. This feature is standard on even the most basic phone models by virtually ALL mobile service providers.
However - when I follow the instructions to access the menu to select these settings, I am confronted with a request for a 4 digit "Calls and Services code". According to ALL printed and online information from Verizon, the default pin is the last 4 of the phone number. As I have NEVER been able to access the Calls and Services menu to ever even set up a pin, then the last 4 of phone number default should be the only possible code.
But the phone rejects that PIN. As it also rejects the PIN I established under Security/Phone Only.
So, Verizon folks - can anyone tell me WHAT THE $%# I AM SUPPOSED TO DO NOW???

Robin - thank you for the response, but unfortunately it did not work. It
reset the '"Phone Only" lock code, but I still receive the 'Incorrect Code'
error message when I try to access the "Calls & Services Code". This is
important to me because I am unable to prevent anyone who picks up my phone
from making calls, changing settings, etc by setting security measures
against it. That has been a standard feature in wireless phones for many
years now, and even the most basic phone models allow for this. So I am
perplexed about why I am unable to do so with this phone.
On Sun, Jan 5, 2014 at 8:15 PM, Verizon Wireless Customer Support <

Any send is-retail material and transaction codes

Hi,
i am new to is-retail. i need is-retail material and transaction codes.
1.how can i found article hierarchy?
2.transaction code for article creation?
3.transaction for country, zone, state, city, store, concepts?
4.transaction code for product category?
Regards,
venkat.

Please look at
Master Data in SAP Retail: Some deep hints
Regards
B

Is it possible to bill together a FERT material and service item.

Hi All,
I have request from the user where in they want to bill together a service and fert material.
Scenario.
1. Sales order creation with material one FERT and other service ITEM.
2. Delivery creation for both item. Stock should be reduced for FERT item and system should not ask for stock for service item.
Single PGI document for both.
3, Single billing for both FERT and service item.
Please confirm is it possible to implement.
Any guidance is highly welcomed.
Regards
Jalaj

2. Delivery creation for both item. Stock should be reduced for FERT item and system should not ask for stock for service item.
Single PGI document for both.
Yes delivery will be created for both FERT and Text items and system would reduce the stock to FERT item only not for Text item(TATX) because at the time creating sales order it self for text line item qty would be Zero so at the time of PGI system will not reduce any qty.this is standard only.
Please note for text items we don't maintain the material master and order qty also you can observe is in grey mode.
And coming into billing why you want bill the text item? usually in standard for text items the pricing is not relevant this you can observe in the definition of TATX(VOV7).
And finally you can combine the both the materials in single billing.
1. Goto VF04 select order related billing and delivery related billing or
2. by entering vf01 enter the delivery and order and try to save it.
Please check the above and let me know your results.
thanks,
Srinu.

FM Service Activity Code derivation to commitment Item

Hi,
we are in the process of implementing BCS Fund Management. Our Client want to control budget for Service Activity code entered in Purchase Order.
So we want the derivation rule as Service Activity code derives commitment Item, but not found any standard way for same.
PLease suggest if any have done the same or any idea about it.
Thanks
Vijay

Hi,
You can add fields to the source:
https://scn.sap.com/thread/1969599
Regards,
Ming

BAPI FOR Deleting a Schedule Line Item from EKES and EKET tables

Dear All,
I would like to for deleting one of the line item from EKES (Po Confirmation ) and the respective line item from the EKET(PO Schedule Line Item Table).
Assume that am allowing the user to select the lineitem from zprogram screen and collecting the PO and Its LIne Item details in an internal table.
Can i Use
<b>BAPI_PO_Change</b> , if so , can anybody tell me the steps to follow to use this bapi for deleting the PO lineItems, since i m going to try BAPI for First time.
pls help me out
Message was edited by: Raja K.P

