Design view screen does not display body region

I was working in Dreamweaver 5 using the split screen.  I was updating a page in the code view and during the work the design view screen stopped showing the editable body region.  I only see the template fields which I cannot change of course.  I may have clicked something by accident on my laptop, but not sure.  Other pages show the body region in design view fine.  The page displays fine in browsers.  How do I get the design view to show the whole page?

I tried your suggestion.  I had to create a blank page to do it, but no luck.  It is the only page that does not display the the body region.  I can't help but think I "set" something to change the view properties but cannot find what is different.  FYI - Here is the page as it currently exists on the web.
http://riedmannfamily.com/adamriedmannfamily.html
Here is a screenshot - no EditRegionBody shows

Similar Messages

  • Main Viewer Window does not display correctly

    Ever since I upgraded to Aperture 3.3 through 3.4.1, the main viewer window does not display correctly.  Everything is justified to the right of the screen.  When viewing images, the are not in teh center, they are over to the right.  I can't even see the import controls when trying to import... actually I can't even press the import button or add metada.  I am really in a bad position here.  Need help with this... anyone out there have a solution please?  my clients are waiting for their photos.  Yikes!
    Right justified?
    No Import Controls?
    Faces -  Everything displayed in a single row, runs off the end of the right side of the screen

    Have a read through this page and follow the directions to delete your application preferences,
    Let us know how you go.
    Tony
    http://support.apple.com/kb/HT3805
    Message was edited by: Tony Gay

  • T500 Windows 7 - Screen does not display - Switchable Graphics Problem

    Hello,
    I have a T500 and I recently upgraded to Win7. Evrething was fine until I tried to install the drivers for the graphic cards and went on in BIOS and selected to use the integrated graphic card option. After reboot everything turns on except for the display. The fan works, everything looks OK but the screed does not display anything. I even tried to boot directly from the Win7 disk and install a fresh copy (maybe it would have been a better idea to do that in the first place) but it's the same, nothing happens. I don't know what else to try.
    Please help.
    Thank you.

    UPDATE: I just came back after a visit to the apple service provider here in New Delhi. They have replaced the logic board on my macbook pro and guess what? the situation is still the same. No difference what so ever as far as the screen resolution is concerned. I can still see those black bars in the exact same places i.e. the right hand side as well as on the top of the screen. Even the size of the black bars are still the same.
    I am so upset right now. After trying my best in order to solve this problem I went to the AASP with high hopes. I was very confident that after replacing the logic board this annoying problem would go away but unfortunately that's not the case. Even the Apple Engineer was clueless on how to solve this problem.
    I think I'll call apple care and speak to the customer relations regarding a replacement.
    If any of you can come up with a solution to this problem please let me know.
    I'm all ears!!!

  • Variable Screen Does Not Display in Bex Web Analyzer after first time

    We recently upgraded from BW 3.1 to BW 7.0 (without upgrading specifically to 3.5).  We are having a problem with our Web Bex Analyzer not showing the variable screen although the variable screen is displayed successfully when running the same query from the Bex Analyzer.  Based on feedback from other posts regarding similar topics, we modified the 0analysis_pattern template to ensure that Display Variable Screen was checked on.  We are finding that when we open the Web Bex Analyzer and do a New Analysis, the first query we try to run will always have the variable screen displayed successfully.  Any susbsequent queries we try to run by clicking on New Analysis in that same open window will not show the variable screen and will start executing open ended.  This is occurring regardless of whether the query has mandatory or optional variables and we have confirmed that there is no personalization set for the variables being used.  We have tried it with several different queries and the results are consistent.  The first query you run shows the variable screen successfully and any queries run after that do not.  Any help in resolving this would be greatly appreciated as we have exhausted our resources researching and troubleshooting this problem.

    We did open an OSS note and heard back from SAP.  We made the recommended setting, see their response below, but as they stated, it will only show variable screens for queries that have at least one mandatory variable entry after the first query is opened. 
    Response from SAP: 
    Please check if the following setting is made within your template --
    In the 'Standard Actions' of the Web Template, do you have the setting
    'Action Before First Display' set to OPEN_VARIABLE_DIALOG
    The behaviour of the variable screen is different if you use mandatory
    variables and optional variables. If you have only optional variables,
    the Display Variable does not force the variable screen.
    Also, using the parameter VARIABLE_SCREEN=X only influences the
    web application at STARTUP. This would not come into affect when you
    use the 'New Analysis' button. This button resets the dataprovider so
    this would not affect the variable screen and would not redisplay the
    variable screen as you require.

