Details about ModuleData and ModuleContext
Hi All,
I need more deatils about the Module Programming parameters <b>"ModuleData", "ModuleContext" and "XMLPayload"</b> like the members of these classes and their functionalities etc.
Looking for your replies.
Thanks in advance.
Rgds,
Joe.
Try here:
http://help.sap.com/saphelp_nw04/helpdata/en/32/43d84072378031e10000000a1550b0/frameset.htm
Similar Messages
-
Oracle Payables report showing details about Suppliers and balance
Hello,
I am working in Oracle 11i environment.
I am looking for a report that shows the details about Suppliers, their Invoices and the balances that exist for those suppliers. And the total invoice amount.
Which report should I run in the Oracle Applications.
Thank youHello Octopus,
Yes, I have run the Trial Balance report. but it is just showing the Liability account, Invoice AMount and the remaining amount columns only. I dont have any other details on the report.
The details of the reports are something like this.
Liability Account Invoice Amount Remaining Amount
01-000-2210-0000-000 9,xxx,xxx.xx 9,xxx,xxx.xx
================== ==================
Total for Report : 9,xxx,xxx.98 9,xxx,xxx.xx -
Details about BayerGreenSplit and its value
Does anyone know anything more than the few lines written in the DNG documentation about this tag, BayerGreenSplit?
How is the green pixels divergence measured? How can one decide what BayerGreenSplit value corresponds to his/her camera?
The 0 - 5000 range looks quite strange. Maybe the phenomena described has also another name?
Any help is appreciated.
Thank you.OK, I exhaled. ;)
Used to think the weird clay texture ACR rendered high frequency detail like blades of grass and foliage in the distance in my Pentax PEF's was something undesirable. But after comparing ACR's ease of use, quality and speed of its editing tools and simpler interface compared to other raw converters, the odd texturing is tolerable.
And besides that it can only be seen at 200% zoomed view anyway and can't be seen even on 20x30in. print enlargements. This texture also produces some very clean results when applying aggressive sharpening as well, so I'm thinking whatever algorithm Adobe's engineers are using to produce such a texture must be intentional.
I'm just fascinated by all the variations achieved just with demosaicing algorithms. -
Need the Details About ABAB and Netviewer.
Hi All,
One of my friend is working in JAVA.. And he want study ABAB and Netviewer.
Please provide any websites or books to study
MPHi,
Please check these links
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/41341147041806e10000000a1553f6/frameset.htm
and also refer
https://www.sdn.sap.com/irj/sdn/netweaver
http://service.sap.com/netweaver
https://www.sdn.sap.com/irj/sdn/nw-elearning
http://searchSAP.com/r/0,,41186,00.htm
Reward points if useful.
Regards,
Srujana. -
i want to know in detail about IPS and its working.Also is it using artificial intelligent or neural network for self upgrading reason.
No, the sensors are not intelligent. They will very happily sit there dumb until updated manually.
-
About lm02 and lm05 transactions
Hi,
Ineed information about lm02 and lm05 transactions
RegardsLM02 RLMOB001 Select by SU -Put Away
LM05 RLMOB001 Picking by TO ID
The Mobile Data entry customising facilitates the interface between Radio Frequency devices and SAP.
SAP Console is used as a translator between the device and SAP, this takes the series of GUI designed
screens (all transactions starting with "LM") and converts them into a text format that is readable on the text terminals.
Padma Pls check the Following Links you can get more details about LM02 and Lm05,
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/fe5af4e9-0d01-0010-6784-97811700d635
http://www.sap-hefte.de/download/dateien/1370/126_leseprobe.pdf
Kanagaraja L -
Explain in detail about Info Set including joins, inner joins etc.
Hello SAP BW Experts,
Can any one explain in detail about Infoset and also how to create queries on Infoset.
Thanks & Regards
Venkata Agraharam.Hi Venkat,
Please go through the following :
What is Infoset ?
[http://help.sap.com/saphelp_bw33/helpdata/en/ed/084e3ce0f9fe3fe10000000a114084/content.htm]
Creating Queries on Infoset
[How to create infoset query;
Hope it helps.
Regards
Hemant Khemani -
I have just started to use Muse for our design agency and learning how to build ourselves a new site, I have managed to create a basic lightbox which contains sliding images, what I need to do now is have a pop up window which goes into detail about the projects, what I would like is a piece of text or icon that when you roll over it and then click a separate window pops up with additional information in, once finished reading the info you can then click to close the box, any advice on how to do this?
The best way to do what you're asking is with the Composition widget. Start with the Tooltip preset, which, by default shows the info on rollover. You can change the option to show on click, which is what you're after. You can also add the close button or have the info disappear on rollout.
David -
Help! I have recently updated LR5 and before doing so I was able to email files to clients! (Very Convenient) Now my problem is I have not been able to get pass this error message reading "failed to send" which gives no further detail about what to do to rectify the situation. Someone please guide me through this! Thanks in advance!
Did this ever get resolved, as I am having the same issue. Trying to learn LR5 AFTER a decade using Aperture. I was able to set up a validated account but when I try to send an e-mail or photo I get the simple " Failed to Send " message. Using latest version of Mac OS X.
