Details about FND

Hi all,
Can you please provide me some links from where I can get details about fnd.
I'm new to oracle application framework.I need to know the ideas behind the fnd tables.Specially FND_RESPONSIBILITY and the menus.
Thanks in advance,
KP...

I'm interested in finding more about the "FND" too and I don't think the developer guide provides much insight. There must be some documentation that lists the contents of FND and provides some examples on how to us it, is anyone aware of any other sources?

Similar Messages

  • Need details about messageName

    I am using the following code to display a confirm message, once a new record inserted. This a program from the Tool Box tutorial.
    MessageToken[] tokens = { new MessageToken("EMP_NAME", employeeName),
    new MessageToken("EMP_NUMBER", employeeNum) };
    OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM", tokens,
    OAException.CONFIRMATION, null);
    pageContext.putDialogMessage(confirmMessage);
    This is working fine. But I could not understand what are these values "AK" and "FWK_TBX_T_EMP_CREATE_CONFIRM". Do we need to configure these any where in the code?
    Please give me the details about this?

    Please see
    <JDEV_CLIENT_INSTALL_DIR>/jdevdoc/javadoc/fwk/oracle/apps/fnd/framework/OAException.html#OAException(java.lang.String, java.lang.String, oracle.apps.fnd.common.MessageToken[], byte, java.lang.Exception[])
    The arguments are "Application Short Name", "Message Name".
    You would need to define the message in FND Message Dictionary.

  • I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have manged to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the pr

    I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text  or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?

    The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
    David

  • Is there a way to find out details about, who approved the RMA on system using front end or back end?

    Is there a way to find out details about, who approved the RMA on system using front end or back end?

    But is there a way (simple or not-so-simple) to find
    out EVERY SINGLE FILE that's referenced on a
    timeline? (I have lots of stuff imported into the
    project that I know isn't used on any timeline, but
    I'm afraid of moving or deleting things for fear of
    never finding it again.)
    I'd love to get some sort of "printout" (a list or
    something) of every single file.
    There is, go to browser and cntrl click on any one of the columns,
    and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
    Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
    If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
    From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
    Hope this helps and that I've read you properly,
    Peace
    P-Book 1.5, 17" 2gsRAM   Mac OS X (10.4.4)   FCStudio

  • Know more detail about the Remote Support Platform for SAP Business One ?

    SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
    Enhancements planned in Remote Support Platform for SAP Business One 9.1
    RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
    RSP Processes and Reports adapted to SAP HANA Database
    With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
    But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
    What is Remote Support Platform for SAP Business One?
    The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
    The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
    Some Key Features of Remote Support Platform:
    Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
    Incident Reports against the issues identified which require attention of SAP Support
    Company Database Backup and Restore options
    Regular fixes of Company Database inconsistencies
    Check, Download and Install regular updates in SAP Business One
    Upload Logs and required files to SAP Support or to Partner Support on regular basis
    Some details about RSP Backup Management
    Schedule daily, weekly, and monthly backups
    Perform differential and full database backups
    Back up transaction logs
    Back up files to shared folders on a network
    System Status Report through RSP
    From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
    Database uploads only via RSP
    From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
    Microsoft Windows PowerShell Scripting
    In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
    To achieve the internet connection test, you must allow port 80 for the RSP external communication
    Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
    Set the correct proxy
    Disabling Windows firewall in the TP_link Wireless Configuration Utility
    Want to now More about It Click Here :   Remote Support Platform for SAP Business One

