Desing requriment for processing the IDOC in real time

hi Gurus,
we have a requirement to design for processing the IDOC in real time i.e.all the IDOC must be store and process for give time line with out using BPPM tool.we have suggested to use cache storage or storing the files in file adapter.
please suggested good process with out compromising the Performance of PI.
regards
shankar

hi Raj,
Please find the example below for your reference
let say
System A-->PI--
>system B
system A sends multiple files based on time(daily or weekly) and real time( as an when the record created) to systerm B (CRM) in the form of IDOC Via. PI
we needs to club the real time files and send it to system B.How best we can do without using BPM.
regards
shankar

Similar Messages

Splitter program for processing the IDOCS with status 64.

Hello folks,
I have a requirement explained below. I am looking for a sample code which could help me to jump start with initial development.
Requirement:
Develop a splitter program which retrieves all the IDCOS with status 64, create and schedule batch jobs with 200 IDOCS each. The splitter program with be scheduled every 15 min.
Restrictions
Only 150 batch jobs can be created at a time.
Estimation
There may be around 36000 IDOCS with status 64 every hour.

Srinivas,
Here is the explaination why we require a splitter program.
Using RBDAPP01 parellel processing
Let us assume there are 4 servers A, B, C and D in a server group. If we select RBDAPP01 parellel processing there will be too many RFC calls to the servergroup.
(there are some more RFC calls later on for Order creation for example). As there is a restriction with number of RFC calls, we need to clear other RFC's before making new one. This is making complex and messy.
Using RDBAPP01 serial processing
For the volume of orders getting created each day, it takes a week to process those Idoca created in one day. Hence it is not a good solution.
Splitter program
We spawn 150 batch jobs with 200 records each. This way if we think it takes 20 min for each job to complete...by the end of 20th min we must had processed 30000 idocs.
Hence it is the solution offered.
Srinivas...still this confuses me..but if I am wrong anywhere please correct me.
But your initial response has helped me a lot. Everything was blank to me, ur reply made it clear over the requirement.
Thanks a lot,
Naren

Reg : change pointer mechanism for triggering the IDOC for delivery note

Hi ,
I am working on a change pointer mechanism for triggering the IDOC for delivery note and will be using this message class DESADV.
So SAP has suggested for assigning the message class DESADV with the function module in MASTERIDOC_CREATE_SMD_DESADV in BD60 transaction code.
So I was looking to create this MASTERIDOC_CREATE_SMD_DESADV function module in SAP and SAP suggesting that we should create this MASTERIDOC_CREATE_SMD_DESADV function module as same as the function module MASTERIDOC_CREATE_SMD_MATMAS.
So do anyone knows that is there any tool has been provided by SAP for creating this function module MASTERIDOC_CREATE_SMD_DESADV in SAP system for triggering the change pointer mechanism for outbound Delivery.
Thanks !
Regards,
Kiran

Hi,
When you are change pointer the system itself will take care of sending the changed master data to your partner system and the user will not have any intervention. If you really wanted to have that then you need to use the change pointers to read the master data which is modified in a custom program and then display that on the screen. Once the user selects that master data records then trigger an IDOC for creating the idoc for that master data and also flag that master data record as processed in the SAP BDCPS standard table, so that the same record will not be picked. If you wanted to know how the change pointers piece of code is written go through the program RBDMIDOC and you can understand how the change pointers logic is written.
Thanks,
Mahesh.

Process the Idoc

Hi All,
I am doing some process through an ABAP program when an idoc status will be in the status of 64. Once i complete the process i wants to post the Idoc from the waiting status 64 in the program.Is there any function module available to post an Idoc from the waiting status?
Could you please let me know how to post the Idoc successfully in the ABAP program?
Thanks & Regards,
Navaneeth

Its depands on the requirement, to process the Idoc for example you want to post the sales order
1 . Create a function module which reads input from the idoc and call some FM (bapi_salesorder_create) to create a sales order
2. Assign the function module to process code (WE42)
3. Assign the process code in the Partner profile
Include this message type and idoc type in the ale settings
than execute the tcode BD87 , the idoc will be posted
Regards
Sasi

Issue with the configuration of http xml port for sending the idoc

Hello,
      I am planning to send multiple idocs in a single file using http xml port.
Presently I am trying to send a single idoc, but am having the issue.
I am trying to create a RFC for HTTP XML port of type H i.e. HTTP Connection to ABAP System
In the how to guide for - How Tou2026 Send Multiple IDocs Within One XI Message
( https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/30ea2fdf-f047-2a10-d3a2-955a634bde6b )
the following parameters are defined for the path prefix -
RFC destination of type H (HTTP Connection to R/3 System).
Specify the path prefix as follows:
/sap/xi/adapter_plain/
?namespace=< your namespace>
&interface=<IDoc_Type>
&service=<Sender System>
&qos=EO (or EOIO).
I am trying to use the following prefix -
/sap/xi/adapter_plain/
?namespace=urn:sap-com:document:sap:idoc:messages ( this is the standard namespace of SAP for all the idocs)
&interface=DEBMAS05 (Idoc type )
&service=SNDLS100 ( ECC system name )
&qos=EOIO
On testing the RFC connection, I am getting the error of page not found.
Can anyone please give me pointers for the issue.
Regards,
Mayank