-
Details about TA kk01 and master tables
hi SAP Technical Guru's
pls provide details about TA KK01 (statistical key figures) and master tables.
best regards,
m.srinivas.Hi
TA Report * Header Description*
KKO1 SAPMKCEE Create Drilldown Report
Go to SE 38 and check this report, you can also find the master data tables used by clicking f1 and then the technical settings button on the tool bar.
Regards
Divya -
Details about WF-BATCH and DDIC users
hi
please provide me the details about the users WF-BATCH and DDIC .hi kamaraj
check these links
Re: _WF_INITIATOR and WF_BATCH
http://help.sap.com/saphelp_nw70/helpdata/en/52/671785439b11d1896f0000e8322d00/content.htm
hope it helps you.
thanks
Sachin -
I found it cost a lot of energy . Is it true? Is there any spec to describe detail power consumption about airplay and airplay mirroring?
Welcome to the Apple Community.
The Apple TV uses 6 W, which IMO is hardly a lot of energy. -
Hi, is there a support for development ? I have a idear for a docking station. But i want to know some more details about the licence from apple and so on. Is there a special call center or can i call the normal support for my country ???
For liscensing of iOS related hardware? You'd need to contact the Made For iPod Program.
<http://developer.apple.com/ipod/>
Their contact address is <[email protected]> -
Best avenue to file complaints about bill and have them resolved
I have been a customer since before 2005 and went with Ntelos in November, I called the night I was at Ntelos to ask Verizon what my contract buy outs were and I was given the prices. The representative tried to offer me whatever promotions she could offer (there wasn't many) and I declined service (there she should have took the initiative to ask about disconnecting). Since my bf opted to keep his number his phone disconnected automatically. I was told my Verizon phone would cycle off within 24 - 48 hours by the Ntelos rep. That was not the case so I called verizon to ensure my phone would disconnect and they told it would at the end of the billing cycle (december 20) which makes sense. I understand I would be responsible for the November - December. Anyways, December 20th rolls around and mind you I've called already to ensure it will take place and it doesn't. I phone in and come to find out the person who took my orders didn't complete the disconnection and now I have to wait until January 20th for it to cycle off and I can finally pay my bill! Well get this in my November - December bill they've charged me $51 for Monthly access (I have a work discount) and $49.99 for insurance and smartphone access for 12/21 - 1/20 and won't refund my $51 as they say that I called out on the phone. I turned the phone on and had voicemails that I think I checked around the time period that they are mentioning (1 day) and that data was used (1 day) I had no outbound calls after December 11th my birthday. Because there are no comments in my account (that I specifically asked them to make) my phone should have been disconnected when I had called in the first of December... really!?! The phone should have been turned off regardless and it was one day out of 30 seriously? I mean the phone has been turned off this whole time and literally only checked to make sure Verizon did their job. I CAN'T HELP IT YOU DON'T KNOW HOW TO DO YOUR JOB, I PUT THE EFFORT IN MULTIPLE TIMES TO LET YOU KNOW MY PHONE NEEDED TO BE DISCONNECTED YOU SHOULD HAVE KEPT RECORD OF IT!!! What really heats me up is that I was told a supervisor would give me a call back after they got out of a meeting and I have not rec'd a call back yet. VERIZON Reps/Supervisors your customers are the reason why you have get a paycheck, I suggest you start treating them a little better. You can't seriously tell me giving me back my $51 for service I DID NOT USE (except according to you for one day you can't even give me details about?) is really going to hurt your pockets. I've been jerked around by your reps for the last 2 months as one told me my contracts were up in January and I shouldn't' be charged for disconnection fees at all, she credited me those termination fees but they later got rejected (after she said her supervisor approved while I was on hold) and NO ONE HAD THE COURTESY TO NOTIFY ME!
I've worked in customer service before and I'll be first to tell you that your reps are not trained very well and you have horrible ethic! You should not charge your customers for an error that was your fault; especially since it was your reps that I asked specifically to note my account and didn't (this isn't my first rodeo with you all, it should be standard procedure to give your reps time to comment before throwing them into another phone call). I'm not doing this for my health here, that $51 could buy diapers and baby food for my daughter and you are crazy if you think I'm going to let it slip through my fingers to line your pockets. I will keep escalating it until you do something about it and I don't care that you already gave me an inconvenience credit I deserve that and my $51 so don't try to justify it that way! This has been way more than an inconvenience, so don't worry I'll inconvenience you as well!
>> Edited to comply with the Verizon Wireless Terms of Service <<
Message was edited by: Verizon ModeratorWith my new provider I am only using the chat function to settle anything with them so I can save the conversations I've had with them (not that I've had any issues thus far). It should be standard procedure for them to comment your account while they are on the phone with you before hanging up. I should have been annoying and asked them to read back their comments (hindsight ugh!). I'm sorry that you are having to deal with this as well, just know you are not the only one receiving horrible customer service. I'll share with you what I wrote on their Facebook page. They really should take some accountability for their actions and have better follow up on resolving issues (or train their representatives better). I can't stand having to talk to another person time and time again explaining the same thing i just explained to 3 people before them.