  • How can I reduce the display width of Firefox: I have my monitor in portriat mode, and the right side of the screen does not display.

    How can I reduce the size of the Firefox monitor display?
    I use my monitor in portrait mode, and the right side of the Firefox window is not displayed.

    Try using this extension. <br />
    https://addons.mozilla.org/en-US/firefox/addon/textarea-cache/

  • PO Document (View Document) does not display Korean Characters

    Hi,
    We have a situation here. In Production, the asian characters are not being displayed in PO Document
    Navigation: Purchase Orders - > Inquire -> View Document
    Surprisingly, a cloned environment of PROD displays the asian characters fine. Has anyone come across a similar issue?
    This uses the XML Publisher template stylesheets. Both PROD and QA have the same style sheets. The template is setup with language as Korean.
    It would be great if anyone can please guide me troubleshoot this issue and identify the cause.

    Thanks for your response.
    I did check the fonts under $OA_JRE_TOP/jre/lib/fonts and $AF_JRE_TOP/jre/lib/fonts folders in both QA and PROD environments.They are identical and albany fonts do not exist under them. But Korean characters are visible in PDFs generated under QA but not in PROD.
    Is there a profile option set to guide XMLP to a folder for fonts? Please let me know.
    Also, the JDK upgrade happened a couple of weeks before and PROD is pointing to JDK 1.5 but QA is still pointing to JDK 1.4 (cloned from a copy week earlier from PROD upgrade).

  • Splash screen does not display correctly

    Hello everyone. I have a class which shows a spashscreen. When run from the main method it display the splash correcly.
    I have a login module. When the login is sucessful , I call the splashcreen module. Here the problem arises. It just gives me the white background. The image is not there.
    I also encounter this sort of problems when calling other panels from my mainpage. The panels have a background. When called for the first time they appear distorted. When a second time they are called( by clicking the menu button from my mainpage) everything displays correctly.
    I am very confused with the above problem because there is simply no error in the coding. I can't see where the problem lies.
    Please Please Help me! I'll be indepted to you all!

    This is my class that I've written that works fine. Feel free to use it.
    * SplashScreen.java created on May 14, 2003
    * Copyright (c) 2003 Rene Peters Consultancy.
    * This software is the confidential and proprietary information of Rene
    * Peters Consultancy ("Confidential Information"). You shall not
    * disclose such Confidential Information and shall use it only in
    * accordance with the terms of the license agreement you entered into
    * with Rene Peters Consultancy.
    package nl.renepetersconsultancy.util.gui;
    * An application to show a title screen in the center of the screen
    * for the amount of time given in the constructor. This class includes
    * a sample main() method to test the splash screen, but it's meant for use
    * with other applications.
    * @author Ren� Peters
    * @version 1.0 May 14, 2003
    import java.awt.Dimension;
    import java.awt.Toolkit;
    import java.net.URL;
    import java.util.logging.Logger;
    import javax.swing.ImageIcon;
    import javax.swing.JLabel;
    import javax.swing.JPanel;
    import javax.swing.JWindow;
    public class SplashScreen extends JWindow implements Runnable {
    private Logger logger = null;
    private int minimumDuration;
    private String resource;
    private boolean keepRunning = true;
    private boolean waitForStop = true;
    private boolean done = false;
    * Constructor for the SplashScreen. Only used for initialisation. Nothing really happens yet.
    * @param resource Location of the image (jpeg, gif, png or xbm)to be displayed in the SplashScreen.
    * Image must be located somewhere on the classpath. E.g. "nl/petersconsultancy/planner/gui/logo.jpg".
    * @param minimumDuration The time in milliseconds the SplashScreen will be displayed, at least.
    * It can not be stopped before that. Values must be in the range [0, ->]. If smaller the 0 the will be
    * set to 0.
    * @param waitForStop Boolean to indicate if the object will be displayed after the minimumDuration has passed
    * by calling the "pleaseStop" method or if it will stop being displayed anyway.
    * background or the rest of the execution should hold for a while.
    public SplashScreen(String resource, int minimumDuration, boolean waitForStop) {
    logger = Logger.getLogger("nl.renepetersconsultancy.util.gui.SplashScreen");
         if (minimumDuration < 0) {
              this.minimumDuration=0;
         else {
         this.minimumDuration = minimumDuration;
    this.resource = resource;
    this.waitForStop = waitForStop;
    Thread thread = new Thread(this);
    thread.setDaemon(true);
    thread.start();
    * Check if the minimumDisplay time has elapsed already.
    public boolean isDone(){
         return done;
    * Request this from being displayed and have it removed.
    public void pleaseStop(){
         keepRunning = false;
    * Display the SplashScreen.
    public void run() {
    // Build the splash screen.
    if (resource==null) {
    logger.warning("The image to display in the SplashScreen is set to 'null'.");
    return;
    } else if (resource.equals("")) {
    logger.warning("The image to display in the SplashScreen is set to an empty string.");
    return;
    URL URLImage = this.getClass().getClassLoader().getResource(resource);
    if (URLImage==null) {
    logger.warning("The resource for the image to display in the SplashScreen can not be found.");
    return;
    ImageIcon imageIcon = new ImageIcon(URLImage);
    JLabel label = new JLabel(imageIcon);
    // Set the window's bounds, centering the window.
    // Take the dimension of the icon for reference.
    int width = imageIcon.getIconWidth();
    int height = imageIcon.getIconHeight();
    Dimension screenDimension = Toolkit.getDefaultToolkit().getScreenSize();
    int x = (screenDimension.width-width)/2;
    int y = (screenDimension.height-height)/2;
    this.setBounds(x,y,width,height);
    JPanel content = (JPanel) this.getContentPane();
    content.add(label);
    // Display it while running for a while in the background.
    this.setVisible(true);
    try { Thread.sleep(minimumDuration); } catch (Exception e) {}
    done = true;
    if (waitForStop) {
         while (keepRunning) {
    try { Thread.sleep(100);} catch (Exception e) {}
    setVisible(false);
    this.dispose();
    public static void main(String[] args) {
    SplashScreen splash = new SplashScreen("nl/renepetersconsultancy/util/gui/images/Ape.jpg",500, true);
    while (!splash.isDone()){
    try { Thread.sleep(50000); } catch (Exception e) {}
    splash.pleaseStop();
    System.exit(0);