Thanks Barry!!!
Now I am getting a different message.
In RFC...it is giving me the following message ->
Status HTTP Response     204
Status Text     Body is empty
In case of Idoc, the status is till 02...
the error description for the idoc is --
"When transferring the IDoc by HTTP, the return code with the message '500<SAP:Error><SAP:Category>XIServer</SAP:Category><S' has occurred.
The target address was: http://emgeccsnd1:8001/sap/xi/adapter_plain/?namespace=urn:sap-com:document:sap:idoc:messages&interf
Check whether the IDoc can be sent again.
It is unfortunately not possible to determine automatically whether the IDoc has in fact arrived in the target system and the error occurred afterwards"
I am still not able to resolve the issue.
Regards,
Mayank

Planned cost for processing the component

Hi All,
How to see the planned cost for processing any component or finished product in SAP.
I don't want actual cost for processing the component.
Regards,
Shailendra

After releasing production order all primary and secondary costs get attached to the order.
You can see planned cost in Tcode:CO02>>>>Goto>>>>>>>Costs>>>Analysis>>>under cost trend layput.
Yogesh Thorat

When using flash player for games, the mac runs real slow

When using flash player for games, the mac runs real slow. It's also not the fastest at anything. Can I do anything to speed stuff up ?????

Have no clue. You provided no details and your system profile is blank.
Which os are you using?
How are you connected to the internet?
Have you contacted your isp to make sure the slowness is not coming from their end?
Max out your ram.
How large is your hard drive and how much hard drive space do you have left?
You you using the latest version of Adobe Flash?
Please describe in detail all you have attempted to do in order to resolve the issue.

How to create idoc in real time

hi guru
how to create idoc in real time
thanks
subhasis

Hi sahoo,
To Create Idoc we need to follow these steps:
Create Segment ( WE31)
Create Idoc Type ( WE30 )
Create Message Type ( WE81 )
Assign Idoc Type to Message Type ( WE82 )
Creating a SegmentGo to transaction code WE31Enter the name for your segment type and click on the Create iconType the short textEnter the variable names and data elementsSave it and go backGo to Edit -> Set ReleaseFollow steps to create more number of segments
Create IDOC TypeGo to transaction code WE30Enter the Object Name, select Basic type and click Create iconSelect the create new option and enter a description for your basic IDOC type and press enterSelect the IDOC Name and click Create iconThe system prompts us to enter a segment type and its attributes
Choose the appropriate values and press EnterThe system transfers the name of the segment type to the IDOC editor.Follow these steps to add more number of segments to Parent or as Parent-child relationSave it and go backGo to Edit -> Set release
Create Message TypeGo to transaction code WE81Change the details from Display mode to Change modeAfter selection, the system will give this message The table is cross-client (see Help for further info). Press EnterClick New Entries to create new Message TypeFill detailsSave it and go back
Assign Message Type to IDoc TypeGo to transaction code WE82Change the details from Display mode to Change modeAfter selection, the system will give this message The table is cross-client (see Help for further info). Press Enter.Click New Entries to create new Message Type.Fill detailsSave it and go back.
Reward points if helpful.
Thanks
Naveen khan

Requirements for Desktop PCs as LabVIEW Real-Time Targets

Hello
I have read the Requirements for Desktop PCs as LabVIEW Real-Time Targets
http://www.ni.com/white-paper/8239/en/
and i have 2 questions:
Supported Ethernet Chipsets: Is Intel® i210AT Controller supported?
Supported Processors: Is E3 and E5 Xeon Supported?
thank you

Dear goltnum9,
Here some Whitepapers where you can read which Requirements must be given and also how do convert.
Requirements for Desktop PCs as LabVIEW Real-Time Targets
How do I Create a Desktop Real-Time System?
Kind Regards,
SG3 | Applications Engineering | National Instruments | NIG |

How can I find the minimum in real time

I 'am doing some type of sensing mechanism. I that the data is step count versus intensity. So I want to record the minimum in real time from. Please kindly help

Hi perumpadapu,
you should have learned by now to provide some meaningful example (data)…
There are functions to detect minima: ArrayMinMax, "smaller than" comparison, PtByPtArrayMinMax, MinMax comparison, ...
It all depends on your data!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Background job is taking lot of time for processing the job.