    SAP Business One 9.1 is about to release this year and we can see in the feature enhancements that a significant update is planned in the Remote Support Platform for SAP Business One, more commonly known as RSP. Let’s have a quick look what update is planned for RSP in version 9.1:
    Enhancements planned in Remote Support Platform for SAP Business One 9.1
    RSP is planned to support both SAP Business One on Microsoft SQL Server as well as SAP Business One on HANA Database
    RSP Processes and Reports adapted to SAP HANA Database
    With this plan RSP will help in the areas of Download, Installation, Go-Live Check, Monitoring, Upgrade and Support for SAP Business One both   on SQL Server and HANA.
    But like me (non-SAP B1 Consultant) many of you have the question what is RSP and how it helps in support? Here I have tried to gather all information.
    What is Remote Support Platform for SAP Business One?
    The remote support platform for SAP Business One is designed to protect a SAP Business One installation by providing automated and remote support in a high-volume business.
    The platform monitors the entire SAP Business One environment. By significantly reducing the time between the appearance, identification, and resolution of issues, the remote support platform for SAP Business One minimizes the impact on customer databases and processes.
    Some Key Features of Remote Support Platform:
    Showing alerts to SAP B1 Admin about the events which require their attention, such as low disk space, database backups, etc.
    Incident Reports against the issues identified which require attention of SAP Support
    Company Database Backup and Restore options
    Regular fixes of Company Database inconsistencies
    Check, Download and Install regular updates in SAP Business One
    Upload Logs and required files to SAP Support or to Partner Support on regular basis
    Some details about RSP Backup Management
    Schedule daily, weekly, and monthly backups
    Perform differential and full database backups
    Back up transaction logs
    Back up files to shared folders on a network
    System Status Report through RSP
    From June 1st 2013, it will be mandatory to install, configure and upload the System Status Report (SSR) from Remote Support Platform (RSP) for SAP Business One in order to receive support for messages of a technical nature (upgrades, performance & crashes, etc).
    Database uploads only via RSP
    From June 1st 2013 SAP Business One Support will only accept database uploads to SAP via remote support platform for SAP Business One. In certain exceptional circumstances STFP may be used but this will constitute a minority of cases.
    Microsoft Windows PowerShell Scripting
    In the remote support platform studio, you can create tasks using Microsoft Windows PowerShell scripting. PowerShell enables you to perform remote administrative tasks on customers’ Microsoft Windows operating systems, by providing full access to Component Object Model (COM) and Windows Management Instrumentation (WMI).Some Network Prerequisite for RSP
    To achieve the internet connection test, you must allow port 80 for the RSP external communication
    Disabling antivirus firewall or add the RSP to the trusted zone of the antivirus
    Set the correct proxy
    Disabling Windows firewall in the TP_link Wireless Configuration Utility
    Want to now More about It Click Here :   Remote Support Platform for SAP Business One

  • Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to

    Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!

    Did this ever get resolved, as I am having the same issue.  Trying to learn LR5 AFTER a decade using Aperture.   I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message.   Using latest version of Mac OS X.

  • How to get details about Exception catched in Exception branch of the Block

    Hello Experts,
    Is it possible to get details about Exception catched in Exception branch of the Block in Integration Process (BPM)?
    In the Exception branch System Error is catched, but from time to time different type of System Errors are happening during sync call to WebService - Connection Timeout, Connection Refused, UnknownHost, etc.
    So the task is somehow to map the type of System Error to the response. I was trying to create a mapping using as source the message which is coming from the Adapter after the sync call, but the mapping is failing with "No Source Payload" error.
    Maybe the description is somewhere in Header or Dynamic configuration?
    Or it is possible to access it somehow with JAVA-maping?
    Thanks for your help!

    Hey,
          the message from the exception can be utilized by using alerts(in order to mail,sms r fax). but otherwise its not possible using mappings or container.
    check this link for alert configuration.
    /people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step

  • How to register a new responsibility in apps through backend. please give me the full details about it

    how to register a new responsibility in apps through backend. please give me the full details about it

    Hi,
    From backend you can add a responsibility to a user using FND_USER_PKG package, and there are so many hit in the google. Let me point out 1:
    http://manoharbabuapps.blogspot.com/2013/08/how-to-add-responsibility-from-back-end.html
    I personally dont know of any API where you can create a responsibility from backend, but from front end you can create. Steps detailed in following link:
    Oracle Applications: creating responsibility in oracle apps R12
    Thanks &
    Best Regards,
    Asif

  • Is there any possibility to see full details about the event?

    ipad calendar:I have no chance to read the event location fully on my ipad. It is cut and finishes with "...", thus very important meeting  number cannot be seen. Is there any possibility to see full details about the event?

    Thanks for quick reply.
    Looks like opened the event. Here is a screen shot, I marked the cut numbers with red cirsles.

  • How to get details about disabled ID?