  • HTML document on initial screen does not display

    Hi,
    In thread Links on Login Screen
    there is a description on how to display a html document in stead of a image on the initial SAP screen.
    I tried this (uploaded a html document, set MIME editor, and customized the SSM_CUST table),
    just to displaying a simple text like "Hello World", but however i keep getting a blank screen without anything in it on the initial screen.
    If I display the uploaded html file in transaction smw0 (selecting it, and pressing the glasses),
    a browser window opens and shows the expected content.
    Any idea what i have missed, or what i can check?
    Thanks
    Rolf

    Is it a blank html screen that you uploaded?
    Try crating a html page with some content and then try to configure it.
    Also, did you follow all the steps as -
    Change the logo in the right-hand side of the initial screen
    -   To put your company logo in the right-hand side of the initial
        screen:
        Put your picture in the database with the transaction SMW0
        "Binary data" options, e.g. in ".GIF" format.
        <b>Put a record with the picture name in the key "START_IMAGE" of
        the table SSM_CUST in the View maintenance transaction SM30.</b>
    -   You can adjust the picture to the window size automatically or
        center it in the right-hand side of the initial screen    
        ("RESIZE_IMAGE" "YES" or "NO" in the table SSM_CUST).
    -   You can deactivate the picture globally so that noone sees it
         with "HIDE_START_IMAGE" "YES" in the table SSM_CUST.
         User-specific picture display settings are then ignored.

  • Screen does not display when coming out of standby when screen turned off after timing out

    my dx7 2185dx laptop, running win8.1x64, just started a problem recently.  I run a backup program every night after I go to bed.  The backup program puts my laptop to SLEEP when the backup finishes.
    My setting for lid closure is to do nothing other than turning off the display, no Hibernate nore Sleep.
    If i leave the screen open when I go to bed, the PC starts up the next time OK. 
    If I had closed the screen, the PC starts up OK the next day, except the screen is blank.  No combination of screen display keys turns it on.  I know the PC is OK because I can remote into it from another PC.
    When the display is blank, I press the power buitton, which I have set to Hibernate the laptop,  It comes out of Hibernate mode with the display functioning normally.
    I have WIN update set to get and install updates automatically.  Windows Update says al is up today after I did a manual check today.  I ran a utility that I have that checks all of my drivers.  It said all were up to date.