Hi raja ,
loop at iekko1.
    w_index = sy-tabix.
    item-po_item   = itemx-po_item   = iekko1-ebelp.
    item-quantity = iekko1-mng01.
    itemx-quantity = iekko1-mng01.
    if iekko1-wamng = iekko1-wemng.
    itemx-no_more_gr = item-no_more_gr = 'X'.
    else.
    itemx-no_more_gr = item-no_more_gr = ''.
    endif.
    append item.
    append itemx.
      clear return[].
      call function 'BAPI_PO_CHANGE'
           exporting
                purchaseorder = iekko1-ebeln
           tables
                return        = return
                poitem        = item
                poitemx       = itemx.
      if return[] is initial.
      commit work and wait.
      call function 'DEQUEUE_ALL'.
search for deletion fields which u have to mark 'X'.
before calling this BAPi u have to lock the PO by using ENQUEUE.
<b>
FU BAPI_PO_CHANGE
Text
Change purchase order
Functionality
Function module BAPI_PO_CHANGE enables you to change purchase orders. The Change method uses the technology behind the online transaction ME22N.
Alternatively, the IDoc type PORDCH1 is available. The data from this IDoc populates the interface parameters of the function module BAPI_PO_CHANGE.
Functionality in Detail
Authorization
When you create (activity 02) an Enjoy purchase order, the following authorization objects are checked:
M_BEST_BSA (document type in PO)
M_BEST_EKG (purchasing group in PO)
M_BEST_EKO (purchasing organization in PO)
M_BEST_WRK (plant in PO)
Controlling adoption of field values via X bar
For most tables, you can use your own parameters in the associated X bar (e.g. PoItemX) to determine whether fields are to be set initial, values inserted via the interface, or default values adopted from Customizing or master records, etc. (for example, it is not mandatory to adopt the material group from an underlying requisition - you can change it with the BAPI).
Transfer
Purchase order number
The PurchaseOrder field uniquely identifies a purchase order. This field must be populated in order to carry out the Change method.
Header data
The header data of the Enjoy purchase order is transferred in table PoHeader.
Item data
The item data of the Enjoy purchase order is stored in the tables PoItem (general item data). Changes regarding quantity and delivery date are to be made in the table PoSchedule.
Use the table PoAccount to change the account assignment information.
Services and limits
Changes to existing items cannot be carried out with the Change method. It is only possible to create new items.
Conditions
Conditions are transferred in the table PoCond; header conditions in the table PoCondHeader. A new price determination process can be initiated via the parameter CALCTYPE in the table PoItem.
Vendor and delivery address
The vendor address in the table PoAddrVendor and the delivery address in the table PoAddrDelivery can only be replaced by another address number that already exists in the system (table ADRC). Changes to address details can only be made using the method BAPI_ADDRESSORG_CHANGE.
Partner roles
You can change all partners except the partner role "vendor" via the table PoPartner.
Export/import data
Export/import data can be specified per item in the table PoExpImpItem. Foreign trade data can only be transferred as default data for new items. Changes to the export/import data of existing items are not possible.
Texts
Header and item texts can be transferred in the tables PoTextHeader and PoTextItem. Texts for services are imported in the table PoServicesText. Texts can only be replaced completely.
Version Management
You can make use of the Version Management facility via the table AllVersions.
Return
If the PO was changed successfully, the header and item tables are populated with the information from the PO.
Return messages
Messages are returned in the parameter Return. This also contains information as to whether interface data has been wrongly or probably wrongly (heuristical interface check) populated. If a PO has been successfully created, the PO number is also placed in the return table with the appropriate message.
Restrictions
With this function module, it is not possible to:
Create subcontracting components (you can only use existing ones)
Create configurations (you can only use existing ones)
Change message records (table NAST) and additional message data (this data can only be determined via the message determination facility (Customizing))
Attach documents to the purchase order
Change foreign trade data
Change service data
Change or reexplode BOMs
A firewall prevents the manipulation of data that is not changeable in Purchasing according to the business logic of the purchase order (e.g. PO number, vendor, etc.).
PO items with an invoicing plan cannot be created or changed using the BAPIs