    I've had a Verizon iPhone since late April 2011 (it's now June 8, 2011). Twice I've had the "disabled ID for security reasons" thing, and I can't figure out why. I'm the only human in the house. Unless the cat or his fleas have been trying to log in, it hasn't been me...
    I got the message tonight, for instance. No trouble re-activating, but how do I get more details about what actually happened between last night and tonight, since I didn't get the message last night? I know that I haven't tried to manually log in for weeks. Is it a glitch that sometimes happens when downloading stuff automatically from the iTunes store? Or is some hacker actually trying to guess my password? 
    I frequently do start up iTunes (Snow Leopard 10.6.7) to download freebies. The only odd thing I remember in the past few days was when something labeled free triggered something that would have purchased it for real money if I clicked on a yes button. Other than that, the downloads have all just proceeded without fuss. The last phone system update was quite a while ago, although I did update some apps a few days ago.
    I think I noticed the App Store was in the active list on my phone within the past few days, even though I didn't deliberately click on it. Also the phone app has started dialing (I think) when I didn't even start it up intentionally a couple of times. Is that what is happening with my id? Did the App Store think I was logging in for some reason? I would think a purchase would need to be started first, though, and I never have seen anything suggesting that's happened. And I don't think that actually happened between last night (no problem) and tonight (disabled).
    So is there any place to actually check for activity, so I can figure this out?

    jwoolman wrote:
    Or is some hacker actually trying to guess my password?
    a reasonable assumption.
    in any case, see these support articles:
    Apple ID: "This Apple ID has been disabled for security reasons" alert appears
    Frequently Asked Questions About Apple ID

  • Oracle Payables report showing details about Suppliers and balance

    Hello,
    I am working in Oracle 11i environment.
    I am looking for a report that shows the details about Suppliers, their Invoices and the balances that exist for those suppliers. And the total invoice amount.
    Which report should I run in the Oracle Applications.
    Thank you

    Hello Octopus,
    Yes, I have run the Trial Balance report. but it is just showing the Liability account, Invoice AMount and the remaining amount columns only. I dont have any other details on the report.
    The details of the reports are something like this.
    Liability Account Invoice Amount Remaining Amount
    01-000-2210-0000-000 9,xxx,xxx.xx 9,xxx,xxx.xx
    ================== ==================
    Total for Report : 9,xxx,xxx.98 9,xxx,xxx.xx

  • Problem to know details about check deposit lists for a customer(FF68)

    Hi Gurus,
    I have Requirement ,On Posting Date
    Bank details about a customer to know check
    deposit lists,All the cheque postings that are dated
    for today and tomorrow are to be extracted from
    back end.RFC developed should be capable of  
    accepting date range.  Useful fields for the
    SMS are  Slip No, Posting date, value date,
    entry date, Party code, Ref No, Amount,
    Cheque No, Cheque date, Bankers Name
    Could anyone help me,
    how do know Bank Details for a customer check deposit lists

    Hi Shiva,
    We also have a requirement to capture all the fields mentioned below during customer incoming payments.
    We also have some additional fields like state code and check deposit location code also.
    Would be really helpful if i could know how you have mapped the same in FF68.
    Thanks
    Sembian

  • From which infotype we get details about empoyee group ,subgroup company co

    From which infotype we get details about empoyee group ,subgroup company code.  based on the selected job position for new employee.

    Hi Aruna,
    If i can understand your question better, when we do the hiring how to fetch the default EG/ESG/Co.Code/PSA etc....based on the input of position...
    When you create position in OM; also create
    1. Infotype 1008 - Account assignment - To Fetch Co. Code, PA, PSA, Controlling area
    2. Inotype 1013 - EG/ESG - To Fetch Emp Group/Emp SubGroup
    Now when you run the hiring action, on IT0000, input the position and hit an enter key...this will call the related values (if integration is active).
    Good Luck !!!!
    Kumarpal Jain.

  • Could you pls give the details about the Unicode conversion during Upgrade

    Hi,
    Can anyone give details about the Unicode conversion during SAP Upgradation fro 4.6C to ECC6.
    Waiting for quick response
    Best Regards,
    Padhy