Almost immediately, I received some attention after posting this:
Dear Verizon,
I am appalled, especially after reading your credo, that you are refusing to credit back money that is owed to me because your representatives didn't take the necessary time that they should have to comment (after I specifically asked) in my account after I diligently called in multiple times to ensure that my disconnection took place when it was scheduled to and was told that it would (an ongoing issue since the beginning of December). Come to find out that the representatives I spoke with prior to December 20th didn't do their jobs correctly by not entering the disconnection orders in. "Verizon Credo- a set of principles that describes our culture of integrity, respect, performance excellence and accountability. The Credo is a blueprint that directs us to live up to the highest standards possible when serving our customers, shareowners, communities and each other." Let me school you on something here because it appears that you just put that mission statement up on your website 'cause it sounds good, you certainly do not follow through! Accountability: Noun - the quality or state of being accountable; especially an obligation or willingness to accept responsibility or to account for one's actions (i.e. public officials lacking accountability). It doesn't matter that you cannot find any proof in my statements it doesn't change the fact that it happened and I am not a liar. I seriously wouldn't exhaust this must effort had I been lying. I'll take this a step further and reference your statement "we focus outward on the customer, not inward. We make it easy for customers to do business with us, by listening, anticipating and responding to their needs." First of all, when I made my initial call to you all asking what my contract buyout prices were and your rep tried to offer me promotions (or lack there of) to keep me as a customer and I declined she should have "anticipated" my need for disconnection. I shouldn't have had to jump through so many hoops to get my service disconnected from you all and pay my final bill. It's not my fault that your representatives weren't trained well enough to correctly put through disconnection orders. Based on my interactions with your customer service I could see where people would disconnect their services regularly!!!!! You are not making it easy for me to severe ties with you and conduct BUSINESS and you are not responding to my NEEDS. I think you forget that I could be a potential customer in the future. If it's one thing I learned from my Communications Degree is that negative feedback will reach more consumers vs. positive feedback of a company and how they handle their business. I have 1,000 plus facebook friends and twitter followers so I'm pretty sure my negative experience could reach quite a few people! You say you have integrity? How is it moral uprightness to charge me for a whole month of service (regardless if the phone was turned on once) for a billing period that shouldn't have existed if your customer service reps did their job correctly? I suggest that you all take a good look at the way you are treating your current customers because we are the reason you get a paycheck! You should make your customers a priority especially if they've been with you for 10 + years regardless if they are disconnecting service or not! How about following through, taking ACCOUNTABILITY and having that supervisor representative call me back from my phone conversation last night like I am a priority (how every customer should be treated) and helping me get the money that I am owed, regardless if the phone had been turned on for a short period (your rep couldn't even tell me what numbers I supposedly called - exactly the phone has been off since December 20th if not before unless turned on to confirm disconnection)! Oh but let me guess did you all forget to put that in my account comments as well? Probably like there is no mention of the formal complaint I filed against some of your representatives that there was supposedly no ticket number for. I thought I was going to regret leaving Verizon for another provider but it turns out that I only wish I would have left sooner and actually gone to a authorized dealer/ Verizon Store to process my disconnection because your customer service line is a joke! -
Is there a way to find out details about, who approved the RMA on system using front end or back end?
But is there a way (simple or not-so-simple) to find
out EVERY SINGLE FILE that's referenced on a
timeline? (I have lots of stuff imported into the
project that I know isn't used on any timeline, but
I'm afraid of moving or deleting things for fear of
never finding it again.)
I'd love to get some sort of "printout" (a list or
something) of every single file.
There is, go to browser and cntrl click on any one of the columns,
and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
Hope this helps and that I've read you properly,
Peace
P-Book 1.5, 17" 2gsRAM Mac OS X (10.4.4) FCStudio
Maybe you are looking for
-
One of the user names does not show up on the login screen
There are two admin accounts set up on the computer but only one of them shows up on the login screen. Any ideas why and how to change it? Thanks a lot. Tomek
-
The best place for content server
Hello, We need to install content Server . SAP ECC is in Paris . The users who will use the content server will be in New-York. Is the best place for content server in Paris or in New-York? The question could be : Will a document (for ex. a pdf of 10
-
I have new iPhone 5. I do not have the contact icon for my contacts
Cannot find the contacts icon on my new phone. My old iPhone 4 had this
-
Continuous data acquisition using NiDAQmx with a start and a stop trigger
I'm sorry if this has been answered many times before, I can't quite seem to find the answer I'm looking for. I am using LabWindows CVI version 7 and NiDAQmx with a PCI6023E. I wish to acquire data continuously using an external clock as a timebase -
-
BIG PROBLEMS - XEROX PHASER 3160N Driver
Hello, I have a big problem. I have just switched from Snow Leopard 10.6.2 to Lion 10.7.4 and my printer machine is offline. I have downloaded the latest driver from xerox support web page but my printer isn't work. First page it is ok but then after