In this connection, please refer to current information in Note 197958.
To change addresses with numbers from Business Address Services (cantral address management), please use the function module BAPI_ADDRESSORG_CHANGE.
To change variant configurations, please use the function module BAPI_UI_CHANGE. More information is available in the BAPI Explorer under the Logistics General node.
In the case of changes that are to be made via the BAPI_PO_CHANGE, a firewall first checks whether the relevant fields are changeable. This approach follows that of the online transaction. Here it is not possible to change the vendor or the document type, for example.
Example
Example of changes made to a purchase order with:
1. Change in header data
2. Change in item
3. Change in delivery schedule
4. Change in account assignment
5. Change in conditions
6. Change in partners
Parameter: PURCHASEORDER 4500049596
Parameter: POHEADER
PMNTTRMS = 0002
PUR_GROUP = 002
Parameter: POHEADERX
PMNTTRMS = X
PUR_GROUP = X
Parameter: POITEM
PO_ITEM = 00001
CONF_CTRL = 0001
Parameter: POITEMX
PO_ITEM = 00001
PO_ITEMX = X
CONF_CTRL = X
Parameter: POSCHEDULE
PO_ITEM = 00001
SCHED_LINE = 0001
QUANTITY = 10.000
PO_ITEM = 00001
SCHED_LINE = 0003
DELETE_IND = X
Parameter: POSCHEDULEX
PO_ITEM = 00001
SCHED_LINE = 0001
PO_ITEMX = X
SCHED_LINEX = X
QUANTITY = X
PO_ITEM = 00001
SCHED_LINE = 0003
PO_ITEMX = X
SCHED_LINEX = X
DELETE_IND = X
Parameter: POACCOUNT
PO_ITEM = 00001
SERIAL_NO = 01
GL_ACCOUNT = 0000400020
Parameter: POACCOUNTX
PO_ITEM = 00001
SERIAL_NO = 01
PO_ITEMX = X
SERIAL_NOX = X
GL_ACCOUNT = X
Parameter: POCOND
ITM_NUMBER = 000001
COND_TYPE = RA02
COND_VALUE = 2.110000000
CURRENCY = %
CHANGE_ID = U
Parameter: POCONDX
ITM_NUMBER = 000001
COND_ST_NO = 001
ITM_NUMBERX = X
COND_ST_NOX = X
COND_TYPE = X
COND_VALUE = X
CURRENCY = X
CHANGE_ID = X
Parameter: POPARTNER
PARTNERDESC = GS
LANGU = EN
BUSPARTNO = 0000001000
Help in the Case of Problems
1. Note 197958 lists answers to frequently asked questions (FAQs). (Note 499626 contains answers to FAQs relating to External Services Management.)
2. If you have detected an error in the function of a BAPI, kindly create a reproducible example in the test data directory in the Function Builder (transaction code SE37). Note 375886 tells you how to do this.
3. If the problem persists, please create a Customer Problem Message for the componente MM-PUR-PO-BAPI, and document the reproducible example where necessary.
Customer Enhancements
The following user exits (function modules) are available for the BAPI BAPI_PO_CREATE1:
EXIT_SAPL2012_001 (at start of BAPI)
EXIT_SAPL2012_003 (at end of BAPI)
The following user exits (function modules) are available for the BAPI BAPI BAPI_PO_CHANGE:
EXIT_SAPL2012_002 (at start of BAPI)
EXIT_SAPL2012_004 (at end of BAPI)
These exits belong to the enhancement SAPL2012 (see also transaction codes SMOD and CMOD).
There is also the option of populating customer-specific fields for header, item, or account assignment data via the parameter EXTENSIONIN.
Further Information
1. Note 197958 contains up-to-date information on the purchase order BAPIs.
2. If you test the BAPIs BAPI_PO_CREATE1 or BAPI_PO_CHANGE in the Function Builder (transaction code SE37), no database updates will be carried out. If you need this function, please take a look at Note 420646.
3. The BAPI BAPI_PO_GETDETAIL serves to read the details of a purchase order. The BAPI cannot read all details (e.g. conditions). However, you can use the BAPI BAPI_PO_CHANGE for this purpose if only the document number is populated and the initiator has change authorizations for purchase orders.
4. Frequently used BAPIs for purchase orders are BAPI_PO_CREATE, BAPI_PO_CREATE1, BAPI_PO_CHANGE, BAPI_PO_GETDETAIL, BAPI_PO_GETITEMS, BAPI_PO_GETITEMSREL, and BAPI_PO_GETRELINFO.
5. For more information on purchase orders, refer to the SAP library (under MM Purchasing -> Purchase Orders) or the Help for the Enjoy Purchase Order, or choose the path Tools -> ABAP Workbench -> Overview -> BAPI Explorer from the SAP menu.
Parameters
PURCHASEORDER
POHEADER
POHEADERX
POADDRVENDOR
TESTRUN
MEMORY_UNCOMPLETE
MEMORY_COMPLETE
POEXPIMPHEADER
POEXPIMPHEADERX
VERSIONS
NO_MESSAGING
NO_MESSAGE_REQ
NO_AUTHORITY
NO_PRICE_FROM_PO
EXPHEADER
EXPPOEXPIMPHEADER
RETURN
POITEM
POITEMX
POADDRDELIVERY
POSCHEDULE
POSCHEDULEX
POACCOUNT
POACCOUNTPROFITSEGMENT
POACCOUNTX
POCONDHEADER
POCONDHEADERX
POCOND
POCONDX
POLIMITS
POCONTRACTLIMITS
POSERVICES
POSRVACCESSVALUES
POSERVICESTEXT
EXTENSIONIN
EXTENSIONOUT
POEXPIMPITEM
POEXPIMPITEMX
POTEXTHEADER
POTEXTITEM
ALLVERSIONS
POPARTNER
Exceptions
Function Group
2012
</b>
regards
prabhu
Message was edited by: Prabhu Peram

Derivation of Commitment Item from Material and Services codes

Similar Messages

Maybe you are looking for