    Hi,
    These are the few points i gathered during my upgradation project.
    Before starting any upgradation project, it is necessary to take up the back-up of the existing systems. As we are going to upgrade the entire system, we will be changing so many things and if something happens, without back-up, we will be in a trouble.
    So it is advised to keep a back-up of the existing system.
    Say for example we have the existing system E4B which is of Version 4.6C. Now we want to upgrade it to Version 4.7. Let us see how we can do it.
    Version upgrades not only means that we need to run the new Version CD over the existing Version System but only involves some other thing.
    Version Upgrade involves the following Steps.
    Say we want to upgrade for Version 4.7 from Version 4.6, which is in the System E4B. Now we created one more system called as E1B in which the upgradation for Version 4.7 can be done.
    • First copy the entire E4B system into the E1B System which is created for Version 4.7.
    • Apply the Version 4.7 CD provided by SAP over the E1B System.
    • Now check whether all the functionalities that was in E4B system works fine with E1B system also.
    Thus the Version Upgrade involves two steps.
    1. SAP Upgradation with the help of the CD
    2. Manual Upgradation.
    1. SAP Upgradation with the help of the CD
    This is nothing but after taking the copy of the existing system into a new system, the upgradation CD from SAP is applied over the new system.
    2. Manual Upgradation.
    This Manual Upgradation involves
    2.1 Upgradation of Standard Objects
    2.1.1 SPAU Objects
    2.1.2 SPDD Objects
    2.2 Upgradation of Custom Objects.
    Upgradation of Custom Objects can be placed under the following three categories.
    Unicode Compliance
    Retrofit
    Upgrade
    Please Find below some of the common Unicode Errors and their solutions
    1. Error:
    In case of Translate Error; ‘Dangerous use of Translate in Multilingual system.’
    Correction:
    To correct the Error occurring on TRANSLATE statement – use this additional statement before the Translate statement.
    SET LOCALE LANGUAGE sy-langu.
    This statement defines the Text Environment of all the programs & internal sessions in the language specified in the LANGUAGE KEY, which in this case is “sy-langu”, i.e. the log on language of the user.
    2. Error:
    In case of Open Dataset Error; ‘Encoding Addition must be included.’
    Correction:
    This Error occurs only when the MODE is TEXT.
    To correct the Error occurring on OPEN DATASET statement – use this statement instead.
    OPEN DATASET dataset_name FOR access IN TEXT MODE ENCODING DEFAULT.
    Where: dataset_name – NAME OF THE DATASET.
    Access – INPUT or OUTPUT or APPENDING or UPDATE.
    DEFAULT - Corresponds to UTF-8 in UNICODE systems &
    NON_UNICODE in NON-UNICODE systems.
    3. Error:
    In case of the usage of the Obsolete FM UPLOAD/DOWNLOAD or WS_UPLOAD/DOWNLOAD; ‘Function module UPLOAD is flagged as obsolete.’
    Correction:
    The FM GUI_DOWNLOAD/UPLOAD is used.
    The variations to be made in the parameters of the FM:
    1. Filename – It must be of STRING type.
    2. Filetype – “DAT” is not used any longer, instead “ASC” is used.
    3. Field Separator – The default value “SPACE” is used, incase for a TAB separated file “X” can be used.
    4. Error:
    In case of CURRENCY/UNIT Addition Error; ‘Use addition CURRENCY/UNIT when outputting.’
    Correction:
    The CURRENCY addition specifies the currency-dependant decimal places for the output of the data objects of type i or p. To obtain the currency-key, the field CURRKEY of the table TCURX is used. The system determines the number of the decimal places from the field CURRDEC of the selected CURRKEY.
    To correct this error follow the following method:
    WRITE: /3 'TOTAL',' ', TOTAL.
    WRITE: /3 ‘TOTAL’,’ ‘, TOTAL CURRENCY ‘2’. --- Where ‘2’is the Currency Key for Getting 2 decimal places.
    5. Error:
    In case of TYPE X Error; ‘Variable must be of C, N, D, T or STRING type.’
    Correction:
    We need to change all the Type X (Hexadecimal) variables to Type C with their values unchanged.
    So the method to be followed is:-
    1. Load the definition of the class CL_ABAP_CONV_IN_CE or CL_ABAP_CHAR_UTILITIES.
    2. Declare the variable as Type C, and use the method UCCP(‘XXXX’) of the class CL_ABAP_CONV_IN_CE where XXXX represents the 8-bit Hexadecimal value and incase the variable holds a Hex value for a Horizontal Tab , then the Attribute “HORIZONTAL_TAB” of the class CL_ABAP_CHAR_UTILITIES can be used directly instead of using the method UCCP.
    E.g.:
    i) *DATA: TAB TYPE X VALUE 09, “Tab character
    CLASS: CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
    DATA TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