    I highly recommend that you change your Windows update setting from automatic to download updates available but let me choose to download or install them.  
    There have been some recent Windows 8.1 updates which caused enough BSOD events for Microsoft to yank them from the Windows Update servers.
    Your issue might be resolved by running the system file checker utility at the command prompt.  That is certainly worth trying.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • 7970 LCD screen does not display anything

    Hi everybody,
    When I power up Cisco IP phone 7970,these button flashes in sequence:
    headset, mute and speaker. Then line keys start flashing green in sequence. Then headset button start flashing green.After 15 seconds everything stops. Switch Catlyst Express 500 sees through CDP protocol IP phone 7970, but IP phone doesn't get IP address from DHCP server.When I try factory reset, after all line keys flashe yellow, I press 123456789*0#, line keys don't flashe red but green. And again after 15 seconds, everything dies. What is wrong with my phone?
    Best regards,
    Marija

    Hi
    I had a phone in a similar state, it was completely useless... I built a console cable for it, and could see it trying to TFTP a particular image from the server - this image wasn't on the server and I'm sure it never was... I suspect it must have been the original load or something.
    Anyway - make a serial cable, and plug it in. Start up the phone, and see what the debug shows you - it's quite easily readable.
    You should be able to see where it fails. To fix mine I had to put the software it was looking for on the TFTP server and it fixed itself - I had to get someone on this forum to supply me the software as I couldn't find it anywhere...
    Serial Cable (same for 7970 and 7960 regardless of software):
    http://www.cisco.com/en/US/products/sw/iosswrel/ps5187/prod_troubleshooting_guide_chapter09186a0080558541.html#wp1041428
    Aaron
    Please rate helpful posts

  • JavaScript does not display in Design view

    Hi,
    I am just starting to learn JavaScript so excuse my, maybe stupid, questions.
    Why the following code does not display Hello world! in Split view on the "design" side? When I upload the file onto the server and try to view it in the browser everything displays normally.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>Homepage</title>
    </head>
    <body>
    <script type="text/javascript">
    document.write("Hello World!");
    </script>
    </body>
    </html>

    Hi,
    This is normal, design view is simply a way of either creating your website using the wysiwyg method or if you code the website it is a way of getting an idea what the site will look like static.  Design view doesn't run any scripts, which is why in the more recent versions of dreamweaver we have LiveView which does run the scripts and allow you to interact with drop down menus and the like, which you can't do in DesignView.
    Richard

  • CM14 BI Publisher - modifying an existing Data Model, the Graphic View in Query Builder does not display

    I am trying to edit the default forms/reports that come with CM14, trying to edit the data model, data set, (to get to the old Infomaker style graphic view) , the Query model does not display (error the list of tables is too long..) Oracle tell me the limit is 60,  there are not 60 tables referenced in any CM report.
    Does this Query builder view work at all on any report?
    (bigger question, we are moving from CM12, should we move to CM13 which works with infomaker?)
    Thanks,
    Paul L

    Kurt, thanks for your replies.
    A couple of notes/clarifications.
    1.     You are correct that BI works better in Firefox--I have observed issues with the BI display when using IE.  I would recommend using Firefox too.
    2.     You are correct about the way to get to the Query Builder to see a graphical view of data tables.  There are basically two issues with this that I mentioned, but will re-iterate:
    a.  If you have an EXISTING query in the data set, then click the "Query Builder" button, this will remove the existing query that's there, it will NOT display the existing query in the query builder.  Query Builder works only to create a NEW query from scratch.
    b.  Query builder is limited to selecting 60 fields max in your query.  If you are creating a large report with many tables, you may find that 60 fields is not enough.  For that you will have to work in the SQL edit screen rather than using the query builder.
    I would impress on anyone developing CM14 reports that they become familiar with the database schema and relationships to avoid problems when developing your BI reports.  You should be able to find the tables and joins documentation in the knowledgebase.

  • Finder does not display icon for word / excel in list view

    Hi,
    I got a new macbook air, with Yosemite pre installed. I copied over all my files (from my old macbook using a USB drive) and next I installed MS office for mac.
    For some reason Finder does not display the correct excel of word icon in list view (I set preview thumbnail to NO in view options), but it it displays the generic file icon.
    It appears to be very random, as some files do display the icon and others do not. It also appears to have nothing to do with the doc/docx xls/xlsx variations.
    Also some of my parallels icons do not display correctly in list view.
    When I open a INFO panel, it does show the correct icon. Example below:
    Any body know how to reset / fix this ?

    Still got no solution...
    There has to be some one that knows about this ..?
    Any professionals reading this that can point in some direction for a solution?

  • Firefox does not display the basic menu line File Edit View etc. How do I get this menu to show. I have tried uninstalling and reinstalling, but that does not help

    When I ask for help finding bookmarks, the answer tells me to click on bookmarks as shown in the illustration, but there is no such line displayed on my computer.