One background job - which is processing Idocs is processing a job for more than 2000+ seconds.. and completed tho.
But this is happening for the past few days.. is there any way to trouble shoot, or find from any logs of this completed job, to find out why it was taking lot of time for processing.
Can you please tell me the steps of analyzing / trouble shooting why it was taking lot of time daily.
Regards,
Satish.

Hi Satish,
Run DB stat from db13 it will improve the performance.
Check number of idocs. You can send part by part, instead of sending huge data.
Check SM58 logs
Suman

Variables passed to Function module for posting the Idoc

Hi,
For Posting the Inbound Idoc a Function module is created what should be the values passed to
1) return_variable and
2) workflow_result.
I saw in many of the program like this if there is an error in posting.
I gave return_variable-wf_param = ' Error Idoc'.
and workflow_result = '99999'.
Why are these values passed, where are they used.

Josephine,
In your parntner profile for your customer/vendor ( depending on your idoc type and business scenario) , you would have assigned the post processing permitted agent.
In case the function module errors out, these values are carried out to the WF container and appropriate post processing notifications are sent to the agents. That is the purpose of having these variables in here.
It could be a success/failure, agents are notified in either case.
Ganesh

I looking for a transaction for debug the IDOCS

Hello friends,
I looking for a transaction that allowed me to debug the IDOC´s when the direction is only 1 (Outbound), for ex. for IDOC´s has direction 2 (Inbound) I used the WE19 transaction, and to choose the "Inbound Function Module" button and I take the "Call in debug mode" checkbox,
Can you tell me if exist another program for this?
Thanks in advance,
David

Hi,
IDocs are processed by a function module, which are mapped against in table EDIFCT. When you process an IDoc with BD87 you can have a breakpoint in the function and it will stop. For outbound processing it depends on which program is sending the IDoc. For transactional data like purchase orders, the IDoc is created via RSNAST00 which in turn calls a function module assigned to the processing code (BD41).
For your knowledge [reference1|Re: How to debug Idoc; [reference2|Outbound IDoc debug;.
May it helps you.
Regards,
DS.

How can i understand the Process Chain management in real time!!!

Hi,
now i am learning BW concepts. now i would like to know the real time scenarios regarding Process chains. can any body help me in this matter?.
thanks,
stikanth.ch

Hi,
A process chain is a defined sequence of interdependent processes required to perform acomplex task in an SAPBW environment. Data maintenance tasks in SAPBW are notrestricted to uploading data. Aggregate rollups, index maintenance, master data and ODS activation, and a variety of other jobs are required to update data, guarantee best-possible performance, and maintain data integrity. Typical SAPBW implementa-tions have complex interdependent networks of jobs in place that run every night, week,or month.Previous releases of SAPBW did not provide an integrated solution for scheduling and monitoring those kinds of job networks. This has changed with the introduction of process chains in release 3.0. Process chains allow you to define complex job networks consisting of standard SAPBW jobs, as well as custom jobs; they support visualizing the job network and centrally controlling and monitoring the processes.
(from "Mastering the SAP BIW")
New Features in BI 2004s Process Chains
/people/mallikarjuna.reddy7/blog/2007/02/08/new-features-in-bi-2004s-process-chains
Designing
/people/vishvesh.bahirat/blog/2006/11/29/bw-process-chain-design
Process chain creation in 2004s - step by step
/people/juergen.noe/blog/2008/01/11/process-chain-creation--step-by-step
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/events/sap-teched-03/using%20process%20chains%20in%20sap%20business%20information%20warehouse
http://help.sap.com/saphelp_erp2005/helpdata/en/87/13843b74f7be0fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
Process Chain Errors
/people/mona.kapur/blog/2008/01/14/process-chain-errors
Common Process chain errors
process chain issues or errors
Try Searching in SDN for this Topic and you will find much detailed info as this is discussed very frequently.
Hope this helps.
Thanks,
JituK

Issue with ALE configuration for creating the idoc for Purchase orders

Hello,
I am trying to send the purchase order through message type configuration using ALE.
I am using idoc ORDERS05, message ORDERS, Process Code in Partner profile ME10.
In NACE transaction for the Application EF, Output Type NEU the ALE Configuration is done for Program RSNASTED Form ALE_PROCESSING.
I have done ALE distribution using BD64.
Now the problem is that when an order is created or changed in the message output of the PO I am seeing the status as yellow i.e.not processed.
In NAST table, the entry is there but on executing RSNAST00 nothing happens.
Please provide me the pointers to solve the given problem.
Regards,
Mayank

Hi,
Guess it looks like the output is getting proposed but its not getting processed. Check the output type configuration. Check the TIme Settings in the output type configuration.
It is possible to set the Time when the output must be processed. Is it on SAVE or is it set to other settings. If its set to via background job then the background job must be run to process the output types.
Check and let me know if all is fine at the output type configuration.
Cheers
VJ

Desing requriment for processing the IDOC in real time

Similar Messages

Maybe you are looking for