    ii) * DATA: CHAR TYPE X VALUE 160.
    CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
    DATA CHAR TYPE C.
    CHAR = CL_ABAP_CONV_IN_CE=>UCCP(‘00AO’).
    (Here ‘00A0’ is the Hexadecimal equivalent of the decimal 160).
    3. Incase the TYPE X Variable has a length more than 1, then an internal table must be created for the variable.
    E.g.:
    CLASS: CL_ABAP_CONV_IN_CE DEFINITION LOAD.
    DATA : LF(2) TYPE X VALUE 'F5CD'.
    DATA : BEGIN OF LF,
    A1 TYPE C,
    A2 TYPE C,
    END OF LF.
    LF-A1 = CL_ABAP_CONV_IN_CE=>UCCP('00F5').
    LF-A2 = CL_ABAP_CONV_IN_CE=>UCCP('00CD').
    6. Error:
    In case of the Character “-“Error; ‘The Character “-“can’t appear in names in Unicode Programs.’
    Correction:
    The Character “-“(Hyphen) appearing in Variable names is replaced by the character “_” (Under Score) for Unicode/Upgrade Compliance.
    E.g.:
    *wk-belnr LIKE bkpf-belnr,
    *wk-xblnr LIKE bkpf-xblnr,
    *wk-date LIKE sy-datum,
    *wk-wrbtr LIKE bseg-wrbtr,
    *wk-name1 LIKE lfa1-name1,
    *wk-voucher(8) TYPE c.
    wk_belnr LIKE bkpf-belnr,
    wk_xblnr LIKE bkpf-xblnr,
    wk_date LIKE sy-datum,
    wk_wrbtr LIKE bseg-wrbtr,
    wk_name1 LIKE lfa1-name1,
    wk_voucher(8) TYPE c.
    7. Error:
    In case of The SUBMIT-TO-SAP-SPOOL Error; ‘you should not use the statement SUBMIT-TO-SAP-SPOOL without the WITHOUT SPOOL DYNPRO addition. ‘
    Correction:
    1. Declare variables of type PRI_PARAMS, ARC_PARAMS, and a variable of TYPE C which would be used as a VALID FLAG.
    2. Call the FM GET_PRINT_PARAMETERS:
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    ARCHIVE_MODE = '3'
    DESTINATION = P_DEST
    IMMEDIATELY = 'X'
    IMPORTING
    OUT_ARCHIVE_PARAMETERS = archive_parameters
    OUT_PARAMETERS = print_parameters
    VALID = valid_flag
    EXCEPTIONS
    INVALID_PRINT_PARAMS = 2
    OTHERS = 4
    3. Use the SUBMIT-TO-SAP-SPOOL statement.
    E.g.:
    •     submit zrppt500
    •     using selection-set 'AUTO3'
    •     with res_no eq lo_rsnum
    •     with sreserv in preserv
    •     to sap-spool destination p_dest
    •     immediately 'X'. "print immediate
    DATA: print_parameters type pri_params,
    archive_parameters type arc_params,
    valid_flag(1) type c.
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
    EXPORTING
    ARCHIVE_MODE = '3'
    DESTINATION = P_DEST
    IMMEDIATELY = 'X'
    IMPORTING
    OUT_ARCHIVE_PARAMETERS = archive_parameters
    OUT_PARAMETERS = print_parameters
    VALID = valid_flag
    EXCEPTIONS
    INVALID_PRINT_PARAMS = 2
    OTHERS = 4
    Submit zrppt500
    Using selection-set 'AUTO3'
    With res_no eq lo_rsnum
    with sreserv in preserv
    to sap-spool
    SPOOL PARAMETERS PRINT_PARAMETERS
    ARCHIVE PARAMETERS ARCHIVE_PARAMETERS
    WITHOUT SPOOL DYNPRO.
    8. Error:
    In case of Message Error; ‘Number of WITH fields and number of Place Holders are not same ‘.
    Correction:
    Split the statement after WITH into the same number as the place holder for that Message ID.
    E.g.:
    1. * MESSAGE E045.
    MESSAGE E045 WITH '' ''.
    2. in program ZIPI0801
    •     Start of change for ECC6
    •     message e398(00) with 'Could not find access sequence'
    •     'for condition type:'
    •     p_ptype.
    message e398(00) with 'Could not find '
    'access sequence'
    'for condition type:'
    p_ptype.
    •     End of change made for ECC6
    9. Error:
    In case of Move between 2 different Structures; ‘The structures are not mutually convertible in a Unicode program.’
    Correction:
    Make both the Data Types compatible and then assign the contents.
    E.g.:
    The statement –“move retainage_text to temp_text.” Gives an error, where RETAINAGE_TEXT is an internal table and TEMP_TEXT is a string of length 200.
    A Feasible solution for this is to specify from which position to which position of the string, the fields of RETAINAGE_TEXT should be assigned.
    TEMP_TEXT+0(1) = RETAINAGE_TEXT-DQ1.
    TEMP_TEXT+1(1) = RETAINAGE_TEXT-HEX.
    TEMP_TEXT+2(20) = RETAINAGE_TEXT-FILLER1.
    TEMP_TEXT+22(15) = RETAINAGE_TEXT-AMT_DUE.
    TEMP_TEXT+37(8) = RETAINAGE_TEXT-TEXT.
    TEMP_TEXT+45(10) = RETAINAGE_TEXT-DUE_DATE.
    TEMP_TEXT+55(1) = RETAINAGE_TEXT-DQ2.
    10. Error:
    In case of ‘no description found’; ‘add a GUI title’.
    Correction:
    In this type of error gui title is generally missing so add a GUI title to the module pool.
    11. Error:
    In case of ‘writing internal or transparent table’
    Correction:
    Write individual fields.
    E.g.:
    WRITE: / EXT. --> EXT should be a character type field
    WRITE: / EXT-ZZSTATE, EXT-LINE_NO, EXT-LINE_TXT, EXT-AMT, EXT-ZZSKUQTY.
    12. Error:
    In case of ‘combination reference table/field S541-UMMENGE does not exist’
    Correction:
    Was due to error in reference table S541. TABLE S541 has errors