    '''''"Firefox does not display the basic menu line File Edit View etc."''''': That is the Menu Bar; see below.
    '''<u>Menu Bar</u>''' (File, Edit, View, History, Bookmarks, Tools, Help)<br /> <u>Firefox 3.6.x versions allow the user to hide the Menu Bar.</u><br />
    *Tap the ALT key or the F10 key, Menu Bar will display, click View, click Toolbars, click Menu Bar to place a check mark next to it, '''''OR'''''
    *Press and hold the ALT key while pressing the letters VTM on your keyboard, then release the ALT key
    *See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    '''<u>Other Toolbars</u>''', see: https://support.mozilla.com/en-US/kb/Back+and+forward+or+other+toolbar+items+are+missing<br />
    '''<u>Status Bar</u>''': click View, click Status Bar to place a check mark<br />
    '''<u>Full Screen Mode</u>''': If you have no Toolbars or Tab Bar: Press F11 (F11 is an on/off toggle). See: http://kb.mozillazine.org/Netbooks#Full_screen<br />
    Also see: http://kb.mozillazine.org/Toolbar_customization_-_Firefox#Restoring_missing_menu_or_other_toolbars
    <br />
    <br />
    '''Other items that need your attention'''
    The information submitted with your question indicates that you have out of date plugins with known security and stability issues that should be updated. To see the plugins submitted with your question, click "More system details..." to the right of your original question post. You can also see your plugins from the Firefox menu, Tools > Add-ons > Plugins.<br />
    <br />
    *Adobe PDF Plug-In For Firefox and Netscape
    **Current versions are 9.4.2 and 10.0.1 (aka Reader X)
    **More info about version 10 (aka Reader X)
    ***New Adobe Reader X (version 10) with Protected Mode was released 2010-11-19
    ***See: http://www.securityweek.com/adobe-releases-acrobat-reader-x-protected-mode
    #'''Check your plugin versions''': http://www.mozilla.com/en-US/plugincheck/
    #*'''Note: plugin check page does not have information on all plugin versions'''
    #'''Update Adobe Reader (PDF plugin):'''
    #*From within your existing Adobe Reader ('''<u>if you have it already installed</u>'''):
    #**Open the Adobe Reader program from your Programs list
    #**Click Help > Check for Updates
    #**Follow the prompts for updating
    #**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
    #*Download complete installer ('''if you do <u>NOT</u> have Adobe Reader installed'''):
    #**Use the links below to avoid getting the troublesome "getplus" Adobe Download Manager and other "extras" you may not want
    #**Use Firefox to download and SAVE the installer to your hard drive from the appropriate link below
    #**Click "Save to File"; save to your Desktop (so you can find it)
    #**After download completes, close Firefox
    #**Click the installer you just downloaded and allow the install to continue
    #***Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
    #**'''<u>Download link</u>''': ftp://ftp.adobe.com/pub/adobe/reader/
    #***Choose your OS
    #***Choose the latest #.x version (example 9.x, for version 9)
    #***Choose the highest number version listed
    #****NOTE: 10.x is the new Adobe Reader X (Windows and Mac only as of this posting)
    #***Choose your language
    #***Download the file, SAVE it to your hard drive, when complete, close Firefox, click on the installer you just downloaded and let it install.
    #***Windows: choose the .exe file; Mac: choose the .dmg file
    #*Using either of the links below will force you to install the "getPlus" Adobe Download Manager. Also be sure to uncheck the McAfee Scanner if you do not want the link forcibly installed on your desktop
    #**''<u>Also see Download link</u>''': http://get.adobe.com/reader/otherversions/
    #**Also see: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox (do not use the link on this page for downloading; you may get the troublesome "getplus" Adobe Download Manager (Adobe DLM) and other "extras")
    #*After the installation, start Firefox and check your version again.

  • Designer does not display logs

    The Designer (12.2.1.0) does not display logs when we use
        -s"jobname"
    instead of
        -G"guid"
    in parameter-text-files for exported-execution-commands (batch-files).
    The logfiles are created on disk.
    The management console finds the logfiles and displays them.
    The AL_HISTORY* tables and views know where the logfiles are.
    Has anyone experienced similar behaviour?
    Is there a cure?
    TIA
    Bernódus

    -s"jobname"  or  -s"JOBNAME"  or  -s"joBName"
    Case does not matter regarding display of logs.
    But console.job-name == al_history.sevice == value-of-parameter.
           it does not matter if name==lower(normname) or upper(name)==normname
    Designer location does not matter either. 
    We see no logs when activating Designer on the jobserver machine.
    And we see no logs when activating Designer on some developer machine.
    Edited by: Bernódus on Jul 22, 2011 4:26 PM

Maybe you are looking for