    1)”Foreign key S541- ZZMARKET (ZZMARKET AND KATR2 point to different domains)”
    2)”Foreign key S541-ZZACQUIGRP (ZZACQUIGRP AND KATR8 point to different domains)”
    Changed the domain of ZZMARKET (from ZMKCODE to ATTR2)
    And that of ZMKCODE (from ZACCODE to ATTR8)
    13. Error:
    In case of ‘KEY does not exist’
    Correction:
    The reference table for field KBETR was KNOV earlier changed it to RV61A as KNOV was in turn referring to RV61A.
    14. Error:
    Incase of ‘WRITE’ statement, ‘Literals that take more than one line is not permitted in Unicode systems.’
    Correction: To correct this error, we need to align the spaces accordingly so that the statement doesn’t go beyond the line.
    15. Error:
    Incase of Data statement, ‘The data type ZWFHTML can be enhanced in any way. After a structure enhancement, this assignment or parameter might be syntactically incorrect………..’
    Correction: To correct this error, instead of “like” in the Data statement, use “type”.
    16. Error:
    Incase of DESCRIBE statement, ‘DESCRIBE can be used only with IN BYTE... Or IN CHARACTER mode in Unicode systems.’
    Correction: To correct this error, use additional text, IN BYTE MODE / IN CHARACTER MODE along with this statement.
    CHARACTER MODE is added when the data object is of flat/ character type.
    BYTE MODE is added when the data object is a deep structure.
    Syntax: DESCRIBE FIELD data_obj : LENGTH blen IN BYTE MODE,
    LENGTH clen IN CHARACTER MODE.
    Where blen and clen must be of type I.
    17. Error:
    Incase of DO-LOOP Error,’ In Do loop range addition needed‘
    Correction:
    An internal tables is declared and the two fields (VARYING field and NEXT field) were
    Included inside the internal table
    E.g.: In program SAPMZP02
    DO 11 TIMES
    •     VARYING STATION_STATE FROM STATION1 NEXT STATION2. “ECC6
    CASE SYST-INDEX.
    WHEN ‘1’
    STATION_STATE = STATION1.
    WHEN ‘2’
    STATION_STATE = STATION2.
    WHEN ‘3’
    STATION_STATE = STATION3.
    WHEN ‘4’
    STATION_STATE = STATION4.
    WHEN ‘5’
    STATION_STATE = STATION5.
    WHEN ‘6’
    STATION_STATE = STATION6.
    WHEN ‘7’
    STATION_STATE = STATION7.
    WHEN ‘8’
    STATION_STATE = STATION8.
    WHEN ‘9’
    STATION_STATE = STATION9.
    WHEN ‘10’
    STATION_STATE = STATION10.
    WHEN ‘11’
    STATION_STATE = STATION11.
    18. Error:
    Incase of the parameter QUEUE-ID Error,’ QUEUE-ID’ is neither a parameter nor a select option in program rsbdcbtc.’
    Correction:
    The parameter in program rsbdcbtc is QUEUE_ID and so is changed in this program
    E.g.: In program Z_CARRIER_EDI_INTERFACE
    •     submit rsbdcbtc with queue-id = apqi-qid and return. "ECC6
    •     The parameter name changed by replacing '-' with '_' as in program rsbdcbtc "ECC6
    Submit rsbdcbtc with queue_id = apqi-qid and return. "ECC6
    19. Error:
    Incase of EPC Error,’ Field symbol <TOT_FLD> is not assigned to a field ‘.
    Correction:
    This error couldn't be rectified as the error occurs in a Standard SAP include- LSVIMF29.
    The OS Note - 1036943 needs to be applied.
    Error:
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE.
    Correct:
    OPEN DATASET P_FILE FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
    Error:
    Constants : c_tab type x value '09' .
    Correct:
    Constants : c_tab type abap_char1 value cl_abap_char_utilities=>horizontal_tab .
    Error:
    Data : begin of output_options occurs 0 . Include structure ssfcompop.
    Data : end of output_options .
    Correct:
    Data : output_options type standard table of ssfcompop with header line .
    Error:
    PARAMETERS : NAST TYPE NAST .
    Correct:
    PARAMETERS : NAST TYPE NAST NO-DISPLAY .
    Replace WS_DOWNLOAD and WS_UPLOAD by
    GUI_UPLOAD and GUI_DOWNLOAD and check the import and export parameter types , do the changes accordingly. Because FILENAME paramater type is different because of this it will give dump.
    For issue during Issue using SO_NEW_DOCUMENT_ATT_SEND_API1 Function module, the solution is After this FM we should put COMMIT WORK.
    Issue:
    Moving data from one structure to another structure if those two structures are not compatible
    Solution:
    we should use move-corresponding or field by filed we need to move it.
    If database structures are different in 4.6c and ECC6.0,
    Then we should go with append structure concept.
    While testing the report if it gives dump at Select query level or any database or view level,then just goto that table or view and goto the data base utility(se14) adjust the database. But make sure that selected radio button in se14 transaction should be activate and adjust database
    Also Check this link.
    http://help.sap.com/saphelp_nw04/helpdata/en/62/3f2cadb35311d5993800508b6b8b11/frameset.htm
    Reward points if helpful.
    Regards,
    Ramya

  • Want to know more details about control breaks in reports

    hello all
    i want to know more details about control breaks AT First,
                                                                          AT Last,
                                                                          AT New,
                                                                          At End of and on change .
    can anybody tell with examples?

    Hi Swamy,
       Check the following.
    Control break statements are used to create statement blocks which process only specific table lines the LOOP – ENDLOOP block.
    You open such a statement block with the control level statement AT and close it with the control level statement ENDAT. The syntax is as follows:
    Table should be sorted when you use control-break statements
    You can break the sequential access of internal tables by using these statements.
    Syntax:
    At first.
    <Statement block>
    Endat.
    This is the first statement to get executed inside the loop (remember control break statements are applicable only inside the loop)
    So in this block you can write or process those statements which you want to get executed when the loop starts.
    At New carrid.
    Write:/ carrid.
    Endat.
    In this case whenever the new carrid is reached, carrid will be written.
    At End of carrid.
    Uline.
    Endat.
    In this case whenever the end of carrid is reached, a line will be drawn.
    At Last.
    Write:/ ‘Last Record is reached’.
    Endat.
    Processing of statements within this block is done when entire processing of entire internal table is over. Usually used to display grand totals.
    You can use either all or one of the above control break statements with in the loop for processing internal table.
    At end of carrid.
    Sum.
    Endat.
    In above case the statement SUM (applicable only within AT-ENDAT) will sum up all the numeric fields in internal table and result is stored in same internal table variable.
    Hope this helps you.
    Any queries, get back to me.
    Regards,
    Chandra Sekhar

Maybe you are looking for